This integrates the lockstep_scheduler, so that the system time is set
by the mavlink HIL_SENSOR message.
This means that the speed factor is removed and the speed is entirely
given by the simulator.
* added a parameter for enabled the smart battery
* start tel1 and tel2 at 921600 and max rate
* turned up the max tx rate on mavlink streams for telem1 and telem2
* turned off mavlink stream for tel1 in 4250_teal. This is connected to TX1 FTDI UART and has issues.
* moved check to 4250 board ID to start mpu9250s for Teal airframe into fmuv4 rc.board.
* Integrated preliminary ICM20948 support into MPU9250 driver.
Fixed temperature conversion for MPU9250/ICM20948.
* Included missing check for PX4_I2C_OBDEV_MPU9250 in main.cpp.
* Added explicit bus for internal MPU9250 on Pixhawk 2.1 to avoid implicit start
of an externally attached device with wrong orientation.
The threads running commands for clients through the Posix daemon used
to write to a char buffer through snprintf (etc.) which was then written
directly to the file descriptor, whereas in the other case printf
(etc.) was used to write to stdout (FILE*). Both versions used some
macro's and repeated code to have the same output.
This change unifies these two cases by using a FILE* in both cases. The
(line) buffering is done by the standard C library's implementation
(just like with stdout), and px4_log.c now uses the same code in all
cases (using fprintf, etc.) for printing (colored) output.
This commit is the groundwork to fix the power LED
blinking on V5
Background:
----------
Early boards only had an AMBER LED that was used to
indicate a High Load condition.
This change defines the new logical inteface
the LED_<color> should not be used in application
code moving forward, only the minipulator macros
should be used.
Logical usage Legacy default
------------------------+-------------
BOARD_OVERLOAD_LED | LED_RED
Later boards defined BOARD_HAS_CONTROL_STATUS_LEDS
and added the use of a BLUE and GREEN LED that were
used as follows:
Logical usage Legacy default
------------------------+-------------
BOARD_ARMED_LED | LED_BLUE
BOARD_ARMED_STATE_LED | LED_GREEN
With this PR a board may now define _only_ a subset
the leds and map them at the board level to the
color LED it wants to use.
Logical usage Legacy default
------------------------+-------------
BOARD_OVERLOAD_LED | LED_RED
when BOARD_HAS_CONTROL_STATUS_LEDS is defined
BOARD_ARMED_LED | LED_BLUE
BOARD_ARMED_STATE_LED | LED_GREEN
If any of the BOARD_{OVERLOAD|ARMED|ARMED_STATE}_LED are not
defined. The code output generates a null action for that
LED.
Julian Oes