It was added at a time where the triplet target was directly fed as position setpoint to the controller.
Since the smoothing improvements to FlightTaskAuto(SmoothVel) and removing the previous "aggressive" FlightTaskAuto variant there should be no need anymore for this logic. It can sometimes lead to unexpected sideffects. E.g. the vehicle would suddenly change direction when exceeding some arbitrary threshold.
* FWModeManager: add option to set flag for disabling actuators during launch
Signed-off-by: Silvan <silvan@auterion.com>
* Allocation: add option to each control surface to be locked for launch
Signed-off-by: Silvan <silvan@auterion.com>
* FW rate control: reset integral while control surfaces are locked
Signed-off-by: Silvan <silvan@auterion.com>
---------
Signed-off-by: Silvan <silvan@auterion.com>
Co-authored-by: mahima-yoga <mahima@auterion.com>
* Creating a base for grf lidar
* Serial Drive is working, need to work out distance publish
* WIP Getting Range Data in cm
* Working Rand Distance Values for GRF 250 and GRF500
* Review Changes
* Compiler fixes
* Update to date
* small update
* Fix typo and remover unused libs
* removing unused enum
* Update to the Documentation
* Fiving scaling issue
* update to the logic
* [Feature] Adding I2C driver for the GRF250 and GRF500 models (#26425)
* Adding the GRF I2C driver
* I2C Driver Working
* Removing a lot of unnecessary code
* fixing names
* Changing the i2c Driver to be in the lightware laser
* remove the old driver
* formatting fix
* Adding Ligthware GRF to documentation
* Update to the Documentation
* Ensuring sample_perf ends
* Updating Docs
* uavcannode: implement hardpoint commands (#26334)
* implement cannode hardpoint commands
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
* Update src/drivers/uavcannode/Subscribers/HardpointCommand.hpp
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* Update src/drivers/uavcannode/Subscribers/HardpointCommand.hpp
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* add hardpoint sub to ark cannode, simplify handling of hardpoint broadcast
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
---------
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* voxl_esc: Limit frequency of UART passthru writes to 20Hz
* voxl2_io: Added UART passthru
* docs: update link for px4 ros2 interface lib python api docs
* estimator_interface: remove unused getter
* gnss_checks: always run strict checks on ground
With the goal to never take off if the GNSS solution is not fullfilling the configured requirements still not stopping to use it in case it degrades mid air.
* ekf2 unit-tests: adapt to strict GNSS checks on ground
* escCheck: rework online check to properly report offline ESCs
previous to this
09d79b221f274523349a029e63ab4462e41d0c1c
set `esc_online_flags` e.g. for UAVCAN ESCs which specific one is online and that then got compared to a mask where the first `esc_count` bits were set.
So if only ESC 5 is mapped and online you get the message "ESC 156 offline" because `esc_online_flags = 0b1000` gets compared to `online_bitmask = 0b1` based on `esc_count = 1` and the motor index is `esc[0].actuator_function = 0` wrapped using `0 - actuator_motors_s::ACTUATOR_FUNCTION_MOTOR1 + 1 = 156`.
* FailureDetector: consistent timestamp naming
* FailureDetector: rework motor status check
* FailureDetector: implement upper and lower current limit with offset
* Update src/modules/commander/failure_detector/FailureDetector.cpp
Prevent Buffer overflow
* Update Format
* Subedit
* Shrink and rename image
* Apply suggestion from @hamishwillee
Sounds good
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Apply suggestion from @hamishwillee
More universal approach
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Update to the Documentation
* FailureDetector: rework motor status check
* FailureDetector: implement upper and lower current limit with offset
* Subedit
* docs: update parameter reference metadata
* Remove pregenerated files - that should all be tidied up next time this runs
* remover GRF parameters
* Documentation updates
* Fixing Merge Conflicts
* remove @
* Undo Changes to parameter_reference
* remove the code that will be autogen-ed
* Update the Camake File
---------
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Co-authored-by: Andrew Brahim <35986980+dirksavage88@users.noreply.github.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
Co-authored-by: Eric Katzfey <eric.katzfey@modalai.com>
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Co-authored-by: Matthias Grob <maetugr@gmail.com>
Co-authored-by: Marco Hauswirth <marco.hauswirth@auterion.com>
Co-authored-by: Nick <145654544+ttechnick@users.noreply.github.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
Add warning message in print_info() to alert users that CAN error counter
values may increase during the function call due to internal counter reading
implementation. Users should not fully trust these counters until the
underlying issue is fixed.
Co-authored-by: ljarvela <lasse.jarvela@iceye.com>
* feat: implement UAVCAN LED control for individual light control and assignment
* uavcan led: nit-picks from review
* uavcan led: reduce maximum number of lights
to avoid unused parameters
* uavcan led: simplify anticolision on check
* uavcan led: correctly map 8-bit RGB to rgb565
* Trim param name character arrays to 17
16 characters + \0 termination
* uavcan led: final nit-picks
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
* RtlTimeEstimator: Consider minimum ground speed
This fixes an issue seen when the wind is faster than the trim airspeed,
but not faster than the max airspeed.
In that case the RTL time estimator currently assumes that we always fly
at trim airspeed and are thus unable to cover ground in the upwind
direction. The result is a very large RTL time estimate, resulting in
RTL if configured by COM_FLTT_LOW_ACT.
By considering the FW_GND_SPD_MIN parameter, we correct this wrong
assumption. The RTL remaining time estimate now becomes realistic in
this situation.
* RtlTimeEstimator: assume min ground speed of 5 if param unavailable
The previous commit (6b8fd11) gated smbus and smbus_sbs behind
PX4_PLATFORM=="nuttx" to prevent clang-tidy errors on SITL, but these
libraries depend on device::I2C which has a POSIX implementation
(posix/I2C.cpp). Linux boards like bluerobotics_navigator (armhf) and
emlid_navio2 (aarch64) enable CONFIG_DRIVERS_BATT_SMBUS, which depends
on drivers__smbus — causing CMake to fail with "non-existent target".
Move smbus and smbus_sbs back to unconditional add_subdirectory() so
they are available on all platforms. Keep mcp_common gated behind NuttX
since it includes px4_platform/gpio/mcp.hpp (NuttX-only GPIO headers).
Re-add src/lib/drivers/smbus to the Makefile clang-tidy exclude list
since the SITL compilation database lacks the I2C platform headers
needed for analysis.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
The clang-tidy CI target builds against the SITL (px4_sitl_default-clang)
compilation database. Three libraries in src/lib/drivers/ were
unconditionally added via add_subdirectory(), causing them to appear in
compile_commands.json despite requiring NuttX-only headers:
- mcp_common: includes px4_platform/gpio/mcp.hpp (NuttX platform GPIO)
- smbus: extends device::I2C which resolves to the NuttX I2C driver
- smbus_sbs: includes smbus/SMBus.hpp, same I2C dependency chain
When clang-tidy analyzed these files it failed on clang-diagnostic-error
(fatal: header not found) since the platform headers don't exist in SITL.
The previous commit worked around this by adding the paths to
CLANG_TIDY_EXCLUDE_EXTRA in the Makefile, but the proper fix is to prevent
these libraries from entering the compilation database at all.
Gate mcp_common, smbus, and smbus_sbs behind
if(PX4_PLATFORM STREQUAL "nuttx") in src/lib/drivers/CMakeLists.txt.
This follows the established pattern already used by the device/ library
in the same directory, which conditionally includes NuttX-specific sources
(CDev.cpp, I2C.cpp, SPI.cpp) while compiling posix stubs for SITL.
The other libraries in the directory (accelerometer, gyroscope, led,
magnetometer, rangefinder) are pure abstractions over uORB topics and
internal utilities with no platform-specific hardware dependencies, so
they compile fine on all platforms without any gating.
Remove the now-unnecessary mcp_common and smbus paths from
CLANG_TIDY_EXCLUDE_EXTRA, keeping only the emscripten failsafe exclusion
(requires the emscripten SDK, not a platform build issue).
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Rename ULogMessageInfoTest to ULogMessagesTest and add struct-level
coverage for every message type in the ULog spec:
- File header: magic bytes, size, field offsets
- Flag Bits ('B'): size, field offsets, flag masks
- Format ('F'): size, serialization
- Info ('I'): string, int32_t, and float value layouts
- Info Multiple ('M'): string layout, continuation flag, field offsets
- Parameter ('P'): int32_t and float value layouts
- Default Parameter ('Q'): size, type bits, field offsets
- Subscription ('A'): size, field offsets, serialization
- Unsubscription ('R'): size, serialization
- Data ('D'): size, field offset
- Logging ('L'): size, field offsets, serialization
- Logging Tagged ('C'): size, field offsets
- Sync ('S'): size, magic bytes
- Dropout ('O'): size, default msg_size, serialization
- Message header: size, field offsets, ULOG_MSG_HEADER_LEN
- Enum values: all 13 ULogMessageType codes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Guard the strncpy call with a null check to prevent undefined behavior
if the constructor is ever called with a null path pointer.
Fixes clang-analyzer-core.NonNullParamChecker diagnostic.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
The 48-byte struct (6 Vector2f) is only read inside initializePattern,
so passing by value creates an unnecessary copy.
Fixes performance-unnecessary-value-param clang-tidy diagnostic.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Remove using-declarations for math::constrain, math::max, and
math::min that are never used — all call sites use the fully-qualified
form (e.g. math::constrain()).
Fixes misc-unused-using-decls clang-tidy diagnostic.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
FlightTaskManualAcceleration and FlightTaskOrbit both inherit from
FlightTaskManualAltitudeSmoothVel but were calling FlightTask and
FlightTaskManualAltitude respectively, skipping the intermediate
parent's overrides (smoothing velocity init, parameter chain).
Fix the DEFINE_PARAMETERS_CUSTOM_PARENT macro argument and the
activate() call to use FlightTaskManualAltitudeSmoothVel.
Fixes bugprone-parent-virtual-call clang-tidy diagnostic.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
clang-tidy flags the memcpy of vlen bytes as
bugprone-not-null-terminated-result because the destination buffer
region is left unterminated in memory.
Copy vlen + 1 bytes (including the source null terminator) so the
buffer is null-terminated in memory. The ULog msg_size is not
incremented for the extra byte — the null sits in the struct's
key_value_str padding and is never written to the log file, preserving
the ULog wire format which does not include a null terminator for
string values.
The bounds check (vlen < sizeof(msg) - msg_size) guarantees at least
one byte of headroom beyond vlen, so vlen + 1 is always within the
struct.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Add a gtest that validates the exact binary layout of INFO and
INFO_MULTIPLE messages against the ULog spec. This exercises the same
packing logic as write_info/write_info_multiple and will catch any
accidental changes to the wire format (e.g. including a null terminator
in msg_size).
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Automatically generate the clang-tidy exclusion list from .gitmodules
so new submodules are excluded without manual intervention.
Changes:
- Makefile: Generate CLANG_TIDY_SUBMODULES from .gitmodules paths
- Makefile: Add CLANG_TIDY_EXCLUDE_EXTRA for manual exclusions:
- src/systemcmds/tests (test code, looser style allowed)
- src/examples (educational code, not production)
- src/modules/gyro_fft/CMSIS_5 (vendored ARM DSP library)
- Delete src/systemcmds/tests/.clang-tidy (stale since 2019)
- Delete src/modules/gyro_fft/CMSIS_5/.clang-tidy (redundant)
Rationale: Submodules and vendored code should be linted in their
upstream repositories, not here. This reduces noise and focuses
clang-tidy on code that PX4 maintainers actually edit.
Contributors adding vendored (non-submodule) third-party code should
add their path to CLANG_TIDY_EXCLUDE_EXTRA in the Makefile.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Extend the -Wno-asm-operand-widths workaround to include Linux aarch64
in addition to Apple Silicon. CMSIS DSP contains ARM Cortex-M specific
assembly that clang (but not gcc) warns about on 64-bit ARM platforms.
The assembly code is unused on POSIX builds - only the C fallback
implementations are executed in SITL.
This fixes clang-tidy CI failing on arm64 runners.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ManualControl: Payload Power Switch: default PAYLOAD_POWER_EN false if RC_MAP_PAY_SW is configured. Apply initial switch state for Payload Power
* make format
* ManualControl: init power_en in init()
* ManualControl: Apply payload power state on first switch receipt if not armed
* simplfy
* fix idefs
* simplify
call into a new UORB COMMUNICATOR ICHANNEL shutdown interface if it has been configured, otherwise it
does nothing. This allows ICHANNEL implementations to pass on a shutdown indication to a remote processor.
Implemented the shutdown interface in the muorb module for VOXL flight controllers.
