8d497b58f9
Merge branch 'master' of github.com:PX4/Firmware
2013-09-10 11:53:06 +02:00
c12955fbc0
the "rgbled rgb X X X" command was broken, and would set green when you asked for red, and blue when you asked for green, and never set red. - off by 1 error in parameter numbering.
2013-09-10 13:32:32 +10:00
a7bff9f448
Merge branch 'master' of github.com:PX4/Firmware into fixedwing_l1
2013-09-08 22:27:31 +02:00
98ac914cb0
Add setting queue depth to HMC test
2013-09-08 22:07:33 +02:00
2d6dfe2a9e
Allow px4io detect to be run when IO is already running
2013-09-08 20:40:26 +02:00
e8c309fb14
Workaround to prevent crash during mag calibration
2013-09-05 15:57:09 +02:00
e301bb4d94
Reset baudrate after px4io update
2013-09-03 17:07:41 +02:00
1c5ceb17e8
Merge pull request #304 from julianoes/ardrone_fixes
...
Prevent flips at high throttle
2013-09-03 05:58:56 -07:00
3c0c11aec3
v4 compatibility
2013-09-03 07:49:57 +02:00
54644e4206
Allow tone_alarm cmd to take filename as parameter
...
- Restore ability to play beloved William Tell Overture... from file
2013-08-31 16:06:15 -04:00
669a802921
Hotfix: Better PX4IO detection feedbak
2013-08-31 11:22:41 +02:00
b80f0d46ae
Allow tone_alarm cmd to use tone names as well as number
...
- remove script dependency on hard coded tone numbers
- fix bug restarting repeating tone after stop
2013-08-31 01:03:32 -04:00
f246b68c7b
Fix parameter range check
2013-08-30 20:24:14 -04:00
efca6f2cb1
Remove unused tones and save about 6K flash space
...
- Comment out unused tones
- Create symbolic tone numbers rather than hardcoded
2013-08-30 20:12:35 -04:00
2b62497fb5
Fixed build error
2013-08-30 17:19:03 +02:00
e2b602339a
Cleanup of detect return
2013-08-30 17:05:21 +02:00
61936412f3
Speeded up IO startup, needs review
2013-08-30 15:40:28 +02:00
9bcfe49cff
Changed RGBLED behaviour, breathe mode when disarmed and ready to arm
2013-08-29 16:45:33 +02:00
55cfa5152c
Made low/critical warnings consisting
2013-08-29 16:41:59 +02:00
f2f66432d7
Grab UTC time from GPS
2013-08-28 08:49:21 -07:00
756d67f2de
Removed non-helpful verbosity
2013-08-28 16:38:09 +02:00
feb4dad9e1
Fixed IO detect message
2013-08-28 15:22:24 +02:00
a48be0446b
Added IO detect command to be smart about what to start before actually doing it
2013-08-28 14:58:53 +02:00
76a9e34e08
I2C airspeed driver needs 2 retries
...
this prevents I2C transfer errors every few seconds with the
meas_airspeed driver
2013-08-28 11:17:22 +02:00
935ed2fe49
meas_airspeed: don't use stale/bad data in airspeed reading
...
also fixed handling of perf counters on error
2013-08-28 11:16:55 +02:00
fdbc09e2a5
avoid counters going above limit in INCREMENT()
...
when using INCREMENT() the counter would temporarily read equal to
limit, which could cause an issue if the task is preempted.
(this macro should be in a common header, though which header?)
2013-08-28 11:16:30 +02:00
ad732ee3a1
free perf counters in driver destructor
...
this prevents drivers that probe on one bus then instantiate on
another from leaving behind stale/duplicate perf counters
2013-08-28 11:15:43 +02:00
d28f5ac03f
Updated IO firmware upgrade strategy and locations
2013-08-28 09:14:38 +02:00
70c9d48f6c
Merge branch 'fmuv2_bringup' into multirotor
2013-08-27 10:16:18 +02:00
9c58d2c5c6
airspeed: retry initial I2C probe 4 times
...
this fixes a problem with detecting a MS4525D0 at boot
2013-08-27 10:15:34 +02:00
ca96140b21
Allow the tone alarms to be interrupted
2013-08-22 15:53:46 +02:00
e97c39a125
Merge branch 'fmuv2_bringup' into multirotor
2013-08-22 10:14:01 +02:00
11257cbade
Fixed commandline handling
2013-08-22 10:13:47 +02:00
fab110d21f
Moved math library to library dir, improved sensor-level HIL, cleaned up geo / conversion libs
2013-08-21 18:13:01 +02:00
309ea81460
Merged fmuv2_bringup
2013-08-21 15:19:19 +02:00
db1229dca3
Merge pull request #12 from cvg/fmuv2_bringup_lsm303d_config
...
Fmuv2 bringup lsm303d config
2013-08-21 06:10:33 -07:00
5be2f4a792
Moved mavlink log to system lib
2013-08-21 14:54:57 +02:00
4f51f333a9
Adapted the MPU6000 to have the same get range ioctls and defines for defaults
2013-08-21 14:52:20 +02:00
1ede95d252
L3GD20 and LSM303D reset and range config working properly now
2013-08-21 14:21:54 +02:00
64b8f5232b
Build fix, added command line switch norc to disable RC
2013-08-21 13:54:37 +02:00
fc24037b03
Changed range handling of LSM303D once again, added defines for default values
2013-08-21 12:37:06 +02:00
5fbee23945
Added flag to disable RC evaluation onboard of IO (raw values still forwarded)
2013-08-21 11:17:29 +02:00
3875df2fe0
Workaround to get the HMC5883 default rate right
2013-08-21 10:44:47 +02:00
658276e1cc
Add reset and samplerate ioctl to HMC5883 driver
2013-08-21 09:23:21 +02:00
408b29ba61
Don't store m/s^2 and G at the same time
2013-08-21 08:40:51 +02:00
f5c92314f1
Improved LSM303D driver, plus some fixes to the HMC5883
2013-08-20 20:02:06 +02:00
307c9e52c7
Sorry, finally got the axes of the external mag right
2013-08-20 20:00:16 +02:00
2a58929ffd
Merge branch 'master' of github.com:PX4/Firmware into fmuv2_bringup
2013-08-20 16:26:15 +02:00
fd911cd006
Merge branch 'master' of github.com:PX4/Firmware into fmuv2_bringup_new_state_machine_drton
2013-08-20 10:55:21 +02:00
ae3a549d57
Fixed accel self test
2013-08-20 10:39:11 +02:00
Lorenz Meier