7cdb2364e9
ManualVelocitySmoothingXY - Add simple unit test
2019-09-19 17:31:49 +02:00
f5d7eb4d87
Refactor FlightTaskManualPositionSmoothVel
2019-09-19 17:31:49 +02:00
080eedfd02
ManualPositionSmoothVel - Split large function into smaller ones, split XY and Z axes
...
Next step is to move as much as possible to a library in order to
reuse the Z axis in the Altitude FlightTask
2019-09-19 17:31:49 +02:00
453b6a39e4
TrajMath: move from FlightTasks/Utility into mathlib library because the function is also used by other libraries
2019-09-19 14:09:44 +02:00
e6b7062442
TrajMath: replace type placeholder with floats
2019-09-19 14:09:44 +02:00
e9ab6a75ba
MC rate control - Scale the integrator with K during the integration
...
part to avoid having to scale its saturation separately. This is
required to avoid premature saturation of the integrator when using
the K term.
Also remove double saturation of the integrator
2019-09-19 14:05:28 +02:00
67e528ec0c
Takeoff - allow publishing NAN longitude and latitude
...
A NAN is interpreted in the FlightTaskAuto as a non-valid global coordinate and sets a local position.
If a zero is sent instead, the global coordinate is recognized as valid and will be executed.
This is a problem when the global position is gained for the first time after takeoff and that a valid global reference did not exist before
2019-09-19 14:03:58 +02:00
549a962553
EKF2: move handling of invalid range into ECL ( #12988 )
...
* ekf2: Move handling of invalid range finder data inside ecl library
The ecl library EKF is able to use vehicle motion and in-air status to better determine when the default on-ground range finder reading can be used.
The description for the EKF2_MIN_RNG parameter has been updated to make its use clearer.
2019-09-19 11:29:34 +02:00
fa13f63db6
ekf2: temporarily hardcode new quality information to unkown
...
until priseborough's and nicovanduijn's pr #12950
2019-09-18 22:01:36 -04:00
c8d0eba1d2
Update ecl and matrix to safe matrix access
2019-09-18 22:01:36 -04:00
1ecbf8efd2
test_matrix: remove duplicate namespace accesses
2019-09-18 22:01:36 -04:00
2d4ecab3b0
Remove unsafe access to .data() and _data in Matrix
2019-09-18 22:01:36 -04:00
78bf12f0db
px4_tasks: reduce POSITION_CONTROL priority
...
* this is to prevent the loss of any sensor data or estimator time slip in the event of a position controller or flight task overrun
2019-09-18 09:55:06 -04:00
494f35d5f4
Mavlink: wait for boot complete before sending or receiving anything
2019-09-18 09:07:55 -04:00
be61d93d64
tfmini split out header and main
2019-09-17 21:50:59 -04:00
9b7ef7141f
tfmini cleanup and use PX4Rangefinder
2019-09-17 21:50:59 -04:00
18eaeb564d
PMW3901 improvements ( #12977 )
...
* PMW3901: use frame count and quality metric
* PMW3901: set qual to 0 for unsuccessful SPI reads
* PMW3901: improve comment for collect_time
* PMW3901: set qual to zero for huge flow values
2019-09-17 10:54:56 -04:00
72e93a9c36
fixed total flight time counting bug
...
After landing it can happen that a second take off is detected and then the _takeoff_time is rest, resulting in a wrong total flight time counter. With this fix the flight time is reliably counted from the first take off until the vehicle is disarmed. Normally the vehicle will not spend much time armed after landing, if it does the flight time will be off but this is the same as before this fix. This fix was tested in several flight experiments.
2019-09-17 14:52:27 +02:00
c13835c0f0
replay module split replay_main.cpp into separate compilation units
2019-09-17 14:33:04 +02:00
270e12a4df
VelocitySmoothing: refactor local scope t variables instead of array
2019-09-17 09:27:00 +02:00
da8ac8cafb
VelocitySmoothing - Clean up updateTraj function based on Matthias' comments
2019-09-17 09:27:00 +02:00
b82fa68893
VelocitySmoothingTest - Fix typo and use "zero" instead of "null"
2019-09-17 09:27:00 +02:00
42cedb7fda
VelocitySmoothing - Change direction of "brake" as braking means that
...
only the T3 part is required and that the jerk applied during T3 is the
opposite of the one defined by "_direction".
2019-09-17 09:27:00 +02:00
8490266be8
VelocitySmoothing - (Re)set _state_init every time _state is (re)set
2019-09-17 09:27:00 +02:00
654938f6a1
VelocitySmoothing - Cosmetic changes (new lines, reorganize functions),
...
regroup both updateTraj functions and edit some comments
2019-09-17 09:27:00 +02:00
0b765a1642
AltitudeSmoothVel - Update to use new implementation of VelocitySmoothing
...
Remove jerk reduction (not needed in the new implementation)
2019-09-17 09:27:00 +02:00
862454827e
VelocitySmoothingTest - Test that the trajectory is always within the constraints
2019-09-17 09:27:00 +02:00
8cc2a7018e
VelocitySmoothing - Re-enable time stretch, integrate dt to get local time.
...
Also split a few functions into smaller ones for readability, fix
formatting, use geters to get the current state of the trajectory
instead of return arguments.
2019-09-17 09:27:00 +02:00
c7696488fe
VelocitySmoothing - Improve computation of the direction of the trajectory by predicting the velocity at zero acceleration instead of the current velocity
...
This helps when the current velocity is smaller than the target but that
the acceleration is too large such that the velocity will overshoot.
Without this check, the algorithm increases the acceleration which leads
to an even larger overshoot.
2019-09-17 09:27:00 +02:00
052932fa95
VelocitySmoothingTest - Update unit test to use the same parameters ordering (time, setpoint) as the VelocitySmoothing class
2019-09-17 09:27:00 +02:00
c13499e64b
test_velocity_smothing - Update test script to use new polynomial evaluation algorithm
2019-09-17 09:27:00 +02:00
a03cc495ce
VelocitySmoothing - Refactor class to use polynomial evaluation instead of numerical integration
...
This solves many numerical issues when the trajectory is close to the
primary NE axes (small velocities). It is also more robust when dt is
large and has some jitter.
2019-09-17 09:27:00 +02:00
0c0b261ff2
ubuntu.sh - remove modemmanager
2019-09-17 00:38:14 -04:00
5507f14bb2
Jenkins HIL disable rgbled
2019-09-15 17:17:09 -04:00
ed6c7cc806
cmake remove unused/broken _no_optimization_for_target
2019-09-15 17:16:38 -04:00
251831f7af
cmake px4_add_library remove unused PX4_LIBRARIES property
2019-09-15 17:16:38 -04:00
dc46b6a749
cmake px4_add_module MAIN is always present (required)
2019-09-15 17:16:38 -04:00
fb7521eb5e
cmake px4_base -> px4_parse_function_args
2019-09-15 14:36:38 -04:00
d256fb8770
cmake px4_find_python_module move to standalone file
2019-09-15 14:36:38 -04:00
d27dfcd921
NuttX CMakeLists.txt extract helpers (jlink, upload, etc)
2019-09-15 14:36:38 -04:00
f2189dd045
CMakeLists.txt extract top level helpers (ccache, doxygen, metadata, etc)
2019-09-15 14:36:38 -04:00
d4f984fea5
FlightTaskAutoLineSmooth: Fix comment to be style compliant
2019-09-13 18:10:05 +02:00
47401d1177
AutoLineSmoothVel - Replace min/max absolute constraints with a function named constrainAbs
...
This function constrain the absolute value of some value but keeps the original sign.
2019-09-13 17:46:01 +02:00
3c5b24037a
AutoLineSmoothVel - Improve virtual pilot logic that provides velocity setpoints to the trajectory generator.
...
Constrain the generated velocities in the NE inertial frame rather than
just constraining the norm.
2019-09-13 17:46:01 +02:00
59f54a7fd8
mathlib - Add FLT_EPSILON deadzone in sign computation
2019-09-13 17:46:01 +02:00
410dd85289
Comment out the ll40ls (LidarLite) driver from the fmu-v2 build.
2019-09-13 11:03:13 -04:00
a26865c279
drivers: set CM8JL65 signal_quality invalid beyond bounds
2019-09-13 10:42:10 -04:00
78279f6587
Unit tests for Obstacle Avoidance interface ( #12816 )
...
* FlighTask: remove legacy definition of empty_trajectory_wapoint
* add unit tests for the ObstacleAvoidance interface
2019-09-12 14:37:31 +02:00
39451b811a
Do syscall for time once, outside of loop
2019-09-11 12:34:59 -04:00
b27d6a958a
Account for the time since range data arrived
2019-09-11 12:34:59 -04:00
bresch