This cherry-picks upstream commits adding NAND flash support for the
Winbond W25N specifically W25N01GV chip.
NAND flash is used together with littlefs, hence I updated that to 2.5.1
to match upstream NuttX.
call into a new UORB COMMUNICATOR ICHANNEL shutdown interface if it has been configured, otherwise it
does nothing. This allows ICHANNEL implementations to pass on a shutdown indication to a remote processor.
Implemented the shutdown interface in the muorb module for VOXL flight controllers.
It's tricky to figure out when to publish especially if some outputs
that should be reporting stop reporting. I had some edge cases where it
would not publish due timers not fully configured, so I decided to just
publish at 200 Hz no matter what data was there to publish.
* Tools: rewrite uploader script
This adds a script called px4_uploader.py which is a complete rewrite
using Claude Code of px_uploader.py.
The main improvements over the previous px_uploader.py script are:
- Separate smaller classes instead of one big uploader class.
- Easier debugging with --verbose or --debug flags.
- Nicer progress animation.
- No more hard to debug Exception swallowing over multiple levels.
- Auto-detection and looping of devices, removing the functionality from
cmake.
- Auto-detection of PX4 devices by USB VID/PID.
- Add noninteractive mode
- Add JSON output mode
* Implemented driver for MCP23017
* fixed compatability with mcp23009. (naming of instantiated GPIO-Devices)
* removed some comments
* removed even more comments
* commented out instatntiation of driver since it will not be used with v6x
* removed last useless comments
* re-activated gpio_mcp23009 driver, removed useless comments and empty lines
* removed empty lines at the end of mcp23017.cpp
* removed empty line
* Implemented driver for MCP23017
* fixed compatability with mcp23009. (naming of instantiated GPIO-Devices)
* removed some comments
* removed even more comments
* commented out instatntiation of driver since it will not be used with v6x
* removed last useless comments
* re-activated gpio_mcp23009 driver, removed useless comments and empty lines
* removed empty lines at the end of mcp23017.cpp
* removed empty line
* basic working implementation
* first improved driver version with shared code base for MCP23009 & MCP23017 (built as state machine with sanity checks)
* removed unused imports
* changed module name from MCP to MCP230XX
* removed debug print statements
* adjusted auto start command of driver
* removed comments
* -added seperate main functions for both derivative modules (mcp23009 and mcp23017)
* compile common functions as shared library in src/lib/drivers
* fixed cleanup of modules
* ->unclean working version with shared common library
* used make format
* working & cleaned version
* -> Added CallbackHandler to be able to use multiple reading GPIO-expanders simultaneously
-> Removed old mcap23009 calls and pin registrations
-> Adjusted GpioIn.msg to contain MAX_INSTANCES
* ->removed unused imports
->used make format
* Fix: Re-enabled platform_mcp_gpio for accton-godwit, cuav, fmu-v5x
* Fix: enabled platform_mcp_gpio in px4/fmu-v5x
* added depency to fmu-v5x
* Fix: removed new lines
* Fix: fixed linker errors
* removed unused linkage against mcp-library
* Made mcp start calls consistent for fmu-v5x and fmu-v6x
* moved logging of comm errors to read/write function directly
* added perf_count for sanity_check
* removed error message
* ensured member variables follow naming convention
* added retries to probe function
* simplyfied state-logic
* add break to terminate loop early
* ensured clean state when register_gpios() fails
* add registered-flag to pins
* used path from top dir instead of relative path in CMakeLists
* used constexpr to set parameters instead of calculating them at runtime
* style: used make format
* fix: corrected i2c_bus assignment
* style: init input of callbackhandler to 0
* fix: mark pin as registered if successful
* style: made arguments const type
---------
Co-authored-by: Alexander Lerach <alexander@auterion.com>
AM32 bdshot doesn't do clock compensation like BLHeli32 did.
Instead we traing BDSHOT timing on known zero value to lock on
best bdshot baudrate to receive.
Reduces CRC and frame errors on AM32 a lot
* rt106x: Use platform SPI hal layer
* rt106x: Add romapi support and reboot to isp/bootloader
* bootloader: imxrt_common: Add rt106x support
* NXP MR-Tropic initial commit
* Add missing file for mr-tropic bootloader
* nxp-mr-tropic:Bootloader Alow Assertion debugging & Keep Ram Vectors
* nxp-mr-tropic: Firmware Boot from bootloader
* nxp-mr-tropic:Add Bootloader bin file
* mr-tropic: Update config and linker
Fixes enet issues with write-back and some code cleanup.
Furthermore increase NOR LittleFS to 256kB to reflect on linker
* Update NuttX
* mr-tropic: fix itcm apping and add mr-tropic to itcm check
---------
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
- enable building in a cmake subdirectory:
- use consistent path to "etc" in build directory
- add a quick fix for mavlink inclusion with
`mavlink/<version>/mavlink.h`, presumably the problem does not
appear normally since somewhere the build root directory is added
to include paths.
- install gazebo config and plugins, the goal is to enable packaging of
PX4 sitl binaries.
- fix dependency on dds_topics.h generation in uxrce_dds_client:
*** No rule to make target 'PX4-Autopilot/src/modules/uxrce_dds_client/dds_topics.h', needed by 'PX4-Autopilot/events/px4.json'. Stop.
https://github.com/PX4/PX4-Autopilot/issues/21788
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* s32k3xx: EMIOS allow independent frequencies for each channel
* mr-canhubk3: update config
* mr-canhubk344: Fix adap board detect
* mr-canhubk344: Use LPSPI1 (Port P1A) for SD card
* airframes: Add B3RB Ackermann rover config
See https://nxp.gitbook.io/mr-b3rb for more information about the NXP
B3RB platform. PX4 Support basic control for now
- removed the bug where some overflow would occur on the PWM signal when
changing the duty cycle of the signal after power up. (PWM_MAIN_DIS,
PWM_MAIN_MIN or PWM_MAIN_MAX)
removed commented code
cleanup of previous cherry-pick
Co-authored-by: henrykotze <henry@autonosky.com>
* platforms: Serial new dedicated writeBlocking method
* finish writeBlocking()
* add back fsync
* updated posix, added string constant for port not open error
* format
* fix build
* remove fsync
* actually remove fsync
* remove fsync from write
* review feedback
---------
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
Jacob Dahl