fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-31 02:21:36 +08:00
Code Issues Packages Projects Releases Wiki Activity
39,727 Commits 852 Branches 161 Tags
4e06b40e2bc90bbbfee562dd8a43db75b81020f4
Commit Graph
100 Commits
This Branch
This Branch
All Branches
Author SHA1 Message Date
Daniel Agar cc1fee525a lib/sensor_calibration: handle calibration slot change on parameter update 2022-01-10 17:16:50 -05:00
Daniel Agar ab547bb982 sensors/vehicle_angular_velocity: RPM notch don't fully disable if first harmonic frequency drops below minimum frequency 
- keep higher frequency harmonics enabled per ESC
 - cleanup timestamp handling (timeouts, etc)
 2022-01-10 14:51:29 -05:00
Daniel Agar b58922a5d7 sensors/vehicle_angular_velocity: notch filters automatically reset on sufficient parameter change 2022-01-10 14:51:29 -05:00
Daniel Agar 7d632254be NotchFilter push initialization/reset into filter 
- this simplifies the reset by allowing a notch filter to reset as
needed
 - improves cascade initialization, on reset each filter will reset
properly from the previous
 2022-01-10 14:51:29 -05:00
Daniel Agar 2e2ac36cab drivers/uavcan: make firmware server available on both CAN1/CAN2 always (if enabled) 
- uavcan firmware server no longer shuts down when arming (nodes might restart in flight)
 - always handle UAVCAN parameters with or without the FW server active
 - remove legacy ESC enumeration in FW server
 2022-01-10 11:13:02 -05:00
Daniel Agar d9e7315420 sensors: automatically set initial accel/gyro calibration if stable bias available 2022-01-10 10:46:37 -05:00
Daniel Agar e731fcdbc0 sensors (accel/gyro/mag) determine if external with device id 2022-01-10 10:31:07 -05:00
Daniel Agar 45040be669 ekf2: accel/gyro/mag sensor cal minor cleanup 
- cleanup obsolete comments
 - remove debug helpers
 - add additional variance requirements to mag bias stable (matching accel & gyro)
 2022-01-10 09:55:59 -05:00
Daniel Agar c3ca40a98f drivers/px4io: delete monitor command 
- the px4io console isn't even connected on most flight controllers
 2022-01-10 09:51:11 -05:00
Daniel Agar e5d49f6fff drivers/px4io: delete unused detect 2022-01-10 09:51:11 -05:00
Daniel Agar d077ca15fb delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test 2022-01-10 09:51:11 -05:00
Daniel Agar df44df2df6 delete systemcmds/esc_calib 
- this is redundant with commander esc_calibration
 2022-01-10 09:51:11 -05:00
Daniel Agar 03bdc460d8 drivers/px4io: PWM_SERVO_GET_FAILSAFE_PWM don't get registers directly 2022-01-10 09:51:11 -05:00
Daniel Agar d3301ba826 delete PWM_SERVO_GET_TRIM_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar 8de59dad32 delete PWM_SERVO_SET_TERMINATION_FAILSAFE 2022-01-10 09:51:11 -05:00
Daniel Agar 1739ecc981 delete PWM_SERVO_SET_FORCE_FAILSAFE 2022-01-10 09:51:11 -05:00
Daniel Agar 649d3e3f55 delete PWM_SERVO_SET_DISABLE_LOCKDOWN/PWM_SERVO_GET_DISABLE_LOCKDOWN 2022-01-10 09:51:11 -05:00
Daniel Agar b7ed4fd3e0 delete PWM_SERVO_SET_DISARMED_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar 551a31ce2f delete PWM_SERVO_SET_FAILSAFE_PWM 2022-01-10 09:51:11 -05:00
Daniel Agar daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00
Daniel Agar 78b3d22471 lib/mixer_module: consume output_limit library 2022-01-10 11:59:55 +01:00
Daniel Agar 71d8b15b73 commander: fix COM_HOME_EN missing case 
- VEHICLE_CMD_COMPONENT_ARM_DISARM is yet another path that calls set_home_position()
 2022-01-09 20:52:07 -05:00
Daniel Agar 0b1402afe2 Tools/HIL/test_airframes.sh enable all mavlink and GPS 2022-01-08 18:11:43 -05:00
Daniel Agar 6c97700eaa move sensor calibration parameters to yaml 2022-01-07 19:00:41 -05:00
Daniel Agar c17a9e8003 sensors/vehicle_imu: refactor SensorCalibrationUpdate() to separate accel/gyro cal saving 2022-01-07 09:40:51 -05:00
Daniel Agar aec97e0020 sensors: minor IMU bias saving updates 
- sensors/vehicle_imu: reset learned cal on any calibration change
during parameter update
 - sensors/vehicle_imu: cleanup logic estimated bias -> calibration offset
saving
   - don't invalidate saved calibration (the point is to keep the last valid)
   - remove old debug code, etc
 - sensors/vehicle_imu: notify parameter changes if accel or gyro
calibration has changed
 - lib/sensor_calibration: add calibrated() and calibration_index()
getters, keep Accelerometer/Gyroscope/Magnetometer in sync
 2022-01-07 09:40:51 -05:00
Daniel Agar 30ccfdb2ed sensors/vehicle_magnetomeer: fix copyright year 2022-01-06 20:27:56 -05:00
Daniel Agar 170849c8f8 ekf2: expand accel bias stability criteria 2022-01-04 13:57:49 -05:00
Daniel Agar e835a7c4ea boards: enable readline history and tab completion on newer boards 2022-01-03 10:44:32 -05:00
Daniel Agar 9d1558af25 ekf2: selector use status timestamp for timeout rather than timestamp_sample (delayed time horizon) 
- update stale checks for publication to use hrt elapsed time from
timestamp sample
 2022-01-03 09:20:44 -05:00
Daniel Agar 333edfe12f ekf2: use delayed IMU timestamp for publication's timestamp_sample 2022-01-03 09:20:44 -05:00
Daniel Agar 35502c249d ekf2: don't use Vectors for height innovations (baro, rng, etc) 2022-01-03 09:20:20 -05:00
Daniel Agar 75bb2f8dd2 Jenkins: hardware temporarily tolerate sd_bench failures on px4_fmu-v5_debug 2022-01-02 14:47:52 -05:00
Daniel Agar 673d4544d1 parameters: verify param backup after export 2022-01-02 10:46:34 -05:00
Daniel Agar 8e26b33009 tinybson: file write error add more detail 2022-01-02 10:46:34 -05:00
Daniel Agar 80ef6e19df tinybson: explicitly append int32 or int64 2022-01-02 10:46:34 -05:00
Daniel Agar 9cbb5c9920 parameters: fix export shutdown locking 
- in NuttX bchlib keeps a sector sized buffer that might not be written
out to RAMTRON until the file is closed
 2022-01-02 10:46:34 -05:00
Daniel Agar 2153710917 Tools/HIL/monitor_firmware_upload.py don't fail on any ERROR 
- on first boot we only care that it completes (gets to nsh prompt)
 2022-01-02 10:05:30 -05:00
Daniel Agar c421bff73c Tools/HIL: use pyserial spy:// to log all serial traffic and dump on failure 2022-01-01 22:25:29 -05:00
Daniel Agar 7df1721d32 ROMFS: rcS disable simplistic SD I/O test 
- this was added when trying to identify SD card issues at boot and
trigger a format, but didn't provide any value
 2022-01-01 18:43:27 -05:00
Daniel Agar f76aa0e772 cmake: NuttX ARMV7M_STACKCHECK skip ekf2 
- px4_fmu-v5_stackcheck switch from icm20689 -> bmi055 (lower rate)
 - this is to make performance tolerable
 2022-01-01 18:43:27 -05:00
Daniel Agar e9283d90cc systemcmds/netman: fix code style 2022-01-01 18:40:47 -05:00
Daniel Agar 0029317e55 Jenkins: hardware additional reboots no longer required 2022-01-01 14:06:05 -05:00
Daniel Agar 439ad7daea Jenkins: hardware disable calib_delay (too slow) and manual SD format 2022-01-01 12:10:28 -05:00
Daniel Agar 501474993e Tools/HIL: default to USB UART if available 2022-01-01 10:49:30 -05:00
Daniel Agar 77b65ee564 boards: px4_fmu-v5_debug disable stack check 
- this is redundant with px4_fmu-v5_stackcheck
 2021-12-31 19:34:18 -05:00
Daniel Agar 247b975675 Tools/HIL: disable XON/XOFF, consistent timeouts, proper input buffer clear 2021-12-31 19:28:40 -05:00
Daniel Agar 03371f8522 NuttX with bch flush backport 2021-12-31 10:59:56 -08:00
Daniel Agar 1b6700592b parameters: require valid BSON document size 2021-12-30 16:36:23 -05:00
Daniel Agar 3514458f42 Tools/HIL/test_airframes.sh: dump all parameter storage after bootup to verify contents 2021-12-30 12:43:00 -05:00
Daniel Agar b06215d038 Tools/HIL/test_airframes.sh: run param dump after save to verify BSON 2021-12-30 11:11:14 -05:00
Daniel Agar 6706d9b434 Jenkins: always fully clean git workspace 2021-12-29 17:14:11 -05:00
Daniel Agar 6d0339ba0c I2CSPIDriverBase: sensor start failure ERROR if internal, WARN if external 2021-12-28 11:05:35 -05:00
Daniel Agar 990d7c159d pwm_out: cleanup and prep for linux compatibility 2021-12-28 11:04:00 -05:00
Daniel Agar 10f4a2e91f boards: omnibus_f4sd_default disable systemcmds to save flash 2021-12-27 12:19:55 -05:00
Daniel Agar 3ef9c2d16c boards: holybro_kakutef7_default disable modules/gyro_calibration to save flash 2021-12-27 12:19:55 -05:00
Daniel Agar d94767ef88 cmake: NuttX use cygwin friendly path for linker script 2021-12-27 12:19:12 -05:00
Daniel Agar 3f17acdcc9 boards: mro_ctrl-zerl-h7-oem pin fixes (sync with mro_ctrl-zero-h7) 2021-12-27 09:25:21 -05:00
Daniel Agar 0f4e1dd9f9 boards: mro ctrl-zero-h7 pin fixes 2021-12-27 09:25:21 -05:00
Daniel Agar 236794235a parameters: export empty BSON document even if there are no parameters to save 
- otherwise a 'param reset_all' won't be saved until a parameter is changed
 2021-12-27 09:17:00 -05:00
Daniel Agar 33d7b42040 parameters: import quietly retry if there's no data (as a precuation) 2021-12-27 09:17:00 -05:00
Daniel Agar 20d3e6f4e1 parameters: add simple BSON verification pass after export 2021-12-27 09:17:00 -05:00
Daniel Agar 98d706772e boards: px4_fmu-v2_rover disable events module to save flash 2021-12-24 20:06:13 -05:00
Daniel Agar 712353ea56 gyro_calibration: increase required samples (to be more conservative) 
- make sure variance is checked across all available sensors
 2021-12-24 19:53:44 -05:00
Daniel Agar 3f3836afa8 parameters: simplify import mark_unsaved and don't fail bson decode unnecessarily 2021-12-24 14:32:40 -05:00
Daniel Agar d1cd4904dc parameters: param_value_is_default avoid locking if value unchanged 2021-12-24 14:32:40 -05:00
Daniel Agar c0b8f2952c parameters: param_get_default_value avoid locking if value is static default 2021-12-24 14:32:40 -05:00
Daniel Agar 27a113ecab parameters: param_get avoid locking if value is static default 2021-12-24 14:32:40 -05:00
Daniel Agar cd8ce4d01e parameters: remove obsolete perf_end 2021-12-24 14:32:40 -05:00
Daniel Agar 38731662c6 parameters use bitset for mark_unsaved 2021-12-24 14:32:40 -05:00
Daniel Agar 0e0639a5bf Jenkins: hardware don't tolerate logger failures 2021-12-24 14:31:21 -05:00
Daniel Agar b054fc7b8b navigator: trivial code style fix 2021-12-24 10:55:20 -05:00
Daniel Agar 00eae055ac lib/sensor_calibration: don't save uninitialized priority parameter immediately 2021-12-23 17:49:11 -05:00
Daniel Agar e694fa906b tinybson: add more error output on node name overflow 2021-12-23 17:45:50 -05:00
Daniel Agar 47d6a6c63d Tools/HIL/test_airframes.sh dump parameters before reboot (for verification) 2021-12-23 17:45:50 -05:00
Daniel Agar 14c2225b1c ROMFS: rcS dump parameter backup contents before using 
- this is mainly for debug comparion
 2021-12-23 17:45:50 -05:00
Daniel Agar 38af93085b linux_pwm_out: use PWM_MAIN parameter prefix 
- this keeps things simpler for now across the old and new output
configuration
 2021-12-23 15:57:11 -05:00
Daniel Agar 64e00c41d4 posix-configs: fix bbblue and rpi param import 2021-12-23 15:57:11 -05:00
Daniel Agar c8f2a29d67 boards: beaglebone_blue_default fix missing linux_pwm_out driver 2021-12-23 15:57:11 -05:00
Daniel Agar a5f58d321e boards: emlid_navio_default fix missing drivers/modules 2021-12-23 15:57:11 -05:00
Daniel Agar 7d7d707db9 commander: add COM_HOME_EN parameter to enable/disable home position 2021-12-23 15:46:31 -05:00
Daniel Agar 28c34a0484 Jenkins: hardware don't force tests dataman to pass and add to stackcheck build 2021-12-23 14:50:47 -05:00
Daniel Agar a4040f7afd px4io_serial: always perform full abort DMA on error 
- enable DMA error perf count
 2021-12-23 12:48:42 -05:00
Daniel Agar 47fcdb1fdb sensors/vehicle_angular_velocity: replace ESC/FFT elapsed perf counters with single cycle perf counter 
- non-trivial perf counters (elapsed & interval) are relatively expensive
 - if ESC and FFT notch filtering are enabled this reduces 6 updates (2 per axis) to 1
 2021-12-21 14:21:10 -05:00
Daniel Agar 0029a75ab0 systemcmds: convert c -> c++ 2021-12-21 09:22:49 -05:00
Daniel Agar 019eaf7038 multicopter: minimize dt jitter by using estimate timestamp_sample 2021-12-17 17:52:28 -05:00
Daniel Agar 43a04c9bca fix PARAM_PREFIX for boards with px4io (CONFIG_BOARD_IO) 2021-12-16 07:20:12 +01:00
Daniel Agar ecc2ca7f98 mathlib: int16_t negate explicitly handle both INT16_MIN and INT16_MAX 
- technically negating INT16_MAX doesn't need special handling, but
this ensures any simple saturation logic downstream works by default
 2021-12-15 12:45:58 -05:00
Daniel Agar d59d16a6cd drivers/accelerometer: adjust int16_t clipping threshold slightly 
- consider data clipped/saturated if it's INT16_MIN/INT16_MAX or within 1
 - this accommodates rotated data (|INT16_MIN| = INT16_MAX + 1) and sensors that may re-use the lowest bit for other purposes (sync indicator, etc)
 2021-12-15 12:45:58 -05:00
Daniel Agar ea29b45282 ekf2: enable mag check by default, but commander only warn 2021-12-15 09:43:46 -05:00
Daniel Agar 3fba7288af ekf2: selector use hysteresis for healthy flag 
- require that an instance is healthy continuously for >= 1s before
allowing it to be used
 2021-12-14 09:52:36 -05:00
Daniel Agar acdcc35392 tests: dataman fix ssize_t printf 2021-12-13 22:51:23 -05:00
Daniel Agar fc17797548 ekf2: delete obsolete _bad_vert_accel_detected 2021-12-13 09:13:39 -05:00
Daniel Agar 986cf288da dataman: remove obsolete persistence and reset reason 2021-12-12 12:06:35 -05:00
Daniel Agar ad1bfb5410 Tools/HIL/reboot.py retry every 90 seconds for up to 5 minutes 2021-12-12 11:53:01 -05:00
Daniel Agar 167edcc77b simulator: add standalone sensor_gps_sim module 2021-12-11 15:03:15 -05:00
Daniel Agar 95b961c622 simulator: add standalone sensor_baro_sim module 2021-12-11 15:03:15 -05:00
Daniel Agar 4edfb4799f simulator: add standalone sensor_mag_sim module 2021-12-11 15:03:15 -05:00
Daniel Agar b71b908ac7 Tools/HIL: explain cmd, use monotonic time 2021-12-11 15:02:49 -05:00
Daniel Agar 0f6e30599c Jenkins: hardware tolerate px4_fmu-v5_debug dataman failures for now 2021-12-10 10:28:19 -05:00