101 Commits

Author SHA1 Message Date
David Sidrane
1f61dcfb06 modalai_fc-v1: Disable OTG_ID_GPIO 2021-05-05 20:48:06 +02:00
David Sidrane
310d166899 modalai_fc-v1: Initalize PWM as input with Pull Downs 2021-05-05 20:48:06 +02:00
Daniel Agar
58b40fbbb9 boards: move testing to dedicated test variants 2021-04-14 09:21:31 +02:00
Daniel Agar
a07bccc046 boards: modalai simplify defaults with new parameter defaults mechanism (AUTOCNF replacement) 2021-04-12 21:27:53 -04:00
benjinne
9b7eae4043
rc: enable crsf and ghst telemetry on supported boards
Co-authored-by: Benjamin Linne <benjamin.linne.civ@mail.mil>
2021-04-07 08:51:49 +02:00
Benjamin Linne
3261118538 boards: modalai-fc-v1 add rtps.cmake 2021-04-05 17:01:35 -04:00
Daniel Agar
ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)
- include icm20948 on most boards by default
 - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
2021-04-04 21:18:16 -04:00
Daniel Agar
6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
631d1647d3 boards: minimize unnecessary differences in default variants 2021-03-28 14:46:47 -04:00
Lorenz Meier
dd400e9562 Modal: Fix tabs in start script 2021-03-17 22:03:18 +01:00
Daniel Agar
2257c3767e simple gyro auto calibration module 2021-03-15 09:46:47 +01:00
Daniel Agar
f8eaa6e46b ROMFS handle bl_update generically
- include all available legacy bootloaders
2021-03-11 00:38:18 +01:00
Daniel Agar
4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar
19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Beat Küng
7e33d03470 drivers: remove tap_esc
- it's not used anymore
- it would need a refactoring to use mixer_module
2021-02-25 09:28:37 -05:00
Daniel Agar
414f9f81d9
move fake GPS to standalone module 2021-02-20 14:13:36 -05:00
Daniel Agar
ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar
fb2a199621 delete unmaintaned mkblctrl driver 2021-02-14 10:38:15 +01:00
Daniel Agar
a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar
8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar
a2442ffb48 board: enable UAVCAN sensors by default on F7/H7 2021-02-02 09:01:12 +01:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573)
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
Daniel Agar
cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar
763c3b8fda boards: start enabling multi-EKF by default on F7/H7 2021-01-10 17:56:34 +01:00
Matthias Grob
7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
Benjamin Linne
80068093d6 add esc_battery module to modalai/fc-v1 build 2020-12-29 23:41:22 -05:00
David Sidrane
22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane
2247779216 modalai_fc-v1: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar
c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar
233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Tanja Baumann
b5ebdb8e41
add system command to get and set system time
* add system_time command for all boards
2020-09-26 13:09:01 -04:00
Beat Küng
5fdff6a0e4 i2c drivers: add '-k' flag for keep_running directly to BusCLIArguments 2020-09-18 09:45:06 -04:00
David Sidrane
05a415cf4a modalai_fc-v1: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane
c8ef85c090 modalai_fc-v1 Updates for NuttX 9.1.0-
modalai_fc-v1: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
David Sidrane
e8e463b875 cubepilot_cubeyellow Updates for NuttX 9.1.0-
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar
2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
modaltb
d9bbed767c
modalai_fc-v1 - power_monitor/voxlpm: add support for voxlpm v3 (INA231 sensors) 2020-08-19 00:01:31 -04:00
Travis Bottalico
e325ca25bb modalai-fc-v1 - update default MAVLink configuration 2020-08-18 20:45:20 -04:00
Daniel Agar
e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar
13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
Daniel Agar
6f6efd60b7 boards: centralize optional external I2C sensor start
- configured with new parameter SENS_EXT_I2C_PRB
2020-06-10 09:04:13 -04:00
Daniel Agar
5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar
746a8f5cf9 commander: reboot/shutdown usability fixes
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
2020-05-06 13:53:54 -04:00
Daniel Agar
28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar
8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar
06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder
6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar
66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
2020-04-11 21:16:10 -04:00
Daniel Agar
a89bba470a boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
2020-04-08 13:20:54 -04:00