Use Rangefinder

A user configurable delay for the internal `vehicle_local_position` seems confusing in my eyes. It's a different timeout for fixed-wing and multirotor which might have made sense earlier but not really anymore since the topic is constantly published by the estimator and not expected to time out on either vehicle type and the parameter description is also misleading because it's outdated.

.ci/Jenkinsfile-compile

@@ -1,230 +0,0 @@
-#!/usr/bin/env groovy
-
-pipeline {
-  agent none
-  stages {
-
-    stage('Build') {
-      steps {
-        script {
-          def build_nodes = [:]
-          def docker_images = [
-            armhf: "px4io/px4-dev-armhf:2023-06-26",
-            arm64: "px4io/px4-dev-aarch64:2022-08-12",
-            base: "px4io/px4-dev-ros2-foxy:2022-08-12",
-            nuttx: "px4io/px4-dev-nuttx-focal:2022-08-12",
-          ]
-
-          def armhf_builds = [
-            target: ["beaglebone_blue_default", "emlid_navio2_default", "px4_raspberrypi_default", "scumaker_pilotpi_default"],
-            image: docker_images.armhf,
-            archive: false
-          ]
-
-          def arm64_builds = [
-            target: ["scumaker_pilotpi_arm64"],
-            image: docker_images.arm64,
-            archive: false
-          ]
-
-          def base_builds = [
-            target: ["px4_sitl_default"],
-            image: docker_images.base,
-            archive: false
-          ]
-
-          def nuttx_builds_archive = [
-            target: [
-                     "3dr_ctrl-zero-h7-oem-revg_default",
-                     "airmind_mindpx-v2_default",
-                     "ark_can-flow_canbootloader",
-                     "ark_can-flow_default",
-                     "ark_can-gps_canbootloader",
-                     "ark_can-gps_default",
-                     "ark_can-rtk-gps_canbootloader",
-                     "ark_can-rtk-gps_default",
-                     "ark_cannode_canbootloader",
-                     "ark_cannode_default",
-                     "ark_fmu-v6x_bootloader",
-                     "ark_fmu-v6x_default",
-                     "ark_fpv_bootloader",
-                     "ark_fpv_default",
-                     "ark_pi6x_bootloader",
-                     "ark_pi6x_default",
-                     "atl_mantis-edu_default",
-                     "av_x-v1_default",
-                     "bitcraze_crazyflie21_default",
-                     "bitcraze_crazyflie_default",
-                     "cuav_7-nano_default",
-                     "cuav_can-gps-v1_canbootloader",
-                     "cuav_can-gps-v1_default",
-                     "cuav_nora_default",
-                     "cuav_x7pro_default",
-                     "cubepilot_cubeorange_default",
-                     "cubepilot_cubeorangeplus_default",
-                     "cubepilot_cubeyellow_default",
-                     "diatone_mamba-f405-mk2_default",
-                     "flywoo_gn-f405_default",
-                     "freefly_can-rtk-gps_canbootloader",
-                     "freefly_can-rtk-gps_default",
-                     "holybro_can-gps-v1_canbootloader",
-                     "holybro_can-gps-v1_default",
-                     "holybro_durandal-v1_default",
-                     "holybro_kakutef7_default",
-                     "holybro_kakuteh7_default",
-                     "holybro_kakuteh7mini_default",
-                     "holybro_kakuteh7v2_default",
-                     "holybro_pix32v5_default",
-                     "matek_gnss-m9n-f4_canbootloader",
-                     "matek_gnss-m9n-f4_default",
-                     "matek_h743-mini_default",
-                     "matek_h743-slim_default",
-                     "matek_h743_default",
-                     "micoair_h743_default",
-                     "modalai_fc-v1_default",
-                     "modalai_fc-v2_default",
-                     "mro_ctrl-zero-classic_default",
-                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-f7_default",
-                     "mro_ctrl-zero-h7-oem_default",
-                     "mro_ctrl-zero-h7_default",
-                     "mro_pixracerpro_default",
-                     "mro_x21-777_default",
-                     "mro_x21_default",
-                     "nxp_fmuk66-e_default",
-                     "nxp_fmuk66-e_socketcan",
-                     "nxp_fmuk66-v3_default",
-                     "nxp_fmuk66-v3_socketcan",
-                     "nxp_mr-canhubk3_default",
-                     "nxp_ucans32k146_canbootloader",
-                     "nxp_ucans32k146_default",
-                     "omnibus_f4sd_default",
-                     "px4_fmu-v2_default",
-                     "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lto",
-                     "px4_fmu-v2_multicopter",
-                     "px4_fmu-v2_rover",
-                     "px4_fmu-v3_default",
-                     "px4_fmu-v4_default",
-                     "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_cyphal",
-                     "px4_fmu-v5_debug",
-                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_lto",
-                     "px4_fmu-v5_rover",
-                     "px4_fmu-v5_stackcheck",
-                     "px4_fmu-v5_uavcanv0periph",
-                     "px4_fmu-v5x_default",
-                     "px4_fmu-v5x_rover",
-                     "px4_fmu-v6c_default",
-                     "px4_fmu-v6c_rover",
-                     "px4_fmu-v6u_default",
-                     "px4_fmu-v6u_rover",
-                     "px4_fmu-v6x_default",
-                     "px4_fmu-v6x_rover",
-                     "px4_fmu-v6xrt_bootloader",
-                     "px4_fmu-v6xrt_default",
-                     "px4_fmu-v6xrt_rover",
-                     "px4_io-v2_default",
-                     "raspberrypi_pico_default",
-                     "siyi_n7_default",
-                     "sky-drones_smartap-airlink_default",
-                     "spracing_h7extreme_default",
-                     "thepeach_k1_default",
-                     "thepeach_r1_default",
-                     "uvify_core_default",
-                     "x-mav_ap-h743v2_default",
-                     "zeroone_x6_bootloader",
-                     "zeroone_x6_default",
-            ],
-            image: docker_images.nuttx,
-            archive: true
-          ]
-
-          def docker_builds = [
-            armhf_builds, base_builds, nuttx_builds_archive
-          ]
-
-          for (def build_type = 0; build_type < docker_builds.size(); build_type++) {
-            for (def build_target = 0; build_target < docker_builds[build_type].target.size(); build_target++) {
-              build_nodes.put(docker_builds[build_type].target[build_target],
-                createBuildNode(docker_builds[build_type].archive, docker_builds[build_type].image, docker_builds[build_type].target[build_target])
-                )
-            }
-          }
-
-        parallel build_nodes
-
-        } // script
-      } // steps
-    } // stage Build
-
-    // TODO: actually upload artifacts to S3
-    // stage('S3 Upload') {
-    //   agent {
-    //     docker { image 'px4io/px4-dev-base-focal:2021-09-08' }
-    //   }
-    //   options {
-    //         skipDefaultCheckout()
-    //   }
-    //   when {
-    //     anyOf {
-    //       branch 'master'
-    //       branch 'beta'
-    //       branch 'stable'
-    //       branch 'pr-jenkins' // for testing
-    //     }
-    //   }
-    //   steps {
-    //     sh 'echo "uploading to S3"'
-    //   }
-    // }
-
-  } // stages
-  environment {
-    CCACHE_DIR = '/tmp/ccache'
-    CI = true
-  }
-  options {
-    buildDiscarder(logRotator(numToKeepStr: '5', artifactDaysToKeepStr: '14'))
-    timeout(time: 120, unit: 'MINUTES')
-  }
-}
-
-def createBuildNode(Boolean archive, String docker_image, String target) {
-  return {
-
-    bypass_entrypoint = ''
-
-    node {
-      docker.withRegistry('https://registry.hub.docker.com', 'docker_hub_dagar') {
-        docker.image(docker_image).inside('-e CCACHE_BASEDIR=${WORKSPACE} -v ${CCACHE_DIR}:${CCACHE_DIR}:rw' + bypass_entrypoint) {
-          stage(target) {
-            try {
-              sh('export')
-              checkout(scm)
-              sh('make distclean; git clean -ff -x -d .')
-              sh('git fetch --tags')
-              sh('ccache -s')
-              sh('make ' + target)
-              sh('ccache -s')
-              sh('make sizes')
-              if (archive) {
-                archiveArtifacts(allowEmptyArchive: false, artifacts: 'build/*/*.px4, build/*/*.elf, build/*/*.bin', fingerprint: true, onlyIfSuccessful: true)
-              }
-              sh('make ' + target + ' package')
-              archiveArtifacts(allowEmptyArchive: true, artifacts: 'build/*/*.tar.bz2', fingerprint: true, onlyIfSuccessful: true)
-              archiveArtifacts(allowEmptyArchive: true, artifacts: 'build/*/*.deb', fingerprint: true, onlyIfSuccessful: true)
-            }
-            catch (exc) {
-              throw (exc)
-            }
-            finally {
-              sh('make distclean; git clean -ff -x -d .')
-            }
-          }
-        }
-      }
-    }
-  }
-}

.ci/Jenkinsfile-hardware

@@ -1,904 +0,0 @@
-#!/usr/bin/env groovy
-
-pipeline {
-  agent none
-  stages {
-    stage('Hardware Test') {
-
-      parallel {
-
-        stage("cubepilot_cubeorange_test") {
-          stages {
-            stage("build cubepilot_cubeorange_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make cubepilot_cubeorange_bootloader'
-                sh 'make cubepilot_cubeorange_test'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*, build/cubepilot_cubeorange_test/etc/init.d/airframes/*', name: 'cubepilot_cubeorange_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'cubepilot_cubeorange'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'cubepilot_cubeorange_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_bootloader/cubepilot_cubeorange_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    // run tests
-                    runTests()
-
-                    // load all airframes
-                    // sh("./Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` `cd build/cubepilot_cubeorange_test/etc/init.d/airframes/; find . -regex '.*/[0-9].*' -exec basename {} \\; | cut -d '_' -f 1` || true") // test loading all airframes\
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("cuav_x7pro_test") {
-          stages {
-            stage("build cuav_x7pro_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make cuav_x7pro_bootloader'
-                sh 'make cuav_x7pro_test'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'cuav_x7pro_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'cuav_x7pro'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'cuav_x7pro_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_bootloader/cuav_x7pro_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v4_test") {
-          stages {
-            stage("build px4_fmu-v4_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v4_test'
-                sh 'make px4_fmu-v4_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v4'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v4pro_test") {
-          stages {
-            stage("build px4_fmu-v4pro_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v4pro_test'
-                sh 'make px4_fmu-v4pro_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4pro_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v4pro'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4pro_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v5_debug") {
-          stages {
-            stage("build px4_fmu-v5_debug") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v5_debug'
-                sh 'make px4_fmu-v5_debug bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_debug'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v5'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_debug'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600 || true'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
-
-                    // test dataman
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman" --ignore-stdout-errors'
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-                    checkStatus()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v5_stackcheck") {
-          stages {
-            stage("build px4_fmu-v5_stackcheck") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v5_stackcheck'
-                sh 'make px4_fmu-v5_stackcheck bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_stackcheck'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v5'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_stackcheck'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
-
-                    // test dataman
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman" --ignore-stdout-errors'
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-                    checkStatus()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v5_test") {
-          stages {
-            stage("build px4_fmu-v5_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v5_test'
-                sh 'make px4_fmu-v5_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v5'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("nxp_fmuk66-v3_test") {
-          stages {
-            stage("build nxp_fmuk66-v3_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make nxp_fmuk66-v3_test'
-                //sh 'make nxp_fmuk66-v3_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'nxp_fmuk66-v3_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'nxp_fmuk66-v3'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'nxp_fmuk66-v3_test'
-                    //sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-      } // parallel
-    } // stage Hardware Test
-  } // stages
-  environment {
-    CCACHE_DIR = '/tmp/ccache'
-    CCACHE_NOHASHDIR = 1
-    CI = true
-  }
-  options {
-    buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
-    timeout(time: 180, unit: 'MINUTES')
-    skipDefaultCheckout()
-  }
-}
-
-void checkoutSCM() {
-  retry(3) {
-    checkout scm
-    sh 'export'
-    sh 'make distclean; git clean -ff -x -d .'
-    sh 'git fetch --tags'
-    sh 'ccache -z'
-  }
-}
-
-void quickCalibrate() {
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters before
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
-}
-
-void checkStatus() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-
-  // status commands
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-}
-
-void resetParameters() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param reset_all"'
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "CBRK_BUZZER" --value "782097"'
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SDLOG_DIRS_MAX" --value "1"'
-}
-
-void runTests() {
-
-  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001'
-
-  resetParameters()
-
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_IMU_AUTOCAL" --value "0" || true' // disable during testing
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_MAG_AUTOCAL" --value "0" || true' // disable during testing
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink_tests" || true' // TODO
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params" || true' // expected to fail after erase
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
-
-  // tests (stop modules first)
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander stop"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink stop-all"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "navigator stop"'
-  sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'
-
-  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
-}
-
-void printTopics() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
-
-  // these are for casually inspecting the system, output failure doesn't matter
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_0" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_1" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_2" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_outputs" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_validated" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_wind" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener commander_state" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_local_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_odometry" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_optical_flow_vel" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_selector_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_sensor_bias" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_states" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status_flags" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_wind" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener event" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener heater_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener input_rc" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener led_control" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener log_message" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener logger_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener manual_control_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mavlink_log" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mission" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener multirotor_motor_limits" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener optical_flow" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener parameter_update" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_controller_landing_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_setpoint_triplet" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener radio_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener rate_ctrl_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener safety" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fft" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_preflight_mag" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_selection" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensors_status_imu" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener task_stack_info" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener trajectory_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command_ack" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_control_mode" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_land_detected" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_magnetometer" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener failsafe_flags" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status" || true'
-}
-
-void resetBoard() {
-  resetParameters()
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "echo > /fs/microsd/.format" || true'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-}

.github/workflows/build_all_targets.yml

@@ -6,11 +6,6 @@
 name: Build all targets
 
 on:
-  workflow_dispatch:
-    inputs:
-      tag:
-        required: true
-        description: release version
   push:
     tags:
       - 'v*'
@@ -27,7 +22,7 @@ jobs:
   group_targets:
     name: Scan for Board Targets
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     outputs:
       matrix: ${{ steps.set-matrix.outputs.matrix }}
       timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
@@ -36,6 +31,10 @@ jobs:
     steps:
       - uses: actions/checkout@v4
 
+      - name: Update python packaging to avoid canonicalize_version() error
+        run: |
+            pip3 install -U packaging
+
       - name: Install Python Dependencies
         uses: py-actions/py-dependency-install@v4
         with:
@@ -47,34 +46,24 @@ jobs:
       - id: set-timestamp
         run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
 
-      # This job is also triggered with versioned tags
-      #   Creating a and pushing a tag starting with "v" just as "v1.0.0"
-      #   will trigger this workflow and when all builds are done create a Github Release
-      #   then it will upload all binaries built as assets
-      # Additionally, we can also trigger this step manually
-      #   From the Github Actions tab for this repository:
-      #   https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml
-      #   You can now click a "Run Workflow" button that will prompt you for a tag name
-      #   This tag name has to match an existing tag otherwise the new release will be detached
-      #   Note: Only developers with "write" permission to the repository can use this feature
-      - id: set-tag
-        if: startsWith(github.ref, 'refs/tags/v') || github.event_name == 'workflow_dispatch'
-        run: echo "::set-output name=tagname::${{ github.event_name == 'workflow_dispatch' && inputs.tag || github.ref_name }}"
-
       - id: set-branch
         run: echo "::set-output name=branchname::${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}"
 
       - name: Debug Matrix Output
         if: runner.debug == '1'
-        run: echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"
+        run: |
+          echo "${{ steps.set-timestamp.outputs.timestamp }}"
+          echo "${{ steps.set-branch.outputs.branchname }}"
+          echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"
 
   setup:
     name: Build Group [${{ matrix.group }}]
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     needs: group_targets
     strategy:
       matrix: ${{ fromJson(needs.group_targets.outputs.matrix) }}
+      fail-fast: false
     container:
       image: ${{ matrix.container }}
     steps:
@@ -123,7 +112,7 @@ jobs:
   artifacts:
     name: Upload Artifacts to S3
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     needs: [setup, group_targets]
     if: contains(fromJSON('["main", "stable", "beta"]'), needs.group_targets.outputs.branchname)
     steps:
@@ -152,22 +141,18 @@ jobs:
   release:
     name: Create Release and Upload Artifacts
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     needs: [setup, group_targets]
-    if: startsWith(github.ref, 'refs/tags/v') || github.event_name == 'workflow_dispatch'
+    if: startsWith(github.ref, 'refs/tags/v')
     steps:
       - name: Download Artifacts
         uses: actions/download-artifact@v4
-
-      - name: Arrange Binaries
-        run: |
-          mkdir artifacts
-          cp **/**/*.px4 artifacts/
+        with:
+          path: artifacts/
+          merge-multiple: true
 
       - name: Upload Binaries to Release
         uses: softprops/action-gh-release@v2
         with:
-          name: ${{ needs.group_targets.outputs.tagname }}
-          tag_name: ${{ needs.group_targets.outputs.tagname }}
           draft: true
           files: artifacts/*.px4

.github/workflows/clang-tidy.yml

@@ -17,5 +17,7 @@ jobs:
       with:
         token: ${{secrets.ACCESS_TOKEN}}
 
-    - name: make clang-tidy-quiet
-      run: make clang-tidy-quiet
+    - uses: corrupt952/actions-retry-command@v1.0.7
+      with:
+        command: make clang-tidy-quiet
+        max_attempts: 3

.github/workflows/compile_ubuntu.yml

@@ -0,0 +1,46 @@
+name: Ubuntu environment build
+
+on:
+  push:
+    branches:
+      - 'main'
+      - 'stable'
+      - 'beta'
+      - 'release/**'
+  pull_request:
+    branches:
+      - '*'
+
+jobs:
+  build_and_test:
+    name: Build and Test
+    strategy:
+      fail-fast: false
+      matrix:
+        version: ['ubuntu:22.04', 'ubuntu:24.04']
+    runs-on: [runs-on,runner=8cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
+    container:
+      image: ${{ matrix.version }}
+      volumes:
+        - /github/workspace:/github/workspace
+    steps:
+
+      - name: Fix git in container
+        run: |
+          # we only need this because we are running the job in a container
+          # when checkout pulls git it does it in a shared volume
+          # and file ownership changes between steps
+          # first we install git since its missing from the base image
+          # then we mark the directory as safe for other instances
+          # of git to use.
+          apt update && apt install git -y
+          git config --global --add safe.directory $(realpath .)
+
+      - uses: actions/checkout@v4
+
+      - name: Install Deps, Build, and Make Quick Check
+        run: |
+          # we need to install dependencies and build on the same step
+          # given the stateless nature of docker images
+          ./Tools/setup/ubuntu.sh
+          make quick_check

.github/workflows/dev_container.yml

@@ -0,0 +1,107 @@
+
+name: Container build
+
+on:
+  push:
+    branches:
+      - 'main'
+      - 'stable'
+      - 'beta'
+      - 'release/**'
+    tags:
+      - 'v*'
+  pull_request:
+    branches:
+      - '*'
+
+jobs:
+  build:
+    name: Build and Push Container
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-tags: true
+          submodules: false
+          fetch-depth: 0
+
+      - name: Set PX4 Tag
+        id: px4-tag
+        run: |
+          echo "tag=$(git describe --tags --match 'v[0-9]*')" >> $GITHUB_OUTPUT
+
+      - name: Login to Docker Hub
+        uses: docker/login-action@v3
+        if: github.event_name != 'pull_request'
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v3
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta
+        uses: docker/metadata-action@v5
+        with:
+          images: |
+            ghcr.io/PX4/px4-dev
+            ${{ (github.event_name != 'pull_request') && 'px4io/px4-dev' || '' }}
+          tags: |
+            type=semver,pattern={{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=ref,event=branch,value=${{ steps.px4-tag.outputs.tag }},priority=700
+            type=ref,event=branch,suffix=-{{date 'YYYY-MM-DD'}},priority=600
+            type=ref,event=branch,suffix=,priority=500
+            type=ref,event=pr
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+
+      - name: Build and load container image
+        uses: docker/build-push-action@v6
+        id: docker
+        with:
+          context: Tools/setup
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+          platforms: |
+            linux/amd64
+          load: true
+          push: false
+          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
+          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max
+
+      - name: Get Tag Name
+        id: tag_name
+        run: |
+          echo "::set-output name=tag_name::$(echo '${{ fromJSON(steps.docker.outputs.metadata)['image.name'] }}' | sed 's/,.*$//')"
+
+      - name: make quick_check
+        uses: addnab/docker-run-action@v3
+        with:
+          image: ${{ steps.tag_name.outputs.tag_name }}
+          options: -v ${{ github.workspace }}:/workspace
+          run: |
+            cd /workspace
+            git config --global --add safe.directory /workspace
+            make px4_sitl_default
+            make px4_fmu-v6x_default
+
+      - name: Push container image
+        uses: docker/build-push-action@v6
+        with:
+          context: Tools/setup
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+          platforms: |
+            linux/amd64
+          provenance: mode=max
+          push: true
+          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
+          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max

.github/workflows/flash_analysis.yml

@@ -0,0 +1,118 @@
+name: FLASH usage analysis
+
+on:
+  push:
+    branches:
+      - 'main'
+  pull_request:
+    branches:
+      - '*'
+
+jobs:
+  analyze_flash:
+    name: Analyzing ${{ matrix.target }}
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    container:
+      image: px4io/px4-dev-nuttx-focal
+    strategy:
+      matrix:
+        target: [px4_fmu-v5x, px4_fmu-v6x]
+    outputs:
+      px4_fmu-v5x: ${{ steps.gen-output.outputs.output_px4_fmu-v5x }}
+      px4_fmu-v6x: ${{ steps.gen-output.outputs.output_px4_fmu-v6x }}
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+          submodules: recursive
+
+      - name: Git ownership workaround
+        run: git config --system --add safe.directory '*'
+
+      - name: Build Target
+        run: make ${{ matrix.target }}
+
+      - name: Store the ELF with the change
+        run: cp ./build/${{ matrix.target }}_default/${{ matrix.target }}_default.elf ./with-change.elf
+
+      - name: Clean previous build
+        run: |
+          make clean
+          make distclean
+
+      - name: If it's a PR checkout the base commit
+        if: ${{ github.event.pull_request }}
+        run: git checkout ${{ github.event.pull_request.base.sha }}
+
+      - name: If it's a push checkout the previous commit
+        if: github.event_name == 'push'
+        run: git checkout ${{ github.event.before }}
+
+      - name: Update submodules
+        run: make submodulesupdate
+
+      - name: Build
+        run: make ${{ matrix.target }}
+
+      - name: Store the ELF before the change
+        run: cp ./build/${{ matrix.target }}_default/${{ matrix.target }}_default.elf ./before-change.elf
+
+      - name: bloaty-action
+        uses: carlosperate/bloaty-action@v1.1.0
+        id: bloaty-step
+        with:
+          bloaty-args: -d sections,compileunits -n 0 ./with-change.elf -- ./before-change.elf
+          output-to-summary: true
+
+      - name: Generate output
+        id: gen-output
+        run: |
+          EOF=$(dd if=/dev/urandom bs=15 count=1 status=none | base64)
+          echo "output_${{ matrix.target }}<<$EOF" >> $GITHUB_OUTPUT
+          echo "${{ steps.bloaty-step.outputs.bloaty-output-encoded }}" >> $GITHUB_OUTPUT
+          echo "$EOF" >> $GITHUB_OUTPUT
+
+  post_pr_comment:
+    name: Publish Results
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    needs: [analyze_flash]
+    if: ${{ github.event.pull_request }}
+    steps:
+      - name: Find Comment
+        uses: peter-evans/find-comment@v3
+        id: fc
+        with:
+          issue-number: ${{ github.event.pull_request.number }}
+          comment-author: 'github-actions[bot]'
+          body-includes: FLASH Analysis
+
+      - name: Set Build Time
+        id: bt
+        run: |
+          echo "timestamp=$(date +'%Y-%m-%dT%H:%M:%S')" >> $GITHUB_OUTPUT
+
+      - name: Create or update comment
+        uses: peter-evans/create-or-update-comment@v4
+        with:
+          comment-id: ${{ steps.fc.outputs.comment-id }}
+          issue-number: ${{ github.event.pull_request.number }}
+          body: |
+            ## FLASH Analysis
+            <details>
+              <summary>px4_fmu-v5x</summary>
+
+              ```
+              ${{ needs.analyze_flash.outputs.px4_fmu-v5x }}
+              ```
+            </details>
+
+            <details>
+              <summary>px4_fmu-v6x</summary>
+
+              ```
+              ${{ needs.analyze_flash.outputs.px4_fmu-v6x }}
+              ```
+            </details>
+
+            **Updated: _${{ steps.bt.outputs.timestamp }}_**
+          edit-mode: replace

.github/workflows/sitl_tests.yml

@@ -16,7 +16,7 @@ on:
 jobs:
   build:
     name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     container:
       image: px4io/px4-dev-simulation-focal:2021-09-08
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined

.vscode/cmake-variants.yaml

@@ -306,6 +306,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: micoair_h743_default
+    micoair_h743-aio_bootloader:
+      short: micoair_h743-aio_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-aio_bootloader
+    micoair_h743-aio_default:
+      short: micoair_h743-aio
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-aio_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel
@@ -356,6 +366,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: nxp_mr-canhubk3_fmu
+    nxp_tropic-community_default:
+      short: nxp_tropic-community_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: nxp_tropic-community_default
     raspberrypi_pico_default:
       short: raspberrypi_pico
       buildType: MinSizeRel

CMakeLists.txt

@@ -408,8 +408,15 @@ include(px4_add_gtest)
 if(BUILD_TESTING)
 	include(gtest)
 
+	# Ensure there's no -R without any filter expression since that trips newer ctest versions
+	if(TESTFILTER)
+		set(TESTFILTERARG "-R")
+	else()
+		set(TESTFILTERARG "")
+	endif()
+
 	add_custom_target(test_results
-			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test -R ${TESTFILTER} USES_TERMINAL
+			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test ${TESTFILTERARG} ${TESTFILTER}
 			DEPENDS
 				px4
 				examples__dyn_hello

Makefile

@@ -343,6 +343,7 @@ bootloaders_update: \
 	matek_h743-mini_bootloader \
 	matek_h743-slim_bootloader \
         micoair_h743_bootloader \
+        micoair_h743-aio_bootloader \
 	modalai_fc-v2_bootloader \
 	mro_ctrl-zero-classic_bootloader \
 	mro_ctrl-zero-h7_bootloader \

README.md

@@ -2,7 +2,7 @@
 
 [![Releases](https://img.shields.io/github/release/PX4/PX4-Autopilot.svg)](https://github.com/PX4/PX4-Autopilot/releases) [![DOI](https://zenodo.org/badge/22634/PX4/PX4-Autopilot.svg)](https://zenodo.org/badge/latestdoi/22634/PX4/PX4-Autopilot)
 
-[![Nuttx Targets](https://github.com/PX4/PX4-Autopilot/workflows/Nuttx%20Targets/badge.svg)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
+[![Build Targets](https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml/badge.svg?branch=main)](https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
 
 [![Discord Shield](https://discordapp.com/api/guilds/1022170275984457759/widget.png?style=shield)](https://discord.gg/dronecode)
 
@@ -104,7 +104,7 @@ These boards fully comply with Pixhawk Standard, and are maintained by the PX4-A
 
 These boards are maintained to be compatible with PX4-Autopilot by the Manufacturers.
 
-* [ARK Electronics ARKV6X](https://docs.px4.io/main/en/flight_controller/arkv6x.html)
+* [ARK Electronics ARKV6X](https://docs.px4.io/main/en/flight_controller/ark_v6x.html)
 * [CubePilot Cube Orange+](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orangeplus.html)
 * [CubePilot Cube Orange](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orange.html)
 * [CubePilot Cube Yellow](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_yellow.html)

ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx

@@ -38,4 +38,6 @@ param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 
+param set-default EKF2_GPS_DELAY 0
+
 param set SIH_VEHICLE_TYPE 0

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -45,7 +45,9 @@ param set-default CA_SV_CS1_TRQ_P 1
 param set-default CA_SV_CS1_TYPE 3
 param set-default CA_SV_CS2_TRQ_Y 1
 param set-default CA_SV_CS2_TYPE 4
-param set-default PWM_MAIN_FUNC3 201
-param set-default PWM_MAIN_FUNC4 202
-param set-default PWM_MAIN_FUNC5 203
-param set-default PWM_MAIN_FUNC6 101
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 202
+param set-default PWM_MAIN_FUNC3 203
+param set-default PWM_MAIN_FUNC4 101
+
+param set-default EKF2_GPS_DELAY 0

ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert

@@ -11,6 +11,7 @@
 PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
 
+param set-default EKF2_GPS_DELAY 0
 param set-default EKF2_FUSE_BETA 0 # side slip fusion is currently not supported for tailsitters
 
 param set-default SENS_EN_GPSSIM 1

ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna

@@ -24,33 +24,33 @@ param set-default FW_LND_ANG 8
 param set-default NPFG_PERIOD 12
 
 param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
+param set-default FW_PR_FF 0.2
 param set-default FW_PR_I 0.5
 param set-default TRIM_PITCH -0.15
 
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
 param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
+param set-default FW_RR_P 0.4
+param set-default FW_RR_I 0.7
 
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
+param set-default FW_R_RMAX 56.15
+
+param set-default FW_YR_FF 0.3
+param set-default FW_YR_P 1.3
+param set-default FW_YR_I 0.7
+
+param set-default FW_PSP_OFF 0
+param set-default FW_P_LIM_MIN -15
 
 param set-default FW_SPOILERS_LND 0.4
 
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_CLMB_MAX 5
+param set-default FW_T_SINK_MAX 3.5
+param set-default FW_T_SINK_MIN 3
 
 param set-default FW_W_EN 1
 
+param set-default FD_ESCS_EN 0
+
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15

ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision

@@ -75,7 +75,6 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
-param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -13,22 +13,22 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 
 # Rover parameters
 param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAN_YAW_SCALE 0.1
-param set-default RD_MAX_ACCEL 6
+param set-default RD_MAX_ACCEL 5
+param set-default RD_MAX_DECEL 10
 param set-default RD_MAX_JERK 30
-param set-default RD_MAX_THR_YAW_R 5
-param set-default RD_YAW_RATE_P 0.1
-param set-default RD_YAW_RATE_I 0
+param set-default RD_MAX_THR_YAW_R 1.5
+param set-default RD_YAW_RATE_P 0.25
+param set-default RD_YAW_RATE_I 0.01
 param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0
-param set-default RD_MAX_SPEED 5
-param set-default RD_MAX_THR_SPD 7
-param set-default RD_SPEED_P 1
-param set-default RD_SPEED_I 0
+param set-default RD_YAW_I 0.1
+param set-default RD_MAX_SPEED 2
+param set-default RD_MAX_THR_SPD 2.15
+param set-default RD_SPEED_P 0.1
+param set-default RD_SPEED_I 0.01
 param set-default RD_MAX_YAW_RATE 180
-param set-default RD_MISS_SPD_DEF 5
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
+param set-default RD_MAX_YAW_ACCEL 1000
 
 # Pure pursuit parameters
 param set-default PP_LOOKAHD_MAX 30
@@ -43,13 +43,13 @@ param set-default SENS_EN_ARSPDSIM 0
 
 # Actuator mapping
 param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
+param set-default SIM_GZ_WH_MIN1 70
+param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100
 
 param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-param set-default SIM_GZ_WH_MIN2 0
-param set-default SIM_GZ_WH_MAX2 200
+param set-default SIM_GZ_WH_MIN2 70
+param set-default SIM_GZ_WH_MAX2 130
 param set-default SIM_GZ_WH_DIS2 100
 
 param set-default SIM_GZ_WH_REV 1 # reverse right wheel

ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower

@@ -21,7 +21,6 @@ param set-default COM_ARM_WO_GPS 1
 
 # Rover parameters
 param set-default RD_WHEEL_TRACK 0.9
-param set-default RD_MAN_YAW_SCALE 0.1
 param set-default RD_YAW_RATE_I 0.1
 param set-default RD_YAW_RATE_P 5
 param set-default RD_MAX_ACCEL 1
@@ -30,7 +29,6 @@ param set-default RD_MAX_SPEED 8
 param set-default RD_YAW_P 5
 param set-default RD_YAW_I 0.1
 param set-default RD_MAX_YAW_RATE 30
-param set-default RD_MISS_SPD_DEF 8
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
 

ROMFS/px4fmu_common/init.d-posix/airframes/4012_gz_rover_ackermann

@@ -15,16 +15,18 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 param set-default NAV_ACC_RAD 0.5
 param set-default RA_ACC_RAD_GAIN 2
 param set-default RA_ACC_RAD_MAX 3
-param set-default RA_MAX_ACCEL 1.5
+param set-default RA_LAT_ACCEL_I 0.01
+param set-default RA_LAT_ACCEL_P 0.1
+param set-default RA_MAX_ACCEL 3
+param set-default RA_MAX_DECEL 6
 param set-default RA_MAX_JERK 15
+param set-default RA_MAX_LAT_ACCEL 4
 param set-default RA_MAX_SPEED 3
 param set-default RA_MAX_STR_ANG 0.5236
 param set-default RA_MAX_STR_RATE 360
-param set-default RA_MISS_VEL_DEF 3
-param set-default RA_MISS_VEL_GAIN 5
-param set-default RA_MISS_VEL_MIN 1
+param set-default RA_MAX_THR_SPEED 3.1
 param set-default RA_SPEED_I 0.01
-param set-default RA_SPEED_P 2
+param set-default RA_SPEED_P 0.1
 param set-default RA_WHEEL_BASE 0.321
 
 # Pure Pursuit parameters

ROMFS/px4fmu_common/init.d-posix/airframes/4013_gz_x500_lidar_2d

@@ -1,10 +1,10 @@
 #!/bin/sh
 #
-# @name Gazebo x500 lidar
+# @name Gazebo x500 lidar 2d
 #
 # @type Quadrotor
 #
 
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_2d}
 
 . ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4015_gz_r1_rover_mecanum

@@ -13,18 +13,18 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 
 # Rover parameters
 param set-default RM_WHEEL_TRACK 0.3
-param set-default RM_MAN_YAW_SCALE 0.1
-param set-default RM_YAW_RATE_I 0
-param set-default RM_YAW_RATE_P 0.01
+param set-default RM_YAW_RATE_I 0.1
+param set-default RM_YAW_RATE_P 0.1
 param set-default RM_MAX_ACCEL 3
+param set-default RM_MAX_DECEL 5
 param set-default RM_MAX_JERK 5
-param set-default RM_MAX_SPEED 4
-param set-default RM_MAX_THR_SPD 7
-param set-default RM_MAX_THR_YAW_R 7.5
+param set-default RM_MAX_SPEED 2
+param set-default RM_MAX_THR_SPD 2.2
+param set-default RM_MAX_THR_YAW_R 1.2
 param set-default RM_YAW_P 5
 param set-default RM_YAW_I 0.1
-param set-default RM_MAX_YAW_RATE 180
-param set-default RM_MISS_SPD_DEF 3
+param set-default RM_MAX_YAW_RATE 120
+param set-default RM_MAX_YAW_ACCEL 240
 param set-default RM_MISS_VEL_GAIN 1
 param set-default RM_SPEED_I 0.01
 param set-default RM_SPEED_P 0.1
@@ -42,23 +42,23 @@ param set-default SENS_EN_ARSPDSIM 0
 
 # Actuator mapping
 param set-default SIM_GZ_WH_FUNC1 102 # right wheel front
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
+param set-default SIM_GZ_WH_MIN1 70
+param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100
 
 param set-default SIM_GZ_WH_FUNC2 101 # left wheel front
-param set-default SIM_GZ_WH_MIN2 0
-param set-default SIM_GZ_WH_MAX2 200
+param set-default SIM_GZ_WH_MIN2 70
+param set-default SIM_GZ_WH_MAX2 130
 param set-default SIM_GZ_WH_DIS2 100
 
 param set-default SIM_GZ_WH_FUNC3 104 # right wheel back
-param set-default SIM_GZ_WH_MIN3 0
-param set-default SIM_GZ_WH_MAX3 200
+param set-default SIM_GZ_WH_MIN3 70
+param set-default SIM_GZ_WH_MAX3 130
 param set-default SIM_GZ_WH_DIS3 100
 
 param set-default SIM_GZ_WH_FUNC4 103 # left wheel back
-param set-default SIM_GZ_WH_MIN4 0
-param set-default SIM_GZ_WH_MAX4 200
+param set-default SIM_GZ_WH_MIN4 70
+param set-default SIM_GZ_WH_MAX4 130
 param set-default SIM_GZ_WH_DIS4 100
 
 param set-default SIM_GZ_WH_REV 10

ROMFS/px4fmu_common/init.d-posix/airframes/4016_gz_x500_lidar_down

@@ -0,0 +1,10 @@
+#!/bin/sh
+#
+# @name Gazebo x500 lidar down
+#
+# @type Quadrotor
+#
+
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_down}
+
+. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4017_gz_x500_lidar_front

@@ -0,0 +1,10 @@
+#!/bin/sh
+#
+# @name Gazebo x500 lidar front
+#
+# @type Quadrotor
+#
+
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_front}
+
+. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4018_gz_quadtailsitter

@@ -0,0 +1,97 @@
+#!/bin/sh
+#
+# @name Quadrotor + Tailsitter
+#
+# @type VTOL Quad Tailsitter
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=quadtailsitter}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 0
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 0
+
+
+param set-default MAV_TYPE 20
+
+param set-default CA_AIRFRAME 4
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.23
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.23
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.23
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.23
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 0
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+
+param set-default SIM_GZ_EC_MIN1 10
+param set-default SIM_GZ_EC_MIN2 10
+param set-default SIM_GZ_EC_MIN3 10
+param set-default SIM_GZ_EC_MIN4 10
+
+param set-default SIM_GZ_EC_MAX1 1500
+param set-default SIM_GZ_EC_MAX2 1500
+param set-default SIM_GZ_EC_MAX3 1500
+param set-default SIM_GZ_EC_MAX4 1500
+
+param set-default FD_FAIL_R 70
+
+param set-default FW_P_TC 0.6
+
+param set-default FW_PR_I 0.3
+param set-default FW_PR_P 0.5
+param set-default FW_PSP_OFF 2
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_I 0.1
+param set-default FW_RR_P 0.2
+param set-default FW_YR_FF 0 # make yaw rate controller very weak, only keep default P
+param set-default FW_YR_I 0
+param set-default FW_THR_TRIM 0.35
+param set-default FW_THR_MAX 0.8
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_CLMB_MAX 6
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 3
+param set-default FW_T_SINK_MIN 1.6
+param set-default FW_AIRSPD_STALL 10
+param set-default FW_AIRSPD_MIN 14
+param set-default FW_AIRSPD_TRIM 18
+param set-default FW_AIRSPD_MAX 22
+
+param set-default MC_AIRMODE 2
+param set-default MAN_ARM_GESTURE 0 # required for yaw airmode
+param set-default MC_ROLL_P 3
+param set-default MC_PITCH_P 3
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_PITCHRATE_P 0.3
+
+param set-default VT_ARSP_TRANS 15
+param set-default VT_B_TRANS_DUR 5
+param set-default VT_FW_DIFTHR_EN 7
+param set-default VT_FW_DIFTHR_S_Y 1
+param set-default VT_F_TRANS_DUR 1.5
+param set-default VT_TYPE 0
+
+param set-default WV_EN 0
+
+param set-default EKF2_FUSE_BETA 0

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -84,9 +84,12 @@ px4_add_romfs_files(
 	4010_gz_x500_mono_cam
 	4011_gz_lawnmower
 	4012_gz_rover_ackermann
-	4013_gz_x500_lidar
+	4013_gz_x500_lidar_2d
 	4014_gz_x500_mono_cam_down
 	4015_gz_r1_rover_mecanum
+	4016_gz_x500_lidar_down
+	4017_gz_x500_lidar_front
+	4018_gz_quadtailsitter
 
 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -190,11 +190,11 @@ if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	echo "COM_DL_LOSS_T set to $COM_DL_LOSS_T_LONGER"
 	param set COM_DL_LOSS_T $COM_DL_LOSS_T_LONGER
 
-	COM_RC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
+	COM_RC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 1.0" | bc)
 	echo "COM_RC_LOSS_T set to $COM_RC_LOSS_T_LONGER"
 	param set COM_RC_LOSS_T $COM_RC_LOSS_T_LONGER
 
-	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
+	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 1.0" | bc)
 	echo "COM_OF_LOSS_T set to $COM_OF_LOSS_T_LONGER"
 	param set COM_OF_LOSS_T $COM_OF_LOSS_T_LONGER
 

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -18,22 +18,19 @@ param set UAVCAN_ENABLE 0
 param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_P 1
 param set-default CA_SV_CS1_TYPE 3
 param set-default CA_SV_CS2_TRQ_Y 1
 param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
 
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
+param set HIL_ACT_REV 1
+param set HIL_ACT_FUNC1 201
+param set HIL_ACT_FUNC2 202
+param set HIL_ACT_FUNC3 203
+param set HIL_ACT_FUNC4 101
 
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -1,131 +0,0 @@
-#!/bin/sh
-#
-# @name Vertical Technologies DeltaQuad
-#
-# @type Standard VTOL
-# @class VTOL
-#
-# @maintainer Sander Smeets <sander@droneslab.com>
-#
-# @output Motor1 motor 1
-# @output Motor2 motor 2
-# @output Motor3 motor 3
-# @output Motor4 motor 4
-# @output Servo1 Right elevon
-# @output Servo2 Left elevon
-# @output Servo3 Pusher motor
-# @output Servo4 Pusher reverse channel
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default MAV_TYPE 22
-
-param set-default BAT1_CAPACITY 23000
-param set-default BAT1_N_CELLS 4
-param set-default BAT1_R_INTERNAL 0.0025
-
-param set-default SYS_HAS_NUM_ASPD 0
-
-param set-default EKF2_GPS_POS_X -0.12
-param set-default EKF2_IMU_POS_X -0.12
-
-param set-default FW_USE_AIRSPD 0
-param set-default NPFG_PERIOD 25
-param set-default FW_PR_FF 0.7
-param set-default FW_PR_I 0.18
-param set-default FW_PR_P 0.15
-param set-default FW_P_TC 0.5
-param set-default FW_PSP_OFF 5
-param set-default FW_R_LIM 35
-param set-default FW_RR_FF 0.9
-param set-default FW_RR_I 0.08
-param set-default FW_RR_P 0.18
-param set-default FW_T_CLMB_MAX 3
-param set-default FW_T_SINK_MAX 3
-param set-default FW_T_SINK_MIN 1
-param set-default FW_THR_TRIM 0.70
-param set-default FW_THR_SLEW_MAX 1
-param set-default FW_P_LIM_MAX 15
-param set-default FW_P_LIM_MIN -25
-param set-default FW_P_RMAX_NEG 45
-param set-default FW_P_RMAX_POS 45
-param set-default FW_R_RMAX 50
-param set-default FW_THR_MIN 0.55
-param set-default FW_BAT_SCALE_EN 1
-param set-default FW_T_RLL2THR 20
-
-param set-default MC_ROLLRATE_P 0.16
-param set-default MC_ROLLRATE_I 0.01
-param set-default MC_PITCHRATE_I 0.05
-
-param set-default MC_YAWRATE_MAX 20
-param set-default MC_AIRMODE 1
-
-param set-default MIS_TAKEOFF_ALT 15
-
-param set-default MPC_XY_P 0.8
-param set-default MPC_XY_VEL_MAX 5
-param set-default MPC_LAND_SPEED 1.2
-param set-default MPC_TILTMAX_LND 35
-param set-default MPC_Z_VEL_MAX_UP 1.5
-param set-default MPC_TKO_RAMP_T 0.8
-param set-default MPC_TILTMAX_AIR 25
-param set-default MPC_TILTMAX_LND 25
-param set-default MPC_YAWRAUTO_MAX 20
-
-param set-default NAV_LOITER_RAD 100
-
-param set-default PWM_MAIN_DIS5 1500
-param set-default PWM_MAIN_DIS6 1500
-param set-default PWM_MAIN_DIS7 900
-param set-default PWM_MAIN_DIS8 900
-
-
-param set-default SENS_BOARD_ROT 18
-
-# TELEM2 config
-param set-default MAV_1_CONFIG 102
-param set-default MAV_1_RATE 5000
-param set-default MAV_1_FORWARD 1
-param set-default SER_TEL2_BAUD 57600
-
-param set-default VT_TYPE 2
-param set-default VT_PITCH_MIN 8
-param set-default VT_FW_QC_P 55
-param set-default VT_FW_QC_R 55
-param set-default VT_TRANS_MIN_TM 15
-param set-default VT_FWD_THRUST_SC 4
-param set-default VT_TRANS_TIMEOUT 22
-
-param set-default COM_RC_OVERRIDE 0
-
-param set-default CA_AIRFRAME 2
-
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -1,121 +0,0 @@
-#!/bin/sh
-#
-# @name BabyShark VTOL
-#
-# @type Standard VTOL
-# @class VTOL
-#
-# @maintainer Silvan Fuhrer <silvan@auterion.com>
-#
-# @output Motor1 motor 1
-# @output Motor2 motor 2
-# @output Motor3 motor 3
-# @output Motor4 motor 4
-# @output Motor5 Pusher motor
-# @output Servo1 Ailerons
-# @output Servo2 A-tail left
-# @output Servo3 A-tail right
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-# @board holybro_kakutef7 exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default MAV_TYPE 22
-
-param set-default BAT1_N_CELLS 6
-
-param set-default FW_AIRSPD_MAX 30
-param set-default FW_AIRSPD_MIN 19
-param set-default FW_AIRSPD_TRIM 23
-param set-default FW_PN_R_SLEW_MAX 40
-param set-default FW_PSP_OFF 3
-param set-default FW_P_LIM_MAX 18
-param set-default FW_P_LIM_MIN -25
-param set-default FW_RLL_TO_YAW_FF 0.1
-param set-default FW_RR_P 0.08
-param set-default FW_R_LIM 45
-param set-default FW_R_RMAX 50
-param set-default FW_THR_TRIM 0.65
-param set-default FW_THR_MIN 0.3
-param set-default FW_THR_SLEW_MAX 0.6
-param set-default FW_T_SINK_MAX 15
-param set-default FW_T_SINK_MIN 3
-param set-default FW_YR_P 0.15
-
-param set-default IMU_DGYRO_CUTOFF 15
-param set-default MC_PITCHRATE_MAX 60
-param set-default MC_ROLLRATE_MAX 60
-param set-default MC_YAWRATE_I 0.15
-param set-default MC_YAWRATE_MAX 40
-param set-default MC_YAWRATE_P 0.3
-
-param set-default MC_AIRMODE 1
-param set-default MPC_LAND_SPEED 1
-param set-default MPC_MAN_TILT_MAX 25
-param set-default MPC_MAN_Y_MAX 40
-param set-default MPC_THR_HOVER 0.45
-param set-default MPC_TILTMAX_AIR 25
-param set-default MPC_YAWRAUTO_MAX 40
-param set-default MPC_Z_VEL_MAX_UP 2
-
-param set-default NAV_ACC_RAD 3
-
-param set-default PWM_MAIN_DIS3 1000
-param set-default PWM_MAIN_MIN3 1120
-
-param set-default SENS_BOARD_ROT 4
-
-param set-default VT_ARSP_BLEND 10
-param set-default VT_ARSP_TRANS 21
-param set-default VT_B_DEC_MSS 1.5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_FWD_THRUST_SC 1.2
-param set-default VT_F_TR_OL_TM 8
-param set-default VT_TRANS_MIN_TM 4
-param set-default VT_TYPE 2
-
-
-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 15
-param set-default CA_SV_CS0_TRQ_R 1
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_R 0
-param set-default CA_SV_CS1_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 13
-param set-default CA_SV_CS2_TRQ_P 0.5
-param set-default CA_SV_CS2_TRQ_Y 0.5
-param set-default CA_SV_CS2_TYPE 14
-
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 202
-param set-default PWM_MAIN_FUNC3 105
-param set-default PWM_MAIN_FUNC4 203
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 102
-param set-default PWM_MAIN_FUNC7 103
-param set-default PWM_MAIN_FUNC8 104
-
-param set-default PWM_MAIN_TIM0 50
-param set-default PWM_MAIN_DIS1 1500
-param set-default PWM_MAIN_DIS2 1500
-param set-default PWM_MAIN_DIS4 1500

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -67,7 +67,6 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
-param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters

ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5

@@ -68,7 +68,6 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
-param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters

ROMFS/px4fmu_common/init.d/airframes/50001_aion_robotics_r1_rover

@@ -23,22 +23,23 @@ param set-default RBCLW_REV 1 # reverse right wheels
 
 # Rover parameters
 param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAN_YAW_SCALE 1
-param set-default RD_MAX_ACCEL 5
-param set-default RD_MAX_JERK 10
-param set-default RD_MAX_THR_YAW_R 4
-param set-default RD_YAW_RATE_P 0.1
-param set-default RD_YAW_RATE_I 0
+param set-default RD_MAX_ACCEL 3
+param set-default RD_MAX_DECEL 4
+param set-default RD_MAX_JERK 5
+param set-default RD_MAX_SPEED 1.6
+param set-default RD_MAX_THR_SPD 1.9
+param set-default RD_MAX_THR_YAW_R 0.7
+param set-default RD_MAX_YAW_ACCEL 600
+param set-default RD_MAX_YAW_RATE 250
+param set-default RD_SPEED_P 0.1
+param set-default RD_SPEED_I 0.01
+param set-default RD_TRANS_DRV_TRN 0.785398
+param set-default RD_TRANS_TRN_DRV 0.139626
 param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0
-param set-default RD_MAX_SPEED 1.8
-param set-default RD_MAX_THR_SPD 2
-param set-default RD_SPEED_P 0.5
-param set-default RD_SPEED_I 0.1
-param set-default RD_MAX_YAW_RATE 300
-param set-default RD_MISS_SPD_DEF 1.8
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
+param set-default RD_YAW_I 0.1
+param set-default RD_YAW_RATE_P 0.1
+param set-default RD_YAW_RATE_I 0.01
+
 
 # Pure pursuit parameters
 param set-default PP_LOOKAHD_MAX 10

ROMFS/px4fmu_common/init.d/airframes/51001_axial_scx10_2_trail_honcho

@@ -19,16 +19,18 @@ param set-default BAT1_N_CELLS 3
 param set-default NAV_ACC_RAD 0.5
 param set-default RA_ACC_RAD_GAIN 2
 param set-default RA_ACC_RAD_MAX 3
-param set-default RA_MAX_ACCEL 0.5
-param set-default RA_MAX_JERK 10
-param set-default RA_MAX_SPEED 2.7
+param set-default RA_LAT_ACCEL_I 0.01
+param set-default RA_LAT_ACCEL_P 0.1
+param set-default RA_MAX_ACCEL 1.5
+param set-default RA_MAX_DECEL 10
+param set-default RA_MAX_JERK 20
+param set-default RA_MAX_LAT_ACCEL 3
+param set-default RA_MAX_SPEED 2.5
 param set-default RA_MAX_STR_ANG 0.5236
 param set-default RA_MAX_STR_RATE 270
-param set-default RA_MISS_VEL_DEF 2.7
-param set-default RA_MISS_VEL_GAIN 3.5
-param set-default RA_MISS_VEL_MIN 1
-param set-default RA_SPEED_I 0.1
-param set-default RA_SPEED_P 0.5
+param set-default RA_MAX_THR_SPEED 2.8
+param set-default RA_SPEED_I 0.01
+param set-default RA_SPEED_P 0.1
 param set-default RA_WHEEL_BASE 0.321
 
 # Pure pursuit parameters

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -129,8 +129,6 @@ if(CONFIG_MODULES_VTOL_ATT_CONTROL)
 		# [13000, 13999] VTOL
 		13000_generic_vtol_standard
 		13100_generic_vtol_tiltrotor
-		13013_deltaquad
-		13014_vtol_babyshark
 		13030_generic_vtol_quad_tiltrotor
 		13200_generic_vtol_tailsitter
 	)

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -13,8 +13,6 @@ param set-default MAV_TYPE 1
 #
 # Default parameters for fixed wing UAVs.
 #
-param set-default COM_POS_FS_DELAY 5
-
 # there is a 2.5 factor applied on the _FS thresholds if for invalidation
 param set-default COM_POS_FS_EPH 50
 param set-default COM_VEL_FS_EVH 3

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -211,6 +211,13 @@ then
 	spl06 -X -a 0x77 start
 fi
 
+# SPA06 sensor external I2C
+if param compare -s SENS_EN_SPA06 1
+then
+	spa06 -X start
+	spa06 -X -a 0x77 start
+fi
+
 # PCF8583 counter (RPM sensor)
 if param compare -s SENS_EN_PCF8583 1
 then

Tools/astyle/check_code_style_all.sh

@@ -43,7 +43,7 @@ fi
 
 # install git pre-commit hook
 HOOK_FILE="$DIR/../../.git/hooks/pre-commit"
-if [ ! -f $HOOK_FILE ] && [ "$CI" != "true" ]; then
+if [ ! -f $HOOK_FILE ] && [ "$CI" != "true" ] && [ $- == *i* ]; then
 	echo ""
 	echo -e "\033[31mNinja tip: add a git pre-commit hook to automatically check code style\033[0m"
 	echo -e "Would you like to install one now? (\033[94mcp ./Tools/astyle/pre-commit .git/hooks/pre-commit\033[0m): [y/\033[1mN\033[0m]"

Tools/astyle/files_to_check_code_style.sh

@@ -32,4 +32,5 @@ exec find boards msg src platforms test \
     -path src/lib/cdrstream/rosidl -prune -o \
     -path src/modules/zenoh/zenoh-pico -prune -o \
     -path boards/modalai/voxl2/libfc-sensor-api -prune -o \
+    -path src/drivers/actuators/vertiq_io/iq-module-communication-cpp -prune -o \
     \( -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) -print \) | grep $PATTERN

Tools/ci/generate_board_targets_json.py

@@ -25,10 +25,16 @@ parser.add_argument('-p', '--pretty', dest='pretty', action='store_true',
                     help='Pretty output instead of a single line')
 parser.add_argument('-g', '--groups', dest='group', action='store_true',
                     help='Groups targets')
+parser.add_argument('-f', '--filter', dest='filter', help='comma separated list of board names to use instead of all')
 
 args = parser.parse_args()
 verbose = args.verbose
 
+board_filter = []
+if args.filter:
+    for board in args.filter.split(','):
+        board_filter.append(board)
+
 build_configs = []
 grouped_targets = {}
 excluded_boards = ['modalai_voxl2', 'px4_ros2']  # TODO: fix and enable
@@ -141,6 +147,10 @@ for manufacturer in os.scandir(os.path.join(source_dir, '../boards')):
                 label = files.name[:-9]
                 target_name = manufacturer.name + '_' + board.name + '_' + label
 
+                if board_filter and not board_name in board_filter:
+                    if verbose: print(f'excluding board {board_name} ({target_name})')
+                    continue
+
                 if board_name in excluded_boards:
                     if verbose: print(f'excluding board {board_name} ({target_name})')
                     continue
@@ -189,8 +199,6 @@ if (args.group):
     #   nuttx-0
     #   nuttx-1
     final_groups = []
-    temp_group = []
-    group_number = {}
     last_man = ''
     last_arch = ''
     SPLIT_LIMIT = 10
@@ -199,88 +207,80 @@ if (args.group):
         print(f'=:Architectures: [{grouped_targets.keys()}]')
     for arch in grouped_targets:
         if(verbose):
-            print(f'=:Processing: [{arch}] Last: [{last_arch}]')
-
-        if(last_arch == ''):
-            last_arch = arch
-        if(arch not in group_number):
-                group_number[arch] = 0
-
-        if(last_arch != arch and len(temp_group) > 0):
-
-            group_name = last_arch + "-" + str(group_number[last_arch])
-            group_number[last_arch] += 1
-            targets = comma_targets(temp_group)
-            if(verbose):
-                print(f'=:Orphan: [{arch}][{last_arch}][{targets}]')
-            final_groups.append({
-                "container": grouped_targets[last_arch]['container'],
-                "targets": targets,
-                "arch": last_arch,
-                "group": group_name,
-                "len": len(temp_group)
-            })
-            last_arch = arch
-            temp_group = []
-
+            print(f'=:Processing: [{arch}]')
+        temp_group = []
         for man in grouped_targets[arch]['manufacturers']:
             if(verbose):
                 print(f'=:Processing: [{arch}][{man}]')
-            for tar in grouped_targets[arch]['manufacturers'][man]:
-                man_len = len(grouped_targets[arch]['manufacturers'][man])
+            man_len = len(grouped_targets[arch]['manufacturers'][man])
+            if(man_len > LOWER_LIMIT and man_len < (SPLIT_LIMIT + 1)):
+                # Manufacturers can have their own group
                 if(verbose):
-                    print(f'=:Processing: [{arch}][{man}][{man_len}][{tar}]')
-                if(last_man != man):
-                    # if(verbose):
-                    #     print(f'=:Processing: [{arch}][{man}][{tar}][{man_len}]')
-                    if(man_len > LOWER_LIMIT and man_len < (SPLIT_LIMIT + 1)):
-                        # Manufacturers can have their own group
-                        if(verbose):
-                            print(f'=:Processing: ==Manufacturers can have their own group')
-                            print(f'=:Processing: Limits[{LOWER_LIMIT}][{SPLIT_LIMIT}]')
-                        group_name = arch + "-" + man
-                        targets = comma_targets(grouped_targets[arch]['manufacturers'][man])
-                        last_man = man
-                        final_groups.append({
-                            "container": grouped_targets[arch]['container'],
-                            "targets": targets,
-                            "arch": arch,
-                            "group": group_name,
-                            "len": len(grouped_targets[arch]['manufacturers'][man])
-                        })
-                    elif(man_len >= (SPLIT_LIMIT + 1)):
-                        # Split big man groups into subgroups
-                        # example: Pixhawk
-                        chunk_limit = SPLIT_LIMIT
-                        chunk_counter = 0
-                        for chunk in chunks(grouped_targets[arch]['manufacturers'][man], chunk_limit):
-                            group_name = arch + "-" + man + "-" + str(chunk_counter)
-                            targets = comma_targets(chunk)
-                            last_man = man
-                            final_groups.append({
-                                "container": grouped_targets[arch]['container'],
-                                "targets": targets,
-                                "arch": arch,
-                                "group": group_name,
-                                "len": len(chunk),
-                            })
-                            chunk_counter += 1
-                    else:
-                        temp_group.append(tar)
-
-            if(len(temp_group) > (LOWER_LIMIT - 1)):
-                group_name = arch + "-" + str(group_number[arch])
-                last_arch = arch
-                group_number[arch] += 1
-                targets = comma_targets(temp_group)
+                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers can have their own group')
+                group_name = arch + "-" + man
+                targets = comma_targets(grouped_targets[arch]['manufacturers'][man])
                 final_groups.append({
                     "container": grouped_targets[arch]['container'],
                     "targets": targets,
                     "arch": arch,
                     "group": group_name,
-                    "len": len(temp_group)
+                    "len": len(grouped_targets[arch]['manufacturers'][man])
                 })
-                temp_group = []
+            elif(man_len >= (SPLIT_LIMIT + 1)):
+                # Split big man groups into subgroups
+                # example: Pixhawk
+                if(verbose):
+                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers has multiple own groups')
+                chunk_limit = SPLIT_LIMIT
+                chunk_counter = 0
+                for chunk in chunks(grouped_targets[arch]['manufacturers'][man], chunk_limit):
+                    group_name = arch + "-" + man + "-" + str(chunk_counter)
+                    targets = comma_targets(chunk)
+                    final_groups.append({
+                        "container": grouped_targets[arch]['container'],
+                        "targets": targets,
+                        "arch": arch,
+                        "group": group_name,
+                        "len": len(chunk),
+                    })
+                    chunk_counter += 1
+            else:
+                if(verbose):
+                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers too small group with others')
+                temp_group.extend(grouped_targets[arch]['manufacturers'][man])
+
+        temp_len = len(temp_group)
+        chunk_counter = 0
+        if(temp_len > 0 and temp_len < (SPLIT_LIMIT + 1)):
+            if(verbose):
+                print(f'=:Processing: [{arch}][orphan][{temp_len}]==Leftover arch can have their own group')
+            group_name = arch + "-" + str(chunk_counter)
+            targets = comma_targets(temp_group)
+            final_groups.append({
+                "container": grouped_targets[arch]['container'],
+                "targets": targets,
+                "arch": arch,
+                "group": group_name,
+                "len": temp_len
+            })
+        elif(temp_len >= (SPLIT_LIMIT + 1)):
+            # Split big man groups into subgroups
+            # example: Pixhawk
+            if(verbose):
+                print(f'=:Processing: [{arch}][orphan][{temp_len}]==Leftover arch can has multpile group')
+            chunk_limit = SPLIT_LIMIT
+            chunk_counter = 0
+            for chunk in chunks(temp_group, chunk_limit):
+                group_name = arch + "-" + str(chunk_counter)
+                targets = comma_targets(chunk)
+                final_groups.append({
+                    "container": grouped_targets[arch]['container'],
+                    "targets": targets,
+                    "arch": arch,
+                    "group": group_name,
+                    "len": len(chunk),
+                })
+                chunk_counter += 1
     if(verbose):
         import pprint
         print("================")

Tools/px4airframes/markdownout.py

@@ -137,7 +137,7 @@ div.frame_variant td, div.frame_variant th {
                             #print(output_name,value, attribstrs[0].strip(),attribstrs[1].strip())
                     outputs += '</ul>'
                     if has_outputs:
-                        outputs_entry = '<p><b>Specific Outputs:</b>' + outputs + '</p>'
+                        outputs_entry = '<br><b>Specific Outputs:</b>' + outputs
                     else:
                         outputs_entry = ''
 

Tools/setup/Dockerfile

@@ -0,0 +1,31 @@
+# PX4 base development environment
+FROM ubuntu:24.04
+LABEL maintainer="Daniel Agar <daniel@agar.ca>, Ramon Roche <mrpollo@gmail.com>"
+
+ENV DEBIAN_FRONTEND=noninteractive
+ENV LANG=C.UTF-8
+ENV LC_ALL=C.UTF-8
+ENV DISPLAY=:99
+ENV TERM=xterm
+ENV TZ=UTC
+
+# SITL UDP PORTS
+EXPOSE 14556/udp
+EXPOSE 14557/udp
+
+COPY docker-entrypoint.sh /usr/local/bin/docker-entrypoint.sh
+
+# Install PX4 Requirements
+COPY requirements.txt /tmp/requirements.txt
+COPY ubuntu.sh /tmp/ubuntu.sh
+RUN touch /.dockerenv
+RUN bash /tmp/ubuntu.sh --no-sim-tools
+
+RUN git config --global --add safe.directory '*'
+
+# create user with id 1001 (jenkins docker workflow default)
+RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
+
+ENTRYPOINT ["/usr/local/bin/docker-entrypoint.sh"]
+
+CMD ["/bin/bash"]

Tools/setup/docker-entrypoint.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+echo "[docker-entrypoint.sh] Starting entrypoint"
+# Start virtual X server in the background
+# - DISPLAY default is :99, set in dockerfile
+# - Users can override with `-e DISPLAY=` in `docker run` command to avoid
+#   running Xvfb and attach their screen
+if [[ -x "$(command -v Xvfb)" && "$DISPLAY" == ":99" ]]; then
+	echo "[docker-entrypoint.sh] Starting Xvfb"
+	Xvfb :99 -screen 0 1600x1200x24+32 &
+fi
+
+# Check if the ROS_DISTRO is passed and use it
+# to source the ROS environment
+if [ -n "${ROS_DISTRO}" ]; then
+	echo "[docker-entrypoint.sh] ROS: ${ROS_DISTRO}"
+	source "/opt/ros/$ROS_DISTRO/setup.bash"
+fi
+
+echo "[docker-entrypoint.sh] Working Directory: ${pwd}"
+
+# Use the LOCAL_USER_ID if passed in at runtime
+if [ -n "${LOCAL_USER_ID}" ]; then
+	echo "[docker-entrypoint.sh] Starting with: $LOCAL_USER_ID:user"
+	# modify existing user's id
+	usermod -u $LOCAL_USER_ID user
+
+	# run as user
+	# exec gosu user "$@"
+	exec "$@"
+else
+	exec "$@"
+fi

Tools/setup/requirements.txt

@@ -1,7 +1,7 @@
 argcomplete
 cerberus
 coverage
-empy==3.3.4
+empy>=3.3,<4
 future
 jinja2>=2.8
 jsonschema

Tools/setup/ubuntu.sh

@@ -2,7 +2,7 @@
 
 set -e
 
-## Bash script to setup PX4 development environment on Ubuntu LTS (22.04, 20.04, 18.04).
+## Bash script to setup PX4 development environment on Ubuntu LTS (24.04, 22.04).
 ## Can also be used in docker.
 ##
 ## Installs:
@@ -33,7 +33,9 @@ if [ -f /.dockerenv ]; then
 	apt-get --quiet -y update && DEBIAN_FRONTEND=noninteractive apt-get --quiet -y install \
 		ca-certificates \
 		gnupg \
-		lsb-core \
+		gosu \
+		lsb-release \
+		software-properties-common \
 		sudo \
 		wget \
 		;
@@ -53,23 +55,7 @@ fi
 # check ubuntu version
 # otherwise warn and point to docker?
 UBUNTU_RELEASE="`lsb_release -rs`"
-
-if [[ "${UBUNTU_RELEASE}" == "14.04" ]]; then
-	echo "Ubuntu 14.04 is no longer supported"
-	exit 1
-elif [[ "${UBUNTU_RELEASE}" == "16.04" ]]; then
-	echo "Ubuntu 16.04 is no longer supported"
-	exit 1
-elif [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-	echo "Ubuntu 18.04"
-elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-	echo "Ubuntu 20.04"
-elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-	echo "Ubuntu 22.04"
-elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
-	echo "Linux Mint 21.3"
-fi
-
+echo "Ubuntu ${UBUNTU_RELEASE}"
 
 echo
 echo "Installing PX4 general dependencies"
@@ -78,6 +64,7 @@ sudo apt-get update -y --quiet
 sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 	astyle \
 	build-essential \
+	ccache \
 	cmake \
 	cppcheck \
 	file \
@@ -86,7 +73,7 @@ sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends i
 	gdb \
 	git \
 	lcov \
-	libfuse2 \
+	libssl-dev \
 	libxml2-dev \
 	libxml2-utils \
 	make \
@@ -105,12 +92,17 @@ sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends i
 # Python3 dependencies
 echo
 echo "Installing PX4 Python3 dependencies"
-if [ -n "$VIRTUAL_ENV" ]; then
-	# virtual environments don't allow --user option
-	python -m pip install -r ${DIR}/requirements.txt
+PYTHON_VERSION=$(python3 --version 2>&1 | awk '{print $2}')
+REQUIRED_VERSION="3.11"
+if [[ "$(printf '%s\n' "$REQUIRED_VERSION" "$PYTHON_VERSION" | sort -V | head -n1)" == "$REQUIRED_VERSION" ]]; then
+	python3 -m pip install --break-system-packages -r ${DIR}/requirements.txt
 else
-	# older versions of Ubuntu require --user option
-	python3 -m pip install --user -r ${DIR}/requirements.txt
+	if [ -n "$VIRTUAL_ENV" ]; then
+		# virtual environments don't allow --user option
+		python -m pip install -r ${DIR}/requirements.txt
+	else
+		python3 -m pip install --user -r ${DIR}/requirements.txt
+	fi
 fi
 
 # NuttX toolchain (arm-none-eabi-gcc)
@@ -126,21 +118,26 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		build-essential \
 		flex \
 		g++-multilib \
+		gcc-arm-none-eabi \
 		gcc-multilib \
 		gdb-multiarch \
 		genromfs \
 		gettext \
 		gperf \
+		kconfig-frontends \
 		libelf-dev \
 		libexpat-dev \
 		libgmp-dev \
 		libisl-dev \
 		libmpc-dev \
 		libmpfr-dev \
-		libncurses5 \
-		libncurses5-dev \
-		libncursesw5-dev \
+		libncurses-dev \
+		libncurses6 \
+		libncursesw6 \
+		libnewlib-arm-none-eabi \
+		libstdc++-arm-none-eabi-newlib \
 		libtool \
+		libunwind-dev \
 		pkg-config \
 		screen \
 		texinfo \
@@ -148,46 +145,11 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		util-linux \
 		vim-common \
 		;
-	if [[ "${UBUNTU_RELEASE}" == "20.04" || "${UBUNTU_RELEASE}" == "22.04" || "${UBUNTU_RELEASE}" == "21.3" ]]; then
-		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		kconfig-frontends \
-		;
-	fi
-
 
 	if [ -n "$USER" ]; then
 		# add user to dialout group (serial port access)
 		sudo usermod -aG dialout $USER
 	fi
-
-	# arm-none-eabi-gcc
-	NUTTX_GCC_VERSION="9-2020-q2-update"
-	NUTTX_GCC_VERSION_SHORT="9-2020q2"
-
-	source $HOME/.profile # load changed path for the case the script is reran before relogin
-	if [ $(which arm-none-eabi-gcc) ]; then
-		GCC_VER_STR=$(arm-none-eabi-gcc --version)
-		GCC_FOUND_VER=$(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}" || true)
-	fi
-
-	if [[ "$GCC_FOUND_VER" == "1" ]]; then
-		echo "arm-none-eabi-gcc-${NUTTX_GCC_VERSION} found, skipping installation"
-
-	else
-		echo "Installing arm-none-eabi-gcc-${NUTTX_GCC_VERSION}";
-		wget -O /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-${INSTALL_ARCH}-linux.tar.bz2 && \
-			sudo tar -jxf /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 -C /opt/;
-
-		# add arm-none-eabi-gcc to user's PATH
-		exportline="export PATH=/opt/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}/bin:\$PATH"
-
-		if grep -Fxq "$exportline" $HOME/.profile; then
-			echo "${NUTTX_GCC_VERSION} path already set.";
-		else
-			echo $exportline >> $HOME/.profile;
-			source $HOME/.profile; # Allows to directly build NuttX targets in the same terminal
-		fi
-	fi
 fi
 
 # Simulation tools
@@ -201,51 +163,8 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		bc \
 		;
 
-	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-		java_version=11
-	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-		java_version=13
-	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		java_version=11
-	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
-		java_version=11
-	else
-		java_version=14
-	fi
-	# Java (jmavsim)
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		ant \
-		openjdk-$java_version-jre \
-		openjdk-$java_version-jdk \
-		libvecmath-java \
-		;
-
-	# Set Java 11 as default
-	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
-
 	# Gazebo / Gazebo classic installation
-	if [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		echo "Gazebo (Harmonic) will be installed"
-		echo "Earlier versions will be removed"
-		# Add Gazebo binary repository
-		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
-		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
-		sudo apt-get update -y --quiet
-
-		# Install Gazebo
-		gazebo_packages="gz-harmonic"
-	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
-		echo "Gazebo (Garden) will be installed"
-		echo "Earlier versions will be removed"
-		# Add Gazebo binary repository
-		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
-		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable jammy main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
-
-		sudo apt-get update -y --quiet
-
-		# Install Gazebo
-		gazebo_packages="gz-garden"
-	else
+	if [[ "${UBUNTU_RELEASE}" == "18.04" || "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 		wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 		# Update list, since new gazebo-stable.list has been added
@@ -260,6 +179,32 @@ if [[ $INSTALL_SIM == "true" ]]; then
 			gazebo_classic_version=11
 			gazebo_packages="gazebo$gazebo_classic_version libgazebo$gazebo_classic_version-dev"
 		fi
+	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+		echo "Gazebo (Garden) will be installed"
+		echo "Earlier versions will be removed"
+		# Add Gazebo binary repository
+		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
+		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable jammy main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
+
+		sudo apt-get update -y --quiet
+
+		# Install Gazebo
+		gazebo_packages="gz-garden"
+	else
+		# Expects Ubuntu 22.04 > by default
+		echo "Gazebo (Harmonic) will be installed"
+		echo "Earlier versions will be removed"
+		# Add Gazebo binary repository
+		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
+		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
+		sudo apt-get update -y --quiet
+
+		# Install Gazebo
+		gazebo_packages="gz-harmonic libunwind-dev"
+
+		if [[ "${UBUNTU_RELEASE}" == "24.04" ]]; then
+			gazebo_packages="$gazebo_packages cppzmq-dev"
+		fi
 	fi
 
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -285,8 +230,3 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	fi
 
 fi
-
-if [[ $INSTALL_NUTTX == "true" ]]; then
-	echo
-	echo "Relogin or reboot computer before attempting to build NuttX targets"
-fi

Tools/simulation/gz

@@ -1 +1 @@
-Subproject commit 536305adee09b9ace391b16107e625cf7c6db7e7
+Subproject commit 019f63e2d50763862b8f8d40cce77371b3260c52

Tools/teensy_uploader.py

@@ -0,0 +1,181 @@
+#!/usr/bin/env python3
+############################################################################
+#
+#   Copyright (c) 2024 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+#
+# Serial firmware uploader for the Teensy
+
+import sys
+import argparse
+import time
+import sys
+import usb.core
+import subprocess
+
+from sys import platform as _platform
+from pymavlink import mavutil
+
+try:
+    import serial
+except ImportError as e:
+    print("Failed to import serial: " + str(e))
+    print("")
+    print("You may need to install it using:")
+    print("    pip3 install --user pyserial")
+    print("")
+    sys.exit(1)
+
+# Define time to use time.time() by default
+def _time():
+    return time.time()
+
+class uploader(object):
+
+    def __init__(self, portname):
+        self.mavlink = mavutil.mavlink_connection(portname)
+
+    def send_reboot(self):
+        try:
+            self.mavlink.wait_heartbeat()
+            self.mavlink.reboot_autopilot(True)
+        except:
+            pass
+        return True
+
+TEENSY_BL_VENDORID = 0x16c0
+TEENSY_BL_PRODUCTID = 0x0478
+
+def main():
+    # Parse commandline arguments
+    parser = argparse.ArgumentParser(description="Firmware uploader for the PX autopilot system.")
+    parser.add_argument('--port', action="store", required=True, help="Comma-separated list of serial port(s) to which the FMU may be attached")
+    parser.add_argument('--force', action='store_true', default=False, help='Override board type check, or silicon errata checks and continue loading')
+    parser.add_argument('--boot-delay', type=int, default=None, help='minimum boot delay to store in flash')
+    parser.add_argument('--vendor-id', type=lambda x: int(x,0), default=None, help='PX4 USB vendorid')
+    parser.add_argument('--product-id', type=lambda x: int(x,0), default=None, help='PX4 USB productid')
+    parser.add_argument('firmware', action="store", nargs='+', help="Firmware file(s)")
+    args = parser.parse_args()
+
+    found_bootloader = False
+
+    # find USB devices
+    dev = usb.core.find(idVendor=TEENSY_BL_VENDORID, idProduct=TEENSY_BL_PRODUCTID)
+    # loop through devices, printing vendor and product ids in decimal and hex
+    if dev is not None:
+        print("Found teensy bootloader")
+        found_bootloader = True
+    else:
+        dev = usb.core.find(idVendor=args.vendor_id, idProduct=args.product_id)
+        if dev is None:
+            print("No PX4 Device found try to press the button program push button")
+        print("Attempting to reboot into Teensy bootloader...", end="", flush=True)
+
+    try:
+        while True:
+            portlist = []
+            patterns = args.port.split(",")
+            # on unix-like platforms use glob to support wildcard ports. This allows
+            # the use of /dev/serial/by-id/usb-3D_Robotics on Linux, which prevents the upload from
+            # causing modem hangups etc
+            if "linux" in _platform or "darwin" in _platform or "cygwin" in _platform:
+                import glob
+                for pattern in patterns:
+                    portlist += glob.glob(pattern)
+            else:
+                portlist = patterns
+
+            for port in portlist:
+                try:
+                    if "linux" in _platform:
+                        # Linux, don't open Mac OS and Win ports
+                        if "COM" not in port and "tty.usb" not in port:
+                            up = uploader(port)
+                    elif "darwin" in _platform:
+                        # OS X, don't open Windows and Linux ports
+                        if "COM" not in port and "ACM" not in port:
+                            up = uploader(port)
+                    elif "cygwin" in _platform:
+                        # Cygwin, don't open native Windows COM and Linux ports
+                        if "COM" not in port and "ACM" not in port:
+                            up = uploader(port)
+                    elif "win" in _platform:
+                        # Windows, don't open POSIX ports
+                        if "/" not in port:
+                            up = uploader(port)
+                except Exception:
+                    # open failed, rate-limit our attempts
+                    time.sleep(0.05)
+
+                    # and loop to the next port
+                    continue
+
+                while True:
+                    up.send_reboot()
+
+                    # wait for the reboot, without we might run into Serial I/O Error 5
+                    time.sleep(0.25)
+
+                    # wait for the close, without we might run into Serial I/O Error 6
+                    time.sleep(0.3)
+
+                    dev = usb.core.find(idVendor=TEENSY_BL_VENDORID, idProduct=TEENSY_BL_PRODUCTID)
+                    # loop through devices, printing vendor and product ids in decimal and hex
+                    if dev is not None:
+                        print("")
+                        print("Found teensy bootloader")
+                        found_bootloader = True
+                        break
+
+                    print('.', end="", flush=True)
+
+                    if not found_bootloader:
+                        # Go to the next port
+                        continue
+
+            if(found_bootloader):
+                while True:
+                    result = subprocess.Popen("teensy_loader_cli -v --mcu=TEENSY41 " + args.firmware[0], shell=True)
+                    text = result.communicate()[0]
+                    if(result.returncode == 0):
+                        sys.exit(0)
+
+            # Delay retries to < 20 Hz to prevent spin-lock from hogging the CPU
+            time.sleep(0.05)
+
+    # CTRL+C aborts the upload/spin-lock by interrupt mechanics
+    except KeyboardInterrupt:
+        print("\n Upload aborted by user.")
+        sys.exit(0)
+
+if __name__ == '__main__':
+    main()

Tools/upload.sh

@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-EXEDIR=`pwd`
-BASEDIR=$(dirname $0)
-
-SYSTYPE=`uname -s`
-
-#
-# Serial port defaults.
-#
-# XXX The uploader should be smarter than this.
-#
-if [ $SYSTYPE = "Darwin" ]; then
-SERIAL_PORTS="/dev/tty.usbmodemPX*,/dev/tty.usbmodem*"
-fi
-
-if [ $SYSTYPE = "Linux" ]; then
-SERIAL_PORTS="/dev/serial/by-id/*_PX4_*,/dev/serial/by-id/usb-3D_Robotics*,/dev/serial/by-id/usb-The_Autopilot*,/dev/serial/by-id/usb-Bitcraze*,/dev/serial/by-id/pci-Bitcraze*,/dev/serial/by-id/usb-Gumstix*,/dev/serial/by-id/usb-UVify*,/dev/serial/by-id/usb-ArduPilot*,/dev/serial/by-id/usb-ARK*,"
-fi
-
-if [[ $SYSTYPE = *"CYGWIN"* ]]; then
-SERIAL_PORTS="/dev/ttyS*"
-fi
-
-if [ $SYSTYPE = "" ]; then
-SERIAL_PORTS="COM32,COM31,COM30,COM29,COM28,COM27,COM26,COM25,COM24,COM23,COM22,COM21,COM20,COM19,COM18,COM17,COM16,COM15,COM14,COM13,COM12,COM11,COM10,COM9,COM8,COM7,COM6,COM5,COM4,COM3,COM2,COM1,COM0"
-fi
-
-python $BASEDIR/px_uploader.py --port $SERIAL_PORTS $1

boards/ark/fpv/default.px4board

@@ -1,21 +1,21 @@
 CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m7"
 CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS6"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS5"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
+CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_DRIVERS_PWM_OUT=y
@@ -31,6 +31,10 @@ CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_ESC_BATTERY=y
 CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
+CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y

boards/ark/fpv/nuttx-config/nsh/defconfig

@@ -213,13 +213,13 @@ CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
+CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM1=y
 CONFIG_STM32H7_TIM2=y
 CONFIG_STM32H7_TIM3=y
 CONFIG_STM32H7_TIM4=y
 CONFIG_STM32H7_TIM5=y
 CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_UART4=y
 CONFIG_STM32H7_UART5=y
 CONFIG_STM32H7_UART7=y
@@ -239,8 +239,8 @@ CONFIG_UART4_RXBUFSIZE=600
 CONFIG_UART4_TXBUFSIZE=1500
 CONFIG_UART5_IFLOWCONTROL=y
 CONFIG_UART5_OFLOWCONTROL=y
-CONFIG_UART5_RXDMA=y
 CONFIG_UART5_RXBUFSIZE=600
+CONFIG_UART5_RXDMA=y
 CONFIG_UART5_TXBUFSIZE=10000
 CONFIG_UART5_TXDMA=y
 CONFIG_UART7_BAUD=57600
@@ -251,15 +251,15 @@ CONFIG_UART7_RXDMA=y
 CONFIG_UART7_TXBUFSIZE=3000
 CONFIG_UART7_TXDMA=y
 CONFIG_USART1_BAUD=57600
-CONFIG_USART1_RXDMA=y
-CONFIG_USART1_TXDMA=y
 CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_RXDMA=y
 CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART1_TXDMA=y
 CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXDMA=y
-CONFIG_USART2_TXDMA=y
 CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_RXDMA=y
 CONFIG_USART2_TXBUFSIZE=1500
+CONFIG_USART2_TXDMA=y
 CONFIG_USART3_BAUD=57600
 CONFIG_USART3_RXBUFSIZE=180
 CONFIG_USART3_RXDMA=y
@@ -267,10 +267,8 @@ CONFIG_USART3_SERIAL_CONSOLE=y
 CONFIG_USART3_TXBUFSIZE=1500
 CONFIG_USART3_TXDMA=y
 CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
 CONFIG_USART6_RXDMA=y
-CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USART6_RXBUFSIZE=600
 CONFIG_USART6_TXBUFSIZE=1500
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y

boards/ark/fpv/src/board_config.h

@@ -105,6 +105,11 @@
 #  define GPIO_nARMED_INIT GPIO_TRACED3
 #endif
 
+/* SPI */
+
+#define SPI6_nRESET_EXTERNAL1       /* PF10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN10)
+#define SPI6_RESET(on_true)          px4_arch_gpiowrite(SPI6_nRESET_EXTERNAL1, !(on_true))
+
 /* I2C busses */
 
 /* Devices on the onboard buses.
@@ -154,7 +159,7 @@
 
 /* Define Channel numbers must match above GPIO pin IN(n)*/
 #define ADC_BATTERY_VOLTAGE_CHANNEL        	/* PB0 */  ADC1_CH(9)
-#define ADC_BATTERY_CURRENT_CHANNEL        	/* PC2 */  ADC3_CH(0)
+#define ADC_BATTERY_CURRENT_CHANNEL        	/* PC2 */  ADC3_CH(12)
 #define ADC_SCALED_12V_CHANNEL	     		/* PA4 */  ADC1_CH(18)
 #define ADC_SCALED_VDD_3V3_SENSORS_CHANNEL     /* PA0 */  ADC1_CH(16)
 #define ADC_SCALED_V5_CHANNEL                   /* PB1 */  ADC1_CH(5)
@@ -327,6 +332,7 @@
 		GPIO_5V_ON_BATTERY,               \
 		GPIO_VDD_3V3_SD_CARD_EN,          \
 		GPIO_nARMED_INIT,                 \
+		SPI6_nRESET_EXTERNAL1,            \
 		GPIO_FMU_CH1,     	          \
 		GPIO_FMU_CH2,     	          \
 		GPIO_FMU_CH3,     	          \

boards/ark/fpv/src/hw_config.h

@@ -69,7 +69,7 @@
 
 //#define USE_VBUS_PULL_DOWN
 #define INTERFACE_USART                1
-#define INTERFACE_USART_CONFIG         "/dev/ttyS5,921600"
+#define INTERFACE_USART_CONFIG         "/dev/ttyS0,921600"
 #define BOOT_DELAY_ADDRESS             0x000001a0
 #define BOARD_TYPE                     59
 #define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)

boards/ark/fpv/src/init.c

@@ -112,6 +112,7 @@ __EXPORT void board_peripheral_reset(int ms)
 
 	PAYLOAD_POWER_EN(false);
 	board_control_spi_sensors_power(false, 0xffff);
+	SPI6_RESET(true);
 
 	/* wait for the peripheral rail to reach GND */
 	usleep(ms * 1000);
@@ -122,6 +123,9 @@ __EXPORT void board_peripheral_reset(int ms)
 	/* switch the peripheral rail back on */
 	board_control_spi_sensors_power(true, 0xffff);
 	PAYLOAD_POWER_EN(true);
+
+	/* Release SPI6 Reset */
+	SPI6_RESET(false);
 }
 
 /************************************************************************************
@@ -206,6 +210,8 @@ __EXPORT int board_app_initialize(uintptr_t arg)
 	/* Power on Interfaces */
 	PAYLOAD_POWER_EN(true);
 
+	SPI6_RESET(false);
+
 	/* Need hrt running before using the ADC */
 
 	px4_platform_init();

boards/ark/fpv/src/spi.cpp

@@ -40,16 +40,16 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
 		initSPIBus(SPI::Bus::SPI1, {
 			initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
 		}, {GPIO::PortI, GPIO::Pin11}),
-		initSPIBus(SPI::Bus::SPI6, {
-			initSPIDevice(DRV_DEVTYPE_UNUSED, SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11})
+		initSPIBusExternal(SPI::Bus::SPI6, {
+			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11})
 		}),
 	}),
 	initSPIFmumID(ARKFPV_1, { // Placeholder
 		initSPIBus(SPI::Bus::SPI1, {
 			initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
 		}, {GPIO::PortI, GPIO::Pin11}),
-		initSPIBus(SPI::Bus::SPI6, {
-			initSPIDevice(DRV_DEVTYPE_UNUSED, SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11})
+		initSPIBusExternal(SPI::Bus::SPI6, {
+			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11})
 		}),
 	}),
 };

boards/cubepilot/cubeorange/nuttx-config/include/board_dma_map.h

@@ -37,8 +37,9 @@
 #define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0 /* DMA1:37 */
 #define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0 /* DMA1:38 */
 
-#define DMAMAP_USART6_RX   DMAMAP_DMA12_USART6RX_1 /* DMA1:71 */
-#define DMAMAP_USART6_TX   DMAMAP_DMA12_USART6TX_1 /* DMA1:72 */
-
 #define DMAMAP_SPI4_RX    DMAMAP_DMA12_SPI4RX_0 /* DMA1:83 */
 #define DMAMAP_SPI4_TX    DMAMAP_DMA12_SPI4TX_0 /* DMA1:84 */
+
+// DMAMUX2
+#define DMAMAP_USART6_RX   DMAMAP_DMA12_USART6RX_1 /* DMA2:71 */
+#define DMAMAP_USART6_TX   DMAMAP_DMA12_USART6TX_1 /* DMA2:72 */

boards/emlid/navio2/arm64.px4board

@@ -0,0 +1 @@
+CONFIG_BOARD_TOOLCHAIN="aarch64-linux-gnu"

boards/hkust/nxt-dual/src/board_config.h

@@ -95,7 +95,7 @@
 /* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
 /* Define Channel numbers must match above GPIO pin IN(n)*/
 #define ADC_BATTERY_VOLTAGE_CHANNEL             ADC12_CH(4)
-#define ADC_BATTERY_CURRENT_CHANNEL             ADC12_CH(5)
+#define ADC_BATTERY_CURRENT_CHANNEL             ADC12_CH(8)
 
 #define ADC_CHANNELS \
 	((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \

boards/holybro/kakuteh7/default.px4board

@@ -34,7 +34,6 @@ CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
-CONFIG_EKF2_EXTERNAL_VISION=y
 # CONFIG_EKF2_AUXVEL is not set
 # CONFIG_EKF2_BARO_COMPENSATION is not set
 # CONFIG_EKF2_DRAG_FUSION is not set

boards/holybro/kakuteh7/init/rc.board_sensors

@@ -11,4 +11,7 @@ then
 	icm42688p -R 6 -s start
 fi
 
-bmp280 -X start
+if ! bmp280 -X start
+then
+	spa06 -X start
+fi

boards/holybro/kakuteh7mini/default.px4board

@@ -14,9 +14,9 @@ CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI270=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
@@ -34,7 +34,6 @@ CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
-CONFIG_EKF2_EXTERNAL_VISION=y
 # CONFIG_EKF2_AUXVEL is not set
 # CONFIG_EKF2_BARO_COMPENSATION is not set
 # CONFIG_EKF2_DRAG_FUSION is not set

boards/holybro/kakuteh7mini/init/rc.board_sensors

@@ -12,4 +12,7 @@ then
   fi
 fi
 
-bmp280 -X start
+if ! bmp280 -X start
+then
+	spa06 -X start
+fi

boards/holybro/kakuteh7mini/src/hw_config.h

@@ -69,7 +69,7 @@
 
 //#define USE_VBUS_PULL_DOWN
 #define BOOT_DELAY_ADDRESS             0x000001a0
-#define BOARD_TYPE                     1054
+#define BOARD_TYPE                     1058
 #define BOARD_FLASH_SECTORS            (14)
 #define BOARD_FLASH_SIZE               (16 * 128 * 1024)
 #define APP_RESERVATION_SIZE           (1 * 128 * 1024)

boards/holybro/kakuteh7v2/default.px4board

@@ -34,7 +34,6 @@ CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
-CONFIG_EKF2_EXTERNAL_VISION=y
 # CONFIG_EKF2_AUXVEL is not set
 # CONFIG_EKF2_BARO_COMPENSATION is not set
 # CONFIG_EKF2_DRAG_FUSION is not set

boards/holybro/kakuteh7v2/init/rc.board_sensors

@@ -9,4 +9,7 @@ then
 	icm42688p -R 0 -s start
 fi
 
-bmp280 -X start
+if ! bmp280 -X start
+then
+	spa06 -X start
+fi

boards/micoair/h743-aio/bootloader.px4board

@@ -0,0 +1,3 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""

boards/micoair/h743-aio/default.px4board

@@ -0,0 +1,85 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_SERIAL_URT6="/dev/ttyS5"
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS3"
+CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
+CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
+CONFIG_DRIVERS_IMU_BOSCH_BMI270=y
+CONFIG_COMMON_INS=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_DRIVERS_PPS_CAPTURE=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_COMMON_RC=y
+CONFIG_DRIVERS_RC_INPUT=y
+CONFIG_DRIVERS_TAP_ESC=y
+CONFIG_COMMON_TELEMETRY=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
+CONFIG_MODULES_FW_RATE_CONTROL=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_PAYLOAD_DELIVERER=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_UXRCE_DDS_CLIENT=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_DUMPFILE=y
+CONFIG_SYSTEMCMDS_FAILURE=y
+CONFIG_SYSTEMCMDS_GPIO=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
+CONFIG_SYSTEMCMDS_SERIAL_PASSTHRU=y
+CONFIG_SYSTEMCMDS_SERIAL_TEST=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/micoair/h743-aio/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 1176,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the MicoAir743AIO board",
+    "image": "",
+    "build_time": 0,
+    "summary": "MicoAir743AIO",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1835008,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/micoair/h743-aio/init/rc.board_defaults

@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+param set-default BAT1_A_PER_V 14.14
+param set-default BAT1_N_CELLS 4
+param set-default BAT1_V_CHARGED 4.2
+param set-default BAT1_V_DIV 21.12
+param set-default BAT1_V_EMPTY 3.2
+
+param set-default SYS_HAS_MAG 0
+param set-default PWM_MAIN_TIM0 -4
+param set-default RC_INPUT_PROTO -1
+
+param set-default IMU_GYRO_CUTOFF 100
+param set-default SYS_AUTOSTART 4001
+param set-default MC_PITCHRATE_K 0.4
+param set-default MC_ROLLRATE_K 0.35
+param set-default MC_YAWRATE_K 1.2
+param set-default MC_YAWRATE_MAX 360
+param set-default MAV_TYPE 2
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 4
+param set-default CBRK_SUPPLY_CHK 894281

boards/micoair/h743-aio/init/rc.board_extras

@@ -0,0 +1,7 @@
+#!/bin/sh
+#
+# board specific extras init
+#------------------------------------------------------------------------------
+
+# enable onboard OSD chip
+# atxxxx start -s

boards/micoair/h743-aio/init/rc.board_sensors

@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# board specific sensors init
+#------------------------------------------------------------------------------
+
+board_adc start
+
+# # Internal SPI bus BMI088 accel/gyro
+bmi088 -s -b 2 -A -R 6 start
+bmi088 -s -b 2 -G -R 6 start
+
+# # Internal SPI bus BMI270 accel/gyro
+bmi270 -s -b 2 -R 0 start
+
+# Internal baro
+dps310 -I start -a 118

boards/micoair/h743-aio/nuttx-config/bootloader/defconfig

@@ -0,0 +1,85 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_SPI_EXCHANGE is not set
+# CONFIG_STM32H7_SYSCFG is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/micoair/h743-aio/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_INITTHREAD_PRIORITY=254
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004b
+CONFIG_CDCACM_PRODUCTSTR="MicoAir743AIO"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3162
+CONFIG_CDCACM_VENDORSTR="MicoAir"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=3194
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SPI=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000

boards/micoair/h743-aio/nuttx-config/include/board.h

@@ -0,0 +1,415 @@
+/************************************************************************************
+ * nuttx-configs/px4_fmu-v6u/include/board.h
+ *
+ *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
+ *   Authors: David Sidrane <david.sidrane@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#ifndef __NUTTX_CONFIG_MICOAIR743AIO_INCLUDE_BOARD_H
+#define __NUTTX_CONFIG_MICOAIR743AIO_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdmmc.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The MicoAir743  board provides the following clock sources:
+ *
+ *   X1: 8 MHz crystal for HSE
+ *
+ * So we have these clock source available within the STM32
+ *
+ *   HSI: 64 MHz RC factory-trimmed
+ *   HSE:  8 MHz crystal for HSE
+ */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE = 8,000,000
+ *
+ * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ * Subject to:
+ *
+ *     1 <= PLLM <= 63
+ *     4 <= PLLN <= 512
+ *   150 MHz <= PLL_VCOL <= 420MHz
+ *   192 MHz <= PLL_VCOH <= 836MHz
+ *
+ * SYSCLK  = PLL_VCO / PLLP
+ * CPUCLK  = SYSCLK / D1CPRE
+ * Subject to
+ *
+ *   PLLP1   = {2, 4, 6, 8, ..., 128}
+ *   PLLP2,3 = {2, 3, 4, ..., 128}
+ *   CPUCLK <= 480 MHz
+ */
+
+#define STM32_BOARD_USEHSE
+
+#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
+
+/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
+ *
+ *   PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz
+ *
+ *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
+ *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
+ *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
+ */
+
+#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVP1EN | \
+				 RCC_PLLCFGR_DIVQ1EN | \
+				 RCC_PLLCFGR_DIVR1EN)
+#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(120)
+#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
+#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
+#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
+
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 120)
+#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
+#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
+#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
+
+/* PLL2 */
+
+#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
+				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
+				  RCC_PLLCFGR_DIVP2EN | \
+				  RCC_PLLCFGR_DIVQ2EN | \
+				  RCC_PLLCFGR_DIVR2EN)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(2)
+#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
+#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
+#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
+#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
+
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+
+/* PLL3 */
+
+#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVQ3EN)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(2)
+#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
+#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
+#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
+#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
+
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
+#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+
+/* SYSCLK = PLL1P = 480MHz
+ * CPUCLK = SYSCLK / 1 = 480 MHz
+ */
+
+#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
+#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
+#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
+
+/* Configure Clock Assignments */
+
+/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
+ * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
+ */
+
+#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
+#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
+#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
+#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
+
+#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
+#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* Timer clock frequencies */
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Kernel Clock Configuration
+ *
+ * Note: look at Table 54 in ST Manual
+ */
+
+/* I2C123 clock source */
+
+#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
+
+/* I2C4 clock source */
+
+#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
+
+/* SPI123 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
+
+/* SPI45 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
+
+/* SPI6 clock source */
+
+#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
+
+/* USB 1 and 2 clock source */
+
+#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
+
+/* ADC 1 2 3 clock source */
+
+#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
+
+/* FDCAN 1 clock source */
+
+#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
+
+#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
+
+/* FLASH wait states
+ *
+ *  ------------ ---------- -----------
+ *  Vcore        MAX ACLK   WAIT STATES
+ *  ------------ ---------- -----------
+ *  1.15-1.26 V     70 MHz    0
+ *  (VOS1 level)   140 MHz    1
+ *                 210 MHz    2
+ *  1.05-1.15 V     55 MHz    0
+ *  (VOS2 level)   110 MHz    1
+ *                 165 MHz    2
+ *                 220 MHz    3
+ *  0.95-1.05 V     45 MHz    0
+ *  (VOS3 level)    90 MHz    1
+ *                 135 MHz    2
+ *                 180 MHz    3
+ *                 225 MHz    4
+ *  ------------ ---------- -----------
+ */
+
+#define BOARD_FLASH_WAITSTATES 2
+
+/* SDMMC definitions ********************************************************/
+
+/* Init 480kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+
+#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+
+/* 20 MHz Max for now - more reliable on some boards than 25 MHz
+ * 20 MHz = PLL1Q/(2*div), div =  PLL1Q/(2*freq), div = 6 = 240 / 40
+ */
+
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+
+#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
+
+/* LED definitions ******************************************************************/
+/* The board has two, LED_GREEN a Green LED and LED_BLUE a Blue LED,
+ * that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_LED3        2
+#define BOARD_NLEDS       3
+
+#define BOARD_LED_RED     BOARD_LED1
+#define BOARD_LED_GREEN   BOARD_LED2
+#define BOARD_LED_BLUE    BOARD_LED3
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+#define BOARD_LED3_BIT    (1 << BOARD_LED3)
+
+/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
+ * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
+ * events as follows:
+ *
+ *
+ *   SYMBOL                     Meaning                      LED state
+ *                                                        Red   Green Blue
+ *   ----------------------  --------------------------  ------ ------ ----*/
+
+#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
+#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
+#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
+#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
+#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
+#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
+#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
+#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
+#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
+
+/* Thus if the Green LED is statically on, NuttX has successfully booted and
+ * is, apparently, running normally.  If the Red LED is flashing at
+ * approximately 2Hz, then a fatal error has been detected and the system
+ * has halted.
+ */
+
+/* Alternate function pin selections ************************************************/
+
+#define GPIO_USART1_RX   GPIO_USART1_RX_2   /* PA10 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_2   /* PA9  */
+
+#define GPIO_USART2_RX   GPIO_USART2_RX_1   /* PA3  */
+#define GPIO_USART2_TX   GPIO_USART2_TX_1   /* PA2  */
+
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9  */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8  */
+
+#define GPIO_UART4_RX    GPIO_UART4_RX_2    /* PA1  */
+#define GPIO_UART4_TX    GPIO_UART4_TX_2    /* PA0  */
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7  */
+#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
+
+#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7  */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
+
+
+#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0  */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1  */
+
+
+/* SPI
+ *
+
+ */
+
+#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
+
+
+#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_2               /* PC2  */
+#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_3               /* PC3 */
+#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_5) /* PD3  */
+
+
+
+/* I2C
+ *
+
+ *
+ */
+
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1       /* PB6  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1       /* PB10 */
+#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1       /* PB11 */
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
+
+# define PROBE_INIT(mask)
+# define PROBE(n,s)
+# define PROBE_MARK(n)
+
+#endif  /*__NUTTX_CONFIG_MICOAIR743AIO_INCLUDE_BOARD_H  */

boards/micoair/h743-aio/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,36 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0 /* DMA1:39 */
+#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0 /* DMA1:40 */

boards/micoair/h743-aio/nuttx-config/nsh/defconfig

@@ -0,0 +1,244 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/micoair/h743-aio/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_PRODUCTID=0x0036
+CONFIG_CDCACM_PRODUCTSTR="MicoAir743AIO"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x1B8C
+CONFIG_CDCACM_VENDORSTR="MicoAir"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_MEMFAULT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=3194
+CONFIG_IOB_NBUFFERS=24
+CONFIG_IOB_NCHAINS=24
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_IOB=y
+CONFIG_MM_REGIONS=4
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDMMC1_SDIO_PULLUP=y
+CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_FLASH_OVERRIDE_I=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C2=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_HSECLOCK=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC1=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI2_DMA=y
+CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
+CONFIG_STM32H7_SPI_DMATHRESHOLD=8
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM3=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_TIM8=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_TXBUFSIZE=1500
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=1500
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_TXBUFSIZE=1500
+CONFIG_USART3_BAUD=57600
+CONFIG_USART3_RXBUFSIZE=600
+CONFIG_USART3_TXBUFSIZE=1500
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=1500
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_WATCHDOG=y

boards/micoair/h743-aio/nuttx-config/scripts/bootloader_script.ld

@@ -0,0 +1,213 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The Durandal-v1 uses an STM32H743II has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The Durandal has a Swtich on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
+ * drepresed, then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743ZI also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08000000, LENGTH = 2048K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/micoair/h743-aio/nuttx-config/scripts/script.ld

@@ -0,0 +1,228 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2020 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The board uses an STM32H743II and has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * There's a switch on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
+ * drepresed, then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743ZI also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1792K
+
+	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
+	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
+	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
+	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > FLASH
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > FLASH
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > FLASH
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > FLASH
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+
+		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
+		. = ALIGN(16);
+		FILL(0xffff)
+		. += 16;
+	} > AXI_SRAM AT > FLASH  = 0xffff
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > AXI_SRAM
+
+	/* Emit the the D3 power domain section for locating BDMA data */
+
+	.sram4_reserve (NOLOAD) :
+	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
+	} > SRAM4
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/micoair/h743-aio/src/CMakeLists.txt

@@ -0,0 +1,68 @@
+############################################################################
+#
+#   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
+	add_library(drivers_board
+		bootloader_main.c
+		usb.c
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch
+			nuttx_drivers
+			bootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
+
+else()
+	add_library(drivers_board
+		i2c.cpp
+		init.c
+		led.c
+		sdio.c
+		spi.cpp
+		timer_config.cpp
+		usb.c
+	)
+	add_dependencies(drivers_board arch_board_hw_info)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_io_pins
+			arch_spi
+			arch_board_hw_info
+			drivers__led
+			nuttx_arch
+			nuttx_drivers
+			px4_layer
+	)
+endif()

boards/micoair/h743-aio/src/board_config.h

@@ -0,0 +1,199 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * Board internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+#include <stm32_gpio.h>
+
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+
+// #define FLASH_BASED_PARAMS
+
+
+/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
+
+#  define GPIO_nLED_RED         /* PE5   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
+#  define GPIO_nLED_GREEN       /* PE6   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN6)
+#  define GPIO_nLED_BLUE        /* PE4   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
+
+#  define BOARD_HAS_CONTROL_STATUS_LEDS      1
+#  define BOARD_OVERLOAD_LED     LED_RED
+#  define BOARD_ARMED_STATE_LED  LED_BLUE
+
+
+/*
+ * ADC channels
+ *
+ * These are the channel numbers of the ADCs of the microcontroller that
+ * can be used by the Px4 Firmware in the adc driver
+ */
+
+/* ADC defines to be used in sensors.cpp to read from a particular channel */
+#define SYSTEM_ADC_BASE STM32_ADC1_BASE
+#define ADC1_CH(n)                  (n)
+
+/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
+#define PX4_ADC_GPIO  \
+	/* PC0  */  GPIO_ADC123_INP10, \
+	/* PC1  */  GPIO_ADC123_INP11
+
+
+/* Define Channel numbers must match above GPIO pin IN(n)*/
+#define ADC_BATTERY_VOLTAGE_CHANNEL     /* PC0  */  ADC1_CH(10)
+#define ADC_BATTERY_CURRENT_CHANNEL     /* PC1  */  ADC1_CH(11)
+
+
+#define ADC_CHANNELS \
+	((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
+	 (1 << ADC_BATTERY_CURRENT_CHANNEL))
+
+
+/* Define Battery 1 Voltage Divider and A per V
+ */
+
+// #define BOARD_BATTERY1_V_DIV         (11.0f)     /* measured with the provided PM board */
+// #define BOARD_BATTERY1_A_PER_V       (40.0f)
+// #define BOARD_BATTERY2_V_DIV         (11.0f)     /* measured with the provided PM board */
+
+
+/* PWM
+ */
+#define DIRECT_PWM_OUTPUT_CHANNELS   9
+#define DIRECT_INPUT_TIMER_CHANNELS  9
+
+#define BOARD_HAS_PWM  DIRECT_PWM_OUTPUT_CHANNELS
+
+
+#define GPIO_TONE_ALARM_IDLE    /* PD15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)
+#define GPIO_TONE_ALARM_GPIO    /* PD15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN15)
+
+/* USB OTG FS
+ *
+ * PA8  OTG_FS_VBUS VBUS sensing
+ */
+
+#define GPIO_OTGFS_VBUS         /* PA8 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN8)
+
+
+/* High-resolution timer */
+#define HRT_TIMER               2  /* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL       1  /* use capture/compare channel 3 */
+
+
+/* RC Serial port */
+#define RC_SERIAL_PORT          "/dev/ttyS4"
+#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT
+
+/* SD Card */
+#define SDIO_SLOTNO             0  /* Only one slot */
+#define SDIO_MINOR              0
+
+/* This board provides a DMA pool and APIs */
+#define BOARD_DMA_ALLOC_POOL_SIZE 5120
+
+/* This board provides the board_on_reset interface */
+#define BOARD_HAS_ON_RESET 1
+
+#define PX4_GPIO_INIT_LIST { \
+		PX4_ADC_GPIO, \
+		GPIO_TONE_ALARM_IDLE,             \
+	}
+
+#define BOARD_ENABLE_CONSOLE_BUFFER
+
+#define FLASH_BASED_PARAMS
+
+#define BOARD_NUM_IO_TIMERS 4
+
+
+__BEGIN_DECLS
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void);
+
+/****************************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the board.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+extern void stm32_usbinitialize(void);
+
+extern void board_peripheral_reset(int ms);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS

boards/micoair/h743-aio/src/bootloader_main.c

@@ -0,0 +1,75 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file bootloader_main.c
+ *
+ * FMU-specific early startup code for bootloader
+*/
+
+#include "board_config.h"
+#include "bl.h"
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <chip.h>
+#include <stm32_uart.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+#include <px4_platform_common/init.h>
+
+extern int sercon_main(int c, char **argv);
+
+__EXPORT void board_on_reset(int status) {}
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	/* configure USB interfaces */
+	stm32_usbinitialize();
+}
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	return 0;
+}
+
+void board_late_initialize(void)
+{
+	sercon_main(0, NULL);
+}
+
+extern void sys_tick_handler(void);
+void board_timerhook(void)
+{
+	sys_tick_handler();
+}

boards/micoair/h743-aio/src/hw_config.h

@@ -0,0 +1,135 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+/****************************************************************************
+ * 10-8--2016:
+ *  To simplify the ripple effect on the tools, we will be using
+ *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
+ *  moving forward all Bootloaders must contain the prefix "PX4 BL "
+ *  in the USBDEVICESTRING
+ *  This Change will be made in an upcoming BL release
+ ****************************************************************************/
+/*
+ * Define usage to configure a bootloader
+ *
+ *
+ * Constant                example          Usage
+ * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
+ * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
+ * BOARD_FMUV2
+ * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
+ * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
+ * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
+ * USBPRODUCTID         0x0011                - PID Should match defconfig
+ * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
+ *                                               delay provided by an APP FW
+ * BOARD_TYPE           9                     - Must match .prototype boad_id
+ * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
+ * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
+ * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
+ * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
+ *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
+ *                                              programmatically
+ *
+ * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
+ *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
+ *                                               during a FW upgrade.
+ *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
+ *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
+ *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
+ *                                               in the table.
+ *
+ * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
+ *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
+ *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
+ *                                                                        and hence the address space of FLASH to erase and program.
+ * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
+ * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
+ *
+ * * Other defines are somewhat self explanatory.
+ */
+
+/* Boot device selection list*/
+#define USB0_DEV       0x01
+#define SERIAL0_DEV    0x02
+#define SERIAL1_DEV    0x04
+
+#define APP_LOAD_ADDRESS               0x08020000
+#define BOOTLOADER_DELAY               5000
+#define INTERFACE_USB                  1
+#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
+#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
+
+//#define USE_VBUS_PULL_DOWN
+#define INTERFACE_USART                1
+#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
+#define BOOT_DELAY_ADDRESS             0x000001a0
+#define BOARD_TYPE                     1176
+#define BOARD_FLASH_SECTORS            (14)
+#define BOARD_FLASH_SIZE               (16 * 128 * 1024)
+#define APP_RESERVATION_SIZE 	       (1 * 128 * 1024)
+
+#define OSC_FREQ                       8
+
+#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
+#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_GREEN // GREEN
+#define BOARD_LED_ON                   0
+#define BOARD_LED_OFF                  1
+
+#define SERIAL_BREAK_DETECT_DISABLED   1
+
+#if !defined(ARCH_SN_MAX_LENGTH)
+# define ARCH_SN_MAX_LENGTH 12
+#endif
+
+#if !defined(APP_RESERVATION_SIZE)
+#  define APP_RESERVATION_SIZE 0
+#endif
+
+#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
+#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
+#endif
+
+#if !defined(USB_DATA_ALIGN)
+# define USB_DATA_ALIGN
+#endif
+
+#ifndef BOOT_DEVICES_SELECTION
+#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif
+
+#ifndef BOOT_DEVICES_FILTER_ONUSB
+#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif

boards/micoair/h743-aio/src/i2c.cpp

@@ -0,0 +1,39 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusExternal(1),
+	initI2CBusInternal(2),
+};

boards/micoair/h743-aio/src/init.c

@@ -0,0 +1,203 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * FMU-specific early startup code. This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialisation.
+ */
+
+#include "board_config.h"
+
+#include <syslog.h>
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <systemlib/px4_macros.h>
+#include <px4_arch/io_timer.h>
+#include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+#include <px4_platform/board_dma_alloc.h>
+
+# if defined(FLASH_BASED_PARAMS)
+#  include <parameters/flashparams/flashfs.h>
+#endif
+
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+__END_DECLS
+
+/************************************************************************************
+ * Name: board_peripheral_reset
+ *
+ * Description:
+ *
+ ************************************************************************************/
+__EXPORT void board_peripheral_reset(int ms)
+{
+	UNUSED(ms);
+}
+
+/************************************************************************************
+ * Name: board_on_reset
+ *
+ * Description:
+ * Optionally provided function called on entry to board_system_reset
+ * It should perform any house keeping prior to the rest.
+ *
+ * status - 1 if resetting to boot loader
+ *          0 if just resetting
+ *
+ ************************************************************************************/
+__EXPORT void board_on_reset(int status)
+{
+	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+	}
+
+	if (status >= 0) {
+		up_mdelay(6);
+	}
+}
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+__EXPORT void stm32_boardinitialize(void)
+{
+	/* Reset PWM first thing */
+	board_on_reset(-1);
+
+	/* configure LEDs */
+	board_autoled_initialize();
+
+	/* configure pins */
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	/* configure SPI interfaces */
+	stm32_spiinitialize();
+
+	/* configure USB interfaces */
+	stm32_usbinitialize();
+
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX;
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	/* Need hrt running before using the ADC */
+	px4_platform_init();
+
+	/* configure the DMA allocator */
+	if (board_dma_alloc_init() < 0) {
+		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
+	}
+
+	/* initial LED state */
+	drv_led_start();
+	led_off(LED_RED);
+	led_off(LED_BLUE);
+
+	if (board_hardfault_init(2, true) != 0) {
+		led_on(LED_BLUE);
+	}
+
+#ifdef CONFIG_MMCSD
+	int ret = stm32_sdio_initialize();
+
+	if (ret != OK) {
+		led_on(LED_BLUE);
+		return ret;
+	}
+
+#endif
+
+// TODO：internal flash store parameters
+#if defined(FLASH_BASED_PARAMS)
+	static sector_descriptor_t params_sector_map[] = {
+		{15, 128 * 1024, 0x081E0000},
+		{0, 0, 0},
+	};
+
+	/* Initialize the flashfs layer to use heap allocated memory */
+	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
+
+	if (result != OK) {
+		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
+		led_on(LED_RED);
+	}
+
+#endif
+
+	/* Configure the HW based on the manifest */
+	px4_platform_configure();
+
+	return OK;
+}

boards/micoair/h743-aio/src/led.c

@@ -0,0 +1,114 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS
+
+#  define xlat(p) (p)
+static uint32_t g_ledmap[] = {
+	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
+	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
+	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
+};
+
+__EXPORT void led_init(void)
+{
+	/* Configure LED GPIOs for output */
+	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
+		if (g_ledmap[l] != 0) {
+			stm32_configgpio(g_ledmap[l]);
+		}
+	}
+}
+
+static void phy_set_led(int led, bool state)
+{
+	/* Drive Low to switch on */
+	if (g_ledmap[led] != 0) {
+		stm32_gpiowrite(g_ledmap[led], !state);
+	}
+}
+
+static bool phy_get_led(int led)
+{
+	/* If Low it is on */
+	if (g_ledmap[led] != 0) {
+		return !stm32_gpioread(g_ledmap[led]);
+	}
+
+	return false;
+}
+
+
+__EXPORT void led_on(int led)
+{
+	phy_set_led(xlat(led), true);
+}
+
+__EXPORT void led_off(int led)
+{
+	phy_set_led(xlat(led), false);
+}
+
+__EXPORT void led_toggle(int led)
+{
+	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
+}

boards/micoair/h743-aio/src/sdio.c

@@ -0,0 +1,177 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <board_config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+
+#include "chip.h"
+#include "board_config.h"
+#include "stm32_gpio.h"
+#include "stm32_sdmmc.h"
+
+#ifdef CONFIG_MMCSD
+
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Card detections requires card support and a card detection GPIO */
+
+#define HAVE_NCD   1
+#if !defined(GPIO_SDMMC1_NCD)
+#  undef HAVE_NCD
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static FAR struct sdio_dev_s *sdio_dev;
+#ifdef HAVE_NCD
+static bool g_sd_inserted = 0xff; /* Impossible value */
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_ncd_interrupt
+ *
+ * Description:
+ *   Card detect interrupt handler.
+ *
+ ****************************************************************************/
+
+#ifdef HAVE_NCD
+static int stm32_ncd_interrupt(int irq, FAR void *context)
+{
+	bool present;
+
+	present = !stm32_gpioread(GPIO_SDMMC1_NCD);
+
+	if (sdio_dev && present != g_sd_inserted) {
+		sdio_mediachange(sdio_dev, present);
+		g_sd_inserted = present;
+	}
+
+	return OK;
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void)
+{
+	int ret;
+
+#ifdef HAVE_NCD
+	/* Card detect */
+
+	bool cd_status;
+
+	/* Configure the card detect GPIO */
+
+	stm32_configgpio(GPIO_SDMMC1_NCD);
+
+	/* Register an interrupt handler for the card detect pin */
+
+	stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
+#endif
+
+	/* Mount the SDIO-based MMC/SD block driver */
+	/* First, get an instance of the SDIO interface */
+
+	finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
+
+	sdio_dev = sdio_initialize(SDIO_SLOTNO);
+
+	if (!sdio_dev) {
+		syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
+		return -ENODEV;
+	}
+
+	/* Now bind the SDIO interface to the MMC/SD driver */
+
+	finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
+
+	ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
+
+	if (ret != OK) {
+		syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
+		return ret;
+	}
+
+	finfo("Successfully bound SDIO to the MMC/SD driver\n");
+
+#ifdef HAVE_NCD
+	/* Use SD card detect pin to check if a card is g_sd_inserted */
+
+	cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
+	finfo("Card detect : %d\n", cd_status);
+
+	sdio_mediachange(sdio_dev, cd_status);
+#else
+	/* Assume that the SD card is inserted.  What choice do we have? */
+
+	sdio_mediachange(sdio_dev, true);
+#endif
+
+	return OK;
+}
+
+#endif /* CONFIG_MMCSD */

boards/micoair/h743-aio/src/spi.cpp

@@ -0,0 +1,47 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI2, {
+		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortD, GPIO::Pin5}, SPI::DRDY{GPIO::PortD, GPIO::Pin7}),
+		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortD, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin14}),
+		initSPIDevice(DRV_IMU_DEVTYPE_BMI270, SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortE, GPIO::Pin2}),
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/micoair/h743-aio/src/timer_config.cpp

@@ -0,0 +1,55 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/io_timer_hw_description.h>
+
+constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
+	initIOTimer(Timer::Timer1, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer3, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
+};
+
+constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
+	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}),
+	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}),
+	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
+	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel1}, {GPIO::PortD, GPIO::Pin12}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
+};
+
+constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
+	initIOTimerChannelMapping(io_timers, timer_io_channels);

boards/micoair/h743-aio/src/usb.c

@@ -0,0 +1,78 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file usb.c
+ *
+ * Board-specific USB functions.
+ */
+
+#include "board_config.h"
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+#include <stm32_otg.h>
+#include <debug.h>
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbinitialize(void)
+{
+	/* The OTG FS has an internal soft pull-up */
+
+	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32H7_OTGFS
+	stm32_configgpio(GPIO_OTGFS_VBUS);
+#endif
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+	uinfo("resume: %d\n", resume);
+}

boards/micoair/h743/default.px4board

@@ -15,7 +15,6 @@ CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI270=y
 CONFIG_COMMON_INS=y
 CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_DRIVERS_OSD_ATXXXX=y
 CONFIG_DRIVERS_PPS_CAPTURE=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_COMMON_RC=y

boards/micoair/h743/init/rc.board_defaults

@@ -12,7 +12,7 @@ param set-default SYS_HAS_MAG 1
 param set-default PWM_MAIN_TIM0 -4
 param set-default RC_INPUT_PROTO -1
 
-param set-default IMU_GYRO_RATEMAX 2000
+param set-default IMU_GYRO_CUTOFF 80
 param set-default SYS_AUTOSTART 4001
 param set-default MC_PITCHRATE_K 0.4
 param set-default MC_ROLLRATE_K 0.35

boards/micoair/h743/init/rc.board_extras

@@ -4,4 +4,4 @@
 #------------------------------------------------------------------------------
 
 # enable onboard OSD chip
-atxxxx start -s
+# atxxxx start -s

boards/micoair/h743/nuttx-config/include/board.h

@@ -391,9 +391,9 @@
 
 #define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
 
-#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
-#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
-#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5 */
+//#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
+//#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
+//#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5 */
 
 #define GPIO_SPI2_MISO   GPIO_SPI2_MISO_2               /* PC2  */
 #define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_3               /* PC3 */

boards/micoair/h743/nuttx-config/nsh/defconfig

@@ -194,7 +194,6 @@ CONFIG_STM32H7_SAVE_CRASHDUMP=y
 CONFIG_STM32H7_SDMMC1=y
 CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_SPI1=y
 CONFIG_STM32H7_SPI2=y
 CONFIG_STM32H7_SPI2_DMA=y
 CONFIG_STM32H7_SPI2_DMA_BUFFER=4096

boards/micoair/h743/src/spi.cpp

@@ -37,9 +37,6 @@
 
 
 constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
-	initSPIBus(SPI::Bus::SPI1, {
-		initSPIDevice(DRV_OSD_DEVTYPE_ATXXXX, SPI::CS{GPIO::PortB, GPIO::Pin12}),
-	}),
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortD, GPIO::Pin5}),
 		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortD, GPIO::Pin4}),

boards/modalai/voxl2/libfc-sensor-api

@@ -1 +1 @@
-Subproject commit ca16e99074641a10d153961291243ede7720c2e2
+Subproject commit 85151aaf6ba8b24ce82b387e088452c63f7e2096

boards/mro/x21-777/default.px4board

@@ -67,7 +67,7 @@ CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
+CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=n
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y

boards/nxp/tropic-community/cmake/upload.cmake

@@ -0,0 +1,44 @@
+############################################################################
+#
+#   Copyright (c) 2024 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+
+set(PX4_FW_NAME ${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_${PX4_BOARD_LABEL}.hex)
+
+add_custom_target(upload_teensy
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/teensy_uploader.py --port ${serial_ports} ${PX4_FW_NAME} --vendor-id 0x1FC9 --product-id 0x0024
+	DEPENDS ${PX4_FW_NAME}
+	COMMENT "uploading px4"
+	VERBATIM
+	USES_TERMINAL
+	WORKING_DIRECTORY ${PX4_BINARY_DIR}
+)

boards/nxp/tropic-community/default.px4board

@@ -0,0 +1,99 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ETHERNET=y
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
+CONFIG_BOARD_PARAM_FILE="/fs/microsd/mtd_params"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
+CONFIG_DRIVERS_BAROMETER_MS5611=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_COMMON_INS=y
+CONFIG_COMMON_LIGHT=y
+CONFIG_DRIVERS_LIGHTS_RGBLED_PWM=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_DRIVERS_OSD_MSP_OSD=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_POWER_MONITOR_INA228=y
+CONFIG_DRIVERS_POWER_MONITOR_INA238=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_RC_INPUT=y
+CONFIG_DRIVERS_SAFETY_BUTTON=y
+CONFIG_COMMON_TELEMETRY=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_COMMON_UWB=y
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
+CONFIG_MODULES_FW_RATE_CONTROL=y
+CONFIG_MODULES_GIMBAL=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODE_NAVIGATOR_VTOL_TAKEOFF=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_UXRCE_DDS_CLIENT=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_DUMPFILE=y
+CONFIG_SYSTEMCMDS_I2C_LAUNCHER=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_NETMAN=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
+CONFIG_SYSTEMCMDS_SERIAL_TEST=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y