Add warning message in print_info() to alert users that CAN error counter
values may increase during the function call due to internal counter reading
implementation. Users should not fully trust these counters until the
underlying issue is fixed.
Co-authored-by: ljarvela <lasse.jarvela@iceye.com>
* feat: implement UAVCAN LED control for individual light control and assignment
* uavcan led: nit-picks from review
* uavcan led: reduce maximum number of lights
to avoid unused parameters
* uavcan led: simplify anticolision on check
* uavcan led: correctly map 8-bit RGB to rgb565
* Trim param name character arrays to 17
16 characters + \0 termination
* uavcan led: final nit-picks
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
* update uavcan hardpoint: add ability to use it via mavlink cmd and during mission and removed send_command() dedicated for usage via mavlink console
* uavcan hardpoint: allow gripper ID 0
---------
Co-authored-by: Andrew Brahim <35986980+dirksavage88@users.noreply.github.com>
* uavcan esc: remove unused includes
* uavcan arming_status: disarm when terminated
To stay consistent with kill.
* uavcan: publish armed during actuator tests to make it possible spinning motors
* msg: GpsDump: increase queue from 8 to 16 and replace instance with device_id
* uavcan: gnss: MovingBaselineData subscriber for RTCM logging for PPK. Add uORB generation tracking to detect data loss on RTCM injection.
* add instance TODO
* uavcan: collect node info and publish every second
* UORB: Add DeviceInformation Message
Format DeviceInformation.msg with standard comment spaces
* SENS: add getter for device_id
* UAVCAN: add publishing of DeviceInformation based on publised message type, and Node Information
* LOG: add deviceInformation
* MSG:BAT: fix comment to be inline with the max_instaces
* UAVCAN: DeviceInformation, incorporated feedback
* UAVCAN: DeviceInformation, incorporated feedback
* UAVCAN: DeviceInformation, Fixed bug with Powermonitor
---------
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
dshot: fix motor test on CANnode
Also includes fixes for the DShot driver since stop_outputs is removed. The esc info command has been removed because it doesn't work with AM32, can only be used via command line, and complicates the driver
This fixes a number of issues with uavcan ESC control.
- Motor Testing when using a CANnode as a PWM expander now works by allowing the FunctionMotors class to perform prearm control
- The esc.RawCommand message is now always published for configured uavcan ESC outputs. Previously prior to arming the message would be published empty, which causes certain ESCs to enter an error state.
- Useless and redundant code has been removed and small name changes have been applied.
- timestamp was 0 if uavcan::BatteryInfo was received before uavcan::BatteryInfoAux
- scale was not set as unknown (-1) even though it is since it's never updated
- time_remaining was not initialized correctly and could sometimes be 0
unexpectedly which causes the drone to failsafe because there's reportedly no flight time left
The older defines without the L for the APB1 Low domain errored for some
of the timers, such as 6 and 7.
I checked and it turns out the defines with and without L are identical.
* remove temp field from airspeed.msg, adjust temp selection
* temp-sensor hirarchy: airspeed, ext. baro, default value
* directly use diff-press or baro temp in true-airspeed calc
* improve clarity
* add enum for temperature source in VehicleAirData.msg
* uavcan: add GNSS heading from relposheading
* ekf2: new EKF2_GPS_YAW_OFF parameter to configure any offset in GNSS heading
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
- upstream libuavcan was broken and then marked deprecated, this fully absorbs the submodule (renamed libdronecan to deconflict) up to our last good working commit and all commit history is kept
- fixes https://github.com/PX4/PX4-Autopilot/issues/23727 (regression introduced in #23113)
- this puts us in a much better position to evolve the library as needed now that we have full control
I could not extract the open_drone_id helpers to a separate lib because
it would require the mavlink headers while the mavlink library would
also depend on it, so it ended up being a circular dependency.
Instead, I'm now just using the headers from within the mavlink module
as well as from the uavcan driver.
This will send the System message if it is already being sent by a ground
station. Otherwise, it will assemble the message itself using the
takeoff/home location.
