fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-25 02:33:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
44,205 Commits 852 Branches 161 Tags
0459481cb4e4e22912fa9d29bea2a1385bf05ea6
Commit Graph
374 Commits
Author SHA1 Message Date
chfriedrich98 33d99a13e8 differential: restructure and update module (#23430) 
* differential: rename module

* differential: restructure and update module
 2024-08-07 09:53:37 +02:00
Daniel Agar e33ba810e9 boards: px4_fmu-v5x_test disable differential_drive module to fix flash overflow 2024-06-18 18:48:13 -04:00
PX4 BuildBot 42cdf41d60 update all px4board kconfig 2024-06-18 09:35:41 -04:00
Beat Küng 52ac9336c4 boards: change default IP from 192.168.0.3 to 10.41.10.2 
192.168.0.x is often used by routers for WIFI/ethernet networks, and thus
can create conflicts.
This can happen for example if a companion is connected to the FMU via
ethernet and at the same time connects to a WIFI network as DHCP client.
 2024-06-10 11:05:50 +02:00
Beat Küng a90cdcfe80 boards/px4/fmu-v{5,6}x: enable uxrce_dds_client on ethernet by default 2024-06-10 11:05:50 +02:00
Beat Küng 2524ac8c2b boards/px4/fmu-v{5,6}x: do not enable mavlink on ethernet for skynode 2024-06-10 11:05:50 +02:00
chfriedrich98 5c64a3ed93 Rover Ackermann module (#23024) 
New module handling Ackermann rover guidance and control.
Only enabled in SITL and in the rover builds for now.
 2024-06-07 17:15:12 +02:00
Daniel Agar a80c96e575 boards: px4_fmu-v5x_test disable payload_deliverer module to save flash 2024-05-29 20:38:49 -04:00
Jacob Dahl 70304fe715 [mavlink] Parameter to always start on USB (#22234) 
* usb: Added parameter to enable always starting mavlink on USB.

    Refactored cdcacm_init into a module and added a paramter to allow always starting mavlink on
    USB, also added a paramter to choose the mode. The current default behavior is to wait and listen
    for data on USB and auto-detect the protocol (mavlink, nsh, ublox). This results in the mavlink
    stream not starting until something else on the mavlink network sends a packet first. The new
    default behavior is to always start mavlink.

    Added parameters
    MAV_USB_ENABLE -- default 1 (always start mavlink on USB)
    MAV_USE_MODE -- default 3 (onboard)

* added 3 retries for opening serial port in mavlink, removed sleep before sercon

* added DRIVERS_CDCACM_AUTOSTART to ark-v6x default.px4board

* added CONFIG_DRIVERS_CDCACM_AUTOSTART=y to default.px4board for boards with CONFIG_CDCACM in their nsh/defconfig

* format

* remove PGA460 from COMMON_DISTANCE_SENSOR to save flash

* remove LIS2MDL from COMMON_MAGNETOMETER to save flash

* disable CONFIG_DRIVERS_CDCACM_AUTOSTART for fmu-v5 protected.px4board

* moved and renamed parameters, removed mode logic in mavlink

* changed parameter names, added mode none

* remove parameters from mavlink
 2024-05-20 12:35:29 -06:00
oravla5 283ae60a15 telemetry: removed iridium driver 2024-04-25 08:23:32 +02:00
Igor Mišić d0532f45b2 telemetry: enable iridium 2024-04-25 08:23:32 +02:00
Matthias Grob 8579175013 Build new IO firmware binaries 2024-04-02 11:59:56 -04:00
Matthias Grob 1096384a38 px4iofirmware: don't switch to disarmed or failsafe value on disabled PWM outputs 
If the output is set to 0 then the FMU had this channel disabled/no function mapped
to it. In that case we do not want to suddenly start outputing failsafe or disarmed
signals.
 2024-03-25 19:21:54 +01:00
Daniel Agar c024ea396a boards/px4/fmu-v5x: remove legacy rover_pos_control to reduce flash usage 2024-03-22 15:17:03 -04:00
Beat Küng 2e12e14a23 boards/px4/fmu-v5x: remove sd_stress & reflect to reduce flash usage 2024-03-21 20:58:21 -04:00
Daniel Agar 34c19b2e5a boards/px4/fmu-v5x: default remove systemcmds/sd_stress to save flash 2024-03-20 12:35:34 -04:00
Niklas Hauser 0186d687b2 Add minimal Skynode RC13 config to the PAB manifest 2024-03-04 13:33:20 -05:00
Matthias Grob b54b4f7dce Rename module differential_drive_control -> differential_drive 2024-02-12 14:29:10 +01:00
PX4 BuildBot 0f3925b21d update all px4board kconfig 2024-02-09 10:48:26 -05:00
David Sidrane dc73d5d634 px4_fmu-v5x:Use BOARD_HAS_HW_SPLIT_VERSIONING & common PAB manifest 2024-01-30 11:15:03 -05:00
David Sidrane 81f3542113 boards:Needing Migration to BOARD_HAS_HW_SPLIT_VERSIONING 2024-01-30 11:15:03 -05:00
Daniel Agar 2c81c9fdea boards: px4/fmu-{v5*,v6*} add dedicated rover board variants (eg px4_fmu-v6x_rover) 2024-01-24 14:06:49 -05:00
Matthias Grob 3de5c609a4 Differential Rover: PR fixes 2023-12-21 16:27:53 +01:00
PerFrivik 3df71d1837 Differential Rover: Differential drive module & library 2023-12-21 16:27:53 +01:00
Matthias Grob d85aaf4dfd v5x/v6x: save flash by not compiling analog OSD by default 2023-11-30 17:16:02 +01:00
Matthias Grob 82c422b818 fmu-v5x: don't build roboclaw driver by default 
it's not used that often and for rovers only.
 2023-11-30 17:16:02 +01:00
PX4 BuildBot afe110cca1 update all px4board kconfig 2023-11-29 20:54:10 -05:00
Matthias Grob 8f4ce28e84 RoboClaw: declutter, make it compile again 2023-11-28 16:30:17 +01:00
PerFrivik c7e780cb6d Roboclaw: Working temporary version that drives around 2023-11-28 16:30:17 +01:00
PerFrivik 549c6b565c ported roboclaw driver from older commits into newest develop branch 2023-11-28 16:30:17 +01:00
PX4 BuildBot 047a5a7abf update all px4board kconfig 2023-11-17 09:14:46 -05:00
Beat Küng 36fbd18bdc px4/fmu-v5x: set mavlink dialect to development for now 
So dynamic modes are available
 2023-11-15 13:18:58 +01:00
Julian Oes 19b681ca1f Remove SYS_USE_IO param 
The param is not really required anymore with the actuator
configuration. Also, when it is set to 0, RC doesn't work for some
boards which would be nice to avoid.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-10 12:17:23 +13:00
Daniel Mesham e00b35e142 boards: default to custom participant for uXRCE-DDS client on Skynode 2023-10-05 08:03:21 +02:00
Silvan Fuhrer 563fd8427a boards: increase init stack size by 100B 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-10-02 09:37:06 +02:00
Konrad 2779a00ac8 VTOL TAKEOFF: Add Config to deactivate, and deactivate on all boards except fmu_v5x and sitl. 
QGC does not support VTOL takeoff and thus this is used to safe flash space.
 2023-09-29 14:25:03 +02:00
Niklas Hauser 43d859313b px4/fmu-v5/6x: Upstream power manager for FMU 
Detects and configures it correctly for the Auterion INA226-based power
modules.
 2023-09-27 10:39:31 -04:00
Igor Mišić c1dbe177b8 boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
Matthias Grob 0200ef9a60 Tools/auterion: add Skynode upload scripts (#21842) 2023-08-21 08:03:07 +02:00
Igor Mišić 904f18f409 boards: remove camera capture and trigger from test builds 2023-07-24 13:10:31 +02:00
Beat Küng bae413a332 v6x: start mavlink on TELEM2 for skynode 
Equivalent to v5x
 2023-07-03 16:20:41 +02:00
Niklas Hauser 8fe65c6722 Driver: Refactor MCP23009 GPIO expander into uORB driver 2023-06-19 07:58:21 +02:00
Beat Küng c95539e8ce boards: increase init stack size by 150B 
External airframes need a bit more stack due to nested configs.
 2023-06-09 21:11:11 -04:00
mcsauder 1707805ed2 Remove the simulator SIH module from fmu-v5x test build and the fixedwing autotune module from the fmu-v5 test build to meet flash constraints. 2023-06-07 12:07:29 -04:00
Beniamino Pozzan 9e5420bbbd microdds_client: rename to uxrce_dds_client 
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
 2023-05-03 11:51:53 -07:00
Daniel Agar b8b80e409f boards: px4_fmu-v5x_test remove drivers/telemetry to save flash 2023-04-27 20:14:26 +02:00
Daniel Agar 5b0b46ff55 boards: px4_fmu-v5x_default disable LPE and ATTQ to save flash 2023-04-27 20:14:26 +02:00
Thomas Stastny 82fd2987c9 fw pos control: revert name until we delineate this module a bit more (#21442) 2023-04-13 17:00:04 +02:00
Daniel Agar cbc067f235 boards: include INS drivers by default on PX4 FMU (eg VectorNav VN-100, VN-200, VN-300) 2023-04-06 14:06:57 -04:00
Daniel Agar f0a95f9572 ekf2: add new kconfig option for multi-EKF 
- disabled if flash constrained or memory constrained
 2023-03-15 09:32:47 -04:00