fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-07-03 11:20:35 +08:00
Code Issues Packages Projects Releases Wiki Activity
34,856 Commits 852 Branches 161 Tags
ecfbd79a90f0ed00a6fc691d875f7beb7ec8fd5f
Commit Graph

135 Commits

Author SHA1 Message Date
Daniel Agar f8eaa6e46b ROMFS handle bl_update generically 
- include all available legacy bootloaders
 2021-03-11 00:38:18 +01:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar a0b9b44ff6 boards: stm32h7 set CONFIG_SDMMC1 consistently 2021-03-09 09:37:05 -05:00
Ryan Johnston 9d0a8928bd Update chip type 
Update chip type from NI to II.
 2021-03-05 21:28:36 +01:00
Ryan Johnston 0958b30804 Fix i2c4 bus 
Fix i2c4 bus (and subsequent CI errors)
 2021-03-05 21:28:11 +01:00
Ryan Johnston 2bf508061a Update i2c bus 
Change internal bus 2 to external.
 2021-03-05 21:28:11 +01:00
Ryan Johnston 17b48102f4 Update i2c mapping and i2c clock source 
i2c4 was mapped incorrectly and i2c4 clock source wasn't present.
 2021-03-05 21:28:11 +01:00
Ryan Johnston daf744c678 MRO Control Zero F7 OEM Fixes (#16977) 
* Update i2c 4 pinmap on F7 OEM

Update i2c 4 pinmap

* Fix i2c Internal to External on F7 OEM

Fix i2c Internal to External on F7 OEM

* Add Can2 Silent Pin

Add Can2 Silent Pin
 2021-03-05 21:26:15 +01:00
Daniel Agar 19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Ryan Johnston bc8d9af23e Add Lazy FPU 
Reported that LAZYFPU  interact with the MTD (FRAM) driver.

https://github.com/PX4/PX4-Autopilot/issues/16548
 2021-03-03 14:43:40 -05:00
Ryan Johnston 0047e518aa Add Lazy FPU to Defconfig 
Reported that LAZYFPU interacts with the MTD (FRAM) driver.
 2021-03-03 14:43:17 -05:00
Daniel Agar c9a2d0ed34 IMU_GYRO_RATEMAX set system default to 400 Hz 
- MC default is still 800 Hz
 2021-03-02 10:08:49 -05:00
Beat Küng 7e33d03470 drivers: remove tap_esc 
- it's not used anymore
- it would need a refactoring to use mixer_module
 2021-02-25 09:28:37 -05:00
Ryan Johnston cec31fd685 Remove mkblctrl from default.cmake 
Mkblctrl needs to be removed for the build to now succeed.
 2021-02-24 08:54:22 +01:00
Ryan Johnston 45dde177ee Remove mkblctrl from default.cmake 
Mkblctrl needs to be removed for the build to succeed.
 2021-02-24 08:53:35 +01:00
Ryan Johnston 410ca51a4a boards: MRO Control Zero F7 OEM minor update 
- Updating Serial port mapping to be the same across all Control Zero boards
 - CAN2 Silent Pin Update
 2021-02-21 21:08:38 -05:00
Ryan Johnston a1fa6a72ea boards: MRO Control Zero H7 Board Support 2021-02-21 21:07:36 -05:00
Ryan Johnston 5376178987 boards: MRO Control Zero H7 OEM Board Support 2021-02-21 21:06:27 -05:00
Daniel Agar 414f9f81d9 move fake GPS to standalone module 2021-02-20 14:13:36 -05:00
Daniel Agar ab0d0fd0be uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar e48a869160 boards: mRo pixracer pro disable USART6 (conflicts with SPI6) 2021-02-16 22:28:13 -05:00
Daniel Agar 2702306849 boards: mRo pixracer pro fix incorrect SPI2 sck 2021-02-16 22:28:13 -05:00
Daniel Agar fb2a199621 delete unmaintaned mkblctrl driver 2021-02-14 10:38:15 +01:00
Ryan Johnston 5a58f25d6a boards: MRO Control Zero F7 OEM Support 2021-02-13 11:16:55 -05:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar a2442ffb48 board: enable UAVCAN sensors by default on F7/H7 2021-02-02 09:01:12 +01:00
Daniel Agar 78dff6adcb boards: add CONSTRAINED_MEMORY build option 
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
 - limits number of EKF2 multi instances to 2.
 - enabled on all cortex m4 boards
 2021-02-01 08:56:22 +01:00
Daniel Agar 318c7e83b3 support up to PWM 14 
- generate PWM_MAIN 1-14
 - generate PWM_AUX 1-8
 - generate PWM_EXTRA 1-8
 - px4io and pwm_out directly read configuration parameters
    - only available and active physical outputs are actually shown for configuration
 - overall saves flash despite adding many new parameters
 2021-01-30 15:55:53 +01:00
Ryan Johnston d22eef9396 boards: mRo Control Zero F7 fix for voltage/current sensing 
* Rename GPIO_nVDD_BRICK1v to GPIO_VDD_BRICK1
 2021-01-19 15:48:17 -05:00
Ryan Johnston cea8ad4236 Control Zero F7 - RSSI Fix - SBUS Only/PPM Partial 
This fixes RSSI for the Control Zero F7 but I have noticed that while this works perfectly for SBUS receivers, for PPM receivers it does not decrease the RSSI visual value in QGC when removing the RC transmitter connection.

When a PPM receiver is connected and the connection is lost the autopilot goes into RC Scan Mode (in the RC Update Module) to determine what is connected (even though something already is connected).

The main issue with this is that PPM receivers don't go into RC Failsafe but I don't think it is an issue with this autopilot. It looks to be an issue with the RC Update Module and how it is handled at the module level for non I/O coprocessor autopilots. 


Tested with an X8R (SBUS) and a Dragonlink (PPM) as well as a Dragonlink set to SBUS as the output. SBUS worked as intended. See screenshots below.
 2021-01-19 20:42:28 +01:00
Daniel Agar 1ec10bfcc6 boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar 7f5fae91b0 boards: mro ctrl zero f7 fix default power module calibration 2021-01-12 16:51:05 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar 763c3b8fda boards: start enabling multi-EKF by default on F7/H7 2021-01-10 17:56:34 +01:00
Daniel Agar 404f74f996 boards: mro/pixracerpro add flight_mode_manager 2020-12-30 10:25:08 -05:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
Daniel Agar 48da0055a1 boards: add initial mRo Pixracer Pro (M10064C) support 2020-12-27 12:12:15 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane 434f63d479 mro_x21: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 7c07ce9649 mro_x21-777: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 5703070974 mro_ctrl-zero-f7: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Daniel Agar 1bf0218c87 boards: mRo Control Zero F7 fix RC input and cleanup sensors init 2020-10-04 22:23:47 -04:00
Tanja Baumann b5ebdb8e41 add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane 00b4807443 mro_x21: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 4f5c88fc89 mro_x21-777: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 1e55ce0839 mro_ctrl-zero-f7: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane aa1cb370e4 mro_x21 Updates for NuttX 9.1.0- 
mro_x21: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00