Add BATTERY_CELL_VOLTAGES streaming

Update to RFC with capacity_ fields
Update mavlink dev branch to latest
2026-06-06 12:10:09 +08:00 · 2022-06-02 16:18:43 +10:00 · 2022-06-02 14:33:01 +10:00 · 2022-06-02 14:20:42 +10:00 · 2022-06-01 16:38:57 +10:00 · 2022-05-22 22:21:04 +10:00
206 changed files with 7736 additions and 13502 deletions
@@ -105,7 +105,6 @@ pipeline {
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
                     "px4_fmu-v5x_default",
-                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
@@ -794,7 +794,7 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'

  resetParameters()

@@ -864,15 +864,12 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
@@ -1,34 +1,32 @@
 ---
-name: 🐛 Bug report
+name: Bug report
 about: Create a report to help us improve
-labels: bug-report

 ---

-## Describe the bug
+**Describe the bug**
 A clear and concise description of the bug.

-## To Reproduce
+**To Reproduce**
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-## Expected behavior
+**Expected behavior**
 A clear and concise description of what you expected to happen.

-## Log Files and Screenshots
+**Log Files and Screenshots**
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
- Share the link to the log (Copy and paste the URL of the log)
+- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).

 Add screenshots to help explain your problem.

-## Drone (please complete the following information):
+**Drone (please complete the following information):**
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-## Additional context
+**Additional context**
 Add any other context about the problem here.
@@ -1,20 +1,19 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
-labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-## Describe problem solved by the proposed feature
+**Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-## Describe your preferred solution
+**Describe your preferred solution**
 A clear and concise description of what you want to happen.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Additional context
+**Additional context**
 Add any other context or screenshots for the feature request here.
@@ -1,13 +1,10 @@
 ---
 name: ⛔ Support Question
-about: See http://discuss.px4.io/ for questions about using PX4.
+about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.

 ---

-## Attention! Please read the note below
-
-We use GitHub issues only to discuss PX4 bugs and new features.
-
-**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
+We use GitHub issues only to discuss PX4 bugs and new features. For
+questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).

 Thanks!
@@ -1,11 +1,9 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/px4_user_guide for documentation issues
+about: See https://github.com/PX4/Devguide for documentation issues

 ---

-## Attention! Please read the note below
-
-**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
+PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).

 Thanks!
@@ -61,7 +61,6 @@ jobs:
          px4_fmu-v4pro,
          px4_fmu-v5,
          px4_fmu-v5x,
-          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
          raspberrypi_pico,
@@ -325,7 +325,6 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
-	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
 	# cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-## Describe problem solved by this pull request
-A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
+**Describe problem solved by this pull request**
+A clear and concise description of the problem this proposed change will solve.
 E.g. For this use case I ran into...

-## Describe your solution
+**Describe your solution**
 A clear and concise description of what you have implemented.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Test data / coverage
+**Test data / coverage**
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-## Additional context
+**Additional context**
 Add any other related context or media.
@@ -32,4 +32,3 @@
 ############################################################################

 add_subdirectory(init.d)
-add_subdirectory(mixers)
@@ -33,5 +33,4 @@

 px4_add_romfs_files(
 	rcS
-	rc.output_defaults
 )
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# UGV default parameters.
-#
-# NOTE: Script variables are declared/initialized/unset in the rcS script.
-#
-
-#
-# Enable servo output on pins 3 and 4 (steering and thrust)
-# but also include 1+2 as they form together one output group
-# and need to be set together.
-#
-set PWM_OUT 12
-
-#
-# PWM Hz - 50 Hz is the normal rate in RC cars, higher rates
-# may damage analog servos.
-#
-set PWM_MAIN_RATE 50
-
-#
-# This is the gimbal pass mixer.
-#
-set MIXER_AUX pass
-set PWM_AUX_OUT 12
-
-param set-default PWM_MAIN_DISARM 1500
-param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_MIN 1000
-
-# Set mixer
-set MIXER IO_pass_ucan
@@ -65,8 +65,8 @@ unset BOARD_RC_DEFAULTS
 #
 # Start system state indicator.
 #
-#rgbled start -X -q
-#rgbled_ncp5623c start -X -q
+rgbled start -X -q
+rgbled_ncp5623c start -X -q

 #
 # board sensors: rc.sensors
@@ -86,10 +86,10 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial

 # Check for flow sensor
-#if param compare SENS_EN_PX4FLOW 1
-#then
-#	px4flow start -X &
-#fi
+if param compare SENS_EN_PX4FLOW 1
+then
+	px4flow start -X &
+fi

-#uavcannode start
+uavcannode start
 unset R
@@ -1,36 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2018 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-px4_add_romfs_files(
-	IO_pass_ucan.main.mix
-)
@@ -1,12 +0,0 @@
-Passthrough mixer for PX4IO
-============================
-
-This file defines passthrough mixers suitable for testing.
-
-Channel group 0, channels 0-7 are passed directly through to the outputs.
-
-M: 1
-S: 0 0  10000  10000      0 -10000  10000
-
-M: 1
-S: 0 1  10000  10000      0 -10000  10000
@@ -95,9 +95,10 @@ fi

 if param compare SYS_AUTOCONFIG 1
 then
-	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
+
+	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
+	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi

 # multi-instance setup
@@ -195,6 +196,14 @@ fi

 . "$autostart_file"

+#
+# If autoconfig parameter was set, reset it and save parameters.
+#
+if [ $AUTOCNF = yes ]
+then
+	param set SYS_AUTOCONFIG 0
+fi
+
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250

@@ -55,5 +55,4 @@ px4_add_romfs_files(
 	rc.vehicle_setup
 	rc.vtol_apps
 	rc.vtol_defaults
-	rc.output_defaults
 )
@@ -61,8 +61,6 @@ param set-default HIL_ACT_FUNC6 400

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -15,8 +15,6 @@ set MIXER quad_x

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_ROTOR0_PY 0.15
@@ -94,8 +94,6 @@ param set-default HIL_ACT_FUNC8 203

 param set SYS_HITL 1

-param set UAVCAN_ENABLE 0
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Output
-#
-# @maintainer
-#
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.output_defaults
-
-
-# Provide ESC a constant 1500 us pulse
-param set-default PWM_MAIN_DISARM 1500
-param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_MIN 1000
-
-# Set mixer
-set MIXER IO_pass
-
-set PWM_OUT 12
@@ -147,7 +147,7 @@ px4_add_romfs_files(
 	18001_TF-B1

 	# [22000, 22999] Reserve for custom models
-	22222_generic_output
+
 	24001_dodeca_cox

 	50000_generic_ground_vehicle
@@ -1,25 +0,0 @@
-#!/bin/sh
-#
-# UGV default parameters.
-#
-# NOTE: Script variables are declared/initialized/unset in the rcS script.
-#
-
-#
-# Enable servo output on pins 3 and 4 (steering and thrust)
-# but also include 1+2 as they form together one output group
-# and need to be set together.
-#
-set PWM_OUT 12
-
-#
-# PWM Hz - 50 Hz is the normal rate in RC cars, higher rates
-# may damage analog servos.
-#
-set PWM_MAIN_RATE 50
-
-#
-# This is the gimbal pass mixer.
-#
-set MIXER_AUX pass
-set PWM_AUX_OUT 12
@@ -21,6 +21,7 @@ set +e
 # it wastes flash
 #
 set R /
+set AUTOCNF no
 set FCONFIG /fs/microsd/etc/config.txt
 set FEXTRAS /fs/microsd/etc/extras.txt
 set FRC /fs/microsd/etc/rc.txt
@@ -176,12 +177,13 @@ else
 	fi

 	#
-	# If the airframe has been previously reset SYS_AUTCONFIG will have been set to 1 and other params will be reset on the next boot.
+	# Set AUTOCNF flag to use it in AUTOSTART scripts.
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-		param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
+		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
+		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
+		set AUTOCNF yes
 	fi

 	#
@@ -272,6 +274,14 @@ else
 		. $FCONFIG
 	fi

+	#
+	# If autoconfig parameter was set, reset it and save parameters.
+	#
+	if [ $AUTOCNF = yes ]
+	then
+		param set SYS_AUTOCONFIG 0
+	fi
+
 	#
 	# Check if UAVCAN is enabled, default to it for ESCs.
 	#
@@ -555,6 +565,7 @@ fi
 # Unset all script parameters to free RAM.
 #
 unset R
+unset AUTOCNF
 unset FCONFIG
 unset FEXTRAS
 unset FRC
@@ -11,7 +11,7 @@ from pyulog import ULog
 from analysis.detectors import InAirDetector, PreconditionError
 from analysis.metrics import calculate_ecl_ekf_metrics
 from analysis.checks import perform_ecl_ekf_checks
-from analysis.post_processing import get_gps_check_fail_flags
+from analysis.post_processing import get_estimator_check_flags

 def analyse_ekf(
        ulog: ULog, check_levels: Dict[str, float], multi_instance: int = 0,
@@ -40,11 +40,6 @@ def analyse_ekf(
    except:
        raise PreconditionError('could not find estimator_status instance', multi_instance)

-    try:
-        estimator_status_flags = ulog.get_dataset('estimator_status_flags', multi_instance).data
-    except:
-        raise PreconditionError('could not find estimator_status_flags instance', multi_instance)
-
    try:
        _ = ulog.get_dataset('estimator_innovations', multi_instance).data
    except:
@@ -66,14 +61,14 @@ def analyse_ekf(
        'in_air_transition_time': round(in_air.take_off + in_air.log_start, 2),
        'on_ground_transition_time': round(in_air.landing + in_air.log_start, 2)}

-    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
+    control_mode, innov_flags, gps_fail_flags = get_estimator_check_flags(estimator_status)

    sensor_checks, innov_fail_checks = find_checks_that_apply(
-        estimator_status_flags, estimator_status,
+        control_mode, estimator_status,
        pos_checks_when_sensors_not_fused=pos_checks_when_sensors_not_fused)

    metrics = calculate_ecl_ekf_metrics(
-        ulog, estimator_status_flags, innov_fail_checks, sensor_checks, in_air, in_air_no_ground_effects,
+        ulog, innov_flags, innov_fail_checks, sensor_checks, in_air, in_air_no_ground_effects,
        multi_instance, red_thresh=red_thresh, amb_thresh=amb_thresh)

    check_status, master_status = perform_ecl_ekf_checks(
@@ -83,12 +78,12 @@ def analyse_ekf(


 def find_checks_that_apply(
-    estimator_status_flags: dict, estimator_status: dict, pos_checks_when_sensors_not_fused: bool = False) ->\
+    control_mode: dict, estimator_status: dict, pos_checks_when_sensors_not_fused: bool = False) ->\
        Tuple[List[str], List[str]]:
    """
    finds the checks that apply and stores them in lists for the std checks and the innovation
    fail checks.
-    :param estimator_status_flags:
+    :param control_mode:
    :param estimator_status:
    :param b_pos_only_when_sensors_fused:
    :return: a tuple of two lists that contain strings for the std checks and for the innovation
@@ -102,7 +97,7 @@ def find_checks_that_apply(
    innov_fail_checks.append('posv')

    # Magnetometer Sensor Checks
-    if (np.amax(estimator_status_flags['cs_yaw_align']) > 0.5):
+    if (np.amax(control_mode['yaw_aligned']) > 0.5):
        sensor_checks.append('mag')

        innov_fail_checks.append('magx')
@@ -111,14 +106,13 @@ def find_checks_that_apply(
        innov_fail_checks.append('yaw')

    # Velocity Sensor Checks
-    if (np.amax(estimator_status_flags['cs_gps']) > 0.5):
+    if (np.amax(control_mode['using_gps']) > 0.5):
        sensor_checks.append('vel')
-        innov_fail_checks.append('velh')
-        innov_fail_checks.append('velv')
+        innov_fail_checks.append('vel')

    # Position Sensor Checks
-    if (pos_checks_when_sensors_not_fused or (np.amax(estimator_status_flags['cs_gps']) > 0.5)
-        or (np.amax(estimator_status_flags['cs_ev_pos']) > 0.5)):
+    if (pos_checks_when_sensors_not_fused or (np.amax(control_mode['using_gps']) > 0.5)
+        or (np.amax(control_mode['using_evpos']) > 0.5)):
        sensor_checks.append('pos')
        innov_fail_checks.append('posh')

@@ -134,7 +128,7 @@ def find_checks_that_apply(
        innov_fail_checks.append('hagl')

    # optical flow sensor checks
-    if (np.amax(estimator_status_flags['cs_opt_flow']) > 0.5):
+    if (np.amax(control_mode['using_optflow']) > 0.5):
        innov_fail_checks.append('ofx')
        innov_fail_checks.append('ofy')

@@ -123,8 +123,7 @@ def perform_sensor_innov_checks(
                                              ('magy', 'magy_fail_percentage', 'mag'),
                                              ('magz', 'magz_fail_percentage', 'mag'),
                                              ('yaw', 'yaw_fail_percentage', 'yaw'),
-                                              ('velh', 'vel_fail_percentage', 'vel'),
-                                              ('velv', 'vel_fail_percentage', 'vel'),
+                                              ('vel', 'vel_fail_percentage', 'vel'),
                                              ('posh', 'pos_fail_percentage', 'pos'),
                                              ('tas', 'tas_fail_percentage', 'tas'),
                                              ('hagl', 'hagl_fail_percentage', 'hagl'),
@@ -11,7 +11,7 @@ import numpy as np
 from analysis.detectors import InAirDetector

 def calculate_ecl_ekf_metrics(
-        ulog: ULog, estimator_status_flags: Dict[str, float], innov_fail_checks: List[str],
+        ulog: ULog, innov_flags: Dict[str, float], innov_fail_checks: List[str],
        sensor_checks: List[str], in_air: InAirDetector, in_air_no_ground_effects: InAirDetector,
        multi_instance: int = 0, red_thresh: float = 1.0, amb_thresh: float = 0.5) -> Tuple[dict, dict, dict, dict]:

@@ -20,7 +20,7 @@ def calculate_ecl_ekf_metrics(
        red_thresh=red_thresh, amb_thresh=amb_thresh)

    innov_fail_metrics = calculate_innov_fail_metrics(
-        estimator_status_flags, innov_fail_checks, in_air, in_air_no_ground_effects)
+        innov_flags, innov_fail_checks, in_air, in_air_no_ground_effects)

    imu_metrics = calculate_imu_metrics(ulog, multi_instance, in_air_no_ground_effects)

@@ -90,10 +90,10 @@ def calculate_sensor_metrics(


 def calculate_innov_fail_metrics(
-        estimator_status_flags: dict, innov_fail_checks: List[str], in_air: InAirDetector,
+        innov_flags: dict, innov_fail_checks: List[str], in_air: InAirDetector,
        in_air_no_ground_effects: InAirDetector) -> dict:
    """
-    :param estimator_status_flags:
+    :param innov_flags:
    :param innov_fail_checks:
    :param in_air:
    :param in_air_no_ground_effects:
@@ -103,18 +103,17 @@ def calculate_innov_fail_metrics(
    innov_fail_metrics = dict()

    # calculate innovation check fail metrics
-    for signal_id, signal, result in [('posv', 'reject_ver_pos', 'hgt_fail_percentage'),
-                                      ('magx', 'reject_mag_x', 'magx_fail_percentage'),
-                                      ('magy', 'reject_mag_y', 'magy_fail_percentage'),
-                                      ('magz', 'reject_mag_z', 'magz_fail_percentage'),
-                                      ('yaw', 'reject_yaw', 'yaw_fail_percentage'),
-                                      ('velh', 'reject_hor_vel', 'vel_fail_percentage'),
-                                      ('velv', 'reject_ver_vel', 'vel_fail_percentage'),
-                                      ('posh', 'reject_hor_pos', 'pos_fail_percentage'),
-                                      ('tas', 'reject_airspeed', 'tas_fail_percentage'),
-                                      ('hagl', 'reject_hagl', 'hagl_fail_percentage'),
-                                      ('ofx', 'reject_optflow_x', 'ofx_fail_percentage'),
-                                      ('ofy', 'reject_optflow_y', 'ofy_fail_percentage')]:
+    for signal_id, signal, result in [('posv', 'posv_innov_fail', 'hgt_fail_percentage'),
+                                      ('magx', 'magx_innov_fail', 'magx_fail_percentage'),
+                                      ('magy', 'magy_innov_fail', 'magy_fail_percentage'),
+                                      ('magz', 'magz_innov_fail', 'magz_fail_percentage'),
+                                      ('yaw', 'yaw_innov_fail', 'yaw_fail_percentage'),
+                                      ('vel', 'vel_innov_fail', 'vel_fail_percentage'),
+                                      ('posh', 'posh_innov_fail', 'pos_fail_percentage'),
+                                      ('tas', 'tas_innov_fail', 'tas_fail_percentage'),
+                                      ('hagl', 'hagl_innov_fail', 'hagl_fail_percentage'),
+                                      ('ofx', 'ofx_innov_fail', 'ofx_fail_percentage'),
+                                      ('ofy', 'ofy_innov_fail', 'ofy_fail_percentage')]:

        # only run innov fail checks, if they apply.
        if signal_id in innov_fail_checks:
@@ -126,7 +125,7 @@ def calculate_innov_fail_metrics(
                in_air_detector = in_air

            innov_fail_metrics[result] = calculate_stat_from_signal(
-                estimator_status_flags, 'estimator_status_flags', signal, in_air_detector,
+                innov_flags, 'estimator_status', signal, in_air_detector,
                lambda x: 100.0 * np.mean(x > 0.5))

    return innov_fail_metrics
@@ -153,7 +152,7 @@ def calculate_imu_metrics(ulog: ULog, multi_instance, in_air_no_ground_effects:

            if vehicle_imu_status_data['accel_device_id'][0] == estimator_status_data['accel_device_id'][0]:

-                for signal, result in [('gyro_coning_vibration', 'imu_coning'),
+                for signal, result in [('delta_angle_coning_metric', 'imu_coning'),
                                       ('gyro_vibration_metric', 'imu_hfgyro'),
                                       ('accel_vibration_metric', 'imu_hfaccel')]:

@@ -7,6 +7,115 @@ from typing import Tuple

 import numpy as np

+
+def get_estimator_check_flags(estimator_status: dict) -> Tuple[dict, dict, dict]:
+    """
+    :param estimator_status:
+    :return:
+    """
+    control_mode = get_control_mode_flags(estimator_status)
+    innov_flags = get_innovation_check_flags(estimator_status)
+    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
+    return control_mode, innov_flags, gps_fail_flags
+
+
+def get_control_mode_flags(estimator_status: dict) -> dict:
+    """
+    :param estimator_status:
+    :return:
+    """
+
+    control_mode = dict()
+    # extract control mode metadata from estimator_status.control_mode_flags
+    # 0 - true if the filter tilt alignment is complete
+    # 1 - true if the filter yaw alignment is complete
+    # 2 - true if GPS measurements are being fused
+    # 3 - true if optical flow measurements are being fused
+    # 4 - true if a simple magnetic yaw heading is being fused
+    # 5 - true if 3-axis magnetometer measurement are being fused
+    # 6 - true if synthetic magnetic declination measurements are being fused
+    # 7 - true when the vehicle is airborne
+    # 8 - true when wind velocity is being estimated
+    # 9 - true when baro height is being fused as a primary height reference
+    # 10 - true when range finder height is being fused as a primary height reference
+    # 11 - true when range finder height is being fused as a primary height reference
+    # 12 - true when local position data from external vision is being fused
+    # 13 - true when yaw data from external vision measurements is being fused
+    # 14 - true when height data from external vision measurements is being fused
+    # 15 - true when synthetic sideslip measurements are being fused
+    # 16 - true true when the mag field does not match the expected strength
+    # 17 - true true when the vehicle is operating as a fixed wing vehicle
+    # 18 - true when the magnetometer has been declared faulty and is no longer being used
+    # 19 - true true when airspeed measurements are being fused
+    # 20 - true true when protection from ground effect induced static pressure rise is active
+    # 21 - true when rng data wasn't ready for more than 10s and new rng values haven't changed enough
+    # 22 - true when yaw (not ground course) data from a GPS receiver is being fused
+    # 23 - true when the in-flight mag field alignment has been completed
+    # 24 - true when local earth frame velocity data from external vision measurements are being fused
+    # 25 - true when we are using a synthesized measurement for the magnetometer Z component
+    control_mode['tilt_aligned'] = ((2 ** 0 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['yaw_aligned'] = ((2 ** 1 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_gps'] = ((2 ** 2 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_optflow'] = ((2 ** 3 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_magyaw'] = ((2 ** 4 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_mag3d'] = ((2 ** 5 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_magdecl'] = ((2 ** 6 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['airborne'] = ((2 ** 7 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['estimating_wind'] = ((2 ** 8 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_barohgt'] = ((2 ** 9 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_rnghgt'] = ((2 ** 10 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_gpshgt'] = ((2 ** 11 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_evpos'] = ((2 ** 12 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_evyaw'] = ((2 ** 13 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['using_evhgt'] = ((2 ** 14 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['fuse_beta'] = ((2 ** 15 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['mag_field_disturbed'] = ((2 ** 16 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['fixed_wing'] = ((2 ** 17 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['mag_fault'] = ((2 ** 18 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['fuse_aspd'] = ((2 ** 19 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['gnd_effect'] = ((2 ** 20 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['rng_stuck'] = ((2 ** 21 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['gps_yaw'] = ((2 ** 22 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['mag_aligned_in_flight'] = ((2 ** 23 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['ev_vel'] = ((2 ** 24 & estimator_status['control_mode_flags']) > 0) * 1
+    control_mode['synthetic_mag_z'] = ((2 ** 25 & estimator_status['control_mode_flags']) > 0) * 1
+    return control_mode
+
+def get_innovation_check_flags(estimator_status: dict) -> dict:
+    """
+    :param estimator_status:
+    :return:
+    """
+
+    innov_flags = dict()
+    # innovation_check_flags summary
+    # 0 - true if velocity observations have been rejected
+    # 1 - true if horizontal position observations have been rejected
+    # 2 - true if true if vertical position observations have been rejected
+    # 3 - true if the X magnetometer observation has been rejected
+    # 4 - true if the Y magnetometer observation has been rejected
+    # 5 - true if the Z magnetometer observation has been rejected
+    # 6 - true if the yaw observation has been rejected
+    # 7 - true if the airspeed observation has been rejected
+    # 8 - true if synthetic sideslip observation has been rejected
+    # 9 - true if the height above ground observation has been rejected
+    # 10 - true if the X optical flow observation has been rejected
+    # 11 - true if the Y optical flow observation has been rejected
+    innov_flags['vel_innov_fail'] = ((2 ** 0 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['posh_innov_fail'] = ((2 ** 1 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['posv_innov_fail'] = ((2 ** 2 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['magx_innov_fail'] = ((2 ** 3 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['magy_innov_fail'] = ((2 ** 4 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['magz_innov_fail'] = ((2 ** 5 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['yaw_innov_fail'] = ((2 ** 6 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['tas_innov_fail'] = ((2 ** 7 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['sli_innov_fail'] = ((2 ** 8 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['hagl_innov_fail'] = ((2 ** 9 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['ofx_innov_fail'] = ((2 ** 10 & estimator_status['innovation_check_flags']) > 0) * 1
+    innov_flags['ofy_innov_fail'] = ((2 ** 11 & estimator_status['innovation_check_flags']) > 0) * 1
+    return innov_flags
+
+
 def get_gps_check_fail_flags(estimator_status: dict) -> dict:
    """
    :param estimator_status:
@@ -11,7 +11,7 @@ import numpy as np
 from matplotlib.backends.backend_pdf import PdfPages
 from pyulog import ULog

-from analysis.post_processing import magnetic_field_estimates_from_states, get_gps_check_fail_flags
+from analysis.post_processing import magnetic_field_estimates_from_states, get_estimator_check_flags
 from plotting.data_plots import TimeSeriesPlot, InnovationPlot, ControlModeSummaryPlot, \
    CheckFlagsPlot
 from analysis.detectors import PreconditionError
@@ -33,11 +33,6 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
    except:
        raise PreconditionError('could not find estimator_status instance', multi_instance)

-    try:
-        estimator_status_flags = ulog.get_dataset('estimator_status_flags', multi_instance).data
-    except:
-        raise PreconditionError('could not find estimator_status_flags instance', multi_instance)
-
    try:
        estimator_states = ulog.get_dataset('estimator_states', multi_instance).data
    except:
@@ -73,13 +68,12 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
    except:
        raise PreconditionError('could not find innovation data')

-    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
+    control_mode, innov_flags, gps_fail_flags = get_estimator_check_flags(estimator_status)

    status_time = 1e-6 * estimator_status['timestamp']
-    status_flags_time = 1e-6 * estimator_status_flags['timestamp']

    b_finishes_in_air, b_starts_in_air, in_air_duration, in_air_transition_time, \
-    on_ground_transition_time = detect_airtime(estimator_status_flags, status_flags_time)
+    on_ground_transition_time = detect_airtime(control_mode, status_time)

    with PdfPages(output_plot_filename) as pdf_pages:

@@ -179,9 +173,9 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str

        # plot control mode summary A
        data_plot = ControlModeSummaryPlot(
-            status_flags_time, estimator_status_flags, [['cs_tilt_align', 'cs_yaw_align'],
-            ['cs_gps', 'cs_opt_flow', 'cs_ev_pos'], ['cs_baro_hgt', 'cs_gps_hgt',
-             'cs_rng_hgt', 'cs_ev_hgt'], ['cs_mag_hdg', 'cs_mag_3d', 'cs_mag_dec']],
+            status_time, control_mode, [['tilt_aligned', 'yaw_aligned'],
+            ['using_gps', 'using_optflow', 'using_evpos'], ['using_barohgt', 'using_gpshgt',
+             'using_rnghgt', 'using_evhgt'], ['using_magyaw', 'using_mag3d', 'using_magdecl']],
            x_label='time (sec)', y_labels=['aligned', 'pos aiding', 'hgt aiding', 'mag aiding'],
            annotation_text=[['tilt alignment', 'yaw alignment'], ['GPS aiding', 'optical flow aiding',
             'external vision aiding'], ['Baro aiding', 'GPS aiding', 'rangefinder aiding',
@@ -194,7 +188,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
        # plot control mode summary B
        # construct additional annotations for the airborne plot
        airborne_annotations = list()
-        if np.amin(np.diff(estimator_status_flags['cs_in_air'])) > -0.5:
+        if np.amin(np.diff(control_mode['airborne'])) > -0.5:
            airborne_annotations.append(
                (on_ground_transition_time, 'air to ground transition not detected'))
        else:
@@ -203,7 +197,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
        if in_air_duration > 0.0:
            airborne_annotations.append(((in_air_transition_time + on_ground_transition_time) / 2,
                                         'duration = {:.1f} sec'.format(in_air_duration)))
-        if np.amax(np.diff(estimator_status_flags['cs_in_air'])) < 0.5:
+        if np.amax(np.diff(control_mode['airborne'])) < 0.5:
            airborne_annotations.append(
                (in_air_transition_time, 'ground to air transition not detected'))
        else:
@@ -211,7 +205,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
                (in_air_transition_time, 'in-air at {:.1f} sec'.format(in_air_transition_time)))

        data_plot = ControlModeSummaryPlot(
-            status_flags_time, estimator_status_flags, [['cs_in_air'], ['cs_wind']],
+            status_time, control_mode, [['airborne'], ['estimating_wind']],
            x_label='time (sec)', y_labels=['airborne', 'estimating wind'], annotation_text=[[], []],
            additional_annotation=[airborne_annotations, []],
            plot_title='EKF Control Status - Figure B', pdf_handle=pdf_pages)
@@ -220,15 +214,15 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str

        # plot innovation_check_flags summary
        data_plot = CheckFlagsPlot(
-            status_flags_time, estimator_status_flags, [['reject_hor_vel', 'reject_hor_pos'], ['reject_ver_vel', 'reject_ver_pos',
-                                                                               'reject_hagl'],
-                                       ['reject_mag_x', 'reject_mag_y', 'reject_mag_z',
-                                        'reject_yaw'], ['reject_airspeed'], ['reject_sideslip'],
-                                       ['reject_optflow_x',
-                                        'reject_optflow_y']], x_label='time (sec)',
+            status_time, innov_flags, [['vel_innov_fail', 'posh_innov_fail'], ['posv_innov_fail',
+                                                                               'hagl_innov_fail'],
+                                       ['magx_innov_fail', 'magy_innov_fail', 'magz_innov_fail',
+                                        'yaw_innov_fail'], ['tas_innov_fail'], ['sli_innov_fail'],
+                                       ['ofx_innov_fail',
+                                        'ofy_innov_fail']], x_label='time (sec)',
            y_labels=['failed', 'failed', 'failed', 'failed', 'failed', 'failed'],
            y_lim=(-0.1, 1.1),
-            legend=[['vel NE', 'pos NE'], ['vel D', 'hgt absolute', 'hgt above ground'],
+            legend=[['vel NED', 'pos NE'], ['hgt absolute', 'hgt above ground'],
                    ['mag_x', 'mag_y', 'mag_z', 'yaw'], ['airspeed'], ['sideslip'],
                    ['flow X', 'flow Y']],
            plot_title='EKF Innovation Test Fails', annotate=False, pdf_handle=pdf_pages)
@@ -350,33 +344,33 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
        data_plot.close()


-def detect_airtime(estimator_status_flags, status_flags_time):
+def detect_airtime(control_mode, status_time):
    # define flags for starting and finishing in air
    b_starts_in_air = False
    b_finishes_in_air = False
    # calculate in-air transition time
-    if (np.amin(estimator_status_flags['cs_in_air']) < 0.5) and (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
-        in_air_transtion_time_arg = np.argmax(np.diff(estimator_status_flags['cs_in_air']))
-        in_air_transition_time = status_flags_time[in_air_transtion_time_arg]
-    elif (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
-        in_air_transition_time = np.amin(status_flags_time)
+    if (np.amin(control_mode['airborne']) < 0.5) and (np.amax(control_mode['airborne']) > 0.5):
+        in_air_transtion_time_arg = np.argmax(np.diff(control_mode['airborne']))
+        in_air_transition_time = status_time[in_air_transtion_time_arg]
+    elif (np.amax(control_mode['airborne']) > 0.5):
+        in_air_transition_time = np.amin(status_time)
        print('log starts while in-air at ' + str(round(in_air_transition_time, 1)) + ' sec')
        b_starts_in_air = True
    else:
        in_air_transition_time = float('NaN')
        print('always on ground')
    # calculate on-ground transition time
-    if (np.amin(np.diff(estimator_status_flags['cs_in_air'])) < 0.0):
-        on_ground_transition_time_arg = np.argmin(np.diff(estimator_status_flags['cs_in_air']))
-        on_ground_transition_time = status_flags_time[on_ground_transition_time_arg]
-    elif (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
-        on_ground_transition_time = np.amax(status_flags_time)
+    if (np.amin(np.diff(control_mode['airborne'])) < 0.0):
+        on_ground_transition_time_arg = np.argmin(np.diff(control_mode['airborne']))
+        on_ground_transition_time = status_time[on_ground_transition_time_arg]
+    elif (np.amax(control_mode['airborne']) > 0.5):
+        on_ground_transition_time = np.amax(status_time)
        print('log finishes while in-air at ' + str(round(on_ground_transition_time, 1)) + ' sec')
        b_finishes_in_air = True
    else:
        on_ground_transition_time = float('NaN')
        print('always on ground')
-    if (np.amax(np.diff(estimator_status_flags['cs_in_air'])) > 0.5) and (np.amin(np.diff(estimator_status_flags['cs_in_air'])) < -0.5):
+    if (np.amax(np.diff(control_mode['airborne'])) > 0.5) and (np.amin(np.diff(control_mode['airborne'])) < -0.5):
        if ((on_ground_transition_time - in_air_transition_time) > 0.0):
            in_air_duration = on_ground_transition_time - in_air_transition_time
        else:
@@ -1,7 +0,0 @@
-if SWD
-speed 1000
-r
-loadbin /Users/landon/git/px4/build/nxp_ucans32k146_nxp_demo/deploy/34.bin,0x6000
-r
-g
-q
@@ -1,3 +0,0 @@
-#!/bin/zsh
-
-JLinkExe -device S32K146 -CommandFile /Users/landon/git/px4/Tools/flash_nxp/flash_ucan.jlink
@@ -200,12 +200,13 @@ if [[ $INSTALL_SIM == "true" ]]; then

 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		java_version=11
+		gazebo_version=9
 	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		java_version=13
-	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		java_version=11
+		gazebo_version=11
 	else
 		java_version=14
+		gazebo_version=11
 	fi
 	# Java (jmavsim or fastrtps)
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -219,30 +220,20 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")

 	# Gazebo
-	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-		gazebo_version=9
-		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
-	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		gazebo_packages="gazebo libgazebo-dev"
-	else
-		# default and Ubuntu 20.04
-		gazebo_version=11
-		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
-	fi
-
 	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 	# Update list, since new gazebo-stable.list has been added
 	sudo apt-get update -y --quiet
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		dmidecode \
-		$gazebo_packages \
+		gazebo$gazebo_version \
 		gstreamer1.0-plugins-bad \
 		gstreamer1.0-plugins-base \
 		gstreamer1.0-plugins-good \
 		gstreamer1.0-plugins-ugly \
 		gstreamer1.0-libav \
 		libeigen3-dev \
+		libgazebo$gazebo_version-dev \
 		libgstreamer-plugins-base1.0-dev \
 		libimage-exiftool-perl \
 		libopencv-dev \
@@ -9,11 +9,3 @@ param set-default BAT1_A_PER_V 15.391030303
 rgbled_pwm start
 safety_button start

-# pre-arm stuff
-param set-default SYS_CTRL_ALLOC 1
-param set-default COM_PREARM_MODE 2
-
-# Cyphal stuff
-ifup can0
-cyphal start
-elm_lighting_module
@@ -1,12 +0,0 @@
-CONFIG_DRIVERS_UAVCAN=n
-CONFIG_DRIVERS_CYPHAL=y
-CONFIG_CYPHAL_BMS_SUBSCRIBER=y
-CONFIG_CYPHAL_ESC_SUBSCRIBER=y
-CONFIG_CYPHAL_GNSS_SUBSCRIBER_0=y
-CONFIG_CYPHAL_GNSS_SUBSCRIBER_1=y
-CONFIG_CYPHAL_READINESS_PUBLISHER=y
-CONFIG_CYPHAL_UORB_ACTUATOR_OUTPUTS_PUBLISHER=y
-CONFIG_EXAMPLES_ELM_LIGHTING_MODULE=y
-CONFIG_EXAMPLES_LIGHTING_STATES_PUBLISHER=y
-#CONFIG_MODULES_MICRODDS_CLIENT=y
-#CONFIG_MODULES_MICRORTPS_BRIDGE=y
@@ -25,4 +25,3 @@ CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
@@ -3,15 +3,7 @@
 # board specific defaults
 #------------------------------------------------------------------------------

-# pre-arm stuff
-#param set-default SYS_CTRL_ALLOC 1
-
-#pwm_out start
-
-#control_allocator start
+pwm_out mode_pwm1 start

 ifup can0
 cyphal start
-lighting_state_converter start
-actuator_controls_driver start
-pca9685 start -X
@@ -1,9 +0,0 @@
-CONFIG_DRIVERS_GPS=n
-CONFIG_DRIVERS_LIGHTS_APA102=y
-CONFIG_DRIVERS_PCA9685=y
-CONFIG_DRIVERS_PCA9685_PWM_OUT=y
-CONFIG_EXAMPLES_ACTUATOR_CONTROLS_DRIVER=y
-CONFIG_MODULES_LIGHTING_STATE_CONVERTER=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
-CONFIG_SYSTEMCMDS_MOTOR_TEST=y
-CONFIG_SYSTEMCMDS_UORB=y
@@ -106,7 +106,7 @@ __BEGIN_DECLS
 *      Defined in board.h
 */

-#define DIRECT_PWM_OUTPUT_CHANNELS  2
+#define DIRECT_PWM_OUTPUT_CHANNELS  1


 #define BOARD_HAS_LED_PWM              1
@@ -110,7 +110,6 @@ constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {

 constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
 	initIOTimerChannel(io_timers, {Timer::FTM2, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::FTM2, Timer::Channel2}, {GPIO::PortA, GPIO::Pin1}),
 };

 constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
@@ -9,4 +9,5 @@ CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_I2C=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_SERIAL=y
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_FW_POS_CONTROL_L1=y
@@ -397,15 +397,27 @@
 #define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8]  */
 #define GPIO_I2C1_SDA GPIO_I2C1_SDA_2       /* PB9  */

+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
+
 #define GPIO_I2C2_SCL GPIO_I2C2_SCL_2       /* PF1 */
 #define GPIO_I2C2_SDA GPIO_I2C2_SDA_2       /* PF0 */

+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN1)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN0)
+
 #define GPIO_I2C3_SCL GPIO_I2C3_SCL_2       /* PH7 */
 #define GPIO_I2C3_SDA GPIO_I2C3_SDA_2       /* PH8 */

+#define GPIO_I2C3_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN7)
+#define GPIO_I2C3_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN8)
+
 #define GPIO_I2C4_SCL GPIO_I2C4_SCL_2       /* PF14 */
 #define GPIO_I2C4_SDA GPIO_I2C4_SDA_2       /* PF15 */

+#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN14)
+#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN15)
+
 /* SDMMC1
 *
 *      VDD 3.3
@@ -459,15 +459,7 @@ static inline bool board_get_external_lockout_state(void)
 		GPIO_RSSI_IN_INIT,                \
 		GPIO_nSAFETY_SWITCH_LED_OUT_INIT, \
 		GPIO_SAFETY_SWITCH_IN,            \
-		GPIO_nARMED_INIT,                  \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C1_SCL), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C1_SDA), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C2_SCL), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C2_SDA), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C3_SCL), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C3_SDA), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C4_SCL), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C4_SDA), \
+		GPIO_nARMED_INIT                  \
 	}

 #define BOARD_ENABLE_CONSOLE_BUFFER
@@ -394,15 +394,27 @@
 #define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
 #define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */

+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
 #define GPIO_I2C2_SCL GPIO_I2C2_SCL_2       /* PF1 */
 #define GPIO_I2C2_SDA GPIO_I2C2_SDA_2       /* PF0 */

+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN1)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN0)
+
 #define GPIO_I2C3_SCL GPIO_I2C3_SCL_2       /* PH7 */
 #define GPIO_I2C3_SDA GPIO_I2C3_SDA_2       /* PH8 */

+#define GPIO_I2C3_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN7)
+#define GPIO_I2C3_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN8)
+
 #define GPIO_I2C4_SCL GPIO_I2C4_SCL_2       /* PF14 */
 #define GPIO_I2C4_SDA GPIO_I2C4_SDA_2       /* PF15 */

+#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN14)
+#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN15)
+
 /* SDMMC2
 *
 *      VDD 3.3
@@ -423,15 +423,7 @@
 		GPIO_nSAFETY_SWITCH_LED_OUT_INIT, \
 		GPIO_SAFETY_SWITCH_IN,            \
 		GPIO_PG6,                         \
-		GPIO_nARMED_INIT,                  \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C1_SCL), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C1_SDA), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C2_SCL), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C2_SDA), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C3_SCL), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C3_SDA), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C4_SCL), \
-		PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C4_SDA), \
+		GPIO_nARMED_INIT                  \
 	}

 #define BOARD_ENABLE_CONSOLE_BUFFER
@@ -1,3 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_ROMFSROOT=""
@@ -1,91 +0,0 @@
-CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
-CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
-CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS6"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS5"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
-CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
-CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_COMMON_BAROMETERS=y
-CONFIG_DRIVERS_BATT_SMBUS=y
-CONFIG_DRIVERS_CAMERA_CAPTURE=y
-CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_HEATER=y
-CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
-CONFIG_COMMON_LIGHT=y
-CONFIG_COMMON_MAGNETOMETER=y
-CONFIG_COMMON_OPTICAL_FLOW=y
-CONFIG_DRIVERS_POWER_MONITOR_INA226=y
-CONFIG_DRIVERS_POWER_MONITOR_INA228=y
-CONFIG_DRIVERS_POWER_MONITOR_INA238=y
-CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_PWM_OUT_SIM=y
-CONFIG_DRIVERS_PX4IO=y
-CONFIG_COMMON_TELEMETRY=y
-CONFIG_DRIVERS_TONE_ALARM=y
-CONFIG_DRIVERS_UAVCAN=y
-CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
-CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_BATTERY_STATUS=y
-CONFIG_MODULES_CAMERA_FEEDBACK=y
-CONFIG_MODULES_COMMANDER=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
-CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_ESC_BATTERY=y
-CONFIG_MODULES_EVENTS=y
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_POS_CONTROL_L1=y
-CONFIG_MODULES_GIMBAL=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_GYRO_FFT=y
-CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOGGER=y
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_MANUAL_CONTROL=y
-CONFIG_MODULES_MAVLINK=y
-CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-CONFIG_MODULES_MC_POS_CONTROL=y
-CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_NAVIGATOR=y
-CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_ROVER_POS_CONTROL=y
-CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_SIH=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
-CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
-CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_TEST=y
-CONFIG_SYSTEMCMDS_MTD=y
-CONFIG_SYSTEMCMDS_NSHTERM=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_PWM=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SERIAL_TEST=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -1,13 +0,0 @@
-{
-    "board_id": 56,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the PX4FMUv6C board",
-    "image": "",
-    "build_time": 0,
-    "summary": "PX4FMUv6C",
-    "version": "0.1",
-    "image_size": 0,
-    "image_maxsize": 1966080,
-    "git_identity": "",
-    "board_revision": 0
-}
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-
-param set-default BAT1_V_DIV 18.1
-param set-default BAT2_V_DIV 18.1
-
-param set-default BAT1_A_PER_V 36.367515152
-param set-default BAT2_A_PER_V 36.367515152
-
-# Mavlink ethernet (CFG 1000)
-param set-default MAV_2_CONFIG 1000
-param set-default MAV_2_BROADCAST 1
-param set-default MAV_2_MODE 0
-param set-default MAV_2_RADIO_CTL 0
-param set-default MAV_2_RATE 100000
-param set-default MAV_2_REMOTE_PRT 14550
-param set-default MAV_2_UDP_PRT 14550
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# PX4 FMUv6C specific board sensors init
-#------------------------------------------------------------------------------
-board_adc start
-
-# Internal SPI bus BMI055 accel/gyro
-bmi055 -A -R 4 -s start
-bmi055 -G -R 4 -s start
-
-# Internal SPI bus ICM42688p
-icm42688p -R 6 -s start
-
-# Internal barometer on I2C4
-ms5611 -I -b 4 -a 0x77 start
-
-# Internal compass on IMU I2C4
-ist8310 -I -b 4 -a 0xc -R 6 start
-
-# External compass on GPS/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
-ist8310 -X -b 1 -R 10 start
@@ -1,17 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
-#
-config BOARD_HAS_PROBES
-	bool "Board provides GPIO or other Hardware for signaling to timing analyze."
-	default y
-	---help---
-		This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
-
-config BOARD_USE_PROBES
-	bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
-	default n
-	depends on BOARD_HAS_PROBES
-
-	---help---
-		Select to use GPIO FMU-CH1-5, CAP1-6  to provide timing signals from selected drivers.
@@ -1,96 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DEV_CONSOLE is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_SPI_EXCHANGE is not set
-# CONFIG_STM32H7_SYSCFG is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/px4/fmu-v6c/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H753II=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_INITTHREAD_PRIORITY=254
-CONFIG_BOARD_LATE_INITIALIZE=y
-CONFIG_BOARD_LOOPSPERMSEC=95150
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_C99_BOOL8=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x0038
-CONFIG_CDCACM_PRODUCTSTR="PX4 BL FMU v6C.x"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x3185
-CONFIG_CDCACM_VENDORSTR="Auterion"
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_PTHREAD=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SPI=y
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_UART7=y
-CONFIG_SYSTEMTICK_HOOK=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGINT_CHAR=0x03
-CONFIG_TTY_SIGTSTP=y
-CONFIG_UART7_RXBUFSIZE=512
-CONFIG_UART7_RXDMA=y
-CONFIG_UART7_TXBUFSIZE=512
-CONFIG_UART7_TXDMA=y
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
@@ -1,505 +0,0 @@
-/************************************************************************************
- * nuttx-configs/px4_fmu-v6c/include/board.h
- *
- *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
- *   Authors: David Sidrane <david.sidrane@nscdg.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-#ifndef __NUTTX_CONFIG_PX4_FMU_V6C_INCLUDE_BOARD_H
-#define __NUTTX_CONFIG_PX4_FMU_V6C_INCLUDE_BOARD_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include "board_dma_map.h"
-
-#include <nuttx/config.h>
-
-#ifndef __ASSEMBLY__
-# include <stdint.h>
-#endif
-
-#include "stm32_rcc.h"
-#include "stm32_sdmmc.h"
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-
-/* Clocking *************************************************************************/
-/* The px4_fmu-v6C  board provides the following clock sources:
- *
- *   X1: 16 MHz crystal for HSE
- *
- * So we have these clock source available within the STM32
- *
- *   HSI: 16 MHz RC factory-trimmed
- *   HSE: 16 MHz crystal for HSE
- */
-
-#define STM32_BOARD_XTAL        16000000ul
-
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
-#define STM32_LSE_FREQUENCY     32768
-
-/* Main PLL Configuration.
- *
- * PLL source is HSE = 16,000,000
- *
- * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
- * Subject to:
- *
- *     1 <= PLLM <= 63
- *     4 <= PLLN <= 512
- *   150 MHz <= PLL_VCOL <= 420MHz
- *   192 MHz <= PLL_VCOH <= 836MHz
- *
- * SYSCLK  = PLL_VCO / PLLP
- * CPUCLK  = SYSCLK / D1CPRE
- * Subject to
- *
- *   PLLP1   = {2, 4, 6, 8, ..., 128}
- *   PLLP2,3 = {2, 3, 4, ..., 128}
- *   CPUCLK <= 480 MHz
- */
-
-#define STM32_BOARD_USEHSE
-
-#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
-
-/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
- *
- *   PLL1_VCO = (16,000,000 / 1) * 60 = 960 MHz
- *
- *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
- *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
- *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
- */
-
-#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
-				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
-				 RCC_PLLCFGR_DIVP1EN | \
-				 RCC_PLLCFGR_DIVQ1EN | \
-				 RCC_PLLCFGR_DIVR1EN)
-#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
-#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(60)
-#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
-#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
-#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
-
-#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 60)
-#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
-#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
-#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
-
-/* PLL2 */
-
-#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
-				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
-				  RCC_PLLCFGR_DIVP2EN | \
-				  RCC_PLLCFGR_DIVQ2EN | \
-				  RCC_PLLCFGR_DIVR2EN)
-#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(4)
-#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
-#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
-#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
-#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
-
-#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 4) * 48)
-#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
-
-/* PLL3 */
-
-#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
-				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
-				 RCC_PLLCFGR_DIVQ3EN)
-#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(4)
-#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
-#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
-#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
-#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
-
-#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 4) * 48)
-#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
-#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
-
-/* SYSCLK = PLL1P = 480MHz
- * CPUCLK = SYSCLK / 1 = 480 MHz
- */
-
-#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
-#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
-#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
-
-/* Configure Clock Assignments */
-
-/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
- * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
- */
-
-#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
-#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
-#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
-
-/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
-#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
-
-#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
-#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
-
-#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
-#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
-
-/* Timer clock frequencies */
-
-/* Timers driven from APB1 will be twice PCLK1 */
-
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-
-/* Timers driven from APB2 will be twice PCLK2 */
-
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-
-/* Kernel Clock Configuration
- *
- * Note: look at Table 54 in ST Manual
- */
-
-/* I2C123 clock source */
-
-#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
-
-/* I2C4 clock source */
-
-#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
-
-/* SPI123 clock source */
-
-#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
-
-/* SPI45 clock source */
-
-#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
-
-/* SPI6 clock source */
-
-#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
-
-/* USB 1 and 2 clock source */
-
-#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
-
-/* ADC 1 2 3 clock source */
-
-#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
-
-/* FDCAN 1 2 clock source */
-
-#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
-
-#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
-
-/* FLASH wait states
- *
- *  ------------ ---------- -----------
- *  Vcore        MAX ACLK   WAIT STATES
- *  ------------ ---------- -----------
- *  1.15-1.26 V     70 MHz    0
- *  (VOS1 level)   140 MHz    1
- *                 210 MHz    2
- *  1.05-1.15 V     55 MHz    0
- *  (VOS2 level)   110 MHz    1
- *                 165 MHz    2
- *                 220 MHz    3
- *  0.95-1.05 V     45 MHz    0
- *  (VOS3 level)    90 MHz    1
- *                 135 MHz    2
- *                 180 MHz    3
- *                 225 MHz    4
- *  ------------ ---------- -----------
- */
-
-#define BOARD_FLASH_WAITSTATES 2
-
-/* SDMMC definitions ********************************************************/
-
-/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
-
-#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-
-/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
- * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
- */
-
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#else
-#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
-#endif
-
-#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
-
-/* LED definitions ******************************************************************/
-/* The PX4 FMUV6C board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
- * LED_RED a Red LED, that can be controlled by software.
- *
- * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
- * The following definitions are used to access individual LEDs.
- */
-
-/* LED index values for use with board_userled() */
-
-/* LED definitions ******************************************************************/
-/* The px4_fmu-v6c board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
- * LED_RED a Red LED, that can be controlled by software.
- *
- * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
- * The following definitions are used to access individual LEDs.
- */
-
-/* LED index values for use with board_userled() */
-
-#define BOARD_LED1        0
-#define BOARD_LED2        1
-#define BOARD_LED3        2
-#define BOARD_NLEDS       3
-
-#define BOARD_LED_RED     BOARD_LED1
-#define BOARD_LED_GREEN   BOARD_LED2
-#define BOARD_LED_BLUE    BOARD_LED3
-
-/* LED bits for use with board_userled_all() */
-
-#define BOARD_LED1_BIT    (1 << BOARD_LED1)
-#define BOARD_LED2_BIT    (1 << BOARD_LED2)
-#define BOARD_LED3_BIT    (1 << BOARD_LED3)
-
-/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
- * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
- * events as follows:
- *
- *
- *   SYMBOL                     Meaning                      LED state
- *                                                        Red   Green Blue
- *   ----------------------  --------------------------  ------ ------ ----*/
-
-#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
-#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
-#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
-#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
-#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
-#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
-#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
-#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
-#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
-
-/* Thus if the Green LED is statically on, NuttX has successfully booted and
- * is, apparently, running normally.  If the Red LED is flashing at
- * approximately 2Hz, then a fatal error has been detected and the system
- * has halted.
- */
-
-/* Alternate function pin selections ************************************************/
-
-#define GPIO_USART1_RX   GPIO_USART1_RX_2    /* PA10 */
-#define GPIO_USART1_TX   GPIO_USART1_TX_3    /* PB6 */
-
-#define GPIO_USART2_RX   GPIO_USART2_RX_1   /* PA3   */
-#define GPIO_USART2_TX   GPIO_USART2_TX_2   /* PD5   */
-
-#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9   */
-#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8   */
-
-#define GPIO_UART5_RX    GPIO_UART5_RX_3    /* PD2  */
-#define GPIO_UART5_TX    GPIO_UART5_TX_3    /* PC12 */
-// GPIO_UART5_RTS   no remap                /* PC8  */
-// GPIO_UART5_CTS  No remap                 /* PC9  */
-
-#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7 */
-#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
-
-#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7  */
-#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
-#define GPIO_UART7_RTS   GPIO_UART7_RTS_1   /* PE9  */
-#define GPIO_UART7_CTS   GPIO_UART7_CTS_1   /* PE10 */
-
-#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0 */
-#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1 */
-
-
-/* CAN
- *
- * CAN1 is routed to transceiver.
- * CAN2 is routed to transceiver.
- */
-#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
-#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1  */
-#define GPIO_CAN2_RX     GPIO_CAN2_RX_2     /* PB5 */
-#define GPIO_CAN2_TX     GPIO_CAN2_TX_1     /* PB13  */
-
-/* SPI
- * SPI1 is sensors
- * SPI2 is FRAM
- *
- */
-
-#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
-
-#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
-#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
-#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5  */
-
-#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_2               /* PC2  */
-#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_3               /* PC3  */
-#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_5) /* PD3  */
-
-/* I2C
- *
- *   The optional _GPIO configurations allow the I2C driver to manually
- *   reset the bus to clear stuck slaves.  They match the pin configuration,
- *   but are normally-high GPIOs.
- *
- */
-
-#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
-#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
-
-#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
-#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
-
-#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1       /* PB10 */
-#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1       /* PB11*/
-
-#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
-#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
-
-#define GPIO_I2C4_SCL GPIO_I2C4_SCL_1       /* PD12 */
-#define GPIO_I2C4_SDA GPIO_I2C4_SDA_1       /* PD13 */
-
-#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN12)
-#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN13)
-
-/* SDMMC2
- *
- *      VDD 3.3
- *      GND
- *      SDMMC2_CK                           PD6
- *      SDMMC2_CMD                          PD7
- *      SDMMC2_D0                           PB14
- *      SDMMC2_D1                           PB15
- *      SDMMC2_D2                           PB3
- *      SDMMC2_D3                           PB4
- */
-
-#define GPIO_SDMMC2_CK   GPIO_SDMMC2_CK_1  /* PD6  */
-#define GPIO_SDMMC2_CMD  GPIO_SDMMC2_CMD_1 /* PD7  */
-//      GPIO_SDMMC2_D0   No Remap          /* PB14 */
-//      GPIO_SDMMC2_D1   No Remap          /* PB15 */
-#define GPIO_SDMMC2_D2   GPIO_SDMMC2_D2_2  /* PB3  */
-//      GPIO_SDMMC2_D3    No Remap         /* PB4  */
-
-/* USB
- *
- *      OTG_FS_DM                           PA11
- *      OTG_FS_DP                           PA12
- *      VBUS                                PA9
- */
-
-
-/* Board provides GPIO or other Hardware for signaling to timing analyzer */
-
-#if defined(CONFIG_BOARD_USE_PROBES)
-# include "stm32_gpio.h"
-# define PROBE_N(n) (1<<((n)-1))
-# define PROBE_1    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8)   /* PA8  AUX1 */
-# define PROBE_2    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)  /* PE11 AUX2 */
-# define PROBE_3    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13)  /* PE13 AUX3 */
-# define PROBE_4    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14)  /* PE14 AUX4 */
-# define PROBE_5    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)  /* PD14 AUX5 */
-# define PROBE_6    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)  /* PD15 AUX6 */
-# define PROBE_7    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)   /* PA0  AUX7 */
-# define PROBE_8    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN2)   /* PA1  AUX8 */
-
-# define PROBE_INIT(mask) \
-	do { \
-		if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
-		if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
-		if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
-		if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
-		if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
-		if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
-		if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
-		if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
-	} while(0)
-
-# define PROBE(n,s)  do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
-# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
-#else
-# define PROBE_INIT(mask)
-# define PROBE(n,s)
-# define PROBE_MARK(n)
-#endif
-
-#endif  /*__NUTTX_CONFIG_PX4_FMU_V6C_INCLUDE_BOARD_H  */
@@ -1,79 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
-//                                                     V
-
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     /* 1 DMA1:37 BMI055, ICM-42688-P */
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     /* 2 DMA1:38 BMI055, ICM-42688-P  */
-
-#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0     /* 3 DMA1:39 FRAM */
-#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0     /* 4 DMA1:40 FRAM */
-
-//#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
-//#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
-
-//#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_0 /*  DMA1:43 Telem3 */
-//#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_0 /*  DMA1:44 Telem3 */
-
-//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
-//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
-
-//#define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 EXT2 */
-//#define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 EXT2 */
-
-#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   /* 5 DMA1:71 PX4IO */
-#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   /* 6 DMA1:72 PX4IO */
-
-// Assigned in timer_config.cpp
-
-// Timer 4                                          /* 7 DMA1:32 TIM4UP */
-// Timer 5                                          /* 8 DMA1:50 TIM5UP */
-
-// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
-//                                                     V
-
-
-#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
-#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
-
-#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
-#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66  TELEM2 */
-
-#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79  TELEM1 */
-#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80  TELEM1 */
-
-//#define DMAMAP_UART8_RX   DMAMAP_DMA12_UART8RX_1  /*  DMA1:81  GPS2 */
-//#define DMAMAP_UART8_TX   DMAMAP_DMA12_UART8TX_1  /*  DMA1:82  GPS2 */
@@ -1,241 +0,0 @@
-#
-# This file is autogenerated: PLEASE DO NOT EDIT IT.
-#
-# You can use "make menuconfig" to make any modifications to the installed .config file.
-# You can then do "make savedefconfig" to generate a new defconfig file that includes your
-# modifications.
-#
-# CONFIG_DISABLE_ENVIRON is not set
-# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
-# CONFIG_MMCSD_HAVE_CARDDETECT is not set
-# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
-# CONFIG_MMCSD_MMCSUPPORT is not set
-# CONFIG_MMCSD_SPI is not set
-# CONFIG_NSH_DISABLEBG is not set
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_DF is not set
-# CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
-# CONFIG_NSH_DISABLE_GET is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
-# CONFIG_NSH_DISABLE_SEMICOLON is not set
-# CONFIG_NSH_DISABLE_TIME is not set
-CONFIG_ARCH="arm"
-CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/px4/fmu-v6c/nuttx-config"
-CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743VI=y
-CONFIG_ARCH_CHIP_STM32H7=y
-CONFIG_ARCH_INTERRUPTSTACK=512
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARMV7M_BASEPRI_WAR=y
-CONFIG_ARMV7M_DCACHE=y
-CONFIG_ARMV7M_DTCM=y
-CONFIG_ARMV7M_ICACHE=y
-CONFIG_ARMV7M_MEMCPY=y
-CONFIG_ARMV7M_USEBASEPRI=y
-CONFIG_ARM_MPU_EARLY_RESET=y
-CONFIG_BOARDCTL_RESET=y
-CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_LOOPSPERMSEC=95751
-CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
-CONFIG_CDCACM=y
-CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x0038
-CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v6C.x"
-CONFIG_CDCACM_RXBUFSIZE=600
-CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x3185
-CONFIG_CDCACM_VENDORSTR="Auterion"
-CONFIG_CLOCK_MONOTONIC=y
-CONFIG_DEBUG_FULLOPT=y
-CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_MEMFAULT=y
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
-CONFIG_EXPERIMENTAL=y
-CONFIG_FAT_DMAMEMORY=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_LFN_ALIAS_HASH=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
-CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_MAX_TASKS=64
-CONFIG_FS_PROCFS_REGISTER=y
-CONFIG_FS_ROMFS=y
-CONFIG_GRAN=y
-CONFIG_GRAN_INTR=y
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_I2C=y
-CONFIG_I2C_RESET=y
-CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_IOB_NBUFFERS=24
-CONFIG_IOB_NCHAINS=24
-CONFIG_LIBC_FLOATINGPOINT=y
-CONFIG_LIBC_LONG_LONG=y
-CONFIG_LIBC_STRERROR=y
-CONFIG_MEMSET_64BIT=y
-CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
-CONFIG_MM_IOB=y
-CONFIG_MM_REGIONS=4
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_PROGMEM=y
-CONFIG_MTD_RAMTRON=y
-CONFIG_NAME_MAX=40
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_ARGCAT=y
-CONFIG_NSH_BUILTIN_APPS=y
-CONFIG_NSH_CMDPARMS=y
-CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_LINELEN=128
-CONFIG_NSH_MAXARGUMENTS=15
-CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_QUOTE=y
-CONFIG_NSH_ROMFSETC=y
-CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
-CONFIG_NSH_VARS=y
-CONFIG_OTG_ID_GPIO_DISABLE=y
-CONFIG_PIPES=y
-CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_ROBUST=y
-CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_SETSPEED=y
-CONFIG_RAM_SIZE=245760
-CONFIG_RAM_START=0x20010000
-CONFIG_RAW_BINARY=y
-CONFIG_READLINE_CMD_HISTORY=y
-CONFIG_READLINE_TABCOMPLETION=y
-CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_HPWORKPRIORITY=249
-CONFIG_SCHED_HPWORKSTACKSIZE=1280
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
-CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_SIG_DEFAULT=y
-CONFIG_SIG_SIGALRM_ACTION=y
-CONFIG_SIG_SIGUSR1_ACTION=y
-CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
-CONFIG_STACK_COLORATION=y
-CONFIG_START_DAY=30
-CONFIG_START_MONTH=11
-CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_STM32H7_ADC1=y
-CONFIG_STM32H7_ADC3=y
-CONFIG_STM32H7_BBSRAM=y
-CONFIG_STM32H7_BBSRAM_FILES=5
-CONFIG_STM32H7_BDMA=y
-CONFIG_STM32H7_BKPSRAM=y
-CONFIG_STM32H7_DMA1=y
-CONFIG_STM32H7_DMA2=y
-CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
-CONFIG_STM32H7_I2C1=y
-CONFIG_STM32H7_I2C2=y
-CONFIG_STM32H7_I2C4=y
-CONFIG_STM32H7_I2C_DYNTIMEO=y
-CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
-CONFIG_STM32H7_OTGFS=y
-CONFIG_STM32H7_PROGMEM=y
-CONFIG_STM32H7_RTC=y
-CONFIG_STM32H7_RTC_HSECLOCK=y
-CONFIG_STM32H7_RTC_MAGIC_REG=1
-CONFIG_STM32H7_SAVE_CRASHDUMP=y
-CONFIG_STM32H7_SDMMC2=y
-CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32H7_SPI1=y
-CONFIG_STM32H7_SPI1_DMA=y
-CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI2=y
-CONFIG_STM32H7_SPI2_DMA=y
-CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
-CONFIG_STM32H7_SPI_DMA=y
-CONFIG_STM32H7_TIM12=y
-CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_TIM4=y
-CONFIG_STM32H7_TIM5=y
-CONFIG_STM32H7_UART5=y
-CONFIG_STM32H7_UART7=y
-CONFIG_STM32H7_UART8=y
-CONFIG_STM32H7_USART1=y
-CONFIG_STM32H7_USART2=y
-CONFIG_STM32H7_USART3=y
-CONFIG_STM32H7_USART6=y
-CONFIG_STM32H7_USART_BREAKS=y
-CONFIG_STM32H7_USART_INVERT=y
-CONFIG_STM32H7_USART_SINGLEWIRE=y
-CONFIG_STM32H7_USART_SWAP=y
-CONFIG_SYSTEM_CDCACM=y
-CONFIG_SYSTEM_NSH=y
-CONFIG_TASK_NAME_SIZE=24
-CONFIG_UART5_IFLOWCONTROL=y
-CONFIG_UART5_OFLOWCONTROL=y
-CONFIG_UART5_RXDMA=y
-CONFIG_UART5_TXBUFSIZE=3000
-CONFIG_UART5_TXDMA=y
-CONFIG_UART7_BAUD=57600
-CONFIG_UART7_IFLOWCONTROL=y
-CONFIG_UART7_OFLOWCONTROL=y
-CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_RXDMA=y
-CONFIG_UART7_TXBUFSIZE=3000
-CONFIG_UART7_TXDMA=y
-CONFIG_UART8_BAUD=57600
-CONFIG_UART8_RXBUFSIZE=600
-CONFIG_UART8_TXBUFSIZE=1500
-CONFIG_USART1_BAUD=57600
-CONFIG_USART1_RXBUFSIZE=600
-CONFIG_USART1_TXBUFSIZE=1500
-CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXBUFSIZE=600
-CONFIG_USART2_TXBUFSIZE=3000
-CONFIG_USART3_BAUD=57600
-CONFIG_USART3_RXBUFSIZE=180
-CONFIG_USART3_RXDMA=y
-CONFIG_USART3_SERIAL_CONSOLE=y
-CONFIG_USART3_TXBUFSIZE=1500
-CONFIG_USART3_TXDMA=y
-CONFIG_USART6_BAUD=57600
-CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_TXBUFSIZE=1500
-CONFIG_USBDEV=y
-CONFIG_USBDEV_BUSPOWERED=y
-CONFIG_USBDEV_MAXPOWER=500
-CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
-CONFIG_WATCHDOG=y
-CONFIG_WQUEUE_NOTIFIER=y
@@ -1,215 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The PX4 FMUV6C uses an STM32H753II has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743II, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * The PX4 FMUV6C has a test point on board, the BOOT0 pin is at ground so by
- * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
- * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
- *
- * The STM32H743II also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- *
- * The bootloader uses the first sector of the flash, which is 128K in length.
- */
-
-MEMORY
-{
-	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	flash (rx)  : ORIGIN = 0x08000000, LENGTH =  128K
-	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
-	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
-	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
-	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
-	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
-	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,223 +0,0 @@
-/****************************************************************************
- * scripts/script.ld
- *
- *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The PX4 FMUV6C uses an STM32H753II has 2048Kb of main FLASH memory.
- * The flash memory is partitioned into a User Flash memory and a System
- * Flash memory. Each of these memories has two banks:
- *
- *   1) User Flash memory:
- *
- *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
- *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
- *
- *   2) System Flash memory:
- *
- *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
- *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
- *
- *   3) User option bytes for user configuration, only in Bank 1.
- *
- * In the STM32H743II, two different boot spaces can be selected through
- * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
- * BOOT_ADD1 option bytes:
- *
- *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
- *      ST programmed value: Flash memory at 0x0800:0000
- *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
- *      ST programmed value: System bootloader at 0x1FF0:0000
- *
- * The PX4 FMUV6C has a test point on board, the BOOT0 pin is at ground so by
- * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
- * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
- *
- * The STM32H743II also has 1024Kb of data SRAM.
- * SRAM is split up into several blocks and into three power domains:
- *
- *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
- *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
- *
- *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
- *
- *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
- *           DTCM ports. The DTCM-RAM could be used for critical real-time
- *           data, such as interrupt service routines or stack / heap memory.
- *           Both DTCM-RAMs can be used in parallel (for load/store operations)
- *           thanks to the Cortex-M7 dual issue capability.
- *
- *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
- *
- *           This RAM is connected to ITCM 64-bit interface designed for
- *           execution of critical real-times routines by the CPU.
- *
- *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
- *      through D1 domain AXI bus matrix
- *
- *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
- *
- *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
- *      through D2 domain AHB bus matrix
- *
- *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
- *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
- *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
- *
- *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
- *
- *   4) AHB SRAM (D3 domain) accessible by most of system masters
- *      through D3 domain AHB bus matrix
- *
- *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
- *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address range.
- */
-
-MEMORY
-{
-	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	flash (rx)  : ORIGIN = 0x08020000, LENGTH = 1920K
-	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
-	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
-	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
-	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
-	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
-	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
-	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
-	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
-}
-
-OUTPUT_ARCH(arm)
-EXTERN(_vectors)
-ENTRY(_stext)
-
-/*
- * Ensure that abort() is present in the final object.  The exception handling
- * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
- */
-EXTERN(abort)
-EXTERN(_bootdelay_signature)
-EXTERN(board_get_manifest)
-
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		. = ALIGN(32);
-		/*
-		This signature provides the bootloader with a way to delay booting
-		*/
-		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
-		. += 8;
-		*(.text .text.*)
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-
-	} > flash
-
-	/*
-	 * Init functions (static constructors and the like)
-	 */
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		KEEP(*(.init_array .init_array.*))
-		_einit = ABSOLUTE(.);
-	} > flash
-
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Emit the the D3 power domain section for locating BDMA data */
-
-	.sram4_reserve (NOLOAD) :
-	{
-		*(.sram4)
-		. = ALIGN(4);
-		_sram4_heap_start = ABSOLUTE(.);
-	} > sram4
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
@@ -1,75 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2016 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
-	add_compile_definitions(BOOTLOADER)
-	add_library(drivers_board
-		bootloader_main.c
-		init.c
-		usb.c
-		timer_config.cpp
-	)
-	target_link_libraries(drivers_board
-		PRIVATE
-			nuttx_arch # sdio
-			nuttx_drivers # sdio
-			px4_layer #gpio
-			arch_io_pins # iotimer
-			bootloader
-	)
-	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
-
-else()
-	add_library(drivers_board
-		can.c
-		i2c.cpp
-		init.c
-		led.c
-		mtd.cpp
-		manifest.c
-		sdio.c
-		spi.cpp
-		timer_config.cpp
-		usb.c
-	)
-	add_dependencies(drivers_board arch_board_hw_info)
-
-	target_link_libraries(drivers_board
-		PRIVATE
-			arch_spi
-			arch_board_hw_info
-			drivers__led # drv_led_start
-			nuttx_arch # sdio
-			nuttx_drivers # sdio
-			px4_layer
-	)
-endif()
@@ -1,321 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * PX4FMU-v6c internal definitions
- */
-
-#pragma once
-
-/****************************************************************************************************
- * Included Files
- ****************************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-
-#include <stm32_gpio.h>
-
-/****************************************************************************************************
- * Definitions
- ****************************************************************************************************/
-
-#undef TRACE_PINS
-
-/* PX4IO connection configuration */
-
-#define BOARD_USES_PX4IO_VERSION       2
-#define PX4IO_SERIAL_DEVICE            "/dev/ttyS4"
-#define PX4IO_SERIAL_TX_GPIO           GPIO_USART6_TX
-#define PX4IO_SERIAL_RX_GPIO           GPIO_USART6_RX
-#define PX4IO_SERIAL_BASE              STM32_USART6_BASE
-#define PX4IO_SERIAL_VECTOR            STM32_IRQ_USART6
-#define PX4IO_SERIAL_TX_DMAMAP         DMAMAP_USART6_TX
-#define PX4IO_SERIAL_RX_DMAMAP         DMAMAP_USART6_RX
-#define PX4IO_SERIAL_RCC_REG           STM32_RCC_APB2ENR
-#define PX4IO_SERIAL_RCC_EN            RCC_APB2ENR_USART6EN
-#define PX4IO_SERIAL_CLOCK             STM32_PCLK2_FREQUENCY
-#define PX4IO_SERIAL_BITRATE           1500000               /* 1.5Mbps -> max rate for IO */
-
-/* PX4FMU GPIOs ***********************************************************************************/
-
-
-/* LEDs are driven with push pull Anodes to 3.3V */
-
-#define GPIO_nLED_RED        /* PD10 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10)
-#define GPIO_nLED_BLUE       /* PD11 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN11)
-
-#define BOARD_HAS_CONTROL_STATUS_LEDS      1
-#define BOARD_OVERLOAD_LED     LED_RED
-#define BOARD_ARMED_STATE_LED  LED_BLUE
-
-/*
- * ADC channels
- *
- * These are the channel numbers of the ADCs of the microcontroller that
- * can be used by the Px4 Firmware in the adc driver
- */
-
-/* ADC defines to be used in sensors.cpp to read from a particular channel */
-
-#define ADC1_CH(n)                  (n)
-
-/* N.B. there is no offset mapping needed for ADC3 because */
-#define ADC3_CH(n)                  (n)
-
-/* We are only use ADC3 for REV/VER. */
-
-/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
-
-#define PX4_ADC_GPIO  \
-	/* PC4  */  GPIO_ADC12_INP4,   \
-	/* PB1  */  GPIO_ADC12_INP5,   \
-	/* PC5  */  GPIO_ADC12_INP8,   \
-	/* PC0  */  GPIO_ADC123_INP10, \
-	/* PC1  */  GPIO_ADC123_INP11, \
-	/* PA2  */  GPIO_ADC12_INP14,  \
-	/* PA4  */  GPIO_ADC12_INP18   \
-
-/* Define Channel numbers must match above GPIO pin IN(n)*/
-#define ADC_BATTERY1_CURRENT_CHANNEL            /* PC4 */  ADC1_CH(4)
-#define ADC_BATTERY2_VOLTAGE_CHANNEL            /* PB1 */  ADC1_CH(5)
-#define ADC_BATTERY1_VOLTAGE_CHANNEL            /* PC5 */  ADC1_CH(8)
-#define ADC_HW_REV_SENSE_CHANNEL                /* PC0 */  ADC3_CH(10)
-#define ADC_HW_VER_SENSE_CHANNEL                /* PC1 */  ADC3_CH(11)
-#define ADC_BATTERY2_CURRENT_CHANNEL            /* PA2 */  ADC1_CH(14)
-#define ADC_SCALED_V5_CHANNEL                   /* PA4 */  ADC1_CH(18)
-
-#define ADC_CHANNELS \
-	((1 << ADC_BATTERY1_CURRENT_CHANNEL) | \
-	 (1 << ADC_BATTERY2_VOLTAGE_CHANNEL) | \
-	 (1 << ADC_BATTERY1_VOLTAGE_CHANNEL) | \
-	 (1 << ADC_BATTERY2_CURRENT_CHANNEL) | \
-	 (1 << ADC_SCALED_V5_CHANNEL       ))
-
-#define HW_REV_VER_ADC_BASE STM32_ADC3_BASE
-
-#define SYSTEM_ADC_BASE STM32_ADC1_BASE
-
-/* HW has to large of R termination on ADC todo:change when HW value is chosen */
-#define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
-
-/* HW Version and Revision drive signals Default to 1 to detect */
-#define BOARD_HAS_HW_VERSIONING
-
-#define GPIO_HW_VER_REV_DRIVE  /* PE12 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN12)
-#define GPIO_HW_REV_SENSE      /* PC0 */  GPIO_ADC123_INP10
-#define GPIO_HW_VER_SENSE      /* PC1 */  GPIO_ADC123_INP11
-#define HW_INFO_INIT           {'V','6','C','x', 'x',0}
-#define HW_INFO_INIT_VER       3 /* Offset in above string of the VER */
-#define HW_INFO_INIT_REV       4 /* Offset in above string of the REV */
-
-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2 // Rev 0, 10 Sensor sets
-//                 Base/FMUM
-#define V6C00   HW_VER_REV(0x0,0x0) // FMUV6C,                 Rev 0
-#define V6C10   HW_VER_REV(0x1,0x0) // NO PX4IO,               Rev 0
-
-
-/* HEATER
- * PWM in future
- */
-#define GPIO_HEATER_OUTPUT   /* PB9  T17CH1 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
-#define HEATER_OUTPUT_EN(on_true)	       px4_arch_gpiowrite(GPIO_HEATER_OUTPUT, (on_true))
-
-/* PWM
- */
-#define DIRECT_PWM_OUTPUT_CHANNELS   8
-
-
-/* Power supply control and monitoring GPIOs */
-
-#define GPIO_nPOWER_IN_A                /* PA15  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN15)
-#define GPIO_nPOWER_IN_B                /* PB12  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN12)
-#define GPIO_nPOWER_IN_C                /* PE15  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)
-
-#define GPIO_nVDD_BRICK1_VALID          GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */
-#define GPIO_nVDD_BRICK2_VALID          GPIO_nPOWER_IN_B /* Brick 2 Is Chosen  */
-#define BOARD_NUMBER_BRICKS             2
-#define GPIO_nVDD_USB_VALID             GPIO_nPOWER_IN_C /* USB     Is Chosen */
-
-#define GPIO_VDD_5V_PERIPH_nEN          /* PE2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
-#define GPIO_VDD_5V_PERIPH_nOC          /* PE3  */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTE|GPIO_PIN3)
-#define GPIO_VDD_5V_HIPOWER_nEN         /* PC10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN10)
-#define GPIO_VDD_5V_HIPOWER_nOC         /* PC11 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTC|GPIO_PIN11)
-#define GPIO_VDD_3V3_SENSORS_EN         /* PB2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN2)
-
-/* Define True logic Power Control in arch agnostic form */
-
-#define VDD_5V_PERIPH_EN(on_true)          px4_arch_gpiowrite(GPIO_VDD_5V_PERIPH_nEN, !(on_true))
-#define VDD_5V_HIPOWER_EN(on_true)         px4_arch_gpiowrite(GPIO_VDD_5V_HIPOWER_nEN, !(on_true))
-#define VDD_3V3_SENSORS_EN(on_true)       px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS4_EN, (on_true))
-
-/* Tone alarm output */
-
-#define TONE_ALARM_TIMER        3  /* Timer 3 */
-#define TONE_ALARM_CHANNEL      3  /* PB0 GPIO_TIM3_CH3OUT_1 */
-
-#define GPIO_BUZZER_1           /* PPB0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0)
-
-#define GPIO_TONE_ALARM_IDLE    GPIO_BUZZER_1
-#define GPIO_TONE_ALARM         GPIO_TIM3_CH3OUT_1
-
-/* USB OTG FS
- *
- * PA9  OTG_FS_VBUS VBUS sensing
- */
-#define GPIO_OTGFS_VBUS         /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
-
-/* High-resolution timer */
-#define HRT_TIMER               8  /* use timer8 for the HRT */
-#define HRT_TIMER_CHANNEL       3  /* use capture/compare channel 3 */
-
-/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 3 */
-#define PWMIN_TIMER                       4
-#define PWMIN_TIMER_CHANNEL    /* T4C3 */ 3
-#define GPIO_PWM_IN            /* PD14 */ GPIO_TIM4_CH3IN_2
-
-#define SDIO_SLOTNO                    0  /* Only one slot */
-#define SDIO_MINOR                     0
-
-/* SD card bringup does not work if performed on the IDLE thread because it
- * will cause waiting.  Use either:
- *
- *  CONFIG_LIB_BOARDCTL=y, OR
- *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
- */
-
-#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
-   !defined(CONFIG_BOARD_INITTHREAD)
-#  warning SDIO initialization cannot be perfomed on the IDLE thread
-#endif
-
-/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
- * this board support the ADC system_power interface, and therefore
- * provides the true logic GPIO BOARD_ADC_xxxx macros.
- */
-#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
-#define BOARD_ADC_USB_VALID     (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
-
-/* FMUv6C never powers off the Servo rail */
-
-#define BOARD_ADC_SERVO_VALID     (1)
-
-#define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
-#define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
-
-#define BOARD_ADC_PERIPH_5V_OC  (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_nOC))
-#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_HIPOWER_nOC))
-
-
-/* This board provides a DMA pool and APIs */
-#define BOARD_DMA_ALLOC_POOL_SIZE 5120
-
-/* This board provides the board_on_reset interface */
-
-#define BOARD_HAS_ON_RESET 1
-
-#define PX4_GPIO_INIT_LIST { \
-		PX4_ADC_GPIO,                     \
-		GPIO_HW_VER_REV_DRIVE,            \
-		GPIO_CAN1_TX,                     \
-		GPIO_CAN1_RX,                     \
-		GPIO_CAN2_TX,                     \
-		GPIO_CAN2_RX,                     \
-		GPIO_HEATER_OUTPUT,               \
-		GPIO_nPOWER_IN_A,                 \
-		GPIO_nPOWER_IN_B,                 \
-		GPIO_nPOWER_IN_C,                 \
-		GPIO_VDD_5V_PERIPH_nEN,           \
-		GPIO_VDD_5V_PERIPH_nOC,           \
-		GPIO_VDD_5V_HIPOWER_nEN,          \
-		GPIO_VDD_5V_HIPOWER_nOC,          \
-		GPIO_VDD_3V3_SENSORS_EN,          \
-		GPIO_TONE_ALARM_IDLE,             \
-	}
-
-#define BOARD_ENABLE_CONSOLE_BUFFER
-
-#define PX4_I2C_BUS_MTD      4,5
-
-
-#define BOARD_NUM_IO_TIMERS 5
-
-__BEGIN_DECLS
-
-/****************************************************************************************************
- * Public Types
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Public data
- ****************************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/****************************************************************************************************
- * Public Functions
- ****************************************************************************************************/
-
-/****************************************************************************
- * Name: stm32_sdio_initialize
- *
- * Description:
- *   Initialize SDIO-based MMC/SD card support
- *
- ****************************************************************************/
-
-int stm32_sdio_initialize(void);
-
-/****************************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
- *
- ****************************************************************************************************/
-
-extern void stm32_spiinitialize(void);
-
-extern void stm32_usbinitialize(void);
-
-extern void board_peripheral_reset(int ms);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS
@@ -1,62 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2019, 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file bootloader_main.c
- *
- * FMU-specific early startup code for bootloader
-*/
-
-#include "board_config.h"
-#include "bl.h"
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <chip.h>
-#include <stm32_uart.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-#include <px4_platform_common/init.h>
-
-extern int sercon_main(int c, char **argv);
-
-void board_late_initialize(void)
-{
-	sercon_main(0, NULL);
-}
-
-extern void sys_tick_handler(void);
-void board_timerhook(void)
-{
-	sys_tick_handler();
-}
@@ -1,128 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file px4fmu_can.c
- *
- * Board-specific CAN functions.
- */
-
-#ifdef CONFIG_CAN
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "arm_arch.h"
-
-#include "chip.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-#ifdef CONFIG_CAN
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-
-#endif
-
-#endif /* CONFIG_CAN */
@@ -1,128 +0,0 @@
-/*
- * hw_config.h
- *
- *  Created on: May 17, 2015
- *      Author: david_s5
- */
-
-#ifndef HW_CONFIG_H_
-#define HW_CONFIG_H_
-
-/****************************************************************************
- * 10-8--2016:
- *  To simplify the ripple effect on the tools, we will be using
- *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
- *  moving forward all Bootloaders must contain the prefix "PX4 BL "
- *  in the USBDEVICESTRING
- *  This Change will be made in an upcoming BL release
- ****************************************************************************/
-/*
- * Define usage to configure a bootloader
- *
- *
- * Constant                example          Usage
- * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
- * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
- * BOARD_FMUV2
- * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
- * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
- * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
- * USBPRODUCTID         0x0011                - PID Should match defconfig
- * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
- *                                               delay provided by an APP FW
- * BOARD_TYPE           9                     - Must match .prototype boad_id
- * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
- * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
- * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
- * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
- *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
- *                                              programmatically
- *
- * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
- *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
- *                                               during a FW upgrade.
- *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
- *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
- *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
- *                                               in the table.
- *
- * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
- *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
- *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
- *                                                                        and hence the address space of FLASH to erase and program.
- * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
- * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
- *
- * * Other defines are somewhat self explanatory.
- */
-
-/* Boot device selection list*/
-#define USB0_DEV       0x01
-#define SERIAL0_DEV    0x02
-#define SERIAL1_DEV    0x04
-
-#define APP_LOAD_ADDRESS               0x08020000
-#define BOOTLOADER_DELAY               5000
-#define INTERFACE_USB                  1
-#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
-#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
-
-//#define USE_VBUS_PULL_DOWN
-#define INTERFACE_USART                1
-#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
-#define BOOT_DELAY_ADDRESS             0x000001a0
-#define BOARD_TYPE                     56
-#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
-#define BOARD_FLASH_SECTORS            (15)
-#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)
-
-#define OSC_FREQ                       16
-
-#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
-#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_RED // RED
-#define BOARD_LED_ON                   0
-#define BOARD_LED_OFF                  1
-
-#define SERIAL_BREAK_DETECT_DISABLED   1
-
-/*
- * Uncommenting this allows to force the bootloader through
- * a PWM output pin. As this can accidentally initialize
- * an ESC prematurely, it is not recommended. This feature
- * has not been used and hence defaults now to off.
- *
- * # define BOARD_FORCE_BL_PIN_OUT         (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN14)
- * # define BOARD_FORCE_BL_PIN_IN          (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
- *
- * # define BOARD_POWER_PIN_OUT           (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
- * # define BOARD_POWER_ON                 1
- * # define BOARD_POWER_OFF                0
- * # undef  BOARD_POWER_PIN_RELEASE        // Leave pin enabling Power - un comment to release (disable power)
- *
-*/
-
-#if !defined(ARCH_SN_MAX_LENGTH)
-# define ARCH_SN_MAX_LENGTH 12
-#endif
-
-#if !defined(APP_RESERVATION_SIZE)
-#  define APP_RESERVATION_SIZE 0
-#endif
-
-#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
-#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
-#endif
-
-#if !defined(USB_DATA_ALIGN)
-# define USB_DATA_ALIGN
-#endif
-
-#ifndef BOOT_DEVICES_SELECTION
-#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
-#endif
-
-#ifndef BOOT_DEVICES_FILTER_ONUSB
-#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
-#endif
-
-#endif /* HW_CONFIG_H_ */
@@ -1,40 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/i2c_hw_description.h>
-
-constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
-	initI2CBusExternal(1),
-	initI2CBusExternal(2),
-	initI2CBusInternal(4),
-};
@@ -1,259 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2012-2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file init.c
- *
- * PX4FMU-specific early startup code.  This file implements the
- * board_app_initialize() function that is called early by nsh during startup.
- *
- * Code here is run before the rcS script is invoked; it should start required
- * subsystems and perform board-specific initialization.
- */
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include "board_config.h"
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-#include <debug.h>
-#include <errno.h>
-#include <syslog.h>
-
-#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <nuttx/spi/spi.h>
-#include <nuttx/sdio.h>
-#include <nuttx/mmcsd.h>
-#include <nuttx/analog/adc.h>
-#include <nuttx/mm/gran.h>
-#include <chip.h>
-#include <stm32_uart.h>
-#include <arch/board/board.h>
-#include "arm_internal.h"
-
-#include <drivers/drv_hrt.h>
-#include <drivers/drv_board_led.h>
-#include <systemlib/px4_macros.h>
-#include <px4_arch/io_timer.h>
-#include <px4_platform_common/init.h>
-#include <px4_platform/gpio.h>
-#include <px4_platform/board_determine_hw_info.h>
-#include <px4_platform/board_dma_alloc.h>
-
-/****************************************************************************
- * Pre-Processor Definitions
- ****************************************************************************/
-
-/* Configuration ************************************************************/
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-__END_DECLS
-
-
-/************************************************************************************
- * Name: board_peripheral_reset
- *
- * Description:
- *
- ************************************************************************************/
-__EXPORT void board_peripheral_reset(int ms)
-{
-	/* set the peripheral rails off */
-
-	VDD_5V_PERIPH_EN(false);
-	board_control_spi_sensors_power(false, 0xffff);
-
-	/* wait for the peripheral rail to reach GND */
-	usleep(ms * 1000);
-	syslog(LOG_DEBUG, "reset done, %d ms\n", ms);
-
-	/* re-enable power */
-
-	/* switch the peripheral rail back on */
-	board_control_spi_sensors_power(true, 0xffff);
-	VDD_5V_PERIPH_EN(true);
-
-}
-
-/************************************************************************************
- * Name: board_on_reset
- *
- * Description:
- * Optionally provided function called on entry to board_system_reset
- * It should perform any house keeping prior to the rest.
- *
- * status - 1 if resetting to boot loader
- *          0 if just resetting
- *
- ************************************************************************************/
-__EXPORT void board_on_reset(int status)
-{
-	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
-		px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
-	}
-
-	if (status >= 0) {
-		up_mdelay(6);
-	}
-}
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-__EXPORT void
-stm32_boardinitialize(void)
-{
-	board_on_reset(-1); /* Reset PWM first thing */
-
-	/* configure LEDs */
-
-	board_autoled_initialize();
-
-	/* configure pins */
-
-	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	px4_gpio_init(gpio, arraySize(gpio));
-
-	/* configure USB interfaces */
-
-	stm32_usbinitialize();
-}
-
-/****************************************************************************
- * Name: board_app_initialize
- *
- * Description:
- *   Perform application specific initialization.  This function is never
- *   called directly from application code, but only indirectly via the
- *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
- *
- * Input Parameters:
- *   arg - The boardctl() argument is passed to the board_app_initialize()
- *         implementation without modification.  The argument has no
- *         meaning to NuttX; the meaning of the argument is a contract
- *         between the board-specific initalization logic and the the
- *         matching application logic.  The value cold be such things as a
- *         mode enumeration value, a set of DIP switch switch settings, a
- *         pointer to configuration data read from a file or serial FLASH,
- *         or whatever you would like to do with it.  Every implementation
- *         should accept zero/NULL as a default configuration.
- *
- * Returned Value:
- *   Zero (OK) is returned on success; a negated errno value is returned on
- *   any failure to indicate the nature of the failure.
- *
- ****************************************************************************/
-
-__EXPORT int board_app_initialize(uintptr_t arg)
-{
-#if !defined(BOOTLOADER)
-
-	/* Power on Interfaces */
-	VDD_5V_PERIPH_EN(true);
-	VDD_5V_HIPOWER_EN(true);
-
-	/* Need hrt running before using the ADC */
-
-	px4_platform_init();
-
-
-	if (OK == board_determine_hw_info()) {
-		syslog(LOG_INFO, "[boot] Rev 0x%1x : Ver 0x%1x %s\n", board_get_hw_revision(), board_get_hw_version(),
-		       board_get_hw_type_name());
-
-	} else {
-		syslog(LOG_ERR, "[boot] Failed to read HW revision and version\n");
-	}
-
-	stm32_spiinitialize();
-
-	board_spi_reset(10, 0xffff);
-
-	/* configure the DMA allocator */
-
-	if (board_dma_alloc_init() < 0) {
-		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
-	}
-
-#  if defined(SERIAL_HAVE_RXDMA)
-	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
-	static struct hrt_call serial_dma_call;
-	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
-#  endif
-
-	/* initial LED state */
-	drv_led_start();
-	led_off(LED_RED);
-	led_off(LED_BLUE);
-
-	if (board_hardfault_init(2, true) != 0) {
-		led_on(LED_RED);
-	}
-
-#  ifdef CONFIG_MMCSD
-	int ret = stm32_sdio_initialize();
-
-	if (ret != OK) {
-		led_on(LED_RED);
-	}
-
-#  endif /* CONFIG_MMCSD */
-
-	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
-#endif
-	return OK;
-}
@@ -1,235 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file px4fmu2_led.c
- *
- * PX4FMU LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "chip.h"
-#include "stm32_gpio.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-#include <arch/board/board.h>
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-extern void led_toggle(int led);
-__END_DECLS
-
-#ifdef CONFIG_ARCH_LEDS
-static bool nuttx_owns_leds = true;
-//                                B  R  S  G
-//                                0  1  2  3
-static const uint8_t xlatpx4[] = {1, 2, 4, 0};
-#  define xlat(p) xlatpx4[(p)]
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
-	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
-	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
-	GPIO_nSAFETY_SWITCH_LED_OUT,  // Indexed by LED_SAFETY by xlatpx4
-};
-
-#else
-
-#  define xlat(p) (p)
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
-	GPIO_nLED_RED,                      // Indexed by LED_RED, LED_AMBER
-	0,                                  // Indexed by LED_SAFETY (defaulted to an input)
-	0,                                  // Indexed by LED_GREEN
-};
-
-#endif
-
-__EXPORT void led_init(void)
-{
-	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
-		if (g_ledmap[l] != 0) {
-			stm32_configgpio(g_ledmap[l]);
-		}
-	}
-}
-
-static void phy_set_led(int led, bool state)
-{
-	/* Drive Low to switch on */
-
-	if (g_ledmap[led] != 0) {
-		stm32_gpiowrite(g_ledmap[led], !state);
-	}
-}
-
-static bool phy_get_led(int led)
-{
-	/* If Low it is on */
-	if (g_ledmap[led] != 0) {
-		return !stm32_gpioread(g_ledmap[led]);
-	}
-
-	return false;
-}
-
-__EXPORT void led_on(int led)
-{
-	phy_set_led(xlat(led), true);
-}
-
-__EXPORT void led_off(int led)
-{
-	phy_set_led(xlat(led), false);
-}
-
-__EXPORT void led_toggle(int led)
-{
-	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
-}
-
-#ifdef CONFIG_ARCH_LEDS
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: board_autoled_initialize
- ****************************************************************************/
-
-void board_autoled_initialize(void)
-{
-	led_init();
-}
-
-/****************************************************************************
- * Name: board_autoled_on
- ****************************************************************************/
-
-void board_autoled_on(int led)
-{
-	if (!nuttx_owns_leds) {
-		return;
-	}
-
-	switch (led) {
-	default:
-		break;
-
-	case LED_HEAPALLOCATE:
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_IRQSENABLED:
-		phy_set_led(BOARD_LED_BLUE, false);
-		phy_set_led(BOARD_LED_GREEN, true);
-		break;
-
-	case LED_STACKCREATED:
-		phy_set_led(BOARD_LED_GREEN, true);
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_INIRQ:
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_SIGNAL:
-		phy_set_led(BOARD_LED_GREEN, true);
-		break;
-
-	case LED_ASSERTION:
-		phy_set_led(BOARD_LED_RED, true);
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_PANIC:
-		phy_set_led(BOARD_LED_RED, true);
-		break;
-
-	case LED_IDLE : /* IDLE */
-		phy_set_led(BOARD_LED_RED, true);
-		break;
-	}
-}
-
-/****************************************************************************
- * Name: board_autoled_off
- ****************************************************************************/
-
-void board_autoled_off(int led)
-{
-	if (!nuttx_owns_leds) {
-		return;
-	}
-
-	switch (led) {
-	default:
-		break;
-
-	case LED_SIGNAL:
-		phy_set_led(BOARD_LED_GREEN, false);
-		break;
-
-	case LED_INIRQ:
-		phy_set_led(BOARD_LED_BLUE, false);
-		break;
-
-	case LED_ASSERTION:
-		phy_set_led(BOARD_LED_RED, false);
-		phy_set_led(BOARD_LED_BLUE, false);
-		break;
-
-	case LED_PANIC:
-		phy_set_led(BOARD_LED_RED, false);
-		break;
-
-	case LED_IDLE : /* IDLE */
-		phy_set_led(BOARD_LED_RED, false);
-		break;
-	}
-}
-
-#endif /* CONFIG_ARCH_LEDS */
@@ -1,147 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2018, 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file manifest.c
- *
- * This module supplies the interface to the manifest of hardware that is
- * optional and dependent on the HW REV and HW VER IDs
- *
- * The manifest allows the system to know whether a hardware option
- * say for example the PX4IO is an no-pop option vs it is broken.
- *
- */
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-#include <board_config.h>
-
-#include <inttypes.h>
-#include <stdbool.h>
-#include <syslog.h>
-
-#include "systemlib/px4_macros.h"
-
-/****************************************************************************
- * Pre-Processor Definitions
- ****************************************************************************/
-
-typedef struct {
-	uint32_t                hw_ver_rev; /* the version and revision */
-	const px4_hw_mft_item_t *mft;       /* The first entry */
-	uint32_t                entries;    /* the lenght of the list */
-} px4_hw_mft_list_entry_t;
-
-typedef px4_hw_mft_list_entry_t *px4_hw_mft_list_entry;
-#define px4_hw_mft_list_uninitialized (px4_hw_mft_list_entry) -1
-
-static const px4_hw_mft_item_t device_unsupported = {0, 0, 0};
-
-// List of components on a specific board configuration
-// The index of those components is given by the enum (px4_hw_mft_item_id_t)
-// declared in board_common.h
-static const px4_hw_mft_item_t hw_mft_list_v0600[] = {
-	{
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_onboard,
-	},
-};
-
-static const px4_hw_mft_item_t hw_mft_list_v0610[] = {
-	{
-		.present     = 0,
-		.mandatory   = 0,
-		.connection  = px4_hw_con_unknown,
-	},
-	{
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_onboard,
-	},
-};
-
-
-static px4_hw_mft_list_entry_t mft_lists[] = {
-//  ver_rev
-	{V6C00, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)},
-	{V6C10, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO
-};
-
-/************************************************************************************
- * Name: board_query_manifest
- *
- * Description:
- *   Optional returns manifest item.
- *
- * Input Parameters:
- *   manifest_id - the ID for the manifest item to retrieve
- *
- * Returned Value:
- *   0 - item is not in manifest => assume legacy operations
- *   pointer to a manifest item
- *
- ************************************************************************************/
-
-__EXPORT px4_hw_mft_item board_query_manifest(px4_hw_mft_item_id_t id)
-{
-	static px4_hw_mft_list_entry boards_manifest = px4_hw_mft_list_uninitialized;
-
-	if (boards_manifest == px4_hw_mft_list_uninitialized) {
-		uint32_t ver_rev = board_get_hw_version() << 8;
-		ver_rev |= board_get_hw_revision();
-
-		for (unsigned i = 0; i < arraySize(mft_lists); i++) {
-			if (mft_lists[i].hw_ver_rev == ver_rev) {
-				boards_manifest = &mft_lists[i];
-				break;
-			}
-		}
-
-		if (boards_manifest == px4_hw_mft_list_uninitialized) {
-			syslog(LOG_ERR, "[boot] Board %4" PRIx32 " is not supported!\n", ver_rev);
-		}
-	}
-
-	px4_hw_mft_item rv = &device_unsupported;
-
-	if (boards_manifest != px4_hw_mft_list_uninitialized &&
-	    id < boards_manifest->entries) {
-		rv = &boards_manifest->mft[id];
-	}
-
-	return rv;
-}
@@ -1,104 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <nuttx/spi/spi.h>
-#include <px4_platform_common/px4_manifest.h>
-//                                                              KiB BS    nB
-static const px4_mft_device_t spi2 = {             // FM25V02A on FMUM 32K 512 X 64
-	.bus_type = px4_mft_device_t::SPI,
-	.devid    = SPIDEV_FLASH(0)
-};
-
-static const px4_mft_device_t i2c4 = {             // 24LC64T on IMU   8K 32 X 256
-	.bus_type =  px4_mft_device_t::I2C,
-	.devid    =  PX4_MK_I2C_DEVID(4, 0x50)
-};
-
-
-static const px4_mtd_entry_t fmum_fram = {
-	.device = &spi2,
-	.npart = 2,
-	.partd = {
-		{
-			.type = MTD_PARAMETERS,
-			.path = "/fs/mtd_params",
-			.nblocks = 32
-		},
-		{
-			.type = MTD_WAYPOINTS,
-			.path = "/fs/mtd_waypoints",
-			.nblocks = 32
-
-		}
-	},
-};
-
-static const px4_mtd_entry_t imu_eeprom = {
-	.device = &i2c4,
-	.npart = 2,
-	.partd = {
-		{
-			.type = MTD_CALDATA,
-			.path = "/fs/mtd_caldata",
-			.nblocks = 248
-		},
-		{
-			.type = MTD_ID,
-			.path = "/fs/mtd_id",
-			.nblocks = 8 // 256 = 32 * 8
-		}
-	},
-};
-
-static const px4_mtd_manifest_t board_mtd_config = {
-	.nconfigs   = 2,
-	.entries = {
-		&fmum_fram,
-		&imu_eeprom
-	}
-};
-
-static const px4_mft_entry_s mtd_mft = {
-	.type = MTD,
-	.pmft = (void *) &board_mtd_config,
-};
-
-static const px4_mft_s mft = {
-	.nmft = 1,
-	.mfts = &mtd_mft
-};
-
-const px4_mft_s *board_get_manifest(void)
-{
-	return &mft;
-}
@@ -1,177 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-#include <board_config.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <debug.h>
-#include <errno.h>
-
-#include <nuttx/sdio.h>
-#include <nuttx/mmcsd.h>
-
-#include "chip.h"
-#include "board_config.h"
-#include "stm32_gpio.h"
-#include "stm32_sdmmc.h"
-
-#ifdef CONFIG_MMCSD
-
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/* Card detections requires card support and a card detection GPIO */
-
-#define HAVE_NCD   1
-#if !defined(GPIO_SDMMC1_NCD)
-#  undef HAVE_NCD
-#endif
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-static FAR struct sdio_dev_s *sdio_dev;
-#ifdef HAVE_NCD
-static bool g_sd_inserted = 0xff; /* Impossible value */
-#endif
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: stm32_ncd_interrupt
- *
- * Description:
- *   Card detect interrupt handler.
- *
- ****************************************************************************/
-
-#ifdef HAVE_NCD
-static int stm32_ncd_interrupt(int irq, FAR void *context)
-{
-	bool present;
-
-	present = !stm32_gpioread(GPIO_SDMMC1_NCD);
-
-	if (sdio_dev && present != g_sd_inserted) {
-		sdio_mediachange(sdio_dev, present);
-		g_sd_inserted = present;
-	}
-
-	return OK;
-}
-#endif
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: stm32_sdio_initialize
- *
- * Description:
- *   Initialize SDIO-based MMC/SD card support
- *
- ****************************************************************************/
-
-int stm32_sdio_initialize(void)
-{
-	int ret;
-
-#ifdef HAVE_NCD
-	/* Card detect */
-
-	bool cd_status;
-
-	/* Configure the card detect GPIO */
-
-	stm32_configgpio(GPIO_SDMMC1_NCD);
-
-	/* Register an interrupt handler for the card detect pin */
-
-	stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
-#endif
-
-	/* Mount the SDIO-based MMC/SD block driver */
-	/* First, get an instance of the SDIO interface */
-
-	finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
-
-	sdio_dev = sdio_initialize(SDIO_SLOTNO);
-
-	if (!sdio_dev) {
-		syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
-		return -ENODEV;
-	}
-
-	/* Now bind the SDIO interface to the MMC/SD driver */
-
-	finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
-
-	ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
-
-	if (ret != OK) {
-		syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
-		return ret;
-	}
-
-	finfo("Successfully bound SDIO to the MMC/SD driver\n");
-
-#ifdef HAVE_NCD
-	/* Use SD card detect pin to check if a card is g_sd_inserted */
-
-	cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
-	finfo("Card detect : %d\n", cd_status);
-
-	sdio_mediachange(sdio_dev, cd_status);
-#else
-	/* Assume that the SD card is inserted.  What choice do we have? */
-
-	sdio_mediachange(sdio_dev, true);
-#endif
-
-	return OK;
-}
-
-#endif /* CONFIG_MMCSD */
@@ -1,61 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020, 2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSIONS] = {
-	initSPIHWVersion(V6C00, {
-		initSPIBus(SPI::Bus::SPI1, {
-			initSPIDevice(DRV_GYR_DEVTYPE_BMI055,  SPI::CS{GPIO::PortC, GPIO::Pin14}, SPI::DRDY{GPIO::PortE, GPIO::Pin5}),
-			initSPIDevice(DRV_ACC_DEVTYPE_BMI055,  SPI::CS{GPIO::PortC, GPIO::Pin15}, SPI::DRDY{GPIO::PortE, GPIO::Pin4}),
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortC, GPIO::Pin13}, SPI::DRDY{GPIO::PortE, GPIO::Pin6}),
-		}, {GPIO::PortB, GPIO::Pin2}),
-		initSPIBus(SPI::Bus::SPI2, {
-			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortD, GPIO::Pin4})
-		}),
-	}),
-	initSPIHWVersion(V6C10, {
-		initSPIBus(SPI::Bus::SPI1, {
-			initSPIDevice(DRV_GYR_DEVTYPE_BMI055,  SPI::CS{GPIO::PortC, GPIO::Pin14}, SPI::DRDY{GPIO::PortE, GPIO::Pin5}),
-			initSPIDevice(DRV_ACC_DEVTYPE_BMI055,  SPI::CS{GPIO::PortC, GPIO::Pin15}, SPI::DRDY{GPIO::PortE, GPIO::Pin4}),
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortC, GPIO::Pin13}, SPI::DRDY{GPIO::PortE, GPIO::Pin6}),
-		}, {GPIO::PortB, GPIO::Pin2}),
-		initSPIBus(SPI::Bus::SPI2, {
-			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortD, GPIO::Pin4})
-		}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses_all_hw);
@@ -1,73 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/io_timer_hw_description.h>
-
-/* Timer allocation
- *
- * TIM1_CH1  T FMU_CH1
- * TIM1_CH2  T FMU_CH2
- * TIM1_CH3  T FMU_CH3
- * TIM1_CH4  T FMU_CH4
- *
- * TIM4_CH3  T FMU_CH5
- * TIM4_CH4  T FMU_CH6
- *
- * TIM5_CH1  T FMU_CH7
- * TIM5_CH2  T FMU_CH8
- *
- * TIM17_CH1 T HEATER                 > PWM OUT or GPIO
- *
- * TIM3_CH3  T BUZZER_1              - Driven by other driver
- */
-
-constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
-	initIOTimer(Timer::Timer1, DMA{DMA::Index1}),
-	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
-	initIOTimer(Timer::Timer5),
-	initIOTimer(Timer::Timer17),
-};
-
-constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortA, GPIO::Pin8}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}),
-	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
-	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel4}, {GPIO::PortD, GPIO::Pin15}),
-	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
-	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel2}, {GPIO::PortA, GPIO::Pin1}),
-};
-
-constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
-	initIOTimerChannelMapping(io_timers, timer_io_channels);
@@ -1,105 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2016 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file px4fmu_usb.c
- *
- * Board-specific USB functions.
- */
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <debug.h>
-
-#include <nuttx/usb/usbdev.h>
-#include <nuttx/usb/usbdev_trace.h>
-
-#include <arm_arch.h>
-#include <chip.h>
-#include <stm32_gpio.h>
-#include <stm32_otg.h>
-#include "board_config.h"
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: stm32_usbinitialize
- *
- * Description:
- *   Called to setup USB-related GPIO pins for the PX4FMU board.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_usbinitialize(void)
-{
-	/* The OTG FS has an internal soft pull-up */
-
-	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
-
-#ifdef CONFIG_STM32H7_OTGFS
-	stm32_configgpio(GPIO_OTGFS_VBUS);
-#endif
-}
-
-/************************************************************************************
- * Name:  stm32_usbsuspend
- *
- * Description:
- *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
- *   used.  This function is called whenever the USB enters or leaves suspend mode.
- *   This is an opportunity for the board logic to shutdown clocks, power, etc.
- *   while the USB is suspended.
- *
- ************************************************************************************/
-
-__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
-{
-	uinfo("resume: %d\n", resume);
-}
@@ -25,23 +25,17 @@ then
 	ina238 -X -b 2 -t 2 -k start
 fi

-if ver hwtypecmp V6X04 V6X14
-then
-	# Internal SPI bus ICM20649
-	icm20649 -s -R 6 start
-else
 # Internal SPI BMI088
-	bmi088 -A -R 4 -s start
-	bmi088 -G -R 4 -s start
-fi
+bmi088 -A -R 4 -s start
+bmi088 -G -R 4 -s start

 # Internal SPI bus ICM42688p
 icm42688p -R 6 -s start

-if ver hwtypecmp V6X03 V6X13 V6X04 V6X14
+if ver hwtypecmp V6X03 V6X13
 then
 	# Internal SPI bus ICM-42670-P (hard-mounted)
-	icm42670p -R 10 -s start
+	icm42670p -R 14 -s start
 else
 	# Internal SPI bus ICM-20649 (hard-mounted)
 	icm20649 -R 14 -s start
@@ -215,15 +215,13 @@
 #define HW_INFO_INIT_VER       3 /* Offset in above string of the VER */
 #define HW_INFO_INIT_REV       4 /* Offset in above string of the REV */

-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 3 // Rev 0 and Rev 3,4 Sensor sets
+#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2 // Rev 0 and Rev 3 Sensor sets
 //                 Base/FMUM
 #define V6X00   HW_VER_REV(0x0,0x0) // FMUV6X,                 Rev 0
 #define V6X01   HW_VER_REV(0x0,0x1) // FMUV6X,     BMI388 I2C2 Rev 1
 #define V6X03   HW_VER_REV(0x0,0x3) // FMUV6X,     Sensor Set  Rev 3
-#define V6X04   HW_VER_REV(0x0,0x4) // FMUV6X,     Sensor Set  Rev 4
 #define V6X10   HW_VER_REV(0x1,0x0) // NO PX4IO,               Rev 0
 #define V6X13   HW_VER_REV(0x1,0x3) // NO PX4IO,   Sensor Set  Rev 3
-#define V6X14   HW_VER_REV(0x1,0x4) // NO PX4IO,   Sensor Set  Rev 4


 /* HEATER
@@ -102,8 +102,6 @@ static px4_hw_mft_list_entry_t mft_lists[] = {
 	{V6X01, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2
 	{V6X03, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 3
 	{V6X13, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 3
-	{V6X04, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 4
-	{V6X14, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 4
 };

 /************************************************************************************
@@ -83,29 +83,6 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
 			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
 		}),
 	}),
-
-	initSPIHWVersion(HW_VER_REV(0, 4), {
-		initSPIBus(SPI::Bus::SPI1, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM42670P, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
-		}, {GPIO::PortI, GPIO::Pin11}),
-		initSPIBus(SPI::Bus::SPI2, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
-		}, {GPIO::PortF, GPIO::Pin4}),
-		initSPIBus(SPI::Bus::SPI3, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM20649, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin7}),
-		}, {GPIO::PortE, GPIO::Pin7}),
-		//  initSPIBus(SPI::Bus::SPI4, {
-		//    // no devices
-		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
-		//  }, {GPIO::PortG, GPIO::Pin8}),
-		initSPIBus(SPI::Bus::SPI5, {
-			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
-		}),
-		initSPIBusExternal(SPI::Bus::SPI6, {
-			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
-			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
-		}),
-	}),
 };

 static constexpr bool unused = validateSPIConfig(px4_spi_buses_all_hw);
@@ -77,9 +77,6 @@ set(msg_files
 	estimator_states.msg
 	estimator_status.msg
 	estimator_status_flags.msg
-	estimator_aid_source_1d.msg
-	estimator_aid_source_2d.msg
-	estimator_aid_source_3d.msg
 	event.msg
 	follow_target.msg
 	failure_detector_status.msg
@@ -104,7 +101,6 @@ set(msg_files
 	landing_gear.msg
 	landing_target_innovations.msg
 	landing_target_pose.msg
-	lighting_states.msg
 	led_control.msg
 	log_message.msg
 	logger_status.msg
@@ -141,6 +137,7 @@ set(msg_files
 	rc_parameter_map.msg
 	rpm.msg
 	rtl_time_estimate.msg
+	safety.msg
 	satellite_info.msg
 	sensor_accel.msg
 	sensor_accel_fifo.msg
@@ -1,5 +1,5 @@
 uint64 timestamp			# time since system start (microseconds)
-uint8 NUM_ACTUATOR_CONTROLS = 16
+uint8 NUM_ACTUATOR_CONTROLS = 8
 uint8 NUM_ACTUATOR_CONTROL_GROUPS = 4
 uint8 INDEX_ROLL = 0
 uint8 INDEX_PITCH = 1
@@ -20,7 +20,7 @@ uint8 GROUP_INDEX_MANUAL_PASSTHROUGH = 3
 uint8 GROUP_INDEX_PAYLOAD = 6

 uint64 timestamp_sample	    # the timestamp the data this control response is based on was sampled
-float32[16] control
+float32[9] control

 # TOPICS actuator_controls actuator_controls_0 actuator_controls_1 actuator_controls_2 actuator_controls_3
 # TOPICS actuator_controls_virtual_fw actuator_controls_virtual_mc
@@ -76,3 +76,26 @@ float32 design_capacity             # The design capacity of the battery
 uint16 average_time_to_full         # The predicted remaining time until the battery reaches full charge, in minutes
 uint16 over_discharge_count         # Number of battery overdischarge
 float32 nominal_voltage             # Nominal voltage of the battery pack
+
+uint32 status_flags                       # Battery status flags
+
+# Battery status flags (combined faults and modes)
+
+uint32 STATUS_FLAG_READY = 1                      # The battery is ready to use (fly).
+uint32 STATUS_FLAG_CHARGING = 2                   # Battery is charging.
+uint32 STATUS_FLAG_CELL_BALANCING = 4             # Battery is cell balancing (during charging).
+uint32 STATUS_FLAG_FAULT_CELL_IMBALANCE = 8       # Battery cells are not balanced.
+uint32 STATUS_FLAG_AUTO_DISCHARGING = 16          # Battery is auto discharging (towards storage level).
+uint32 STATUS_FLAG_REQUIRES_SERVICE = 32          # Battery requires service (not safe to fly).
+uint32 STATUS_FLAG_BAD_BATTERY = 64               # Battery is faulty and cannot be repaired (not safe to fly).
+uint32 STATUS_FLAG_PROTECTIONS_ENABLED = 128      # Automatic battery protection monitoring is enabled.
+uint32 STATUS_FLAG_FAULT_PROTECTION_SYSTEM = 256  # The battery fault protection system had detected a fault and cut all power from the battery.
+uint32 STATUS_FLAG_FAULT_OVER_VOLT = 512          # One or more cells are above their maximum voltage rating.
+uint32 STATUS_FLAG_FAULT_UNDER_VOLT = 1024        # One or more cells are below their minimum voltage rating.
+uint32 STATUS_FLAG_FAULT_OVER_TEMPERATURE = 2048  # Over-temperature fault.
+uint32 STATUS_FLAG_FAULT_UNDER_TEMPERATURE = 4096 # Under-temperature fault.
+uint32 STATUS_FLAG_FAULT_OVER_CURRENT = 8192      # Over-current fault.
+uint32 STATUS_FLAG_FAULT_SHORT_CIRCUIT = 16384    # Short circuit event detected.
+uint32 STATUS_FLAG_FAULT_INCOMPATIBLE_VOLTAGE = 32768    # Voltage not compatible with power rail voltage.
+uint32 STATUS_FLAG_FAULT_INCOMPATIBLE_FIRMWARE = 65536   # Battery firmware is not compatible with current autopilot firmware.
+uint32 STATUS_FLAG_FAULT_INCOMPATIBLE_CELLS_CONFIGURATION = 131072  # Battery is not compatible due to cell configuration (e.g. 5s1p when vehicle requires 6s).
@@ -1,22 +0,0 @@
-uint64 timestamp             # time since system start (microseconds)
-uint64 timestamp_sample      # the timestamp of the raw data (microseconds)
-
-uint8 estimator_instance
-
-uint32 device_id
-
-uint64 time_last_fuse
-
-float32 observation
-float32 observation_variance
-
-float32 innovation
-float32 innovation_variance
-float32 test_ratio
-
-bool fusion_enabled          # true when measurements are being fused
-bool innovation_rejected     # true if the observation has been rejected
-bool fused                   # true if the sample was successfully fused
-
-# TOPICS estimator_aid_source_1d
-# TOPICS estimator_aid_src_baro_hgt estimator_aid_src_rng_hgt
@@ -1,22 +0,0 @@
-uint64 timestamp             # time since system start (microseconds)
-uint64 timestamp_sample      # the timestamp of the raw data (microseconds)
-
-uint8 estimator_instance
-
-uint32 device_id
-
-uint64[2] time_last_fuse
-
-float32[2] observation
-float32[2] observation_variance
-
-float32[2] innovation
-float32[2] innovation_variance
-float32[2] test_ratio
-
-bool[2] fusion_enabled       # true when measurements are being fused
-bool[2] innovation_rejected  # true if the observation has been rejected
-bool[2] fused                # true if the sample was successfully fused
-
-# TOPICS estimator_aid_source_2d
-# TOPICS estimator_aid_src_fake_pos
@@ -1,22 +0,0 @@
-uint64 timestamp             # time since system start (microseconds)
-uint64 timestamp_sample      # the timestamp of the raw data (microseconds)
-
-uint8 estimator_instance
-
-uint32 device_id
-
-uint64[3] time_last_fuse
-
-float32[3] observation
-float32[3] observation_variance
-
-float32[3] innovation
-float32[3] innovation_variance
-float32[3] test_ratio
-
-bool[3] fusion_enabled       # true when measurements are being fused
-bool[3] innovation_rejected  # true if the observation has been rejected
-bool[3] fused                # true if the sample was successfully fused
-
-# TOPICS estimator_aid_source_3d
-# TOPICS estimator_aid_src_gnss_pos estimator_aid_src_gnss_vel
@@ -16,10 +16,6 @@ bool starting_vision_pos_fusion         #  9 - true when the filter starts using
 bool starting_vision_vel_fusion         # 10 - true when the filter starts using vision system velocity measurements to correct the state estimates
 bool starting_vision_yaw_fusion         # 11 - true when the filter starts using vision system yaw  measurements to correct the state estimates
 bool yaw_aligned_to_imu_gps             # 12 - true when the filter resets the yaw to an estimate derived from IMU and GPS data
-bool reset_hgt_to_baro                  # 13 - true when the vertical position state is reset to the baro measurement
-bool reset_hgt_to_gps                   # 14 - true when the vertical position state is reset to the gps measurement
-bool reset_hgt_to_rng                   # 15 - true when the vertical position state is reset to the rng measurement
-bool reset_hgt_to_ev                    # 16 - true when the vertical position state is reset to the ev measurement

 # warning events
 uint32 warning_event_changes            # number of warning event changes
@@ -13,7 +13,6 @@ uint8 COLOR_PURPLE = 5
 uint8 COLOR_AMBER = 6
 uint8 COLOR_CYAN = 7
 uint8 COLOR_WHITE = 8
-uint8 COLOR_DIM_RED = 9

 # LED modes definitions
 uint8 MODE_OFF = 0 # turn LED off
@@ -28,11 +27,11 @@ uint8 MODE_FLASH = 7 # two fast blinks (on/off) with timing as in MODE_BLINK_FAS
 uint8 MAX_PRIORITY = 2 # maxium priority (minimum is 0)


-uint16 led_mask # bitmask which LED(s) to control, set to 0xff for all
+uint8 led_mask # bitmask which LED(s) to control, set to 0xff for all
 uint8 color # see COLOR_*
 uint8 mode # see MODE_*
 uint8 num_blinks # how many times to blink (number of on-off cycles if mode is one of MODE_BLINK_*) . Set to 0 for infinite
                 # in MODE_FLASH it is the number of cycles. Max number of blinks: 122 and max number of flash cycles: 20
 uint8 priority # priority: higher priority events will override current lower priority events (see MAX_PRIORITY)

-uint8 ORB_QUEUE_LENGTH = 16      # needs to match BOARD_MAX_LEDS
+uint8 ORB_QUEUE_LENGTH = 8      # needs to match BOARD_MAX_LEDS
@@ -1,37 +0,0 @@
-# LED control: control a single or multiple LED's.
-# These are the externally visible LED's, not the board LED's
-
-uint64 timestamp		# time since system start (microseconds)
-
-# colors
-uint8 COLOR_OFF = 0 # this is only used in the drivers
-uint8 COLOR_RED = 1
-uint8 COLOR_GREEN = 2
-uint8 COLOR_BLUE = 3
-uint8 COLOR_YELLOW = 4
-uint8 COLOR_PURPLE = 5
-uint8 COLOR_AMBER = 6
-uint8 COLOR_CYAN = 7
-uint8 COLOR_WHITE = 8
-
-# LED modes definitions
-uint8 MODE_OFF = 0 # turn LED off
-uint8 MODE_ON = 1  # turn LED on
-uint8 MODE_DISABLED = 2  # disable this priority (switch to lower priority setting)
-uint8 MODE_BLINK_SLOW = 3
-uint8 MODE_BLINK_NORMAL = 4
-uint8 MODE_BLINK_FAST = 5
-uint8 MODE_BREATHE = 6 # continuously increase & decrease brightness (solid color if driver does not support it)
-uint8 MODE_FLASH = 7 # two fast blinks (on/off) with timing as in MODE_BLINK_FAST and then off for a while
-
-uint8 MAX_PRIORITY = 2 # maxium priority (minimum is 0)
-
-
-uint8 led_mask # bitmask which LED(s) to control, set to 0xff for all
-uint8 color # see COLOR_*
-uint8 mode # see MODE_*
-uint8 num_blinks # how many times to blink (number of on-off cycles if mode is one of MODE_BLINK_*) . Set to 0 for infinite
-                 # in MODE_FLASH it is the number of cycles. Max number of blinks: 122 and max number of flash cycles: 20
-uint8 priority # priority: higher priority events will override current lower priority events (see MAX_PRIORITY)
-
-uint8 ORB_QUEUE_LENGTH = 8      # needs to match BOARD_MAX_LEDS
@@ -1,17 +0,0 @@
-# LED States for El Mandadero and NXP Buggy3
-
-uint64 timestamp
-
-uint8 IDLE     = 0 # Dim Red
-uint8 BRAKE    = 1 # Bright Red
-uint8 REVERSE  = 2 # [Top] White
-uint8 TURN     = 3 # [Top] Flashing Yellow
-uint8 HAZARD   = 4 # Flashing Yellow
-uint8 NO_STATE = 255 # No state update
-
-# LED Panel IDs
-# 0 - Right Front
-# 1 - Left Front
-# 2 - Left Rear
-# 3 - Right Rear
-uint8[10] state
@@ -19,7 +19,7 @@ bool status_rc_ppm
 bool status_rc_sbus
 bool status_rc_st24
 bool status_rc_sumd
-bool status_safety_button_event # px4io safety button was pressed for longer than 1 second
+bool status_safety_off

 # PX4IO alarms (PX4IO_P_STATUS_ALARMS)
 bool alarm_pwm_error
@@ -0,0 +1,3 @@
+uint64 timestamp		# time since system start (microseconds)
+bool safety_switch_available		# Set to true if a safety switch is connected
+bool safety_off			# Set to true if safety is off
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Hamish Willee	d08aaa7013	Add BATTERY_CELL_VOLTAGES streaming	2022-06-02 16:18:43 +10:00
Hamish Willee	5decb82b94	Update to RFC with capacity_ fields	2022-06-02 14:33:01 +10:00
Hamish Willee	1d189100b5	Update mavlink dev branch to latest	2022-06-02 14:20:42 +10:00
Hamish Willee	26d9b1d46a	Update submodule to include cell_voltages	2022-06-01 16:38:57 +10:00
Hamish Willee	e7fa130b06	Add BATTERY_STATUS_V2 streaming	2022-05-22 22:21:04 +10:00
Hamish Willee	5ca0862bbb	mavlink submodule points to battery_status_v2_rfcbranch dev branch	2022-05-19 20:29:39 +10:00