Julien Lecoeur
abcb920df4
Fix -Werror=implicit-fallthrough on arm-none-eabi-gcc 7.1.0
...
BMP280: fix -Werror=implicit-fallthrough on arm-none-eabi-gcc 7
gnss: fix -Werror=implicit-fallthrough on arm-none-eabi-gcc 7
fmu: fix -Werror=implicit-fallthrough on arm-none-eabi-gcc 7
timer.c: fix -Werror=implicit-fallthrough on arm-none-eabi-gcc 7
px4cannode_led: fix -Werror=implicit-fallthrough on arm-none-eabi-gcc 7
Fix -Werror=implicit-fallthrough on gcc7
2017-07-18 08:24:37 +02:00
David Sidrane
bf570dee2f
Added use of SPI_LOCK in the ms5611 driver on any HW where the
...
PX4_SPI_BUS_BARO == PX4_SPI_BUS_RAMTRON
2017-05-03 08:17:12 +02:00
Lucas De Marchi
2805bffe52
ms5611: reduce macro scope
...
Move the addresses to .cpp where they are used. This should help
noticing discrepancies like the OSR we are using and the sampling
interval.
2017-04-06 12:18:30 +02:00
Lucas De Marchi
47d4c75214
ms5611: poll sensor at 100Hz
2017-04-06 12:18:30 +02:00
Beat Küng
546bd2b4d0
drivers: remove the overflow perf counter
...
This was used together with the read() interface, but we don't use that
so the counters are wrong.
2017-03-20 09:11:34 +01:00
Lucas De Marchi
62ea471ae7
ms5611: support MS5611/MS5607 autodetection
...
From their registers it's not possible to differentiate MS5611 from
MS5607. Here we use a little heuristic that people won't likely be
flying (or starting to fly) on very high altitude, greater than 5300m.
Even on these altitudes the error would be much lower using the MS5611
calculations for MS5607 than it is on MSL.
2017-02-09 21:30:19 +01:00
Lorenz Meier
d0d1a8e04f
MS5611: Add missing bus identifier
2017-01-29 16:24:47 +01:00
Lorenz Meier
7326fea142
Driver compile fixes
2017-01-19 19:24:52 +01:00
Lorenz Meier
171c321acc
MS5611: Fix device ID
2017-01-19 19:24:52 +01:00
Paul Riseborough
5e53a5425a
drivers: Populate baro device ID
...
TODO - use unique HW ID
2017-01-19 19:24:52 +01:00
Lorenz Meier
6820eb7a0c
MS5611: Less chatty boot
2016-12-12 16:11:21 +01:00
David Sidrane
bdfb2bbb8d
Fixed hardfault on fast proc
...
_baro_topic can be null in init sequence
init call collect before the topic is inited.
I think this pattern is repeated in other drivers. I would suggest
allowing null in orb_publish to just return.
2016-10-22 11:43:22 +02:00
Beat Küng
241fd629ce
ERROR macro: get rid of the many 'oddly, ERROR is not defined for c++', use PX4_ERROR
2016-09-30 13:50:51 +02:00
Julian Oes
8ff237c69f
Remove size optimization for individual modules
...
It makes more sense to set the optimization flags on a platform basis
instead of individually for each module. This allows for different
optimization options for SITL, NuttX, Snapdragon, etc.
2016-09-30 08:11:51 +02:00
Lorenz Meier
c835fb36a6
5611: Bump sampling frequency back up to 40 Hz from 25 Hz to help with altitude estimation
2016-07-31 12:20:48 +02:00
Beat Küng
0fa3bd4691
ms5611: use px4_getopt instead of getopt
...
- px4_getopt is threadsafe
- getopt does not do argument reordering (ms5611 start -T 5607 did not work)
2016-07-29 14:50:03 +02:00
David Sidrane
1b0f41e36e
Added support to MS5611 Driver for MS5607
2016-07-29 14:50:03 +02:00
Lorenz Meier
286efb6b34
Remove POOSIX porting noise from ms5611 driver ( #4896 )
2016-06-24 10:39:55 +02:00
Lorenz Meier
7398164fcc
Updated PX4 use / API of low level GPIO and other hardware-centric system facilities
2016-05-28 14:56:17 +02:00
Lorenz Meier
2c6a8c0ce6
MS5611: Drop readout rate to 25 Hz to alleviate self-heating.
2016-05-22 15:21:56 +02:00
Daniel Agar
1ecdb0f6fb
adjust stack sizes
2016-05-19 21:49:34 +02:00
jaxxzer
d8aee84625
ms5611: Fix to start drivers for all devices present at boot.
2016-04-17 19:07:30 +02:00
Andrew Tridgell
efd4552e37
ms5611: reduced OSR to 1024
...
this reduces self-heating of the sensor which reduces the amount of
altitude change when warming up. Apparently some individual sensors
are severely affected by this.
Unfortunately it raises the noise level, but Paul is confident it
won't be a significant issue
2016-04-17 16:04:44 +02:00
Lorenz Meier
96fd15f42e
MS5611: Use shorter perf names
2016-03-28 13:04:10 +02:00
Lorenz Meier
b37082e390
MS5611: Run SPI bus faster
2016-01-23 13:32:42 +01:00
Lorenz Meier
1474ddbb78
MS5611: Ensure to set the lockmode at the right location
2016-01-23 13:23:32 +01:00
Lorenz Meier
871b4b482e
Do not enable new bus sync yet
2016-01-22 18:07:27 +01:00
Lorenz Meier
c659d7851f
MS5611: Use the right locking mechanism on Pixracer
2016-01-22 17:12:13 +01:00
Lorenz Meier
415e42f5de
MS5611: Use baro SPI device
2016-01-15 22:44:22 +01:00
Mark Whitehorn
ecbcfe838b
clean up, change SPI2 clock back to 12MHz and remove debug prints
2016-01-14 17:55:54 +01:00
Mark Whitehorn
4952d05652
debugging ms5611 on spi2
2016-01-14 17:55:54 +01:00
Stefan
5c1b84f16a
Update ms5611_i2c.cpp
...
spelling mistakes
2016-01-11 08:37:43 +01:00
Lorenz Meier
67087c6428
MS5611: Fix breakage introduced by failed Qualcomm MS5611 port
2015-10-11 15:43:45 +02:00
Lorenz Meier
0490046af4
MS5611: Increase the requirements about the PROM contents and CRC.
2015-10-06 17:22:38 +02:00
Lorenz Meier
fa5071b3c5
Remove module.mk files to prevent confusion of adopters upgrading
2015-10-06 11:23:20 +02:00
Lorenz Meier
6ef94e0dfb
Merged master into cmake-2
2015-09-20 10:33:39 +02:00
Lorenz Meier
b067a0c094
Merge branch 'ekf_voting_priority'
2015-09-19 10:51:01 +02:00
James Goppert
676a3d230c
Work on px4io firmware building.
2015-09-13 23:20:00 -04:00
James Goppert
e55af00222
Removed weak attributes.
2015-09-13 14:40:27 -04:00
James Goppert
1d6b31d196
Switch to cmake build system.
2015-09-07 20:37:45 -04:00
Lorenz Meier
ebfae73108
MS5611 code style fix
2015-09-05 22:06:15 +02:00
Lorenz Meier
299ccab3ae
MS5611: Fix build error
2015-08-30 11:37:26 +02:00
Simon Wilks
384047787a
Fix travis/clang report of overloaded virtual functions.
2015-08-18 23:01:52 +02:00
Simon Wilks
4eef65f313
Enable ms5611 driver and fix build errors.
2015-08-18 23:01:52 +02:00
Mark Charlebois
a589d15c52
Refactored debug() and log() in CDev
...
These functions used vprintf which is not available on all platforms.
They also do not enable line and file debug output.
Changed to macros that preserve the output format. Uses new macro that
can be used to implement per object, runtime selectable logging
Signed-off-by: Mark Charlebois <charlebm@gmail.com >
2015-08-11 12:07:06 -07:00
Lorenz Meier
d19de58102
Merge branch 'master' of github.com:PX4/Firmware into master_release
2015-06-27 11:54:17 -07:00
Andrew Tridgell
5e27b7bc31
ms5611: fixed the i2c device on NuttX. This was left-over debugging noise from the POSIX bringup.
2015-06-27 15:11:03 +02:00
Lorenz Meier
454becdae5
Merged release_v1.0.0 branch into master
2015-06-25 21:45:17 +02:00
Lorenz Meier
73d179fb59
MS5611 driver: Fix reeset logic via I2C, minor code style fixes. Fixes #2007 , identified by Kirill-ka
2015-06-15 17:28:26 +02:00
Mark Charlebois
1ca05aaa64
orb_advert_t changed to void * and checks changed to nullptr
...
The existing orb_advert_t use thoughout the code sometimes tries
to treat it as a file descriptor and there are checks for < 0
and ::close calls on orb_advert_t types which is an invalid use
of an object pointer, which is what orb_advert_t really is.
Initially I had changed the -1 initializations to 0 but it was
suggested that this should be nullptr. That was a good recommendation
but the definition of orb_advert_t had to change to void * because
you cannot initialize a uintptr_t as nullptr.
Signed-off-by: Mark Charlebois <charlebm@gmail.com >
2015-05-27 14:42:49 -07:00