fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
29,766 Commits 852 Branches 161 Tags
Commit Graph

212 Commits

Author SHA1 Message Date
Beat Küng
4f090980ab kakutef7 board_config: remove usb valid defines 
Otherwise 'system_power' gets published with voltage5v_v = 0, as there is
no 5V sensing pin, leading to Avionics Power Low preflight check failures.
 2019-07-25 10:38:57 -04:00
Beat Küng
6e833ed7a8 boards: add Holybro KakuteF7 2019-07-16 08:09:22 +02:00
Beat Küng
b7a0e1ef03 boards: simplify RC port configuration by using NuttX ioctl's 
A board only needs to define:
 #define RC_SERIAL_PORT                     "/dev/ttyS4"

Then it can optionally define one or more of the following:
 #define RC_SERIAL_SWAP_RXTX
 #define RC_SERIAL_SINGLEWIRE
 #define RC_INVERT_INPUT(_invert_true) px4_arch_gpiowrite(GPIO_SBUS_INV, _invert_true)
 2019-07-16 08:09:22 +02:00
Beat Küng
a3c920db7d board_defaults: remove unnecessary 'set MIXER_AUX none' 
On all of these boards '$USE_IO = no' will hold.
 2019-07-16 08:09:22 +02:00
Beat Küng
4b0afff33a fmu-v5 init.c: remove unused include 2019-07-16 08:09:22 +02:00
Daniel Agar
53c5b6d24f
px4_fmu-v2_multicopter disable batt_smbus 
- saves a bit of flash
 2019-07-12 15:57:35 -04:00
Timothy Scott
2ed00c9cb6 Rover: Rewrote gnd_pos_control and removed gnd_att_control (#12239) 2019-07-11 09:39:13 -04:00
Daniel Agar
d4cd1d0d2e
NuttX stm32f7 fully re-enable dcache with write back (#12435) 
- fixes https://github.com/PX4/Firmware/issues/12216
 - includes latest PX4/NuttX and apps update 7.29+
 2019-07-10 19:08:12 -04:00
Daniel Agar
dc10a68539 NuttX and apps update 7.29 2019-07-10 12:58:35 -04:00
Daniel Agar
321c2c0392 boards don't use px4_add_library for drivers_board 
- this prevents low level board support from using PX4 logging, uORB, etc
 2019-07-09 19:09:47 -04:00
Daniel Agar
6ea5853161 px4_fmu-v2_multicopter sync with px4_fmu-v2_default 2019-07-08 14:49:58 -04:00
Daniel Agar
58b74e241e px4_fmu-v2 disable mpu9250 2019-07-08 14:49:58 -04:00
Daniel Agar
26f6794aa9 px4_fmu-v2 re-enable CONSTRAINED_FLASH build 
- this limits console output at boot
 2019-07-08 14:49:58 -04:00
Daniel Agar
15d1543f95 create systemcmds/i2cdetect tool to scan i2c bus 2019-07-06 10:28:16 -04:00
David Sidrane
ea0da3a3b6 px4/fmu-v5x: GPIO ADC had bad definition 2019-07-05 12:23:06 -04:00
dlwalter
cbdfc0c587 px4_fmu-v5: rc.board_sensors start lis3mdl optional external magnetometer 2019-07-01 14:52:14 -04:00
David Sidrane
31dfaee76a fmuv5x board support 2019-06-26 14:34:02 -04:00
Daniel Agar
5f20d3cf3b Jenkins HIL increase boot timeout for stackcheck build 
- px4_fmu-v5_stackcheck remove extra drivers (to try and get the system
usuable)
 2019-06-15 16:59:04 -04:00
David Sidrane
6eb4cf0ceb Add CUAV 5+ and Nano to fmu-v5 manifest 
* rcS: Set SYS_USE_IO for Nano
 2019-06-14 13:19:41 -04:00
Daniel Agar
bef7a9ba8e
NuttX boards increase task limit 32 -> 64 (#12230) 2019-06-10 09:42:36 -04:00
BazookaJoe1900
b0176dc88a Pr cleanup board files (#12218) 
Clear non exist functions definitions
Added RC Serial note before its relevant definitions
 2019-06-08 15:48:53 -07:00
Beat Küng
ab0466eddf omnibus: enable dmesg buffer (3kb) 
without LPE running, we have about 17.6 kb more free RAM.
 2019-06-06 11:11:44 -04:00
Beat Küng
223e3c6429 aerofc rc.board_defaults: remove wrong parameter settings 
This was a regression.
 2019-06-06 11:11:44 -04:00
Beat Küng
73102dc3c4 SYS_MC_EST_GROUP: add q estimator only option and activate on omnibus 2019-06-06 11:11:44 -04:00
Beat Küng
1321f96b59 omnibus rc.board_defaults: remove flash-based params transition logic 2019-06-06 11:11:44 -04:00
Tanja Baumann
fcec3b3efc px4_fmu-v4: increase uart buffer sizes for vision algorithms (#12199) 2019-06-06 09:01:42 -04:00
David Sidrane
79eb74be3f Fix bmp280 on FMUv4 2019-06-05 15:43:53 -04:00
Beat Küng
d947818654 console: add simple dmesg functionality (enable only on v5) 2019-06-04 11:57:54 +02:00
Daniel Agar
b57dff8594 fxas21002c move to PX4Gyroscope and cleanup 2019-05-31 18:20:32 -04:00
Daniel Agar
f85c15e247 board common create generic dma allocator (from fat_dma_alloc) 2019-05-30 19:31:40 -04:00
Mohammed Kabir
b334b75886 Move optical flow drivers to own subdirectory 2019-05-28 23:23:38 -04:00
Daniel Agar
162405479b
device drivers lib add linux spi support 2019-05-20 12:18:56 -04:00
David Sidrane
ed8c6019d5 Added TI ina226 I2C power monitor (#11755) 2019-05-17 13:33:48 -04:00
Daniel Agar
f067ca0d8f
fmu-v2 & fmu-v5 add missing tone_alarm to example board variants 
- fixes #12012
 2019-05-13 15:49:22 -04:00
Bart Slinger
ebf8bc898a fix bebop upload script 2019-05-11 14:39:42 +01:00
Julian Oes
e6621bf7fb boards: ignore sih for Snappy 
When sih (simulation in hardware) was compiled for Snapdragon, we got
the linking problem below. I'm not sure why, supposedly the symbol
`double sin(double)` is missing.

undefined PLT symbol _LSin (705) /libpx4.so (symbol.c:303)
 2019-05-06 12:06:01 -04:00
Daniel Agar
5d7a82b8e2 av/x-v1 support PMW3901 on SPI2 (now treated as external) 2019-04-30 02:27:29 -04:00
Daniel Agar
db5dbb25b3 av/x-v1 board support cleanup and sync with fmu-v5 2019-04-30 02:27:29 -04:00
Beat Küng
226f3c0999 rc.board_sensors: probe for external qmc5883 2019-04-15 10:37:06 +02:00
Beat Küng
914a9b78b6 new airframe for sih, HIL_STATE_QUATERION sent through MAVLink 2019-04-12 09:25:07 +02:00
romain
c09e9ec97f simulator in hardware, new module added that allows to run a simulator in the hardware autopilot, for more documentation visit https://github.com/romain-chiap/PX4_SIH_QuadX 2019-04-12 09:25:07 +02:00
Andreas Daniel Antener
95a0803b14 Adding AK09916 driver to support the Here2 GNSS emulated mag (I2C) (#11837) 
* drivers, magnetometer: added ak09916 driver to support the mag driver emulated by the Here2 gps
* boards: set yaw 270 rotation for external ak09916 driver and only start it for the PH21
* drivers: only start ak09916 when icm20948 is not available on a ph21 setup
 2019-04-11 12:43:50 -04:00
Daniel Agar
5a50f96bcf
move icm20948 (Here GPS compass) to Cube sensors start (#11838) 2019-04-11 11:15:53 -04:00
David Sidrane
dbd02b1e47 px4io:Detect Running on Cube and set GPIO for heater 
Addresses #11832 - configure the mixed use GPIO
   that can be the a BLue LED or a Heater as PUSH
   PULL on Cube as to not let the heater input float.
 2019-04-11 08:34:22 +02:00
Chris Lovett
b6120f39f3 Merge pull request #11826 from lovettchris/review/add_pwm_out_sim 
Add back pwm out sim module so HITL simulation works again.
 2019-04-10 09:39:23 +02:00
Beat Küng
d9f8e37288 omnibus: use default clock rate of 20 MHz for SD card (CONFIG_MMCSD_SPICLOCK) 
With 24 MHz accesses to the SD card were unreliable. And the chance of
failure recently got worse, so that logging became impossible.
 2019-04-08 10:44:30 +02:00
David Sidrane
46c4a68b62 fmu-v5: Move stage 0 dcache disable to later in boot (#11791) 2019-04-04 11:07:28 -04:00
David Sidrane
1c212e3f84 M7 dcache ctrl via a parameter (#11769) 
* Support for armv7-m_dcache control via parameter

  The FORCE_F7_DCACHE parameter can be set to
   0 - (default) if Eratta exits turn dcache off else leave it on
   1 -  Force it off
   2 -  Force it on

   At boot the system will disable the d-cache if the silicon
   has the 1259864 Data corruption in a sequence of Write-Through
   stores and loads eratta.

   Post nsh script execution the FORCE_F7_DCACHE paramater
   will be used to set the d-cache to the state indicated
   above.
 2019-04-03 16:14:19 -04:00
mcsauder
e6f1a2db12 Delete trailing whitespace, extra newlines, to quiet git hooks and add an extra = so that it does not appear to git as a merge conflict marker. 2019-04-02 15:31:37 -04:00
David Sidrane
1250fb1b48 RGB order now matchs layout 2019-04-02 13:40:17 -04:00