fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-21 06:33:33 +08:00
Code Issues Packages Projects Releases Wiki Activity
47,880 Commits 852 Branches 161 Tags
pr-ekf2_range_quality_bugfix
Commit Graph
98 Commits
Author SHA1 Message Date
Alexander Lerach 2ecc7226e6 common_rc: enable on v5x/v6x/v6s, disable rc_input 2025-07-30 15:09:39 +02:00
Alexander Lerach 047578a844 Disarm PWM ESCs before reboot 2025-02-10 18:16:48 +01:00
Daniele PettenuzzoandNiklas Hauser 35239c48a2 Board: Fix fmu rc_input on v5x and v6x (#23175) 
Co-authored-by: Niklas Hauser <niklas@auterion.com>
 2024-09-25 15:57:46 +02:00
BazookaJoe1900 4d83badba1 fix files tags on the header comments (#23564) 2024-09-19 09:25:18 +03:00
David Sidrane dc73d5d634 px4_fmu-v5x:Use BOARD_HAS_HW_SPLIT_VERSIONING & common PAB manifest 2024-01-30 11:15:03 -05:00
David Sidrane 81f3542113 boards:Needing Migration to BOARD_HAS_HW_SPLIT_VERSIONING 2024-01-30 11:15:03 -05:00
Igor Mišić c1dbe177b8 boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
Niklas Hauser 8fe65c6722 Driver: Refactor MCP23009 GPIO expander into uORB driver 2023-06-19 07:58:21 +02:00
Daniel Agar 45912066d2 fix copyright header year range 2023-01-14 09:16:16 -05:00
David Sidrane 9faa8e23e8 NuttX Upgrade CONFIG_LIB_BOARDCTL->CONFIG_BOARDCTL 2022-11-22 14:30:08 -05:00
Daniel AgarPeter van der PerkDavid Sidranealexklimaj
 		2cb4ef0629 NuttX 10.3+ upgrade (#20190) 
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
 2022-11-20 20:28:07 -05:00
Igor Mišić 815eed2c6d mtd: add support for extended HW revision 2022-11-10 07:45:44 +01:00
Julian Oes d78de90fc8 fmu-v5x: alias for duplicates, remove commented 
- Removed commented out config data.
- hw_mft_list_v0540 was the same as hw_mft_list_v0500
 2022-09-20 08:26:16 -04:00
Julian Oes f05fccebb7 fmu-v5x: disable rev0 for HB Mini and CM4 base 
As I understand it, only Rev 1 and Rev 2 were shipped by HB, and likely
to be used for the Mini and CM4.
 2022-09-08 20:54:19 -04:00
Vincentpoont2 f476ebdcbf Correct BOARD_NUM_SPI_CFG_HW_VERSIONS at board_config.h 2022-09-08 20:54:19 -04:00
Vincentpoont2 9d5adf8bab Fix Error on manifest.c 2022-09-08 20:54:19 -04:00
Vincentpoont2 e91295e5db Fix Error on board_config.h Define on FMUv5X & FMUv6X 2022-09-08 20:54:19 -04:00
Vincentpoont2 b16a53018d Add Holybro Pixhawk Pi CM4 Baseboard Support 2022-09-08 20:54:19 -04:00
Igor MišićandDavid Sidrane 4b503c310e Merge PR #19575 (changes to pr-extendend_hw_ver_rev_format) 
- 4096 of 3 hex digits each for rev and ver is enough.
    #defines used in SPI versions do not be long format, use use the macro
 - Board provides a prefix and the formatting is sized and built in
 - No need for funky board_get_base_eeprom_mtd_manifest interface
    Original mft is used where the abstraction is done with the MFT interface

Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
 2022-07-05 09:29:26 +02:00
Igor Mišić 8b77d68028 board/fmu-v5x: add new board version V5X00100001 2022-07-05 09:29:26 +02:00
Igor Mišić ec1614d156 boards: update id string from V5X{0-a}{0-a} to V5X{xxxx}{xxxx} 
boards: new format for hwtypecmp string
boards: update manifest.c to follow the new hw_ver_rev format
 2022-07-05 09:29:26 +02:00
Igor Mišić dd38ced7c4 fmu-v5x: use mtd to get hw info from base EEPROM 2022-07-05 09:29:26 +02:00
Igor Mišić 3463b725a5 px4_manifest: fix px4_mft_s to accept multiple manifests 2022-07-05 09:29:26 +02:00
Igor Mišić 08a9e49f3e px4_mtd: update eeprom at24c driver to initialize multiple instances 2022-07-05 09:29:26 +02:00
David Sidrane 9353c15e8a px4_fmu-v5X:Added Holybro mini base board 2022-05-27 15:02:28 -04:00
Daniel Agar 376201e64d boards: px4_fmu-v5/v5x init all I2C pins 2022-05-24 11:02:03 -04:00
David Sidrane c0facec889 cdc_acm_check:Prevent USB disconect on param save 
If the hardware support RESET lockout that has nArmed ANDed with VBUS
   vbus_sense may drop during a param save which uses
   BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE to prevent external resets
   while writing the params.  If we are not armed and nARMRED is low
   we are in such a lock out so ignore changes on VBUS_SENSE during this
   time.
 2022-02-21 10:56:41 +01:00
Jukka Laitinen 03c0a2d56c Fix some cmake / linker depenencies for boards 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-27 12:42:40 -05:00
Beat Küng 92769bd2b2 dshot: remove BOARD_DSHOT_MOTOR_ASSIGNMENT & handle timer channel gaps 2022-01-21 20:41:15 -05:00
Beat Küng ca6df035b4 px4/fmu-v5x: add arch_io_pins dependency (required in init.cpp) 2021-12-10 09:03:08 -05:00
Beat Küng 4a4acf7ead px4/fmu-v5x: add capture pins to list of pwm pins 2021-10-18 18:45:19 -04:00
Daniel Agar bbfaa4694c boards: cleanup serial RX DMA hrt_call_every 
- remove ts_to_abstime dependency
 2021-10-06 14:39:59 -04:00
Beat Küng c5c80e31b6 boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h 2021-09-08 16:10:24 -04:00
Beat Küng a8e75d174c boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS 2021-09-08 16:10:24 -04:00
Kirill Shilov e13884410b heater: added support of inverted IMU heat controller output 2021-07-20 10:37:53 -04:00
David Sidrane 05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
David Sidrane 62fd132047 boards:Use inttypes 
nxp_ucans32k146:Fix constant

spracing_h7extreme:Use inttypes
 2021-06-16 17:07:47 +02:00
David Sidrane 32e92ba817 Revert:Pull downs - bad levels cause motor spins 2021-06-01 15:18:47 -04:00
David Sidrane e87a6c755d px4_fmu-v5x:Add support for Revision 2 FMUM HW using ICM20649 not BMI088 2021-05-10 09:11:50 +02:00
David Sidrane 7dd57d55f6 px4_fmu-v5x: Initalize PWM as input with Pull Downs 2021-05-05 20:48:06 +02:00
dino 6d04a67b02 Moving define to microhal.h files, for each ST architecture. Correct channels were verified with ST_CUBE header files. For the H7 its a simplification for the current used H7x3. Other devices in that family expect the temperarture on channel 18. 
F1: channel 16
F3: channel 16
F4: channel 18
F7: channel 18
H7: channel 17, on STMf32Hx3
 2021-03-18 06:13:24 -07:00
dino 3c77ef7eb3 Fixed adc config, to read internal reference to get cpu temperature 2021-03-18 06:13:24 -07:00
Lorenz Meier 4c9b2c65b5 Support v5X build variants 
This adds support for the different implementation variants of the v5X standard.
 2021-02-14 11:17:28 +01:00
Lorenz Meier 80b8e6a48f v5X: Register board variants 
This is needed to properly identify new variants.
 2021-02-11 22:14:02 +01:00
David Sidrane ed996e2dd1 fmu-v5x:Add net monitoring an DHCP 
px4_fmu-v5x:Use Bin Net settigns
 2021-01-31 14:42:09 +01:00
Beat Küng e2337a34eb system_power: add comp_5v_valid and can1_gps1_5v_valid 
And fill it in from the v5x GPIO expander.
 2021-01-15 10:57:20 -05:00
Beat Küng 88fe047556 px4/v5x: enable mcp23009 GPIO driver 2021-01-15 10:57:20 -05:00
Beat Küng 26e8c231b0 v5x,v6x: move mtd_caldata after mtd_id partition 
to avoid losing factory calibration params on existing setups
 2021-01-15 10:57:20 -05:00
Beat Küng 9f5dee2ecf v5x/v6x: update IMU sensors (remove ISM330DLC) 2021-01-12 09:55:59 -05:00
David Sidrane a60df85a09 px4_fmu-v5x:Use px4_platform_configure 2020-12-02 20:40:23 -05:00