30177 Commits

Author SHA1 Message Date
Daniel Agar
c13835c0f0 replay module split replay_main.cpp into separate compilation units 2019-09-17 14:33:04 +02:00
Matthias Grob
270e12a4df VelocitySmoothing: refactor local scope t variables instead of array 2019-09-17 09:27:00 +02:00
bresch
da8ac8cafb VelocitySmoothing - Clean up updateTraj function based on Matthias' comments 2019-09-17 09:27:00 +02:00
bresch
b82fa68893 VelocitySmoothingTest - Fix typo and use "zero" instead of "null" 2019-09-17 09:27:00 +02:00
bresch
42cedb7fda VelocitySmoothing - Change direction of "brake" as braking means that
only the T3 part is required and that the jerk applied during T3 is the
opposite of the one defined by "_direction".
2019-09-17 09:27:00 +02:00
bresch
8490266be8 VelocitySmoothing - (Re)set _state_init every time _state is (re)set 2019-09-17 09:27:00 +02:00
bresch
654938f6a1 VelocitySmoothing - Cosmetic changes (new lines, reorganize functions),
regroup both updateTraj functions and edit some comments
2019-09-17 09:27:00 +02:00
bresch
0b765a1642 AltitudeSmoothVel - Update to use new implementation of VelocitySmoothing
Remove jerk reduction (not needed in the new implementation)
2019-09-17 09:27:00 +02:00
bresch
862454827e VelocitySmoothingTest - Test that the trajectory is always within the constraints 2019-09-17 09:27:00 +02:00
bresch
8cc2a7018e VelocitySmoothing - Re-enable time stretch, integrate dt to get local time.
Also split a few functions into smaller ones for readability, fix
formatting, use geters to get the current state of the trajectory
instead of return arguments.
2019-09-17 09:27:00 +02:00
bresch
c7696488fe VelocitySmoothing - Improve computation of the direction of the trajectory by predicting the velocity at zero acceleration instead of the current velocity
This helps when the current velocity is smaller than the target but that
the acceleration is too large such that the velocity will overshoot.
Without this check, the algorithm increases the acceleration which leads
to an even larger overshoot.
2019-09-17 09:27:00 +02:00
bresch
052932fa95 VelocitySmoothingTest - Update unit test to use the same parameters ordering (time, setpoint) as the VelocitySmoothing class 2019-09-17 09:27:00 +02:00
bresch
c13499e64b test_velocity_smothing - Update test script to use new polynomial evaluation algorithm 2019-09-17 09:27:00 +02:00
bresch
a03cc495ce VelocitySmoothing - Refactor class to use polynomial evaluation instead of numerical integration
This solves many numerical issues when the trajectory is close to the
primary NE axes (small velocities). It is also more robust when dt is
large and has some jitter.
2019-09-17 09:27:00 +02:00
Hamish Willee
0c0b261ff2 ubuntu.sh - remove modemmanager 2019-09-17 00:38:14 -04:00
Daniel Agar
5507f14bb2 Jenkins HIL disable rgbled 2019-09-15 17:17:09 -04:00
Daniel Agar
ed6c7cc806 cmake remove unused/broken _no_optimization_for_target 2019-09-15 17:16:38 -04:00
Daniel Agar
251831f7af cmake px4_add_library remove unused PX4_LIBRARIES property 2019-09-15 17:16:38 -04:00
Daniel Agar
dc46b6a749 cmake px4_add_module MAIN is always present (required) 2019-09-15 17:16:38 -04:00
Daniel Agar
fb7521eb5e cmake px4_base -> px4_parse_function_args 2019-09-15 14:36:38 -04:00
Daniel Agar
d256fb8770 cmake px4_find_python_module move to standalone file 2019-09-15 14:36:38 -04:00
Daniel Agar
d27dfcd921 NuttX CMakeLists.txt extract helpers (jlink, upload, etc) 2019-09-15 14:36:38 -04:00
Daniel Agar
f2189dd045 CMakeLists.txt extract top level helpers (ccache, doxygen, metadata, etc) 2019-09-15 14:36:38 -04:00
Matthias Grob
d4f984fea5 FlightTaskAutoLineSmooth: Fix comment to be style compliant 2019-09-13 18:10:05 +02:00
bresch
47401d1177 AutoLineSmoothVel - Replace min/max absolute constraints with a function named constrainAbs
This function constrain the absolute value of some value but keeps the original sign.
2019-09-13 17:46:01 +02:00
bresch
3c5b24037a AutoLineSmoothVel - Improve virtual pilot logic that provides velocity setpoints to the trajectory generator.
Constrain the generated velocities in the NE inertial frame rather than
just constraining the norm.
2019-09-13 17:46:01 +02:00
bresch
59f54a7fd8 mathlib - Add FLT_EPSILON deadzone in sign computation 2019-09-13 17:46:01 +02:00
mcsauder
410dd85289 Comment out the ll40ls (LidarLite) driver from the fmu-v2 build. 2019-09-13 11:03:13 -04:00
Nico van Duijn
a26865c279 drivers: set CM8JL65 signal_quality invalid beyond bounds 2019-09-13 10:42:10 -04:00
Martina Rivizzigno
78279f6587 Unit tests for Obstacle Avoidance interface (#12816)
* FlighTask: remove legacy definition of empty_trajectory_wapoint

* add unit tests for the ObstacleAvoidance interface
2019-09-12 14:37:31 +02:00
Julian Kent
39451b811a Do syscall for time once, outside of loop 2019-09-11 12:34:59 -04:00
Julian Kent
b27d6a958a Account for the time since range data arrived 2019-09-11 12:34:59 -04:00
Hamish Willee
94ef585f76 Link to missing params docs 2019-09-11 09:17:00 -04:00
Hamish Willee
fd10220a34 Ubuntu.sh: check for requirements.txt 2019-09-11 09:15:44 -04:00
Daniel Agar
6277710fac
Github actions simple cpp build 2019-09-10 17:07:51 -04:00
Daniel Agar
df01eda550 systemcmds/tests: delete obsolete test_sensors 2019-09-10 16:37:33 -04:00
Silvan Fuhrer
702c6f6df4 FW pos C: fix altitude control for VTOL/FW by also publishing attitude sp if in altitude, not only if position or velocity controlled
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2019-09-10 13:20:07 -04:00
Silvan Fuhrer
92b824e218 VTOL attitude controller: run update_vtol_state only if mc or fw att sp changed, such that pusher support in hover works again
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2019-09-10 13:52:33 +02:00
Silvan Fuhrer
1b2403a87f VTOL land detector: trigger land detector in fixed-wing mode if disarmed.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2019-09-10 13:46:43 +02:00
Julian Kent
a8fbe6bba2
Remove references to pow(x,0.5), use sqrt instead (#12928)
* Remove references to pow(x,0.5), use sqrt instead

* Update matrix library
2019-09-10 13:29:39 +02:00
Patrick Servello
47e668eb86 simulator and dumpfile fix minor resource leaks
* Certain conditional branches returned before closing the file handler.
2019-09-09 13:24:07 -04:00
Daniel Agar
a5e6c880fe
Update submodule mavlink v2.0 to latest Mon Sep 9 12:38:36 UTC 2019
- mavlink v2.0 in PX4/Firmware (65db4b70fd76afe122c1aed404de60e978ead294): d5d131cf71
    - mavlink v2.0 current upstream: ac40c0329e
    - Changes: d5d131cf71...ac40c0329e
2019-09-09 12:29:42 -04:00
mcsauder
e4509486e8 Correct a typo and create a #define for the LeddarOne FOV. 2019-09-06 11:59:29 +02:00
mcsauder
aea139bc1b Correct the LeddarOne FOV and deprecate the unneeded _distance_sensor_topic after migrating to PX4RangeFinder. 2019-09-06 11:59:29 +02:00
mcsauder
ddd9a97d42 Modify the LeddarOne driver class to utilize the PX4RangeFinder library. 2019-09-06 11:59:29 +02:00
mcsauder
94d39e4466 Return from LeddarOne::collect() via LeddarOne::measure() and alphabetize #includes. 2019-09-06 11:59:29 +02:00
mcsauder
f31ac44289 Const correctness and fix leddar_one::test(). 2019-09-06 11:59:29 +02:00
mcsauder
c0e8b37d96 Add collect() validation to the LeddarOne::init() method, format whitespace and console output.
Reduce measure/collect timing logic complexity to use ScheduleOnInterval() rather than SchuleDelayed().
2019-09-06 11:59:29 +02:00
mcsauder
04073f2c71 Deprecate the LeddarOne request() and publish() methods to match other distance sensor driver classes and fix perf counter errata. 2019-09-06 11:59:29 +02:00
Tanja Baumann
f3c5ca6015 Collision Prevention: support multiple sensors and frames (#12883)
* build internal sensor map

* Extend testing coverage

* Update matrix library
2019-09-06 08:38:56 +02:00