25186 Commits

Author SHA1 Message Date
Roman
ddb2dd89db simulator mavlink: support for quad tiltrotor mav type
Signed-off-by: Roman <bapstroman@gmail.com>
2018-02-22 15:10:22 -05:00
Roman
e9c715f89b pwm_out_sim: various fixes for tiltrotor simulation
- increased the number of pwm outputs
- handle PWM_SERVO_SET_MIN_PWM and PWM_SERVO_SET_MAX_PWM

Signed-off-by: Roman <bapstroman@gmail.com>
2018-02-22 15:10:22 -05:00
Roman
2886fe8da3 posix-configs: added sitl startup script for gazebo quad tiltrotor model
Signed-off-by: Roman <bapstroman@gmail.com>
2018-02-22 15:10:22 -05:00
Roman
86c472d8ff ROMFS sitl: added a mixer for the gazebo quad tiltrotor model
Signed-off-by: Roman <bapstroman@gmail.com>
2018-02-22 15:10:22 -05:00
mcsauder
3ef6bc7d93 Update CMakeLists for the drivers/imu directory. 2018-02-22 12:48:34 -05:00
Julian Oes
4cac6d1a44 tune_control: added define for tune strength
This adds a define for the tune strength instead of hard-coding it with
a magic number.
2018-02-22 15:24:46 +01:00
Paul Riseborough
abb067c788
ecl: Use EKF version with external vision nav axis rotation bug fixes (#8935) 2018-02-22 22:02:50 +11:00
Daniel Agar
19e706fede fw_att_control fix attitude setpoint publication 2018-02-21 21:07:29 -05:00
Daniel Agar
a0f115b9ae fw_att_control consolidate flaps code 2018-02-21 21:07:29 -05:00
Daniel Agar
4cb71f209f fw_att_control centralize manual setpoint generation 2018-02-21 21:07:29 -05:00
Daniel Agar
7fa858ad84 fw_att_control only store battery_status scale 2018-02-21 21:07:29 -05:00
Daniel Agar
94b8e4a2bf fw_att_control remove commented warnings 2018-02-21 21:07:29 -05:00
Daniel Agar
dcc47020a4 fw_att_control update params before poll 2018-02-21 21:07:29 -05:00
Daniel Agar
bf42964432 fw_att_control don't store entire vehicle_land_detected message 2018-02-21 21:07:29 -05:00
Daniel Agar
97815df1a8 uorb_graph update fw_att_control special case 2018-02-21 21:07:29 -05:00
Daniel Agar
063714c42c fw_att_control initialize all fields in header 2018-02-21 21:07:29 -05:00
Daniel Agar
15fb60c48f fw_att_control delete unused loop_counter 2018-02-21 21:07:29 -05:00
Daniel Agar
1897b93cd2 fw_att_control rename fw_att_control_main.cpp to match class 2018-02-21 21:07:29 -05:00
Daniel Agar
426f2cce2e fw_att_control split header into separate file 2018-02-21 21:07:29 -05:00
Daniel Agar
80de3f48c8 fw_att_control remove debug code 2018-02-21 21:07:29 -05:00
Daniel Agar
559e2c211a fw_att_control move to ModuleBase 2018-02-21 21:07:29 -05:00
Daniel Agar
a35abf2453
rename nuttx board support packages for consistecy (#8777) 2018-02-19 19:12:32 -05:00
Beat Küng
7b5b1c4f23 mc_att_control: update & reset d-term lowpass filter only when frequency changes 2018-02-19 17:02:31 +01:00
Beat Küng
5b7c062f67 mc_att_control_main: remove unused _rates_sp_prev 2018-02-19 17:02:31 +01:00
Beat Küng
f346b00ee0 mc_att_control rate controller: use a butterworth lowpass filter on the D-term
The filter is disabled by default, thus the behavior is unchanged.
2018-02-19 17:02:31 +01:00
Beat Küng
ca9c3b18ff mc_attitude_control: avoid using a static variable for last_run
and call hrt_absolute_time() only once.
2018-02-19 17:02:31 +01:00
Beat Küng
54d1395206 IMU_GYRO_CUTOFF, IMU_ACCEL_CUTOFF: reduce minimum to 0, allowing to disable filtering 2018-02-19 17:02:31 +01:00
Beat Küng
4bf1980ff6 MC_ROLL_P, MC_PITCH_P: increase maximum value to 12
- use the same value for both
- lower control latency allows increasing these gains
2018-02-19 17:02:31 +01:00
Beat Küng
8d9e9d3a7b RC input: allow disabling the RC filtering via RC_FLT_CUTOFF
The default value of 10 Hz adds noticeable lag.
2018-02-19 09:29:46 -05:00
Daniel Agar
8fc659dcb2 commander only copy actuator_controls if engine failure enabled 2018-02-19 15:28:47 +01:00
Daniel Agar
43c7f7edbe commander remove vehicle_attitude usage 2018-02-19 15:28:47 +01:00
Daniel Agar
71fef78bdd commander remove unused include 2018-02-19 15:28:47 +01:00
Daniel Agar
50e96b24b0 commander remove unused differential pressure check 2018-02-19 15:28:47 +01:00
Daniel Agar
ecf46b4f91 commander remove globallocalconverter 2018-02-19 15:28:47 +01:00
Daniel Agar
2c7d45064e mavlink EXTENDED_SYS_STATE initialize landed and vtol state 2018-02-19 15:28:47 +01:00
Daniel Agar
4e45d7959c commander remove gps receiver checks 2018-02-19 15:28:47 +01:00
Julian Oes
a6e863ac89 sitl_gazebo: updated submodule (#8917)
* This includes the new basic camera control.
2018-02-19 09:28:34 -05:00
Lorenz Meier
a24a40c6c4
Update CONTRIBUTING.md
Updated link to flight review
2018-02-19 12:23:56 +01:00
Vasily Evseenko
135162522a Don't use ADSB messages with undefined fields in navigator (#8900)
Don't use ADSB messages with undefined fields in navigator
2018-02-18 11:08:40 +01:00
Daniel Agar
a1f660119c fw_pos_control_l1 consolidate message updates 2018-02-17 18:11:43 +01:00
Daniel Agar
458d8f7b02 fw_pos_control_l1 move to ModuleBase 2018-02-17 18:11:43 +01:00
Daniel Agar
4aeb70fcfe rcS move logger startup to rc.logging and end of init
- fixes #8903
2018-02-17 18:09:50 +01:00
Martina
f932217fdc mavlink_receiver: decode obstacle_distance message 2018-02-16 19:59:31 +01:00
Martina
883fb8ce57 CMakeLists: add obstacle_distance message 2018-02-16 19:59:31 +01:00
Martina
f5bfabfab9 add obstacle_distance message 2018-02-16 19:59:31 +01:00
Beat Küng
37a082255a rc.interface: enable aux mixer for FMU-v5 2018-02-16 07:58:40 +01:00
Vicente Monge
a272cbbd08 Included field timestamp for micrortps bridge messages. 2018-02-15 22:32:18 +01:00
ChristophTobler
f9cb575ced mavlink_receiver: add evh/evv to vision msg
this will be used by the ekf2 at some point
2018-02-15 11:26:01 -05:00
Avinash Reddy Palleti
12c343317c Add aerofc baudrate to list
Adding aerofc baudrate 921600 into the list
2018-02-15 10:23:59 +01:00
Daniel Agar
a04110cad1 Jenkins temporarily disable ROS vtol mission test old 3 2018-02-14 20:29:20 -05:00