safety: allow for level logic in safety switch

Fixed wording

.github/labeler.yml

@@ -0,0 +1,10 @@
+# Labeler configuration file for GitHub Actions
+# The action is ./.github/workflows/label.yml
+# Docs for the syntax in this file can be found at
+# https://github.com/actions/labeler
+
+
+# Add 'Documentation' label to any changes within 'docs' folder or any subfolders
+"Documentation+📑":
+- changed-files:
+  - any-glob-to-any-file: docs/**

.github/workflows/checks.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/clang-tidy.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 jobs:
   build:
     runs-on: ubuntu-latest

.github/workflows/compile_macos.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/compile_ubuntu.yml

@@ -9,13 +9,11 @@ on:
       - 'release/**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
       - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 env:
   RUNS_IN_DOCKER: true

.github/workflows/ekf_functional_change_indicator.yml

@@ -6,7 +6,6 @@ on:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   unit_tests:

.github/workflows/ekf_update_change_indicator.yml

@@ -4,7 +4,6 @@ on:
   push:
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   unit_tests:

.github/workflows/failsafe_sim.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/flash_analysis.yml

@@ -11,13 +11,11 @@ on:
       - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
       - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 env:
   MIN_FLASH_POS_DIFF_FOR_COMMENT: 50

.github/workflows/itcm_check.yml

@@ -9,13 +9,11 @@ on:
       - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
       - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   check_itcm:

.github/workflows/label.yml

@@ -0,0 +1,21 @@
+# This workflow will triage pull requests and apply a label based on the
+# paths that are modified in the pull request.
+# The paths are set up in .github/labeler.yml
+#
+# See: https://github.com/actions/labeler
+
+name: Labeler
+on: [pull_request_target]
+
+jobs:
+  label:
+
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      pull-requests: write
+
+    steps:
+    - uses: actions/labeler@v5
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/mavros_mission_tests.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/mavros_offboard_tests.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/nuttx_env_config.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/python_checks.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/ros_translation_node.yml

@@ -5,13 +5,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 defaults:
   run:
     shell: bash

.github/workflows/sitl_tests.yml

@@ -11,13 +11,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

CMakeLists.txt

@@ -496,7 +496,6 @@ add_custom_target(uorb_graph DEPENDS ${uorb_graph_config})
 include(bloaty)
 
 
-include(doxygen)
 include(metadata)
 include(package)
 

Makefile

@@ -365,7 +365,7 @@ coverity_scan: px4_sitl_default
 
 # Documentation
 # --------------------------------------------------------------------
-.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata doxygen
+.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata
 
 parameters_metadata:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen
@@ -381,12 +381,6 @@ extract_events:
 
 px4_metadata: parameters_metadata airframe_metadata module_documentation extract_events
 
-doxygen:
-	@mkdir -p "$(SRC_DIR)"/build/doxygen
-	@cd "$(SRC_DIR)"/build/doxygen && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DBUILD_DOXYGEN=ON
-	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/doxygen
-	@touch "$(SRC_DIR)"/build/doxygen/Documentation/.nojekyll
-
 # Style
 # --------------------------------------------------------------------
 .PHONY: check_format format check_newlines

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -46,3 +46,22 @@ param set-default PWM_MAIN_FUNC3 203
 param set-default PWM_MAIN_FUNC4 101
 
 param set-default EKF2_GPS_DELAY 0
+
+# Rate controllers
+param set-default FW_RR_P 0.0500
+param set-default FW_RR_I 2.0000
+param set-default FW_RR_D 0.0000
+param set-default FW_RR_FF 0.0000
+param set-default FW_RR_IMAX 1.0000
+
+param set-default FW_PR_P 0.0800
+param set-default FW_PR_I 2.5000
+param set-default FW_PR_D 0.0000
+param set-default FW_PR_FF 0.0000
+param set-default FW_PR_IMAX 1.0000
+
+param set-default FW_YR_P 0.0500
+param set-default FW_YR_I 3.0000
+param set-default FW_YR_D 0.0000
+param set-default FW_YR_FF 0.0000
+param set-default FW_YR_IMAX 1.0000

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -39,7 +39,7 @@ param set-default RO_YAW_P 5
 param set-default RO_SPEED_LIM 2
 param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 0.1
-param set-defatul RO_SPEED_RED 1
+param set-default RO_SPEED_RED 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d-posix/airframes/50000_gz_rover_differential

@@ -0,0 +1,56 @@
+#!/bin/sh
+# @name Generic Differential Rover
+# @type Rover
+# @class Rover
+
+. ${R}etc/init.d/rc.rover_differential_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_differential}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+param set-default NAV_ACC_RAD 0.5
+
+# Differential Parameters
+param set-default RD_WHEEL_TRACK 0.6
+param set-default RD_TRANS_DRV_TRN 0.785398
+param set-default RD_TRANS_TRN_DRV 0.174533
+
+# Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.01
+param set-default RO_YAW_RATE_P 0.25
+param set-default RO_YAW_RATE_LIM 250
+param set-default RO_YAW_ACCEL_LIM 400
+param set-default RO_YAW_DECEL_LIM 800
+param set-default RO_YAW_RATE_CORR 1
+
+# Attitude Control Parameters
+param set-default RO_YAW_P 5
+
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 4
+param set-default RO_DECEL_LIM 6
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 2
+param set-default RO_SPEED_LIM 1.8
+param set-default RO_SPEED_I 0.01
+param set-default RO_SPEED_P 0.01
+param set-default RO_SPEED_RED 1
+
+# Pure Pursuit parameters
+param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1
+
+# Actuator mapping
+param set-default SIM_GZ_WH_FUNC1 101 # right wheel
+param set-default SIM_GZ_WH_MIN1 80
+param set-default SIM_GZ_WH_MAX1 120
+param set-default SIM_GZ_WH_DIS1 100
+
+param set-default SIM_GZ_WH_FUNC2 102 # left wheel
+param set-default SIM_GZ_WH_MIN2 80
+param set-default SIM_GZ_WH_MAX2 120
+param set-default SIM_GZ_WH_DIS2 100

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -114,6 +114,8 @@ px4_add_romfs_files(
 	17001_flightgear_tf-g1
 	17002_flightgear_tf-g2
 
+	50000_gz_rover_differential
+
 	71002_gz_spacecraft_2d
 
 	# [22000, 22999] Reserve for custom models

ROMFS/px4fmu_common/init.d/airframes/50000_generic_rover_differential

@@ -5,8 +5,5 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_differential_defaults

ROMFS/px4fmu_common/init.d/airframes/50001_aion_robotics_r1_rover

@@ -7,9 +7,6 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_differential_defaults
 

ROMFS/px4fmu_common/init.d/airframes/51000_generic_rover_ackermann

@@ -5,8 +5,5 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_ackermann_defaults

ROMFS/px4fmu_common/init.d/airframes/51001_axial_scx10_2_trail_honcho

@@ -7,9 +7,6 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_ackermann_defaults
 

ROMFS/px4fmu_common/init.d/airframes/52000_generic_rover_mecanum

@@ -5,8 +5,5 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_mecanum_defaults

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -234,6 +234,7 @@ then
 		lis3mdl -X -q -a 0x1c start
 	fi
 	qmc5883l -X -q start
+	qmc5883p -X -q start
 	rm3100 -X -q start
 
 	# start last (wait for possible icm20948 passthrough mode)

Tools/astyle/check_newlines.sh

@@ -3,14 +3,14 @@
 return_value=0
 
 # Check if there are files checked in that don't end in a newline (POSIX requirement)
-git grep --cached -Il '' -- ':!docs/*' | xargs -L1 bash -c 'if test "$(tail -c 1 "$0")"; then echo "No new line at end of $0"; exit 1; fi'
+git grep --cached -Il '' -- ':!docs/public/' ':!docs/ko/' ':!docs/uk/' ':!docs/zh/' | xargs -L1 bash -c 'if test "$(tail -c 1 "$0")"; then echo "No new line at end of $0"; exit 1; fi'
 
 if [ $? -ne 0 ]; then
 	return_value=1
 fi
 
 # Check if there are files checked in that have duplicate newlines at the end (fail trailing whitespace checks)
-git grep --cached -Il '' -- ':!docs/*' | xargs -L1 bash -c 'if tail -c 2 "$0" | ( read x && read y && [ x"$x" = x ] && [ x"$y" = x ]); then echo "Multiple newlines at the end of $0"; exit 1; fi'
+git grep --cached -Il '' -- ':!docs/public/' ':!docs/ko/' ':!docs/uk/' ':!docs/zh/' | xargs -L1 bash -c 'if tail -c 2 "$0" | ( read x && read y && [ x"$x" = x ] && [ x"$y" = x ]); then echo "Multiple newlines at the end of $0"; exit 1; fi'
 
 if [ $? -ne 0 ]; then
 	return_value=1

boards/diatone/mamba-f405-mk2/default.px4board

@@ -14,6 +14,7 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_MAGNETOMETER_AKM_AK8963=y
 CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
 CONFIG_DRIVERS_PWM_OUT=y

boards/diatone/mamba-f405-mk2/init/rc.board_sensors

@@ -5,14 +5,16 @@
 
 board_adc start
 
-if ! mpu6000 -R 6 -s start
-then
+if ! mpu6000 -R 6 -s start; then
 	# some boards such as the Hobbywing XRotor F4 G2 use the ICM-20602
-	icm20602 -s -R 6 start
+	if ! icm20602 -s -R 6 start; then
+		# The ICM-42688-P is used on the Diatone Mamba F405 MK2 v2
+		icm42688p -s -R 4 start
+	fi
 fi
 
 if ! hmc5883 -T -X start
-then	
+then
 	if mpu9250_i2c -X -b 2 -a 0x68 -R 28 start; then
 		sleep 1 # wait for mpu9250 to be configured with bypass enabled
 		ak8963 -X -b 2 -R 30 start # -R 34

boards/diatone/mamba-f405-mk2/src/spi.cpp

@@ -39,6 +39,7 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI1, {
 		initSPIDevice(DRV_IMU_DEVTYPE_MPU6000, SPI::CS{GPIO::PortA, GPIO::Pin4}),
 		initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortA, GPIO::Pin4}),
+		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin4}),
 	}),
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_OSD_DEVTYPE_ATXXXX, SPI::CS{GPIO::PortB, GPIO::Pin12}),

boards/holybro/kakuteh7-wing/default.px4board

@@ -6,6 +6,7 @@ CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
 CONFIG_DRIVERS_BAROMETER_GOERTEK_SPA06=y
@@ -62,7 +63,6 @@ CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y

boards/holybro/kakuteh7dualimu/default.px4board

@@ -6,6 +6,7 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS5"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
@@ -30,7 +31,6 @@ CONFIG_DRIVERS_UAVCAN=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=6
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
@@ -70,22 +70,17 @@ CONFIG_MODULES_NAVIGATOR=y
 CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+# CONFIG_MODULES_TEMPERATURE_COMPENSATION is not set
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
 CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
 CONFIG_SYSTEMCMDS_UORB=y
 CONFIG_SYSTEMCMDS_USB_CONNECTED=y

boards/holybro/kakuteh7dualimu/firmware.prototype

@@ -7,7 +7,7 @@
     "summary": "KAKUTEH7",
     "version": "0.1",
     "image_size": 0,
-    "image_maxsize": 1835008,
+    "image_maxsize": 1703936,
     "git_identity": "",
     "board_revision": 0
 }

boards/holybro/kakuteh7dualimu/nuttx-config/scripts/script.ld

@@ -110,7 +110,7 @@
 MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1664K /* params in last two sectors */
 
 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K

boards/holybro/kakuteh7dualimu/src/hw_config.h

@@ -72,7 +72,7 @@
 #define BOARD_TYPE                     5409
 #define BOARD_FLASH_SECTORS            (14)
 #define BOARD_FLASH_SIZE               (16 * 128 * 1024)
-#define APP_RESERVATION_SIZE           (1 * 128 * 1024)
+#define APP_RESERVATION_SIZE           (2 * 128 * 1024)
 
 #define OSC_FREQ                       8
 

boards/holybro/kakuteh7dualimu/src/led.c

@@ -48,6 +48,11 @@
  * of leds for system indication at will and there is no
  * separate switch, we need to build independent of the
  * CONFIG_ARCH_LEDS configuration switch.
+ *
+ * KakuteH7 DualIMU LED configuration:
+ * - Red LED (PE9): TRIP LED, active high
+ * - Blue LED (PC2): Status LED, active low
+ * - Green LED: Hardware controlled, always on when powered (no software control)
  */
 __BEGIN_DECLS
 extern void led_init(void);
@@ -56,11 +61,28 @@ extern void led_off(int led);
 extern void led_toggle(int led);
 __END_DECLS
 
+#ifdef CONFIG_ARCH_LEDS
+static bool nuttx_owns_leds = true;
+//                                B  R  S  G
+//                                0  1  2  3
+static const uint8_t xlatpx4[] = {1, 0, 4, 2};
+#  define xlat(p) xlatpx4[(p)]
+static uint32_t g_ledmap[] = {
+	GPIO_LED_RED,                       // Indexed by BOARD_LED_RED
+	GPIO_nLED_BLUE,                     // Indexed by BOARD_LED_BLUE
+};
 
-#define xlat(p) (p)
+static bool g_led_inverted[] = {
+	false, // LED_RED is active high
+	true,  // LED_BLUE is active low
+};
+
+#else
+
+#  define xlat(p) (p)
 static uint32_t g_ledmap[] = {
 	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
-	GPIO_LED_RED,                      // Indexed by LED_RED
+	GPIO_LED_RED,                       // Indexed by LED_RED
 };
 
 static bool g_led_inverted[] = {
@@ -68,6 +90,7 @@ static bool g_led_inverted[] = {
 	false, // LED_RED is active high
 };
 
+#endif
 
 __EXPORT void led_init(void)
 {

boards/nxp/tropic-community/nuttx-config/scripts/itcm_functions_includes.ld

@@ -561,7 +561,7 @@
 *(.text.uart_xmitchars_done)
 *(.text._ZN4EKF225PublishYawEstimatorStatusERKy)
 *(.text.sin)
-*(.text._ZN6Safety19safetyButtonHandlerEv)
+*(.text._ZN6Safety19safetySwitchHandlerEv)
 *(.text._ZN3Ekf19controlAuxVelFusionERKN9estimator9imuSampleE)
 *(.text._ZNK6matrix6MatrixIfLj2ELj1EEplERKS1_)
 *(.text._ZThn24_N7Sensors3RunEv)

boards/px4/fmu-v2/rover.px4board

@@ -1,15 +1,17 @@
+CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
+CONFIG_MODULES_FW_ATT_CONTROL=n
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_FW_MODE_MANAGER=n
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_RATE_CONTROL=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
 CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_DRIVERS_CAMERA_CAPTURE=y
-CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_OPTICAL_FLOW_PX4FLOW=y
-CONFIG_MODULES_CAMERA_FEEDBACK=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_ROVER_POS_CONTROL=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_MODULES_ROVER_ACKERMANN=y
+CONFIG_MODULES_ROVER_DIFFERENTIAL=y
+CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v3/rover.px4board

@@ -0,0 +1,17 @@
+CONFIG_MODULES_AIRSPEED_SELECTOR=n
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
+CONFIG_MODULES_FW_ATT_CONTROL=n
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_FW_MODE_MANAGER=n
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_RATE_CONTROL=n
+CONFIG_MODULES_MC_ATT_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
+CONFIG_MODULES_MC_POS_CONTROL=n
+CONFIG_MODULES_MC_RATE_CONTROL=n
+CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_MODULES_ROVER_ACKERMANN=y
+CONFIG_MODULES_ROVER_DIFFERENTIAL=y
+CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v4/rover.px4board

@@ -0,0 +1,17 @@
+CONFIG_MODULES_AIRSPEED_SELECTOR=n
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
+CONFIG_MODULES_FW_ATT_CONTROL=n
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_FW_MODE_MANAGER=n
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_RATE_CONTROL=n
+CONFIG_MODULES_MC_ATT_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
+CONFIG_MODULES_MC_POS_CONTROL=n
+CONFIG_MODULES_MC_RATE_CONTROL=n
+CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_MODULES_ROVER_ACKERMANN=y
+CONFIG_MODULES_ROVER_DIFFERENTIAL=y
+CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v4pro/rover.px4board

@@ -0,0 +1,17 @@
+CONFIG_MODULES_AIRSPEED_SELECTOR=n
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
+CONFIG_MODULES_FW_ATT_CONTROL=n
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_FW_MODE_MANAGER=n
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_RATE_CONTROL=n
+CONFIG_MODULES_MC_ATT_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
+CONFIG_MODULES_MC_POS_CONTROL=n
+CONFIG_MODULES_MC_RATE_CONTROL=n
+CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_MODULES_ROVER_ACKERMANN=y
+CONFIG_MODULES_ROVER_DIFFERENTIAL=y
+CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v5/rover.px4board

@@ -1,23 +1,17 @@
-CONFIG_DRIVERS_IRLOCK=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
 CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_MODULES_UUV_ATT_CONTROL=n
-CONFIG_MODULES_UUV_POS_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v5x/rover.px4board

@@ -1,4 +1,3 @@
-CONFIG_DRIVERS_IRLOCK=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
@@ -6,7 +5,6 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -14,7 +12,6 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v6c/rover.px4board

@@ -5,7 +5,6 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -13,7 +12,6 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v6u/rover.px4board

@@ -5,7 +5,6 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -13,7 +12,6 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v6x/rover.px4board

@@ -5,7 +5,6 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -13,7 +12,6 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v6xrt/nuttx-config/scripts/itcm_functions_includes.ld

@@ -573,7 +573,7 @@
 *(.text.uart_xmitchars_done)
 *(.text._ZN4EKF225PublishYawEstimatorStatusERKy)
 *(.text.sin)
-*(.text._ZN6Safety19safetyButtonHandlerEv)
+*(.text._ZN6Safety19safetySwitchHandlerEv)
 *(.text._ZN3Ekf19controlAuxVelFusionERKN9estimator9imuSampleE)
 *(.text._ZNK6matrix6MatrixIfLj2ELj1EEplERKS1_)
 *(.text._ZThn24_N7Sensors3RunEv)

boards/px4/fmu-v6xrt/rover.px4board

@@ -1,4 +1,3 @@
-CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_SF45_SERIAL=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
@@ -6,16 +5,14 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
 CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_SF45_SERIAL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/zeroone/x6/CMakeLists.txt

@@ -0,0 +1,34 @@
+############################################################################
+#
+#   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+add_subdirectory(pwm_voltage)

boards/zeroone/x6/default.px4board

@@ -20,6 +20,9 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM45686=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
+CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_COMMON_INS=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y

boards/zeroone/x6/init/rc.board_defaults

@@ -27,3 +27,6 @@ else
 fi
 
 safety_button start
+
+# pwm voltage 3.3V/5V switch
+pwm_voltage_apply start

boards/zeroone/x6/init/rc.board_sensors

@@ -43,6 +43,7 @@ then
 	set INA_CONFIGURED yes
 fi
 
+
 if param compare SENS_EN_INA238 1
 then
 	# Start Digital power monitors
@@ -55,96 +56,35 @@ then
 	set INA_CONFIGURED yes
 fi
 
-#Start Auterion Power Module selector for zeroone boards
-if ver hwbasecmp 009 010 011
+
+if ver hwtypecmp ZeroOneX6000
 then
-	pm_selector_auterion start
-else
-	if [ $INA_CONFIGURED = no ]
-	then
-		# INA226, INA228, INA238 auto-start
-		i2c_launcher start -b 1
-		if [ $HAVE_PM2 = yes ]
-		then
-			i2c_launcher start -b 2
-		fi
-	fi
+        # Internal SPI bus icm45686 with SPIX
+	icm45686 -b 2 -s -R 6 start       //X6 & X6 air
+
+	bmi088 -A -R 4 -s start           //X6
+	bmi088 -G -R 4 -s start           //X6
+
+	# Internal SPI bus icm45686 with SPIX
+	icm45686 -b 1 -s -R 8 start       //X6 & X6 air
 fi
 
-# Keep nesting shallow
-if ver hwtypecmp V6X006 V6X008
+
+if ver hwtypecmp ZeroOneX6001             //X6  PRO
 then
-	if ver hwtypecmp V6X006
-	then
-		# Internal SPI bus ICM45686
-		adis16470 -s -R 0 start
-		iim42652 -s -R 6 start
-		icm45686 -s -R 10 start
-	else
-		# Internal SPI bus 3x ICM45686
-		icm45686 -b 3 -s -R 0 start
-		icm45686 -b 2 -s -R 0 start
-		icm45686 -b 1 -s -R 10 start
-	fi
-else
-	if ver hwtypecmp V6X004
-	then
-		# Internal SPI bus ICM20649
-		icm20649 -s -R 6 start
-	else
-		# Internal SPI BMI088
-		if ver hwbasecmp 009 010 011
-		then
-			bmi088 -A -R 6 -s start
-			bmi088 -G -R 6 -s start
-		else
-			if ver hwtypecmp V6X010
-			then
-				bmi088 -A -R 0 -s start
-				bmi088 -G -R 0 -s start
-			else
-				bmi088 -A -R 4 -s start
-				bmi088 -G -R 4 -s start
-			fi
-		fi
-	fi
+	# Internal SPI bus IIM42653 with SPIX
+	iim42653 -b 2 -s -R 6 start
 
-	# Internal SPI bus ICM42688p
-	if ver hwbasecmp 009 010 011
-	then
-		icm42688p -R 12 -s start
-	else
-		if ver hwtypecmp V6X010
-		then
-			icm42688p -R 14 -s start
-		else
-			icm45686 -b 1 -s -R 8 start        //ZeroOne
-		fi
-	fi
+	bmi088 -A -R 4 -s start
+	bmi088 -G -R 4 -s start
 
-	if ver hwtypecmp V6X003 V6X004
-	then
-		# Internal SPI bus ICM-42670-P (hard-mounted)
-		icm42670p -R 10 -s start
-	else
-		if ver hwbasecmp 009 010 011
-		then
-			icm20602 -R 6 -s start
-		else
-			# Internal SPI bus ICM-20649 (hard-mounted)
-			icm45686 -b 2 -s -R 6 start        //ZeroOne
-		fi
-	fi
+	# Internal SPI bus IIM42653 with SPIX
+	iim42653 -b 1 -s -R 8 start
 fi
+
+
 rm3100 -I -b 4 start
 # Internal magnetometer on I2c
-# if ver hwtypecmp V6X001
-# then
-# 	rm3100 -I -b 4 start
-# else
-# 	# Internal magnetometer on I2C
-# 	bmm150 -I -R 0 start
-# fi
 
 # External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
 ist8310 -X -b 1 -R 10 start
@@ -156,24 +96,9 @@ ist8310 start -I -a 0x0E -R 12
 if param compare SENS_INT_BARO_EN 1
 then
 	icp201xx -I -a 0x64 start
-	# if ver hwtypecmp V6X001 V6X006 V6X008
-	# then
-	# 	icp201xx -I -a 0x64 start
-	# else
-	# 	bmp388 -I -a 0x77 start
-	# fi
 fi
 icp201xx -X start
 #external baro
-# if ver hwtypecmp V6X001
-# then
-# 	icp201xx -X start
-# else
-# 	bmp388 -X start
-# fi
-
-# Baro on I2C3
-ms5611 -X start
 
 unset INA_CONFIGURED
 unset HAVE_PM2

boards/zeroone/x6/pwm_voltage/CMakeLists.txt

@@ -1,6 +1,6 @@
 ############################################################################
 #
-#   Copyright (c) 2019 PX4 Development Team. All rights reserved.
+#   Copyright (c) 2025 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -31,31 +31,12 @@
 #
 ############################################################################
 
-# Doxygen
+px4_add_module(
+	MODULE modules__pwm_voltage_apply
+	MAIN pwm_voltage_apply
 
-option(BUILD_DOXYGEN "Build doxygen documentation" OFF)
-
-if (BUILD_DOXYGEN)
-	find_package(Doxygen)
-	if (DOXYGEN_FOUND)
-	    # set input and output files
-	    set(DOXYGEN_IN ${CMAKE_SOURCE_DIR}/Documentation/Doxyfile.in)
-	    set(DOXYGEN_OUT ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile)
-
-	    # request to configure the file
-	    configure_file(${DOXYGEN_IN} ${DOXYGEN_OUT} @ONLY)
-
-	    # note the option ALL which allows to build the docs together with the application
-	    add_custom_target(doxygen ALL
-	        COMMAND ${DOXYGEN_EXECUTABLE} ${DOXYGEN_OUT}
-	        WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
-			COMMENT "Generating documentation with Doxygen"
-			DEPENDS uorb_msgs parameters
-			VERBATIM
-			USES_TERMINAL
-			)
-
-	else()
-		message("Doxygen needs to be installed to generate documentation")
-	endif()
-endif()
+	SRCS
+		pwm_voltage.cpp
+	DEPENDS
+		px4_work_queue
+	)

boards/zeroone/x6/pwm_voltage/parameters.c

@@ -0,0 +1,43 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * Control PWM output voltage
+ *
+ * @value 0 3.3V
+ * @value 1 5.0V
+ *
+ * @reboot_required true
+ * @group PWM Outputs
+ */
+PARAM_DEFINE_INT32(PWM_VOLT_SEL, 0);

boards/zeroone/x6/pwm_voltage/pwm_voltage.cpp

@@ -0,0 +1,56 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <inttypes.h>
+#include <stdint.h>
+
+#include <px4_platform_common/getopt.h>
+#include <px4_platform_common/module_params.h>
+
+#include "board_config.h"
+
+extern "C" int pwm_voltage_apply_main(int argc, char *argv[])
+{
+	int32_t pwm_volt_sel = 0;
+
+	param_get(param_find("PWM_VOLT_SEL"), &pwm_volt_sel);
+
+	if (pwm_volt_sel != 0) {
+		PWM_5V_VOLT_SEL(true);
+
+	} else {
+		PWM_5V_VOLT_SEL(false);
+	}
+
+	return 0;
+}

boards/zeroone/x6/src/board_config.h

@@ -215,10 +215,11 @@
 #define GPIO_HW_VER_SENSE      /* PH3 */  GPIO_ADC3_INP14
 #define HW_INFO_INIT_PREFIX    "ZeroOneX6"
 
-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2
+#define BOARD_NUM_SPI_CFG_HW_VERSIONS 3
 //                 Base/FMUM
-#define ZeroOneX6_0     HW_FMUM_ID(0x0)   // ZeroOneX6,     Sensor Set  Rev 0
-#define ZeroOneX6_1     HW_FMUM_ID(0x1)   // ZeroOneX6,     Sensor Set  Rev 1
+#define ZeroOneX6_0     HW_FMUM_ID(0x0)   // ZeroOneX6,
+#define ZeroOneX6_1     HW_FMUM_ID(0x1)   // ZeroOneX6 Pro,
+#define ZeroOneX6_2     HW_FMUM_ID(0x2)   // reserved
 
 #define UAVCAN_NUM_IFACES_RUNTIME  1
 
@@ -244,6 +245,10 @@
  */
 #define DIRECT_PWM_OUTPUT_CHANNELS   9
 
+/* PWM Power */
+#define GPIO_PWM_VOLT_SEL               /* PD15  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN6)
+#define PWM_5V_VOLT_SEL(on_true)        px4_arch_gpiowrite(GPIO_PWM_VOLT_SEL, (on_true))
+
 /* Power supply control and monitoring GPIOs */
 
 #define GPIO_nPOWER_IN_A                /* PG1  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN1)
@@ -457,7 +462,8 @@
 		GPIO_nSAFETY_SWITCH_LED_OUT_INIT, \
 		GPIO_SAFETY_SWITCH_IN,            \
 		GPIO_PG6,                         \
-		GPIO_nARMED_INIT                  \
+		GPIO_nARMED_INIT,                 \
+		GPIO_PWM_VOLT_SEL                \
 	}
 
 #define BOARD_ENABLE_CONSOLE_BUFFER

boards/zeroone/x6/src/spi.cpp

@@ -47,10 +47,6 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
 			initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin8}, SPI::DRDY{GPIO::PortI, GPIO::Pin7}),
 			initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
 		}, {GPIO::PortE, GPIO::Pin7}),
-		//  initSPIBus(SPI::Bus::SPI4, {
-		//    // no devices
-		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
-		//  }, {GPIO::PortG, GPIO::Pin8}),
 		initSPIBus(SPI::Bus::SPI5, {
 			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
 		}),
@@ -60,21 +56,36 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
 		}),
 	}),
 
-	initSPIFmumID(ZeroOneX6_1, {            // Placeholder
+	initSPIFmumID(ZeroOneX6_1, {            // X6 Pro
 		initSPIBus(SPI::Bus::SPI1, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM45686, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
+			initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
 		}, {GPIO::PortI, GPIO::Pin11}),
 		initSPIBus(SPI::Bus::SPI2, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM45686, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+			initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
 		}, {GPIO::PortF, GPIO::Pin4}),
 		initSPIBus(SPI::Bus::SPI3, {
 			initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin8}, SPI::DRDY{GPIO::PortI, GPIO::Pin7}),
-			initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin4}),
+			initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
+		}, {GPIO::PortE, GPIO::Pin7}),
+		initSPIBus(SPI::Bus::SPI5, {
+			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
+		}),
+		initSPIBusExternal(SPI::Bus::SPI6, {
+			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
+			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
+		}),
+	}),
+
+	initSPIFmumID(ZeroOneX6_2, {             // reserved
+		initSPIBus(SPI::Bus::SPI1, {
+			initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
+		}, {GPIO::PortI, GPIO::Pin11}),
+		initSPIBus(SPI::Bus::SPI2, {
+			initSPIDevice(DRV_IMU_DEVTYPE_SCH16T, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+		}, {GPIO::PortF, GPIO::Pin4}),
+		initSPIBus(SPI::Bus::SPI3, {
+			initSPIDevice(DRV_IMU_DEVTYPE_SCH16T, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
 		}, {GPIO::PortE, GPIO::Pin7}),
-		//  initSPIBus(SPI::Bus::SPI4, {
-		//    // no devices
-		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
-		//  }, {GPIO::PortG, GPIO::Pin8}),
 		initSPIBus(SPI::Bus::SPI5, {
 			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
 		}),

docs/.gitignore

@@ -18,4 +18,4 @@ yarn-error.log
 
 
 # Generated alternative _summary.md
-# **/*/_summary.md
+# **/*/_summary.md

docs/.vitepress/theme/components/Redirect.vue

@@ -16,4 +16,4 @@
             document.location.replace(this.to);
         }
     }
-</script>
+</script>

docs/.vitepress/theme/style.css

@@ -159,4 +159,4 @@
 
  .vp-doc img {
   display: inline; /* block by default set by vitepress */
-}
+}

docs/CNAME

@@ -1 +1 @@
-docs.px4.io
+docs.px4.io

docs/_link_checker_sc/ignore_errors.json

@@ -1011,4 +1011,4 @@
     },
     "hideReason": "intended"
   }
-]
+]

docs/_link_checker_sc/ignorefile.json

@@ -1 +1 @@
-["en/_sidebar.md"]
+["en/_sidebar.md"]

docs/assets/airframes/types/Airship.svg

@@ -219,4 +219,4 @@
      d="M 113.51898,180.06889 V 245.764 l 2.6517,-0.0192 v -65.67586 z"
      id="path4768"
      inkscape:connector-curvature="0"
-     sodipodi:nodetypes="ccccc" /></svg>
+     sodipodi:nodetypes="ccccc" /></svg>

docs/assets/airframes/types/Autogyro.svg

@@ -141,4 +141,4 @@
    style="opacity:1;fill:#4ec3e8;fill-opacity:1;stroke:none;stroke-width:0.11511399;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
    d=""
    id="path969"
-   inkscape:connector-curvature="0" /></svg>
+   inkscape:connector-curvature="0" /></svg>

docs/assets/airframes/types/Balloon.svg

@@ -81,4 +81,4 @@
      d="m 54.341679,213.74572 c 2.37161,-3.60386 6.9481,-8.19494 7.64935,-9.88687 0.74741,1.64004 4.52647,6.50033 6.82427,9.88687"
      id="path848"
      inkscape:connector-curvature="0"
-     sodipodi:nodetypes="ccc" /></svg>
+     sodipodi:nodetypes="ccc" /></svg>

docs/assets/airframes/types/DodecaRotorXCoaxial.svg

@@ -768,4 +768,4 @@
      id="text7995"><path
        d="m 13.413827,163.09012 q 0.266666,-8.16667 7.8,-8.2 4.033334,0 6.166667,2.66666 1.400001,1.83334 1.400001,4.26667 -0.03333,4.4 -5.000001,7.13334 l -3.333333,1.8 q -3.100001,1.66666 -3.900001,3.53333 -0.266666,0.6 -0.366666,1.33333 h 12.433334 v 2.9 H 12.880493 q 0.233334,-4.26666 1.900001,-6.5 1.433333,-1.86666 4.733333,-3.73333 l 3.066667,-1.73333 q 3.166667,-1.86667 3.2,-4.66667 0,-2.4 -2,-3.7 -1.166667,-0.73334 -2.666667,-0.73334 -4.366667,0 -4.766667,5.43334 0,0.1 0,0.2 z"
        style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:33.33333588px;font-family:FreeSans;-inkscape-font-specification:FreeSans;fill:#ffffff;fill-opacity:1"
-       id="path4482" /></g></svg>
+       id="path4482" /></g></svg>

docs/assets/airframes/types/Helicopter.svg

@@ -142,4 +142,4 @@
      id="text7999"><path
        d="m 81.956066,73.258968 h -8.31978 v -3.33851 q 5.405207,-0.688899 6.994974,-1.90772 1.589767,-1.165829 2.702603,-4.928277 0.105985,-0.317953 0.211969,-0.635907 h 3.073549 v 37.571486 h -4.663315 z"
        style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:52.99222565px;font-family:FreeSans;-inkscape-font-specification:FreeSans;fill:#ffffff;fill-opacity:1;stroke-width:1.58976662px"
-       id="path10409" /></g></svg>
+       id="path10409" /></g></svg>

docs/assets/airframes/types/HexaRotorPlus.svg

@@ -437,4 +437,4 @@
      id="text14502"><path
        d="m 168.38719,13.98896 h -5.23333 v -2.100001 q 3.4,-0.433333 4.4,-1.2 1,-0.733333 1.7,-3.0999999 0.0667,-0.2 0.13333,-0.4 h 1.93334 V 30.822294 h -2.93334 z"
        style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:33.33333588px;font-family:FreeSans;-inkscape-font-specification:FreeSans;fill:#ffffff;fill-opacity:1"
-       id="path19510" /></g></svg>
+       id="path19510" /></g></svg>

docs/assets/airframes/types/HexaRotorX.svg

@@ -437,4 +437,4 @@
      id="text7995"><path
        d="m 13.412346,163.07466 q 0.266666,-8.16667 7.8,-8.2 4.033334,0 6.166667,2.66667 1.400001,1.83333 1.400001,4.26666 -0.03333,4.4 -5.000001,7.13334 l -3.333333,1.8 q -3.100001,1.66667 -3.900001,3.53333 -0.266666,0.6 -0.366666,1.33334 h 12.433334 v 2.9 H 12.879012 q 0.233334,-4.26667 1.9,-6.5 1.433334,-1.86667 4.733334,-3.73334 l 3.066667,-1.73333 q 3.166667,-1.86667 3.2,-4.66667 0,-2.4 -2,-3.7 -1.166667,-0.73333 -2.666667,-0.73333 -4.366667,0 -4.766667,5.43333 0,0.1 0,0.2 z"
        style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:33.33333588px;font-family:FreeSans;-inkscape-font-specification:FreeSans;fill:#ffffff;fill-opacity:1"
-       id="path21558" /></g></svg>
+       id="path21558" /></g></svg>

docs/assets/airframes/types/OctoRotorPlus.svg

@@ -517,4 +517,4 @@
      id="text23152"><path
        d="m 314.42237,352.32882 h -9.96667 v -3.1 l 10.73334,-14.86667 h 2.16666 v 15.33333 h 3.5 v 2.63334 h -3.5 v 5.66666 h -2.93333 z m 0,-2.63334 v -10.33333 l -7.4,10.33333 z"
        style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:33.33333588px;font-family:FreeSans;-inkscape-font-specification:FreeSans;fill:#ffffff;fill-opacity:1"
-       id="path23179" /></g></svg>
+       id="path23179" /></g></svg>

docs/assets/airframes/types/OctoRotorX.svg

@@ -587,4 +587,4 @@
      id="text26711"><path
        d="m 340.12534,283.78889 q 4.03334,1.96667 4.06667,5.90001 0,3.73333 -2.86667,5.76666 -2.1,1.53334 -5.06666,1.53334 -4.13334,0 -6.36667,-2.73334 -1.56667,-1.93333 -1.56667,-4.6 0.0333,-3.93333 4.03334,-5.86667 -2.4,-1.5 -2.93334,-3.1 -0.26666,-0.76666 -0.26666,-1.8 0,-3.3 2.7,-5.06666 1.86666,-1.23334 4.4,-1.23334 3.86666,0 5.83333,2.53334 1.26667,1.63333 1.26667,3.76666 0,2.26667 -1.5,3.63334 -0.66667,0.63333 -1.73334,1.26666 z m -3.86666,-8.6 q -2.7,0 -3.7,1.96667 -0.4,0.8 -0.4,1.76667 0,2.33333 2.03333,3.26666 0.93333,0.43334 2.06667,0.43334 2.66666,0 3.66666,-1.9 0.43334,-0.8 0.43334,-1.76667 0,-2.5 -2.16667,-3.4 -0.86667,-0.36667 -1.93333,-0.36667 z m 0,9.9 q -2.96667,0 -4.26667,2.13334 -0.66667,1.1 -0.66667,2.5 0,2.73333 2.2,4 1.16667,0.66667 2.66667,0.66667 3.03333,0 4.33333,-2.16667 0.66667,-1.1 0.66667,-2.5 0,-2.73334 -2.23333,-4 -1.2,-0.63334 -2.7,-0.63334 z"
        style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:33.33333588px;font-family:FreeSans;-inkscape-font-specification:FreeSans;fill:#ffffff;fill-opacity:1"
-       id="path26744" /></g></svg>
+       id="path26744" /></g></svg>