boards: NuttX update all boards to preallocated sem holder list

- CONFIG_SEM_PREALLOCHOLDERS=32 - CONFIG_SEM_NNESTPRIO=16 (default)
update NuttX and apps to latest with sem holder fixes and updated ostest
2026-06-10 12:40:04 +08:00 · 2022-05-29 13:49:01 -04:00 · 2022-05-29 13:48:15 -04:00 · 2022-05-27 16:28:26 -04:00 · 2022-05-27 16:28:22 -04:00 · 2022-05-27 14:52:00 -04:00
581 changed files with 11867 additions and 20613 deletions
@@ -61,20 +61,18 @@ pipeline {
                     "holybro_kakutef7_default",
                     "holybro_kakuteh7_default",
                     "holybro_pix32v5_default",
+                     "matek_h743-slim",
                     "matek_gnss-m9n-f4_canbootloader",
                     "matek_gnss-m9n-f4_default",
-                     "matek_h743-mini_default",
-                     "matek_h743-slim_default",
-                     "matek_h743_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7-oem_default",
-                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_ctrl-zero-h7_default",
                     "mro_ctrl-zero-h7_rtps",
+                     "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_pixracerpro_default",
                     "mro_pixracerpro_rtps",
                     "mro_x21-777_default",
@@ -89,27 +87,25 @@ pipeline {
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
+                     "raspberrypi_pico_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lto",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_cyphal",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_lto",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
+                     "px4_fmu-v5_uavcanv1",
                     "px4_fmu-v5x_default",
                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
-                     "raspberrypi_pico_default",
                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
@@ -794,7 +794,7 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'

  resetParameters()

@@ -864,15 +864,12 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
@@ -1,34 +1,32 @@
 ---
-name: 🐛 Bug report
+name: Bug report
 about: Create a report to help us improve
-labels: bug-report

 ---

-## Describe the bug
+**Describe the bug**
 A clear and concise description of the bug.

-## To Reproduce
+**To Reproduce**
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-## Expected behavior
+**Expected behavior**
 A clear and concise description of what you expected to happen.

-## Log Files and Screenshots
+**Log Files and Screenshots**
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
- Share the link to the log (Copy and paste the URL of the log)
+- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).

 Add screenshots to help explain your problem.

-## Drone (please complete the following information):
+**Drone (please complete the following information):**
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-## Additional context
+**Additional context**
 Add any other context about the problem here.
@@ -1,20 +1,19 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
-labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-## Describe problem solved by the proposed feature
+**Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-## Describe your preferred solution
+**Describe your preferred solution**
 A clear and concise description of what you want to happen.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Additional context
+**Additional context**
 Add any other context or screenshots for the feature request here.
@@ -1,13 +1,10 @@
 ---
 name: ⛔ Support Question
-about: See http://discuss.px4.io/ for questions about using PX4.
+about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.

 ---

-## Attention! Please read the note below
-
-We use GitHub issues only to discuss PX4 bugs and new features.
-
-**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
+We use GitHub issues only to discuss PX4 bugs and new features. For
+questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).

 Thanks!
@@ -1,11 +1,9 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/px4_user_guide for documentation issues
+about: See https://github.com/PX4/Devguide for documentation issues

 ---

-## Attention! Please read the note below
-
-**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
+PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).

 Thanks!
@@ -37,10 +37,8 @@ jobs:
          holybro_kakutef7,
          holybro_kakuteh7,
          holybro_pix32v5,
-          matek_gnss-m9n-f4,
-          matek_h743,
-          matek_h743-mini,
          matek_h743-slim,
+          matek_gnss-m9n-f4,
          modalai_fc-v1,
          modalai_fc-v2,
          mro_ctrl-zero-f7,
@@ -55,6 +53,7 @@ jobs:
          nxp_fmurt1062-v1,
          nxp_ucans32k146,
          omnibus_f4sd,
+          raspberrypi_pico,
          px4_fmu-v2,
          px4_fmu-v3,
          px4_fmu-v4,
@@ -64,7 +63,6 @@ jobs:
          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
-          raspberrypi_pico,
          sky-drones_smartap-airlink,
          spracing_h7extreme,
          uvify_core
@@ -36,14 +36,14 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/cyphal/libcanard"]
-	path = src/drivers/cyphal/libcanard
-	url = https://github.com/opencyphal/libcanard.git
-[submodule "src/drivers/cyphal/public_regulated_data_types"]
-	path = src/drivers/cyphal/public_regulated_data_types
-	url = https://github.com/opencyphal/public_regulated_data_types.git
-[submodule "src/drivers/cyphal/legacy_data_types"]
-	path = src/drivers/cyphal/legacy_data_types
+[submodule "src/drivers/uavcan_v1/libcanard"]
+	path = src/drivers/uavcan_v1/libcanard
+	url = https://github.com/UAVCAN/libcanard.git
+[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
+	path = src/drivers/uavcan_v1/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
+[submodule "src/drivers/uavcan_v1/legacy_data_types"]
+	path = src/drivers/uavcan_v1/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -99,7 +99,7 @@
 #
 #=============================================================================

-cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.2 FATAL_ERROR)

 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -234,14 +234,6 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)

-# Check if LTO option and check if toolchain supports it
-if(LTO)
-    include(CheckIPOSupported)
-    check_ipo_supported()
-    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
-    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif()
-
 set(package-contact "px4users@googlegroups.com")

 set(CMAKE_CXX_STANDARD 14)
@@ -51,13 +51,6 @@ menu "Toolchain"
        string "Architecture"
        default ""

-    config BOARD_LTO
-        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
-        default n
-        help
-            Enables LTO flag in linker
-            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
-
    config BOARD_FULL_OPTIMIZATION
        bool "Full optmization (O3)"
        default n
@@ -331,7 +331,7 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-## Describe problem solved by this pull request
-A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
+**Describe problem solved by this pull request**
+A clear and concise description of the problem this proposed change will solve.
 E.g. For this use case I ran into...

-## Describe your solution
+**Describe your solution**
 A clear and concise description of what you have implemented.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Test data / coverage
+**Test data / coverage**
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-## Additional context
+**Additional context**
 Add any other related context or media.
@@ -32,4 +32,3 @@
 ############################################################################

 add_subdirectory(init.d)
-add_subdirectory(mixers)
@@ -33,5 +33,4 @@

 px4_add_romfs_files(
 	rcS
-	rc.output_defaults
 )
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# UGV default parameters.
-#
-# NOTE: Script variables are declared/initialized/unset in the rcS script.
-#
-
-#
-# Enable servo output on pins 3 and 4 (steering and thrust)
-# but also include 1+2 as they form together one output group
-# and need to be set together.
-#
-set PWM_OUT 12
-
-#
-# PWM Hz - 50 Hz is the normal rate in RC cars, higher rates
-# may damage analog servos.
-#
-set PWM_MAIN_RATE 50
-
-#
-# This is the gimbal pass mixer.
-#
-set MIXER_AUX pass
-set PWM_AUX_OUT 12
-
-param set-default PWM_MAIN_DISARM 1500
-param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_MIN 1000
-
-# Set mixer
-set MIXER IO_pass_ucan
@@ -65,8 +65,8 @@ unset BOARD_RC_DEFAULTS
 #
 # Start system state indicator.
 #
-#rgbled start -X -q
-#rgbled_ncp5623c start -X -q
+rgbled start -X -q
+rgbled_ncp5623c start -X -q

 #
 # board sensors: rc.sensors
@@ -86,10 +86,10 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial

 # Check for flow sensor
-#if param compare SENS_EN_PX4FLOW 1
-#then
-#	px4flow start -X &
-#fi
+if param compare SENS_EN_PX4FLOW 1
+then
+	px4flow start -X &
+fi

-#uavcannode start
+uavcannode start
 unset R
@@ -1,36 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2018 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-px4_add_romfs_files(
-	IO_pass_ucan.main.mix
-)
@@ -1,12 +0,0 @@
-Passthrough mixer for PX4IO
-============================
-
-This file defines passthrough mixers suitable for testing.
-
-Channel group 0, channels 0-7 are passed directly through to the outputs.
-
-M: 1
-S: 0 0  10000  10000      0 -10000  10000
-
-M: 1
-S: 0 1  10000  10000      0 -10000  10000
@@ -25,8 +25,6 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3

-param set-default FW_SPOILERS_LND 0.4
-
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_CRUISE 0.25
@@ -7,11 +7,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2

@@ -9,7 +9,7 @@

 param set-default MAV_TYPE 21

-param set-default SYS_CTRL_ALLOC 1
+# param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3

 param set-default CA_ROTOR_COUNT 4
@@ -27,7 +27,9 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05

 param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_TILT 2
 param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -1,4 +1,6 @@

+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
@@ -95,9 +95,10 @@ fi

 if param compare SYS_AUTOCONFIG 1
 then
-	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
+
+	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
+	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi

 # multi-instance setup
@@ -195,6 +196,14 @@ fi

 . "$autostart_file"

+#
+# If autoconfig parameter was set, reset it and save parameters.
+#
+if [ $AUTOCNF = yes ]
+then
+	param set SYS_AUTOCONFIG 0
+fi
+
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250

@@ -55,5 +55,4 @@ px4_add_romfs_files(
 	rc.vehicle_setup
 	rc.vtol_apps
 	rc.vtol_defaults
-	rc.output_defaults
 )
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name Steadidrone QU4D
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 4
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.13
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.19
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 4
+
+set MIXER quad_w
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# @name Steadidrone MAVRIK
+#
+# @type Octo Coax Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 motor 5
+# @output MAIN6 motor 6
+# @output MAIN7 motor 7
+# @output MAIN8 motor 8
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default MC_PITCH_P 4
+param set-default MC_PITCHRATE_P 0.24
+param set-default MC_PITCHRATE_I 0.09
+param set-default MC_PITCHRATE_D 0.013
+param set-default MC_PITCHRATE_MAX 180
+
+param set-default MC_ROLL_P 4
+param set-default MC_ROLLRATE_P 0.16
+param set-default MC_ROLLRATE_I 0.07
+param set-default MC_ROLLRATE_D 0.009
+param set-default MC_ROLLRATE_MAX 180
+
+param set-default MC_YAW_P 3
+
+param set-default MPC_HOLD_MAX_XY 0.25
+param set-default MPC_THR_MIN 0.15
+param set-default MPC_Z_VEL_MAX_DN 2
+
+param set-default BAT1_N_CELLS 4
+
+set MIXER octo_cox_w
+
+set PWM_OUT 12345678
@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# @name CruiseAder Claire
+#
+# @type VTOL Tiltrotor
+# @class VTOL
+#
+# @maintainer Samay Siga <samay_s@icloud.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default MAV_TYPE 21
+
+param set-default PWM_AUX_DISARM 1000
+param set-default PWM_AUX_MAX 2000
+param set-default PWM_AUX_MIN 1000
+param set-default PWM_AUX_RATE 50
+
+param set-default PWM_MAIN_MAX 2000
+
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 13
+param set-default VT_IDLE_PWM_MC 1080
+param set-default VT_TILT_FW 0.9
+param set-default VT_TILT_MC 0.08
+param set-default VT_TILT_TRANS 0.5
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 1
+
+set MIXER claire
+set MIXER_AUX claire
+
+set PWM_OUT 1234
@@ -69,9 +69,4 @@ param set-default VT_TYPE 1

 set MIXER vtol_convergence

-if ! ver hwcmp MATEK_H743
-then
-	set PWM_OUT 1234
-else
-	set PWM_OUT 3456
-fi	
+set PWM_OUT 1234
@@ -131,6 +131,7 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
+param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4

@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Output
-#
-# @maintainer
-#
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.output_defaults
-
-
-# Provide ESC a constant 1500 us pulse
-param set-default PWM_MAIN_DISARM 1500
-param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_MIN 1000
-
-# Set mixer
-set MIXER IO_pass
-
-set PWM_OUT 12
@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name IO Camflyer
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MAX 15
+param set-default FW_AIRSPD_TRIM 13
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_DAMPING 0.74
+param set-default FW_L1_PERIOD 16
+param set-default FW_LND_ANG 15
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_PR_FF 0.35
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_P 0.04
+
+param set-default PWM_MAIN_DISARM 1000
+
+
+set MIXER fw_generic_wing
+
+# Provide ESC a constant 1000 us pulse while disarmed
+set PWM_OUT 4
@@ -0,0 +1,29 @@
+#!/bin/sh
+#
+# @name FX-79 Buffalo Flying Wing
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 right aileron
+# @output MAIN2 left aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MAX 30
+param set-default FW_AIRSPD_MIN 13
+
+param set-default NAV_LOITER_RAD 150
+
+set MIXER fw_generic_wing
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Viper
+#
+# @type Flying Wing
+# @class Plane
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+set MIXER Viper
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# @name Modified Parrot Disco
+#
+# @url
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+####################################
+# Airspeed
+####################################
+param set-default FW_AIRSPD_MAX  27 # = 52 knots
+
+####################################
+# Pitch
+####################################
+
+# Pitch rate feed forward (def = 0.5 %/rad/sec)
+param set-default FW_PR_FF 0.35
+
+####################################
+# Roll
+####################################
+
+# Basic limits (def = 50 deg)
+param set-default FW_R_LIM 40
+
+# Roll rate upper limit (def = 70 deg/s)
+param set-default FW_R_RMAX 50
+
+param set-default PWM_MAIN_DISARM 1000
+
+set MIXER fw_generic_wing.main.mix
+
+# Provide ESC a constant 1000 us pulse
+set PWM_OUT 4
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# @name DJI F330 w/ DJI ESCs
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.05
+
+
+# DJI ESCs do not support calibration and need a higher min
+param set-default PWM_MAIN_MIN 1230
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# @name DJI F450 w/ DJI ESCs
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_YAWRATE_P 0.3
+
+# DJI ESCs do not support calibration and need a higher min
+param set-default PWM_MAIN_MIN 1230
@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# @name DJI Matrice 100
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer James Goppert <james.goppert@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 6
+
+param set-default MC_ROLLRATE_P 0.05
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.001
+param set-default MC_PITCHRATE_P 0.05
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.001
+
+param set-default MC_YAWRATE_I 0
+
+param set-default PWM_MAIN_MIN 1200
@@ -52,16 +52,22 @@ px4_add_romfs_files(

 	# [3000, 3999] Flying wing"
 	3000_generic_wing
+	3030_io_camflyer
 	3031_phantom
 	3032_skywalker_x5
 	3033_wingwing
+	3034_fx79
+	3035_viper
 	3036_pigeon
+	3037_parrot_disco_mod
 	3100_tbs_caipirinha

 	# [4000, 4999] Quadrotor x"
 	4001_quad_x
 	4003_qavr5
 	4009_qav250
+	4010_dji_f330
+	4011_dji_f450
 	4014_s500
 	4015_holybro_s500
 	4016_holybro_px4vision
@@ -75,6 +81,7 @@ px4_add_romfs_files(
 	4051_s250aq
 	4052_holybro_qav250
 	4053_holybro_kopis2
+	4060_dji_matrice_100
 	4061_atl_mantis_edu
 	4071_ifo
 	4072_draco
@@ -105,6 +112,7 @@ px4_add_romfs_files(
 	# [10000, 10999] Quadrotor Wide arm / H frame"
 	10015_tbs_discovery
 	10016_3dr_iris
+	10017_steadidrone_qu4d
 	10018_tbs_endurance

 	# [11000, 11999] Hexa Cox
@@ -112,6 +120,7 @@ px4_add_romfs_files(

 	# [12000, 12999] Octo Cox
 	12001_octo_cox
+	12002_steadidrone_mavrik

 	# [13000, 13999] VTOL
 	13000_generic_vtol_standard
@@ -124,6 +133,7 @@ px4_add_romfs_files(
 	13007_vtol_AAVVT_quad
 	13008_QuadRanger
 	13009_vtol_spt_ranger
+	13010_claire
 	13012_convergence
 	13013_deltaquad
 	13014_vtol_babyshark
@@ -147,7 +157,7 @@ px4_add_romfs_files(
 	18001_TF-B1

 	# [22000, 22999] Reserve for custom models
-	22222_generic_output
+
 	24001_dodeca_cox

 	50000_generic_ground_vehicle
@@ -1,25 +0,0 @@
-#!/bin/sh
-#
-# UGV default parameters.
-#
-# NOTE: Script variables are declared/initialized/unset in the rcS script.
-#
-
-#
-# Enable servo output on pins 3 and 4 (steering and thrust)
-# but also include 1+2 as they form together one output group
-# and need to be set together.
-#
-set PWM_OUT 12
-
-#
-# PWM Hz - 50 Hz is the normal rate in RC cars, higher rates
-# may damage analog servos.
-#
-set PWM_MAIN_RATE 50
-
-#
-# This is the gimbal pass mixer.
-#
-set MIXER_AUX pass
-set PWM_AUX_OUT 12
@@ -21,6 +21,7 @@ set +e
 # it wastes flash
 #
 set R /
+set AUTOCNF no
 set FCONFIG /fs/microsd/etc/config.txt
 set FEXTRAS /fs/microsd/etc/extras.txt
 set FRC /fs/microsd/etc/rc.txt
@@ -176,12 +177,13 @@ else
 	fi

 	#
-	# If the airframe has been previously reset SYS_AUTCONFIG will have been set to 1 and other params will be reset on the next boot.
+	# Set AUTOCNF flag to use it in AUTOSTART scripts.
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-		param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
+		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
+		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
+		set AUTOCNF yes
 	fi

 	#
@@ -272,6 +274,14 @@ else
 		. $FCONFIG
 	fi

+	#
+	# If autoconfig parameter was set, reset it and save parameters.
+	#
+	if [ $AUTOCNF = yes ]
+	then
+		param set SYS_AUTOCONFIG 0
+	fi
+
 	#
 	# Check if UAVCAN is enabled, default to it for ESCs.
 	#
@@ -288,9 +298,9 @@ else
 			tune_control play error
 		fi
 	else
-		if param greater -s CYPHAL_ENABLE 0
+		if param greater -s UAVCAN_V1_ENABLE 0
 		then
-			cyphal start
+			uavcan_v1 start
 		fi
 	fi

@@ -555,6 +565,7 @@ fi
 # Unset all script parameters to free RAM.
 #
 unset R
+unset AUTOCNF
 unset FCONFIG
 unset FEXTRAS
 unset FRC
@@ -21,16 +21,14 @@ O:      10000  10000      0 -10000  10000
 S: 0 3      0  20000 -10000 -10000  10000

 # mixer for the left aileron
-M: 2
+M: 1
 O:      10000  10000   0 -10000  10000
 S: 0 0  -10000  -10000    0 -10000  10000
-S: 0 5   10000   10000    0 -10000  10000

 # mixer for the right aileron
-M: 2
+M: 1
 O:      10000  10000   0 -10000  10000
 S: 0 0  10000  10000    0 -10000  10000
-S: 0 5  10000  10000    0 -10000  10000

 # mixer for the elevator
 M: 1
@@ -8,22 +8,22 @@ R: 4x
 # tilt servo motor 1
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # tilt servo motor 2
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # tilt servo motor 3
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # tilt servo motor 4
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # mixer for the left aileron
 M: 1
@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -20,11 +20,11 @@ endpoints to suit.

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 Elevator mixer
 ------------
@@ -11,7 +11,7 @@ to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,11 +21,11 @@ endpoints to suit.

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -9,20 +9,20 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw), 3 (thrust) 4 (flaps), 5 (spoiler).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up mechanically reversed.

 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -40,6 +40,8 @@ px4_add_romfs_files(
 	babyshark.main.mix
 	blade130.main.mix
 	CCPM.main.mix
+	claire.aux.mix
+	claire.main.mix
 	cloudship.main.mix
 	coax.main.mix
 	delta.main.mix
@@ -81,6 +83,7 @@ px4_add_romfs_files(
 	tri_y_yaw-.main.mix
 	uuv_x.main.mix
 	vectored6dof.main.mix
+	Viper.main.mix
 	vtol_AAERT.aux.mix
 	vtol_AAVVT.aux.mix
 	vtol_TTTTAAER.aux.mix
@@ -0,0 +1,66 @@
+Viper Delta-wing mixer
+=================================
+# @board px4_fmu-v2 exclude
+
+Designed for Viper.
+
+TODO (sjwilks): Add mixers for flaps.
+
+This file defines mixers suitable for controlling a delta wing aircraft using
+PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
+servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
+assumed to be unused.
+
+Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
+(roll), 1 (pitch) and 3 (thrust).
+
+See the README for more information on the scaler format.
+
+Elevon mixers
+-------------
+Three scalers total (output, roll, pitch).
+
+On the assumption that the two elevon servos are physically reversed, the pitch
+input is inverted between the two servos.
+
+The scaling factor for roll inputs is adjusted to implement differential travel
+for the elevons.
+
+M: 2
+S: 0 0   7500   7500      0 -10000  10000
+S: 0 1   8000   8000      0 -10000  10000
+
+M: 2
+S: 0 0   7500   7500      0 -10000  10000
+S: 0 1  -8000  -8000      0 -10000  10000
+
+Output 2
+--------
+This mixer is empty.
+
+Z:
+
+Motor speed mixer
+-----------------
+Two scalers total (output, thrust).
+
+This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
+range.  Inputs below zero are treated as zero.
+
+M: 1
+S: 0 3      0  20000 -10000 -10000  10000
+
+Inputs to the mixer come from channel group 2 (payload), channels 0
+(bay servo 1), 1 (bay servo 2) and 3 (drop release).
+-----------------------------------------------------
+
+M: 1
+S: 2 0  10000  10000      0 -10000  10000
+
+M: 1
+S: 2 1  10000  10000      0 -10000  10000
+
+M: 1
+S: 2 2  -8000  -8000      0 -10000  10000
+
+
@@ -0,0 +1,28 @@
+# mixer for the CruiseAder Claire tilt mechansim servo and elevons
+
+=======================================================================
+
+
+Tilt mechanism servo mixer
+
+---------------------------
+
+M: 1
+
+
+S: 1 4  10000  10000      0 -10000  10000
+
+
+
+Elevon mixers
+
+-------------
+
+M: 2
+
+S: 1 0   7500   7500      0 -10000  10000
+S: 1 1   7500   7500      0 -10000  10000
+
+M: 2
+S: 1 0    7500    7500    0 -10000  10000
+S: 1 1   -7500   -7500    0 -10000  10000
@@ -0,0 +1,8 @@
+# CruiseAder Claire Main Multirotor mixer for PX4FMU
+# @board px4_fmu-v2 exclude
+
+#
+
+#===========================
+
+R: 4x
@@ -6,7 +6,7 @@
 Tilt mechanism servo mixer
 ---------------------------
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 Elevon mixers
 -------------
@@ -5,14 +5,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU

 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU
+The configuration assumes the aileron servos are connected to PX4FMU 
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,11 +22,11 @@ endpoints to suit.

 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 5  10000  10000      0 -10000  10000
+S: 1 6  10000  10000      0 -10000  10000

 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 5 -10000 -10000      0 -10000  10000
+S: 1 6 -10000 -10000      0 -10000  10000


 V-tail mixers
@@ -6,19 +6,19 @@
 ---------------------------
 # front left up:2000 down:1000
 M: 1
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000

 # front right up:1000 down:2000
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # rear left up:2000 down:1000
 M: 1
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000

 # rear right up:1000 down:2000
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000


 # Aileron mixer
@@ -10,12 +10,12 @@ Tilt mechanism servo mixer
 ---------------------------
 #RIGHT up:2000 down:1000
 M: 2
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 Elevon mixers
@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 Elevator mixer
 ------------
@@ -9,9 +9,9 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,12 +22,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0 -20000   9000 -10000  10000
+S: 1 4      0 -20000   9000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000  -10000 -10000  10000
+S: 1 4      0  20000  -10000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000

 Elevon mixers
@@ -3,14 +3,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU

 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU
+The configuration assumes the aileron servos are connected to PX4FMU 
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 5  10000  10000      0 -10000  10000
+S: 1 6  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 5 -10000 -10000      0 -10000  10000
+S: 1 6 -10000 -10000      0 -10000  10000


 V-tail mixers
@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 Elevon mixers
@@ -13,7 +13,8 @@ exec find boards msg src platforms test \
    -path platforms/qurt/dspal -prune -o \
    -path src/drivers/uavcan/libuavcan -prune -o \
    -path src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis -prune -o \
-    -path src/drivers/cyphal/libcanard -prune -o \
+    -path src/drivers/uavcan_v1/libcanard -prune -o \
+    -path src/drivers/uavcannode_gps_demo/libcanard -prune -o \
    -path src/lib/crypto/monocypher -prune -o \
    -path src/lib/events/libevents -prune -o \
    -path src/lib/parameters/uthash -prune -o \
@@ -1,7 +0,0 @@
-if SWD
-speed 1000
-r
-loadbin /Users/landon/git/px4/build/nxp_ucans32k146_nxp_demo/deploy/34.bin,0x6000
-r
-g
-q
@@ -1,3 +0,0 @@
-#!/bin/zsh
-
-JLinkExe -device S32K146 -CommandFile /Users/landon/git/px4/Tools/flash_nxp/flash_ucan.jlink
@@ -200,12 +200,13 @@ if [[ $INSTALL_SIM == "true" ]]; then

 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		java_version=11
+		gazebo_version=9
 	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		java_version=13
-	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		java_version=11
+		gazebo_version=11
 	else
 		java_version=14
+		gazebo_version=11
 	fi
 	# Java (jmavsim or fastrtps)
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -219,30 +220,20 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")

 	# Gazebo
-	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-		gazebo_version=9
-		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
-	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		gazebo_packages="gazebo libgazebo-dev"
-	else
-		# default and Ubuntu 20.04
-		gazebo_version=11
-		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
-	fi
-
 	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 	# Update list, since new gazebo-stable.list has been added
 	sudo apt-get update -y --quiet
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		dmidecode \
-		$gazebo_packages \
+		gazebo$gazebo_version \
 		gstreamer1.0-plugins-bad \
 		gstreamer1.0-plugins-base \
 		gstreamer1.0-plugins-good \
 		gstreamer1.0-plugins-ugly \
 		gstreamer1.0-libav \
 		libeigen3-dev \
+		libgazebo$gazebo_version-dev \
 		libgstreamer-plugins-base1.0-dev \
 		libimage-exiftool-perl \
 		libopencv-dev \
@@ -130,8 +130,7 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDIO_BLOCKSETUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -174,7 +173,7 @@ CONFIG_STM32_SPI1=y
 CONFIG_STM32_SPI2=y
 CONFIG_STM32_SPI4=y
 CONFIG_STM32_SPI4_DMA=y
-CONFIG_STM32_SPI4_DMA_BUFFER=1024
+CONFIG_STM32_SPI4_DMA_BUFFER=512
 CONFIG_STM32_SPI_DMA=y
 CONFIG_STM32_SPI_DMATHRESHOLD=8
 CONFIG_STM32_TIM10=y
@@ -105,8 +105,7 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -107,8 +107,7 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -107,8 +107,7 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -107,8 +107,7 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -140,8 +140,7 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -162,8 +162,7 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -126,8 +126,7 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -125,8 +125,7 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -108,8 +108,7 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -139,8 +139,7 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -111,6 +111,7 @@ MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
 	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
+
 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
 	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
@@ -186,7 +187,12 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-	} > AXI_SRAM AT > FLASH
+
+		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
+		. = ALIGN(16);
+		FILL(0xffff)
+		. += 16;
+	} > AXI_SRAM AT > FLASH  = 0xffff

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -138,8 +138,7 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -111,6 +111,7 @@ MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
 	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
+
 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
 	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
@@ -186,7 +187,12 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-	} > AXI_SRAM AT > FLASH
+
+		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
+		. = ALIGN(16);
+		FILL(0xffff)
+		. += 16;
+	} > AXI_SRAM AT > FLASH  = 0xffff

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -4,7 +4,6 @@ CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_RPM=n
-CONFIG_DRIVERS_UAVCAN=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
 CONFIG_MODULES_ROVER_POS_CONTROL=n
@@ -140,8 +140,7 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -187,7 +187,12 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-	} > AXI_SRAM AT > FLASH
+
+		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
+		. = ALIGN(16);
+		FILL(0xffff)
+		. += 16;
+	} > AXI_SRAM AT > FLASH  = 0xffff

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -138,8 +138,7 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -4,7 +4,6 @@ CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_RPM=n
-CONFIG_DRIVERS_UAVCAN=n
 CONFIG_EXAMPLES_FAKE_GPS=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
@@ -141,8 +141,7 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -4,7 +4,7 @@ CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_EXTERNAL_METADATA=y
-CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
@@ -23,10 +23,10 @@ CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_EKF2=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
 CONFIG_MODULES_MC_ATT_CONTROL=y
@@ -120,8 +120,7 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -158,7 +157,7 @@ CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32_SPI1=y
 CONFIG_STM32_SPI1_DMA=y
-CONFIG_STM32_SPI1_DMA_BUFFER=1024
+CONFIG_STM32_SPI1_DMA_BUFFER=512
 CONFIG_STM32_SPI2=y
 CONFIG_STM32_SPI2_DMA=y
 CONFIG_STM32_SPI3=y
@@ -122,8 +122,7 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -108,8 +108,7 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -140,8 +140,7 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -109,16 +109,17 @@

 MEMORY
 {
-	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	flash (rx)  : ORIGIN = 0x08020000, LENGTH = 1920K
-	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
-	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
-	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
-	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
-	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
-	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
+
+	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
+	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
+	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
+	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
 }

 OUTPUT_ARCH(arm)
@@ -156,7 +157,7 @@ SECTIONS
 		*(.gnu.linkonce.r.*)
 		_etext = ABSOLUTE(.);

-	} > flash
+	} > FLASH

 	/*
 	 * Init functions (static constructors and the like)
@@ -165,17 +166,17 @@ SECTIONS
 		_sinit = ABSOLUTE(.);
 		KEEP(*(.init_array .init_array.*))
 		_einit = ABSOLUTE(.);
-	} > flash
+	} > FLASH


 	.ARM.extab : {
 		*(.ARM.extab*)
-	} > flash
+	} > FLASH

 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)
-	} > flash
+	} > FLASH
 	__exidx_end = ABSOLUTE(.);

 	_eronly = ABSOLUTE(.);
@@ -186,7 +187,12 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-	} > sram AT > flash
+
+		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
+		. = ALIGN(16);
+		FILL(0xffff)
+		. += 16;
+	} > AXI_SRAM AT > FLASH  = 0xffff

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -195,7 +201,7 @@ SECTIONS
 		*(COMMON)
 		. = ALIGN(4);
 		_ebss = ABSOLUTE(.);
-	} > sram
+	} > AXI_SRAM

 	/* Emit the the D3 power domain section for locating BDMA data */

@@ -204,7 +210,7 @@ SECTIONS
 		*(.sram4)
 		. = ALIGN(4);
 		_sram4_heap_start = ABSOLUTE(.);
-	} > sram4
+	} > SRAM4

 	/* Stabs debugging sections. */
 	.stab 0 : { *(.stab) }
@@ -31,6 +31,7 @@ CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_MIXER=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PWM=y
@@ -140,8 +140,7 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -30,7 +30,7 @@ CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x0050
+CONFIG_CDCACM_PRODUCTID=0x004b
 CONFIG_CDCACM_PRODUCTSTR="PX4 BL Holybro KakuteH7"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Daniel Agar	0bddca6b9b	boards: NuttX update all boards to preallocated sem holder list - CONFIG_SEM_PREALLOCHOLDERS=32 - CONFIG_SEM_NNESTPRIO=16 (default)	2022-05-29 13:49:01 -04:00
Daniel Agar	c50c1e3982	update NuttX and apps to latest with sem holder fixes and updated ostest	2022-05-29 13:48:15 -04:00
Daniel Agar	a249b77647	boards: reduce SPI DMA buffers on older STM32F4 boards - on common IMUs like the mpu6000, mpu9250, icm20602, etc each FIFO sample is only 12 bytes so this is still more than large enough for the worst case transfer	2022-05-27 16:28:26 -04:00
Daniel Agar	17de164e95	boards: pixhawk 2 cube skip starting low quality l3gd20 gyro to save memory and cpu - free memory is getting tight on these older boards (depending on configuratoin) and the pixhawk 2 cube still has 2 other superior IMUs, so this is just dropping dead weight	2022-05-27 16:28:22 -04:00
David Sidrane	a057b38c40	Update all H7 Bootloders	2022-05-27 14:52:00 -04:00
David Sidrane	39e53711d5	flash_cache:Flush complete cache line	2022-05-27 14:44:54 -04:00
David Sidrane	1294851bb6	boards: STM32H7 pad to 256 bit - 32 bytes (#19724 )	2022-05-27 14:44:51 -04:00
David Sidrane	1c15a1a7f4	px4_fmu-v6c:Fix mag rotation	2022-05-27 14:43:47 -04:00
David Sidrane	21567ca187	boards: new px4_fmu-v6c board support (#19544 )	2022-05-27 14:42:55 -04:00
bresch	8e789bcc7f	ekf2_post-processing: use estimator_status_flags instead of bitmasks	2022-05-24 10:30:52 -04:00
Julian Oes	d699d5f27e	sitl_gazebo: update submodule This fixes the issue where HITL doesn't connect over USB.	2022-05-24 09:43:05 -04:00
Julian Oes	4ae97c505f	commander: lockdown is not termination We use lockdown to prevent outputs like motors and servos from being active in HITL simulation. This means that we can't treat the lockdown flag as a flight_terminated, otherwise we can't arm in HITL at all.	2022-05-24 09:42:38 -04:00
Daniel Agar	b8ce2a6039	icm42688p: only check configured registers periodically (as intended)	2022-05-23 14:58:37 -04:00
bresch	1f399e5b33	ekf2: use explicit flags instead of bitmask position This prevents bitmask mismatch when a new flag is inserted	2022-05-23 14:57:17 -04:00
Serhat Aksun	d67cddae7d	sensors/vehicle_magnetometer: fix multi_mode check Signed-off-by: Serhat Aksun <serhat.aksun@maxwell-innovations.com>	2022-05-23 10:10:22 -04:00
Julian Oes	0290282b17	ROMFS: disable UAVCAN in HITL Without this, uavcan creates MixingOutput classes which then create empty actuator_outputs publications. This then prevents the motor output in HITL to be forwarded to the simulator via mavlink.	2022-05-22 10:27:07 -04:00
Nicolas MARTIN	39d1c79f48	HITL: undefined time_remaining_s should be NAN	2022-05-20 09:40:28 -04:00
Nico van Duijn	ad410a2512	Commander: ignore MAV_CMD_REQUEST_MSG This commit adds the MAV_CMD_REQUEST_MESSAGE to the list of vehicle commands which are ignored without generating a warning sound.	2022-05-20 09:40:22 -04:00
Daniel Agar	453acdce31	.vscode/.gitignore ignore all log files	2022-05-20 09:40:07 -04:00
Beat Küng	afb2538da3	output drivers: init SmartLock after exit_and_cleanup This fixes an invalid memory access when exiting the module: exit_and_cleanup destroys the object, but lock_guard is destructed after and accesses the lock.	2022-05-12 08:17:15 -04:00
alexklimaj	af58c412c3	Fix uavcan battery causing immediate RTL time remaining low	2022-05-11 21:49:13 -04:00
Daniel Agar	d5226b28ce	drivers/rc_input: ensure RC inversion is disabled initially and latch RC_INPUT_PROTO conservatively - this allows jumping straight to a non-SBUS RC protocol - increased the scan time per protocol 300->500 ms, which the newer DSM parser seems to need in some cases. - only set RC_INPUT_PROTO if we've had a successful RC lock for > 3 seconds	2022-05-11 14:31:51 -04:00
Beat Küng	b091ea9fd9	log_writer_file: fix corner case when mission log is enabled Normally _should_run for mission is only ever true if _should_run for the normal log is. There are exceptions though: - the log buffer fails to allocate - there was a write failure (e.g. due to SD card removal) In that situation, the writer would not wait anymore but busy-loop.	2022-05-11 10:07:46 -04:00
Beat Küng	9e91ca8294	log_writer_file: protect access to _should_run, use px4::atomicbool for _exit_thread	2022-05-11 10:07:46 -04:00
Igor Mišić	8302f076e7	uavcan: use timer 6 by default on stm32f7	2022-05-10 12:43:26 -04:00
Thomas Stastny	de26ffa6e0	fw pos ctrl: turn back to takeoff point with npfg	2022-05-06 13:08:07 -04:00
Thomas Stastny	f60d38db65	fw pos ctrl: add missing guidance control interval setting to control_manual_position()	2022-05-06 13:08:07 -04:00
Thomas Stastny	5e3c8d2fa0	fw pos ctrl: fix state switching logic for takeoff and landing	2022-05-06 13:08:07 -04:00
Matthias Grob	90998837ec	Commander: ensure diconnected battery is cleared from bit field	2022-05-06 10:46:40 -04:00
Beat Küng	8cff9a1e04	commander: fix incorrect return in set_link_loss_nav_state() If both local position and altitude were not valid, then both RC loss and datalink loss would not trigger any failsafe at all, independently from the configured action.	2022-05-06 10:15:30 -04:00
bresch	f8ff34f82d	ekf2: optimize KHP computation Calculating K(HP) takes less operations than (KH)P because K and H are vectors. Without considering the sparsity optimization: - KH (2424 operations) is then a 24x24 matrix an it takes 24^3 operations to multiply it with P. Total: 14400 op - HP (24(24+24-1) operations) is a row vector and it takes 24 operations to left-multiply it by K. Total:1152 op	2022-05-06 10:15:26 -04:00
Beat Küng	e69d9ec48f	dshot: avoid using pwm failsafe params when dynamic mixing is enabled	2022-05-02 11:43:51 +02:00
Beat Küng	f033e164fe	fix dshot: remove setAllFailsafeValues Fixes a regression from `c1e5e666f0`, where with static mixers the dshot outputs would go to max instead of 0 in a failsafe case.	2022-04-28 13:29:40 -04:00
Daniel Agar	41191765ad	drivers/rc_input: RC_INPUT_PROTO parameter minimal implementation (#19539 ) Co-authored-by: chris1seto <chris12892@gmail.com> Co-authored-by: chris1seto <chris12892@gmail.com>	2022-04-28 13:27:15 -04:00