Silvan Fuhrer
aecc0aa0c3
AirspeedSelector: do checks for data stopped in airspeed selector, not validator
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-01-22 14:16:22 +01:00
Silvan Fuhrer
061fb9ac07
AirspeedSelector: add const
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-01-22 14:16:22 +01:00
Silvan Fuhrer
cd2c366e22
AirspeedSelector: remove unnecessary reboot required and Experimental comments in params
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-01-22 14:16:22 +01:00
Silvan Fuhrer
11dbc7e17f
AirspeedSelector: improve description of ASPD_FALLBACK_GW
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-01-22 14:16:22 +01:00
Silvan Fuhrer
0f1207dd7e
AirspeedSelector: improve readability
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-01-22 14:16:22 +01:00
Daniel Agar
e0b33ba842
mavlink: temporarily disable ACTUATOR_OUTPUT_STATUS stream by default
...
- the presence of this stream appears to be causing the MAVSDK tests to fail and needs to be investigated
2021-01-21 11:25:42 -05:00
Matthias Grob
7cdb9e9412
MulticopterPositionControl: altitude comment typo
2021-01-21 09:43:12 -05:00
ArthurLamberticus
82d32c7f3f
mavlink: add ACTUATOR_OUTPUT_STATUS stream
...
Co-authored-by: Lise Prunier <lise.prunier@aerialcoboticus.com>
2021-01-21 09:30:43 -05:00
bresch
d7812f83f1
mag_cal: fix race condition causing invalid mag calibration
...
In some cases, the fitness of the optimizer does not shrink at each
iteration, causing the "decreasing fitness check" to fail. This stops
the optimization and returns with sub-optimal, or unrealistic results.
2021-01-20 10:50:35 -05:00
Mathieu Bresciani
8d8b58efc3
Add logging of mag calibration data (mag_worker_data)
...
Co-authored-by: Julian Kent <julian@auterion.com>
2021-01-20 09:44:45 -05:00
CUAVcaijie
bed77c2988
add notes
2021-01-19 20:42:58 +01:00
CUAVcaijie
297a428cc0
Fix the case where the flight controller is connected to the battery (charge 100), QGC shows no battery
2021-01-19 20:42:58 +01:00
Daniel Agar
ac8f4e3c48
mc_pos_control: only update constraints if topic updated
...
- update failsafe constraints
2021-01-19 14:44:42 +01:00
Daniel Agar
3e5e5ab1d5
control_allocator and angular_velocity_controller throttle parameter_update subscription
2021-01-18 11:25:37 -05:00
Beat Küng
c36340d29a
ActuatorEffectivenessMultirotor: set effectiveness to zero when computing the matrix
...
Just to be on the safe side.
2021-01-18 11:25:37 -05:00
Beat Küng
212ec821b1
control_allocator: set unused actuators to trim instead of min
2021-01-18 11:25:37 -05:00
Beat Küng
3606f86518
control_allocator: ensure unused outputs are initialized to min
...
Mostly important in cases where the ouputs would change (e.g. param change)
2021-01-18 11:25:37 -05:00
Beat Küng
3dad79d8f5
control_allocator: inline one-line setters & getters
2021-01-18 11:25:37 -05:00
Beat Küng
164511a7b5
control_allocator: avoid vector copies and sqrt()
2021-01-18 11:25:37 -05:00
Beat Küng
0e66b0876b
control_allocator: change SequentialDesaturation to existing MC mixer
...
And limit the operations to the number of configured outputs.
Only using the number of configured actuators reduces CPU load by ~2% on
F7 @1khz.
2021-01-18 11:25:37 -05:00
Beat Küng
308f614735
refactor control_allocator: directly get the effectiveness matrix when updated
...
Reduces stack + RAM usage
2021-01-18 11:25:37 -05:00
Beat Küng
38782029ad
fix control_allocator: set _last_run at the correct place
2021-01-18 11:25:37 -05:00
Beat Küng
0e86ab47f6
fix control_allocator: use 'delete' instead of 'free', guard against out-of-memory
2021-01-18 11:25:37 -05:00
Beat Küng
066464c4e8
control_allocator: remove unused _task_start
2021-01-18 11:25:37 -05:00
Beat Küng
25f3fe8456
fix control_allocator_status: torque_setpoint_achieved and thrust_setpoint_achieved are bool
2021-01-18 11:25:37 -05:00
Julien Lecoeur
343cf5603e
initial control allocation support
...
- control allocation module with multirotor, VTOL standard, and tiltrotor support
- angular_velocity_controller
- See https://github.com/PX4/PX4-Autopilot/pull/13351 for details
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Roman Bapst <bapstroman@gmail.com>
2021-01-18 11:25:37 -05:00
Julian Kent
fc6b61dad1
Try 'min' for units
2021-01-18 16:26:53 +01:00
Julian Kent
d99d52960e
Fix default _rtl_xxx values
2021-01-18 16:26:53 +01:00
Julian Kent
5a9fe312b5
Fix test failure on rebase: set lpos valid
2021-01-18 16:26:53 +01:00
Julian Kent
af8d178ae5
Fix spurious RTL triggers
...
Two sources:
1. global to local conversion was sometimes giving issues, so do everything in global
2. on startup the RTL didn't check if the home position was valid before processing it
2021-01-18 16:26:53 +01:00
Julian Kent
b5f0a7ea03
Fix RangeRTL test
2021-01-18 16:26:53 +01:00
Julian Kent
5500a84b6a
Add timestamp to RTL message
2021-01-18 16:26:53 +01:00
Julian Kent
f169247bc2
Add RTL topics to ulog default profile
2021-01-18 16:26:53 +01:00
Julian Kent
67082ccb2b
Test the vehicle type parameter usage
2021-01-18 16:26:53 +01:00
Julian Kent
100c64c790
Test the navigator side, and fix another trig edge case
2021-01-18 16:26:53 +01:00
Julian Kent
a736ba2435
Minor tweak in wind handling
2021-01-18 16:26:53 +01:00
Julian Kent
e847ef1a4d
Add trig tests for wind calculations, and fix bugs / edge cases
2021-01-18 16:26:53 +01:00
Julian Kent
7482413005
Add Range-based RTL
2021-01-18 16:26:53 +01:00
Ricardo Marques
e817fb83f5
pwm_extra: Add PWM_EXTRA parameters.
...
Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com>
2021-01-18 15:43:28 +01:00
Ricardo Marques
78c05275d2
tailsitter: Fix differential thrust in FW mode.
...
Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com>
2021-01-18 09:04:27 +01:00
David Jablonski
2ed48f041c
mavlink: Templated SCALED_IMU mavlink stream
2021-01-17 12:32:51 -05:00
Matthias Grob
031bbb7f3e
FlightModeManager: handle commands all the time
...
Moving the command handling to a separate function that gets called
whenever a vehicle command is available to always react on commands
and not just when already a task is running.
This solves e.g. commanding an Orbit when in Staibilized.
2021-01-17 15:46:30 +01:00
Matthias Grob
df54f938ef
FlightModeManager: correct setpoint struct initialization
...
It is important that setpoints get initialized with NAN and not overwritten
if specifically set by a successful flight task execution. It's then
clear if any setpoints were intentionally and successfully set.
Crucial for the position controller's emergency failsafe and the
seamless setpoint handover to the next flight task.
2021-01-17 15:46:30 +01:00
Matthias Grob
63db61a700
FlightModeManager: correct acceleration setpoint feedback naming
...
The variable was never renamed correctly in this in between layer when
we switched from normalized thrust to acceleration setpoints.
2021-01-17 15:46:30 +01:00
Daniel Agar
4d7b875ee2
flight_mode_manager: merge with flight_tasks
2021-01-17 15:46:30 +01:00
bresch
eaa2ae9dc9
ekf2: add param to enable synthetic mag Z fusion mode
2021-01-17 12:06:59 +01:00
bresch
983234e29d
ekf2: add param to set rng check hysteresis
2021-01-17 12:06:59 +01:00
Silvan Fuhrer
195a900ecf
change default of RTL_LAND_DELAY to 0
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-01-17 12:05:30 +01:00
Silvan Fuhrer
cee4016665
Preflight checks: Airspeed checks update
...
-check for valid airspeed_validated (declared valid plus updated less than 1s ago)
-added param (COM_ARM_ARSP_EN) to enable/disable check for max airspeed for arming set max
airspeed limit to half of stall airspeed
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-01-16 10:26:55 -05:00
Matej Frančeškin
ba6a8080ea
mavlink: don't respond to MAV_CMD_REQUEST_MESSAGE if component doesn't match
...
PX4 is responding with NACK to MAV_CMD_REQUEST_MESSAGE from a GCS to
payload-manager which confuses a GCS.
PX4 shouldn't respond to commands that are not broadcasted or specificaly
addressed to it.
2021-01-15 10:57:20 -05:00