fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
35,113 Commits 852 Branches 161 Tags
Commit Graph

2321 Commits

Author SHA1 Message Date
斯东Stone
e789124bd9 Remove duplicated line in 50003_aion_robotics_r1_rover 2021-04-01 09:36:20 -04:00
Chris Lovett
292a66ce41
Add support for simulators running on a different host than the PX4 instance 2021-03-31 20:56:38 -04:00
Beat Küng
9dd6bef7f9 autostart scripts: remove SYS_PARAM_VER 
With the airframe defaults there's no use for that anymore
 2021-03-31 20:12:05 -04:00
Bastian Jäger
752bc9ebce
startup scripts: fix rc.mavlink_override 2021-03-31 14:05:24 +02:00
TSC21
eca4d90a91 init.d-posix: adjust COM_OBC_LOSS_T when using PX4_SIM_SPEED_FACTOR 2021-03-31 13:25:01 +02:00
Daniel Agar
3d667b1675
delete unused drivers/lights/blinkm 2021-03-28 19:21:29 -04:00
Daniel Agar
631d1647d3 boards: minimize unnecessary differences in default variants 2021-03-28 14:46:47 -04:00
Silvan Fuhrer
3983f0b833
ROMFS: add new VTOL config and mixer (generic quadplane tiltrotor VTOL) 2021-03-23 19:55:19 -04:00
Julian Oes
2ab276f5ca ROMFS: disable MAVLink broadcast by default 
I don't think we should be broadcasting by default as we haven't done
that in the past. This suddenly spams the network with a lot of
messages, and leads to confusing situations in offices where there are
multiple PX4 SITL and QGC intances are open.
 2021-03-23 12:54:46 -04:00
Daniel Agar
7c2b945c21 ROMFS: posix rcS add gyro_fft and gyro_calibration start 2021-03-18 10:04:04 +01:00
Daniel Agar
1429423876 gyro_fft: support sensor_gyro (non-fifo) 2021-03-18 10:04:04 +01:00
Lorenz Meier
d35ce21594 PWM out: Ensure correct loading on single-bank targets 2021-03-17 22:03:18 +01:00
Lorenz Meier
935cc05c47 FMU PWM OUT: Start driver in interface 2021-03-17 22:03:18 +01:00
Lorenz Meier
0efa7556fe VTOL airframe: Remove spurious tab 2021-03-17 22:03:18 +01:00
Lorenz Meier
595b3a05fb Draco airframe: Remove tabs 2021-03-17 22:03:18 +01:00
Lorenz Meier
4af42be3f3 IFO-S airframe: Remove tabs 2021-03-17 22:03:18 +01:00
Lorenz Meier
e887aa902f IFO airframe: Remove tabs 2021-03-17 22:03:18 +01:00
Lorenz Meier
06f7c49d3a Baby-shark airframe: Remove spurious tabs 2021-03-17 22:03:18 +01:00
Lorenz Meier
c904767f1d Always start airspeed 
This ensures we get readings in the log and in the telemetry even if the sensor is disabled.
 2021-03-17 22:03:18 +01:00
Lorenz Meier
891b231215 Ensure that AUX mixer is loaded when 2nd bank is present 2021-03-17 22:03:18 +01:00
Lorenz Meier
38f306908d Remove PWM14 VTOL airframe 2021-03-17 22:03:18 +01:00
Daniel Agar
e7722b11eb pwm_out multi-instance support 
PX4 uses banks of 8 outputs as a logical structure. Boards that have
more outputs than 8 get multiple instances. This is an arbitrary choice
that helps with overall structure and enables the mixing of different
device classes (like FMU, IO or UAVCAN).
 2021-03-17 22:03:18 +01:00
Daniel Agar
2257c3767e simple gyro auto calibration module 2021-03-15 09:46:47 +01:00
David Jablonski
02abb760a3 SITL: add iris with fog-simulating lidar 2021-03-11 00:39:09 +01:00
Daniel Agar
f8eaa6e46b ROMFS handle bl_update generically 
- include all available legacy bootloaders
 2021-03-11 00:38:18 +01:00
Jaeyoung-Lim
1d66b033a4 Append mixer with aux outputs 2021-03-10 07:15:53 +01:00
Jaeyoung-Lim
0db29866f1 Add standard_vtol drop 2021-03-10 07:15:53 +01:00
Daniel Agar
4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Kevin Dominic Merkel
d5e468a19e
change typhoon_h480 roll-/pitchrate P gain to reduce oscillations (#17044) 2021-03-07 18:18:00 +01:00
Nicolas MARTIN
66beffa2f3 Enable pre-arm checks in HIL modes 
by airframe parameters HIL mode will still disable:
 - usb check
 - power checks
 - safety switch
 2021-03-05 21:23:31 +01:00
Gonçalo Atanásio
9f6c882d2a
boards: crazyflie v2.1 Default to EKF2 with no MAG 
Co-authored-by: TheLegendaryJedi <goncalo.atanasio@gmail.com>
 2021-03-04 19:30:17 -05:00
Daniel Agar
c9a2d0ed34 IMU_GYRO_RATEMAX set system default to 400 Hz 
- MC default is still 800 Hz
 2021-03-02 10:08:49 -05:00
Daniel Agar
fd1fff89d4 dataman: remove flash backend 2021-02-26 00:28:48 +01:00
Daniel Agar
ac5167b459 init.d-posix: delete rc.mavlink_override 2021-02-25 13:44:19 -08:00
garfieldG
8db37225d6 Added rc.mavlink_override to test the new parameters with sitl 2021-02-25 08:52:38 -08:00
garfieldG
3cd9b3c2cf Added support in Mavlink Ethernet channel parameters 
Mavlink Ethernet channel settings such as udp port, remote port and broadcast mode now can be changed dynamically via parameters.
 2021-02-25 08:52:38 -08:00
Beat Küng
3fa825bf88 boards: remove intel/aerofc-v1 
it's discontinued
 2021-02-25 09:28:37 -05:00
Beat Küng
7e33d03470 drivers: remove tap_esc 
- it's not used anymore
- it would need a refactoring to use mixer_module
 2021-02-25 09:28:37 -05:00
Beat Küng
8986264feb airframes: remove aerofc as it's discontinued 2021-02-25 09:28:37 -05:00
JacobCrabill
35f822fca6 uavcan_v1: Working ESC setpoint pub/sub 2021-02-24 19:22:11 +01:00
David Sidrane
dd3c3098f2 nxp_ucans32k146:Add Can Bootloader build 
nxp_ucans32k146:Relocation for Bootloader

nxp_ucans32k146:can_boot enable CAN

nxp_ucans32k146:Save Space use Non Optimize memcpy

nxp_ucans32k146:Increase to 24K

nxp/ucans32k146:Canbootloader LED Driver

nxp_ucans32k146:Can bootloader shut down CAN

nxp_ucans32k146:Use NVMEEPROM for Paramaters

nxp_ucans32k146:Use bootloader AppDescriptor

px4 mtd:Support onchip emulated eeprom
 2021-02-24 19:20:15 +01:00
Lorenz Meier
aacbc04730 PX4IO: Robustify upgrade process 
These changes remove the two code paths to updates (forceupdate and update) and try to reboot and bootload IO independent of its state, wether it is in bootloader mode already, safety switch is off or if it is in "nominal state" (running and safety on). This ensures that there are no conditions where user error or boot sequence can prevent a successful upgrade. The only state where an upgrade will not be done is if the system is fully armed.
 2021-02-21 19:56:16 -05:00
David Sidrane
e0e796a2b9 ROMFS:Bake in UAVCAN FW with builds that end in _uavcan 
The configuration are mostly for testing now.
 2021-02-17 22:47:35 -05:00
Julian Oes
fecd96dc28 ROMFS: add remote port for gimbal mavlink instance 
Previously, we did not set a remote port which meant that the default
remote port 14550 was used. This meant that the mavlink instance
talking to the gimbal was interfering with the connection to the ground
station (on 14550).
 2021-02-17 13:54:34 -05:00
Julian Oes
6f56797f3d mavlink: hack to forward messages from gimbal 
This is a hack to make sure the messages from the gimbal arrive at other
links (e.g. the ground station). It means that the gimbal does not get
flooded with all other messages that would get forwarded but messages
from the gimbal will still make it through.
 2021-02-17 13:54:34 -05:00
Julian Oes
b8ad7092dc mavlink: use Mavlink 2 by default 2021-02-17 13:54:34 -05:00
Julian Oes
8da3a490af ROMFS: use gimbal v2 protocol with typhoon_h480 2021-02-17 13:54:34 -05:00
Julian Oes
642adbead8 if750a: use MAVLink gimbal v2 device 2021-02-17 13:54:34 -05:00
Julian Oes
e6b1775bb6 vmount/navigator/mavlink: gimbal v2 changes 
This is a collection of commits all having to do with changes in the
Mavlink gimbal v2 protocol as described in:
https://mavlink.io/en/services/gimbal_v2.html
 2021-02-17 13:54:34 -05:00
Julian Oes
422bac4bfd mavlink: add gimbal mode to talk to gimbal device 2021-02-17 13:54:34 -05:00