bca78c0379
boards: CUAV Nora disable icm20649 until SPI6 BDMA is working
2021-02-22 21:24:59 -05:00
bcae99e34a
boards: CUAV Nora don't start icm20649 on SPI6 by default
...
- waiting on NuttX SPI6 BDMA to be fixed
2021-02-22 12:11:16 -05:00
414f9f81d9
move fake GPS to standalone module
2021-02-20 14:13:36 -05:00
5dc5ebc0a1
boards: cleanup uavcan test targets (v1 and v0 embedded peripherals)
2021-02-18 11:54:41 -05:00
46eb790188
boards: new uavcan board variants remove delete mkblctrl driver
2021-02-17 22:47:35 -05:00
e0e796a2b9
ROMFS:Bake in UAVCAN FW with builds that end in _uavcan
...
The configuration are mostly for testing now.
2021-02-17 22:47:35 -05:00
57195843bf
cuav_can-gps-v1:Use for ALT Bootloader an Option
2021-02-17 22:47:35 -05:00
3f6388f9a1
uav_can-gps-v1:Use common uavcan board identity
2021-02-17 22:47:35 -05:00
28030e96e2
cuav_can-gps-v1:UavcanNode app ensure IWDG off in debuger
2021-02-17 22:47:35 -05:00
5c80b2d3dd
cuav_can-gps-v1:canbootloader - enable SWD and Pause IWDT whils stepping
2021-02-17 22:47:35 -05:00
c7182d5453
cuav_can-gps-v1:CMakeList remove .h files
2021-02-17 22:47:35 -05:00
878baabce8
cuav GPS use appdes
2021-02-17 22:47:35 -05:00
ab0d0fd0be
uORB move to PX4 platform layer
2021-02-17 11:25:56 -05:00
44df0fb7a2
Analog Devices ADIS16448 rewrite
...
- new IMU driver structure with state machine (no sleeps in bus thread)
- verify all configured registers and trigger reset on failure
- detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
- don't use CRC-16 on burst transfers except for verified lots
2021-02-16 10:29:07 +01:00
fb2a199621
delete unmaintaned mkblctrl driver
2021-02-14 10:38:15 +01:00
a257120e8d
boards: use new param default mechanism
2021-02-12 08:27:47 -05:00
8a0bf15b9e
boards: CUAV X7Pro fix BMI088 orientation
2021-02-11 23:05:48 -05:00
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
a2442ffb48
board: enable UAVCAN sensors by default on F7/H7
2021-02-02 09:01:12 +01:00
78dff6adcb
boards: add CONSTRAINED_MEMORY build option
...
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
- limits number of EKF2 multi instances to 2.
- enabled on all cortex m4 boards
2021-02-01 08:56:22 +01:00
318c7e83b3
support up to PWM 14
...
- generate PWM_MAIN 1-14
- generate PWM_AUX 1-8
- generate PWM_EXTRA 1-8
- px4io and pwm_out directly read configuration parameters
- only available and active physical outputs are actually shown for configuration
- overall saves flash despite adding many new parameters
2021-01-30 15:55:53 +01:00
e30b8495b8
Enable x7pro and nora spi4 DMA
2021-01-29 21:30:12 -05:00
f0d1f1d679
boards: disable BDMA on STM32H7 for now
2021-01-28 21:16:23 +01:00
2308cb8a40
CUAV CAN GPS support UAVCAN standard/indication/Button.uavcan
...
Co-authored-by: Daniel Agar <daniel@agar.ca >
2021-01-27 10:46:49 -05:00
ab650373d6
cuav gps:Add Beep indication
2021-01-26 17:04:40 -05:00
b422da45ec
boot_app_shared automatically generate UAVCAN bootable image
2021-01-26 10:21:29 -08:00
347c185967
UAVCAN bootloader merge duplicate boot_app_shared
2021-01-26 10:21:29 -08:00
350ebf5a1f
boards: CUAV CAN GPS flash based parameters
2021-01-26 08:06:54 -08:00
7800f94dcb
cuav_can-gps-v1 Use SK6812 Serial PWM LED Driver
2021-01-23 09:30:59 -05:00
fdba8f1f23
cuav_can-gps-v1:Use corrected pinout
2021-01-23 09:30:59 -05:00
e4d223f098
boards: CUAV Nora fix BMI088 orientation
2021-01-17 23:19:18 -05:00
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
e96571b45d
uavcannode: GPS working on cuav_can-gps-v1
...
- use sensor_gps directly from sensor rather than vehicle_gps_position (aggregated value)
2021-01-13 22:06:46 -05:00
58909b208d
boards: cuav can-gps-v1 add safety button and LED
2021-01-13 22:06:46 -05:00
1ac70cc72f
can-gps-v1:Correct Memory size used by app and bootloader size
2021-01-13 22:06:46 -05:00
618bd5978a
can-gps-v1:canbootloader SAFETY is GETNODEINFO_JUMPER
2021-01-13 22:06:46 -05:00
177109a1af
can-gps-v1:LED Trimming
2021-01-13 22:06:46 -05:00
238c28d458
SK6812 Led driver
2021-01-13 22:06:46 -05:00
85bd04f0c7
can-gps-v1:canbootloader Fixed
2021-01-13 22:06:46 -05:00
3e08fd6682
can-gps-v1: Removed GPIO_CAN_CTRL
2021-01-13 22:06:46 -05:00
c2c92cb2c8
can-gps-v1: Added LED pin
2021-01-13 22:06:46 -05:00
cdae8bf168
can-gps-v1:Fixed Clock
2021-01-13 22:06:46 -05:00
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
763c3b8fda
boards: start enabling multi-EKF by default on F7/H7
2021-01-10 17:56:34 +01:00
7545249215
Add flight_mode_manager to all targets with mc_pos_control
2020-12-30 10:25:08 -05:00
22bc176885
Added mft for queries
2020-12-02 20:40:23 -05:00
16f388d625
cuav_x7pro: Use px4_platform_configure
2020-12-02 20:40:23 -05:00
26e164c3ba
cuav_nora: Use px4_platform_configure
2020-12-02 20:40:23 -05:00
79f177fe94
cuav_can-gps-v1: Use px4_platform_configure
2020-12-02 20:40:23 -05:00
e399dbc440
boards: CUAV Nora support cuav_neo_v2_pro and disable CONFIG_STM32H7_BDMA
2020-11-13 09:45:57 -05:00
Daniel Agar