fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
48,492 Commits 852 Branches 161 Tags
Commit Graph

48492 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Nick
dbb00d500f Update src/modules/commander/failure_detector/FailureDetector.cpp 
Prevent Buffer overflow
 2026-02-09 18:08:26 +01:00
Matthias Grob
61a8ae80a6 FailureDetector: implement upper and lower current limit with offset 2026-02-09 18:08:26 +01:00
Matthias Grob
f8329ff80d FailureDetector: rework motor status check 2026-02-09 18:08:26 +01:00
Matthias Grob
b4b1b44c6a FailureDetector: consistent timestamp naming 2026-02-09 18:08:26 +01:00
Matthias Grob
f5a56ae42f escCheck: rework online check to properly report offline ESCs 
previous to this
09d79b221f274523349a029e63ab4462e41d0c1c
set `esc_online_flags` e.g. for UAVCAN ESCs which specific one is online and that then got compared to a mask where the first `esc_count` bits were set.

So if only ESC 5 is mapped and online you get the message "ESC 156 offline" because `esc_online_flags = 0b1000` gets compared to `online_bitmask = 0b1` based on `esc_count = 1` and the motor index is `esc[0].actuator_function = 0` wrapped using `0 - actuator_motors_s::ACTUATOR_FUNCTION_MOTOR1 + 1 = 156`.
 2026-02-09 18:08:26 +01:00
Marco Hauswirth
c4535683a7 ekf2 unit-tests: adapt to strict GNSS checks on ground 2026-02-09 10:59:58 +01:00
Matthias Grob
f9cdd095b8 gnss_checks: always run strict checks on ground 
With the goal to never take off if the GNSS solution is not fullfilling the configured requirements still not stopping to use it in case it degrades mid air.
 2026-02-09 10:59:58 +01:00
Matthias Grob
61c990c5ee estimator_interface: remove unused getter 2026-02-09 10:59:58 +01:00
Beat Küng
8115cf2597 docs: update link for px4 ros2 interface lib python api docs 2026-02-09 10:03:55 +01:00
Eric Katzfey
eb43d21730 voxl2_io: Added UART passthru 2026-02-08 20:51:31 -07:00
Eric Katzfey
5e54d727fc voxl_esc: Limit frequency of UART passthru writes to 20Hz 2026-02-08 20:51:31 -07:00
Andrew Brahim
ecb222c7e7
uavcannode: implement hardpoint commands (#26334) 
* implement cannode hardpoint commands

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

* Update src/drivers/uavcannode/Subscribers/HardpointCommand.hpp

Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>

* Update src/drivers/uavcannode/Subscribers/HardpointCommand.hpp

Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>

* add hardpoint sub to ark cannode, simplify handling of hardpoint broadcast

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

---------

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
 2026-02-08 18:36:11 -09:00
Aaron1356
a5a7dd802c
[Feature] Adding I2C driver for the GRF250 and GRF500 models (#26425) 
* Adding the GRF I2C driver

* I2C Driver Working

* Removing a lot of unnecessary code

* fixing names

* Changing the i2c Driver to be in the lightware laser

* remove the old driver

* formatting fix

* Adding Ligthware GRF to documentation
 2026-02-06 15:26:13 -05:00
Silvan
7b72335876 UI: remove isAdvanced=false for Altitude Cruise 
Signed-off-by: Silvan <silvan@auterion.com>
 2026-02-06 18:13:36 +01:00
Beat Küng
446895fdc0 Revert "failsafe: prevent Hold when no action is taken (#26383)" 
This reverts commit 40dc011d82f5b79c11718992200e60c8534929ca.

Not needed anymore
 2026-02-06 13:00:08 +01:00
Beat Küng
3eb0255922 fix commander: do not trigger Hold (delay) when failsafe action is Warn 
The new unit test failed before and passes with the fix.
 2026-02-06 13:00:08 +01:00
Hamish Willee
271d3f01a3
Update mavlink/mavlink to latest[A (#26410) 2026-02-06 08:17:44 +13:00
Hamish Willee
e8fca6e991
uORB docs parser (#24977) 2026-02-05 17:58:45 +11:00
Beniamino Pozzan
de1314f995
docs: fix badge for UXRCE_DDS_FLCTRL (#26375) 
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@gmail.com>
 2026-02-04 09:40:32 +11:00
Julian Oes
1bfc0da258
[Sponsored by CubePilot] Get CI to pass all boards (#26402) 
* kakutef7: try to save more flash
 2026-02-03 16:46:36 -05:00
ch3at
41966774c2
docs: fix incorrect links in config/safety.md (#26355) 
Fixed incorrect links to Acro mode
 2026-02-03 20:38:43 +00:00
Jacob Dahl
82e3322e0c
vtxtable: fix KConfig type from string to bool (#26359) 2026-02-03 13:14:47 +13:00
PX4 Build Bot
e2e89def7e
New Crowdin translations - zh-CN (#26398) 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
 2026-02-02 08:19:45 +11:00
PX4 Build Bot
d5c4ace615
New Crowdin translations - uk (#26397) 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
 2026-02-02 08:19:19 +11:00
Levi Todes
390c9d6ccf
SHT3X driver: change state timer variable from uint32 to uint64. (#24264) 
Prevents current behaviour of repeated entry into 'init' state
and associated log spamming after +-72 minutes.

Signed-off-by: LeTo37 <levitodes2019@u.northwestern.edu>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
 2026-01-31 17:57:39 -09:00
Jacob Dahl
63c4f4ac3e
uavcannode: publisher: Fix2: fix eph/epv off by sqrt bug (#26389) 2026-01-30 10:31:38 -07:00
Nick
40dc011d82
failsafe: prevent Hold when no action is taken (#26383) 2026-01-30 14:09:56 +01:00
Pernilla
8d97013822 Mavlink: increase stream rate of GIMBAL_DEVICE_ATTITUDE_STATUS 2026-01-30 13:06:58 +01:00
mahima-yoga
4e59a060a8 HomePosition: only set home position using GNSS if bit 0 in EKF2_GPS_CTRL is active 
If the vehicle position is not set by GNSS, then the home position should not be either.
 2026-01-30 11:20:34 +01:00
tompsontan
f8c1e8b81f
Improve QMC5883P magnetometer stability by optimizing OSR and ODR settings. (#26350) 2026-01-29 19:38:20 -09:00
Nick
6be1a14e06
docs: COM_FLTT_LOW_ACT default fixed (#26374) 2026-01-29 15:21:45 -09:00
Julian Oes
3075724f9e
jmavsim: update submodule (#26369) 
This contains:
https://github.com/PX4/jMAVSim/pull/140

which updates dependencies and adds macOS arm64 support.
 2026-01-30 10:19:38 +13:00
Eric Katzfey
e37a216393
QURT/SERIAL: Undo the breaking changes from commit 17f3db9231350caf86d9f0af6591f66044d9829c. (#26382) 
A check was added for a non-existant parameter. This commit removes those.
 2026-01-29 12:03:18 -09:00
Eric Katzfey
90fec17427
CRSF_RC: Replace strlcpy with strncpy and null termination. strlcpy is a BSD extension and is not part of standard C/C++. (#26381) 
It's typically not available in glibc's <string.h>.
 2026-01-29 12:02:36 -09:00
ttechnick
03264ce1a7 failsafe: prevent switch offboard -->pos without RC 2026-01-29 18:21:00 +01:00
Daniel Honies
ac4f419b50 Update 4004_gz_standard_vtol 
VT_F_TRANS_THR at 0.3 always triggers front transition timeout as the vehicle does not accaelerate quickly enough. With the param set to 1.0 it works.
 2026-01-29 18:07:32 +01:00
Phil-Engljaehringer
193a4478ed fix: adjusted probe function to new revision of TLA2528 (and add status function) 2026-01-29 18:04:25 +01:00
Phil-Engljaehringer
744548e9f2 fix: use correct address passed with -a flag 2026-01-29 18:03:04 +01:00
Beat Küng
b9bd820186 docs: mention python bindings in ros lib 2026-01-29 08:20:03 +01:00
Beat Küng
e0f1022681 ci: ignore python packages in px4-ros2-interface-lib 
Due to build issues with very old ROS version
 2026-01-29 08:20:03 +01:00
Hamish Willee
4c184f309c
docs: Max code line length 140 chars (#26368) 2026-01-29 13:43:22 +11:00
Sindre Meyer Hegre
adf1bab518
docs: add link to masther thesis for mc_nn_control (#26279) 2026-01-29 13:10:21 +11:00
Claudio Chies
f5c5f2ed8c
Update FLARM link to the correct product page (#26361) 
* Update FLARM link to the correct product page

* Update docs/en/peripherals/adsb_flarm.md

---------

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
 2026-01-29 12:48:30 +11:00
Julian Oes
09d3f05bcd
gazebo-classic: update for CI test fixes (#26335) 
The fix:
https://github.com/PX4/PX4-SITL_gazebo-classic/pull/1084
seems to help with test failures locally.
 2026-01-29 06:05:55 +13:00
Loic Fernau
b7d9876cd9
Added missing Defaults to VEHICLE_CMD_DO_SET_MODE (#26291) 
* Added missing Defaults to VEHICLE_CMD_DO_SET_MODE

* Made Format
 2026-01-29 05:36:21 +13:00
Julian Oes
bd6b0699cc Fetch metadata files from master not main 
For flash constrained builds, the component metadata files are
downloaded directly from s3. For the main branch, these files are
currently still uploaded to master. Therefore, we also need to reference
master and not main.

This fixes the actuators tab in QQC for KakuteH743-Wing which is one of
the boards that did not exist in source when we briefly uploaded to main
before reverting back to master, presumably for QGC compatibility.
 2026-01-28 09:43:28 +01:00
Jonas Eschmann
684ba28fbf
Update iframe source to fix mixed content warning (#26309) 2026-01-28 17:54:35 +11:00
Hamish Willee
1797ce4e88
Fix round trip hello_sky translation (#26360) 2026-01-28 16:59:40 +11:00
PX4 Build Bot
05517935dc
New Crowdin translations - ko (#26246) 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
 2026-01-28 16:43:34 +11:00
PX4 Build Bot
4af33cef43
New Crowdin translations - uk (#26247) 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
 2026-01-28 16:43:23 +11:00