fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-07-04 01:00:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
32,727 Commits 852 Branches 161 Tags
f3d923f226b15bd044df32a48195fbb2943ff1d3
Commit Graph

21260 Commits

Author SHA1 Message Date
Daniel Agar f3d923f226 sensors: VehicleIMU improve scheduling 
- schedule on interval multiple of sensor_gyro publications without increasing the configured integration rate
 - IMU_INTEG_RATE add enums to guide appropriate selection
 - add average calculation bounds to prevent incorrect calculation and force monitoring again if there are consecutive gaps in data
 2020-07-09 10:29:04 -04:00
Daniel Agar fa8ba09f50 drivers/imu/bosch/bmi055: remove interrupt latch 
- the latch would actually cause more problems if the backup schedule hit
 - this reduces the number of cycles where the FIFO is actually empty at max rate (when there's only 1 sample in the FIFO expected)
 2020-07-09 10:15:33 -04:00
Daniel Agar 194029d010 drivers/imu: Invensense & Bosch remove transfer perf counters 
- we already have nearly equivalent data in every sensor publication with the (publication) timestamp and timestamp_sample
 2020-07-09 10:12:37 -04:00
Daniel Agar 6bc1af7680 sensors/vehicle_air_data: only publish primary if error free 
- cleanup failover related messaging
 - store previous failover count to prevent unecessary checks
 - check for parameter update initially to minimize work after fetching
fresh sensor data
 2020-07-09 10:11:23 -04:00
Daniel Agar 6d52772d30 sensors/vehicle_air_data: move to sensors namespace 
- move params to end of class
 2020-07-09 10:11:23 -04:00
Beat Küng 405cb5038d sdp3x: introduce State enum 
to avoid blocking the work queue during configuring.
 2020-07-08 11:43:21 -04:00
Beat Küng fc1be6e0b1 sdp3x: add '-k' option to keep retrying even if probing fails 
we have a setup where the sensor is connected via magnets, so the system
could boot without sensor initially attached.
 2020-07-08 11:43:21 -04:00
Beat Küng 3cc394e6c7 sdp3x: improve robustness, try to reconfigure on transfer error 2020-07-08 11:43:21 -04:00
Daniel Agar 96a6b5c914 load_mon: decrease warning threshold for stack check builds 
- enabling stack check increases stack usage and will assert if there's
any overflow
 2020-07-06 11:13:15 -04:00
Beat Küng 2bcc2f4ccc mag params: add missing mag rotations according to rotation.h 2020-07-06 10:16:17 -04:00
Beat Küng 795b9e938e drivers: add ST LPS33HW baro driver 
Note: only tested on I2C
 2020-07-06 10:13:11 -04:00
Matthias Grob 03735f12a2 FlightTask: correct activate() doxygen comment 2020-07-04 12:29:10 +02:00
Thomas Stauber 3702c8b481 [VTOL] impose minimum transition duration 
* VT_F_TR_OL_TM would silently reduce VT_TRANS_MIN_TM when VT_F_TR_OL_TM was smaller
 2020-07-03 13:19:02 -04:00
Daniel Agar d3157f4266 sensors/vehicle_acceleration: apply calibration before filtering 2020-07-02 12:35:17 -04:00
Claudio Micheli 743898d574 Commander: failure detector, automatically disarm on a ESC failure 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2020-07-01 08:55:54 +02:00
Claudio Micheli a7f2f2908b Commander: make optional tilt-check after takeoff (failure detector). 
- Introduced COM_LKDOWN_TKO parameter
    - Introduced auto disarm for lockdown state
    - Do not trigger flight termiantion if system is in lockdown

Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2020-07-01 08:55:54 +02:00
Claudio Micheli 6358dd400a failure detector: added esc failures detection 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2020-07-01 08:55:54 +02:00
PX4 BuildBot 19d2de0726 Update submodule matrix to latest Tue Jun 30 14:40:13 UTC 2020 
- matrix in PX4/Firmware (a1043f6ce068cc4d039d6808ef98fd8c3f379582): https://github.com/PX4/Matrix/commit/f529358e9ac28b0809572c14a964ba7ba691adc4
    - matrix current upstream: https://github.com/PX4/Matrix/commit/9a30828a0a1d79e87fd09653bb9f936d7ca0ba17
    - Changes: https://github.com/PX4/Matrix/compare/f529358e9ac28b0809572c14a964ba7ba691adc4...9a30828a0a1d79e87fd09653bb9f936d7ca0ba17

    9a30828 2020-06-30 Julian Kent - Add explicit matrix + scalar test
f3cf615 2020-06-30 Julian Kent - Do += -= and scalar *= /= in place
 2020-06-30 11:11:45 -04:00
PX4 BuildBot 38588f0c37 Update submodule ecl to latest Tue Jun 30 00:38:47 UTC 2020 
- ecl in PX4/Firmware (bd4d3f2b9929271b2616d2e1d6952059a7e8bc72): https://github.com/PX4/ecl/commit/e4b44f704bb641fa93bedc81734c5249fcd9ed42
    - ecl current upstream: https://github.com/PX4/ecl/commit/5356077a3244a9a29adfae4aeaaab900cd28e9e8
    - Changes: https://github.com/PX4/ecl/compare/e4b44f704bb641fa93bedc81734c5249fcd9ed42...5356077a3244a9a29adfae4aeaaab900cd28e9e8

    5356077 2020-06-21 kamilritz - Make flow_innov/-var a matrix Vector2f
c2801eb 2020-06-21 kamilritz - Add const modifier and increase matrix library usage
d9afc2f 2020-06-21 kamilritz - Remove repeated division by same value
d16b43a 2020-06-21 kamilritz - Get rid of non functional piece of code
c3653e6 2020-06-21 kamilritz - Add const modifier
48f0eb1 2020-06-21 kamilritz - Remove uninformative comments
4a69b41 2020-06-21 kamilritz - Increase matrix library usage even more
630be60 2020-06-21 kamilritz - Increase matrix library usage
22274b1 2020-06-21 kamilritz - Add const modifier
61c139e 2020-06-21 kamilritz - Remove unused variable
afd4f3f 2020-06-21 kamilritz - Fix typo
a3706fd 2020-06-21 kamilritz - Make relative wind computation more compact
b8f9376 2020-06-21 kamilritz - Make mag_innov/-var a Matrix::Vector3f
0ea7cd8 2020-06-25 Kamil Ritz - Attempt to fix CI firmware build test
2927132 2020-06-25 Daniel Agar - clang-format set BreakBeforeBraces to Linux style
b96c62e 2020-06-25 sevenbill - Optionalized build dependency on git
794e6ec 2020-06-25 Bill Morris - Enforce tabs via editorcofig
 2020-06-29 21:50:55 -04:00
dominiknatter d8831c5133 ekf2: Ignore optical flow samples with too large integration time spans. Fixes #14165 
Within ekf2, optical flow messages (amongst others) are fused to the state estimates. It might occur that optical flow sensors report unreliable and unrealistic spikes. In that case, the state estimator went crazy so far and just ignored optical flow values from that moment on.

The common thread for all these spikes seems to be a too high integration time span. Therefore, this fix adds a simple logic that ignores unrealistically high integration time spans. As a threshold, 1 second was chosen.

Reported-by: Dominik Natter <dominik.natter@gmail.com>
 2020-06-29 12:00:29 -04:00
Beat Küng 0c4fd2bfa0 param: also show unused params for 'param show -c' 
I find this generally useful for debugging.
 2020-06-29 09:49:56 -04:00
Beat Küng d22bbde7c5 logger: fix hardfault for invalid SDLOG_PROFILE setting 
If some bits are set but no topic was added, _subscriptions was null but
later accessed.

During normal use this only happens when switching between different
firmware versions with different SDLOG_PROFILE definition (with custom
config).
 2020-06-29 09:49:56 -04:00
PX4 BuildBot b463a2f0d5 Update submodule matrix to latest Sun Jun 28 12:38:27 UTC 2020 
- matrix in PX4/Firmware (2337b7e2f7b4eecddbb9103ab7672fac2c741fc5): https://github.com/PX4/Matrix/commit/674bd99f3b9284e1088d100d765b3a09cf0c192f
    - matrix current upstream: https://github.com/PX4/Matrix/commit/f529358e9ac28b0809572c14a964ba7ba691adc4
    - Changes: https://github.com/PX4/Matrix/compare/674bd99f3b9284e1088d100d765b3a09cf0c192f...f529358e9ac28b0809572c14a964ba7ba691adc4

    f529358 2020-06-27 kamilritz - Add missing const modifier
 2020-06-28 19:55:06 -04:00
bresch 1761ef3952 FlightTaskAuto: Update prev and next waypoint depending on validity 
This fixes the corner case where a NAV_DELAY command changes the
validity of the next WP but not the rest of the triplet. The logic in
FlightTask was ignoring this change because the check was only based on
WP position change.
 2020-06-26 09:48:22 -04:00
RomanBapst 120f188ada rtl: do not use cone logic for vehicle flying as fixed wing 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2020-06-25 09:17:23 -04:00
Daniel Agar 55808ed2f9 simulator: break out standalone battery simulator module 
- this is a small step towards unifying SITL & HITL
 2020-06-24 10:39:21 -04:00
PX4 BuildBot 6dd0932158 Update submodule ecl to latest Wed Jun 24 00:39:40 UTC 2020 
- ecl in PX4/Firmware (fff83fdee69789ec9da259b564bbfe67585a4b5f): https://github.com/PX4/ecl/commit/a8bb8ea99fc92389a5cdd44cd7108416e0c49fb6
    - ecl current upstream: https://github.com/PX4/ecl/commit/e4b44f704bb641fa93bedc81734c5249fcd9ed42
    - Changes: https://github.com/PX4/ecl/compare/a8bb8ea99fc92389a5cdd44cd7108416e0c49fb6...e4b44f704bb641fa93bedc81734c5249fcd9ed42

    e4b44f7 2020-06-23 PX4 BuildBot - Update geo_lookup WMM  to latest Tue Jun 23 14:15:04 UTC 2020
4b746a3 2020-06-23 bresch - GPS Yaw: add consts and remove fusion starting message
2bafe9d 2020-06-22 bresch - GPS Yaw: wait to fuse at yaw at least once before declaring it faulty
51cd63d 2020-06-22 bresch - GPS Yaw: fall back to other yaw aiding source in case of bad data
fe2a9d3 2020-06-22 bresch - GPS Yaw: move isfinite checks in control.cpp
3c6790f 2020-06-22 bresch - GPS Yaw: Always reset Yaw when GPS Yaw fusion is starting
ff8b5ec 2020-06-21 kamilritz - Extract general functions into utils
fda30d8 2020-06-15 Daniel Agar - geo_lookup: expand latitude to +-80 degrees
109eca5 2020-06-15 Daniel Agar - geo_lookup: create simple python script to update tables
41b9e4f 2020-06-15 Daniel Agar - geo_lookup: move tables to separate file
 2020-06-24 08:29:20 +02:00
Beat Küng fe9a971f0e logger: use subscription interval also in polling mode 
Now that replay uses lockstep scheduling we don't need that work-around
anymore.
 2020-06-23 11:53:55 -04:00
Beat Küng a3d1c94aa4 logger: reduce poll timeout to 20ms 
Just to ensure even if the topic is not updated, logger will still update
regularly.
 2020-06-23 11:53:55 -04:00
Beat Küng 157ef43e28 replay: use lockstep scheduler 2020-06-23 11:53:55 -04:00
Beat Küng 71dcf8d619 sitl: use lockstep components API 
- avoids the need for ekf2_timestamp publications by q and lpe
- adds logger to the lockstep cycle and makes it poll on ekf2_timestamps
  or vehicle_attitude. This avoids dropped samples (required for replay).
 2020-06-23 11:53:55 -04:00
Beat Küng 5378d1468f lockstep_scheduler: add generic lockstep component API 
allows components to register and ensure the lockstep cycle waits for
all components to be updated.
 2020-06-23 11:53:55 -04:00
Beat Küng 55d06241b3 fix unit tests: do not stub pthread_cond_wait 
and fix the tests instead.
Some unit tests depend on pthread_cond_wait to work as expected.
 2020-06-23 11:53:55 -04:00
Daniel Agar 32887193d6 systemcmds/tests: remove autodeclination test (moving to PX4/ecl) 2020-06-23 10:34:25 -04:00
Beat Küng bb36b4a63f {dshot,pwm_out}: allow mode_pwm4 for boards with 5 outputs 
Required on durandal if camera triggering is enabled.
 2020-06-23 09:32:13 -04:00
Matthias Grob e9eae1bd76 Refactor: Name manual_control_setpoint the same way everywhere 2020-06-22 12:06:27 -04:00
Daniel Agar c6dd8bfcd6 imu/invensense/icm20649: minor cleanup to keep in sync with icm20948 2020-06-22 10:11:22 -04:00
Daniel Agar 4bcee8e13f magnetometers/akm: new standalone AKM AK8963 & AK09916 drivers 2020-06-22 10:11:22 -04:00
Daniel Agar 8c34f47b3d imu/invensense/mpu9250: sync with other recent invensense improvements 
- clenaup ak8963 with simplifed setup and health check
 2020-06-22 10:11:22 -04:00
Daniel Agar 22daa26955 msgs/sensor_mag: remove unused raw, add timestamp_asmple, shrink error count 
- move mpu9250 sensitivity handling back to driver (this isn't common)
 2020-06-22 10:11:22 -04:00
Daniel Agar d9102ce54c imu/invensense/icm20948: sync with other recent invensense improvements 
- clenaup ak09916 with simplifed setup and health check
 2020-06-22 10:11:22 -04:00
Daniel Agar e50f92805b mavlink: mission minor whitespace fixes and initialization 
- it's safer to zero any struct being send over mavlink to prevent
extension field surpries later
 2020-06-21 11:26:02 -04:00
Daniel Agar 80c1f4e5e6 mavlink: send MISSION_CURRENT respect signed sequence number 
- current_seq -1 indicates nothing currently active
 2020-06-21 11:26:02 -04:00
TSC21 b3bbc351ca mavlink: DISTANCE_SENSOR: propagate signal_quality metric 2020-06-20 22:25:37 +01:00
Daniel Agar b1e360e332 simulator: only use temperature if baro updated 2020-06-18 21:34:58 -04:00
Daniel Agar 3f19335f08 drivers/imu/invensense: FIFO_MAX_SAMPLES include sensor_accel_fifo in sample size limit 2020-06-18 20:49:15 -04:00
Daniel Agar 56c86e77bd replace FIFOSample -> sensor_accel_fifo/sensor_gyro_fifo 2020-06-18 20:49:15 -04:00
Daniel Agar 87250ca47f move ecl L1, TECS, and data validator to PX4/Firmware 2020-06-18 19:26:30 -04:00
JacobCrabill 78650bdbab UAVCAN: Fix STM32H7 message RAM for FDCAN2 2020-06-18 18:55:21 -04:00
JacobCrabill 62799d9aca UAVCAN: Add STM32H7 FDCAN Driver 
Took the existing uavcan_stm32 driver and replaced all bxCAN code with
the equivalent for FDCAN following ST Reference Manual RM0433.

Note: There is still a bug somewhere in regards to FDCAN2 (probably
incorrect setup of the message RAM? Not sure.)  But (FD)CAN1 is fully
functional (Classic CAN only, no CAN-FD).

Also TODO: Configure CAN filters.  Right now there are no filters; all
incoming messages are accepted.
 2020-06-18 18:55:21 -04:00