* FWModeManager: add option to set flag for disabling actuators during launch
Signed-off-by: Silvan <silvan@auterion.com>
* Allocation: add option to each control surface to be locked for launch
Signed-off-by: Silvan <silvan@auterion.com>
* FW rate control: reset integral while control surfaces are locked
Signed-off-by: Silvan <silvan@auterion.com>
---------
Signed-off-by: Silvan <silvan@auterion.com>
Co-authored-by: mahima-yoga <mahima@auterion.com>
* Creating a base for grf lidar
* Serial Drive is working, need to work out distance publish
* WIP Getting Range Data in cm
* Working Rand Distance Values for GRF 250 and GRF500
* Review Changes
* Compiler fixes
* Update to date
* small update
* Fix typo and remover unused libs
* removing unused enum
* Update to the Documentation
* Fiving scaling issue
* update to the logic
* [Feature] Adding I2C driver for the GRF250 and GRF500 models (#26425)
* Adding the GRF I2C driver
* I2C Driver Working
* Removing a lot of unnecessary code
* fixing names
* Changing the i2c Driver to be in the lightware laser
* remove the old driver
* formatting fix
* Adding Ligthware GRF to documentation
* Update to the Documentation
* Ensuring sample_perf ends
* Updating Docs
* uavcannode: implement hardpoint commands (#26334)
* implement cannode hardpoint commands
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
* Update src/drivers/uavcannode/Subscribers/HardpointCommand.hpp
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* Update src/drivers/uavcannode/Subscribers/HardpointCommand.hpp
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* add hardpoint sub to ark cannode, simplify handling of hardpoint broadcast
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
---------
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* voxl_esc: Limit frequency of UART passthru writes to 20Hz
* voxl2_io: Added UART passthru
* docs: update link for px4 ros2 interface lib python api docs
* estimator_interface: remove unused getter
* gnss_checks: always run strict checks on ground
With the goal to never take off if the GNSS solution is not fullfilling the configured requirements still not stopping to use it in case it degrades mid air.
* ekf2 unit-tests: adapt to strict GNSS checks on ground
* escCheck: rework online check to properly report offline ESCs
previous to this
09d79b221f
set `esc_online_flags` e.g. for UAVCAN ESCs which specific one is online and that then got compared to a mask where the first `esc_count` bits were set.
So if only ESC 5 is mapped and online you get the message "ESC 156 offline" because `esc_online_flags = 0b1000` gets compared to `online_bitmask = 0b1` based on `esc_count = 1` and the motor index is `esc[0].actuator_function = 0` wrapped using `0 - actuator_motors_s::ACTUATOR_FUNCTION_MOTOR1 + 1 = 156`.
* FailureDetector: consistent timestamp naming
* FailureDetector: rework motor status check
* FailureDetector: implement upper and lower current limit with offset
* Update src/modules/commander/failure_detector/FailureDetector.cpp
Prevent Buffer overflow
* Update Format
* Subedit
* Shrink and rename image
* Apply suggestion from @hamishwillee
Sounds good
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Apply suggestion from @hamishwillee
More universal approach
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Update to the Documentation
* FailureDetector: rework motor status check
* FailureDetector: implement upper and lower current limit with offset
* Subedit
* docs: update parameter reference metadata
* Remove pregenerated files - that should all be tidied up next time this runs
* remover GRF parameters
* Documentation updates
* Fixing Merge Conflicts
* remove @
* Undo Changes to parameter_reference
* remove the code that will be autogen-ed
* Update the Camake File
---------
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Co-authored-by: Andrew Brahim <35986980+dirksavage88@users.noreply.github.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
Co-authored-by: Eric Katzfey <eric.katzfey@modalai.com>
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Co-authored-by: Matthias Grob <maetugr@gmail.com>
Co-authored-by: Marco Hauswirth <marco.hauswirth@auterion.com>
Co-authored-by: Nick <145654544+ttechnick@users.noreply.github.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
* feat: implement UAVCAN LED control for individual light control and assignment
* uavcan led: nit-picks from review
* uavcan led: reduce maximum number of lights
to avoid unused parameters
* uavcan led: simplify anticolision on check
* uavcan led: correctly map 8-bit RGB to rgb565
* Trim param name character arrays to 17
16 characters + \0 termination
* uavcan led: final nit-picks
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
- Update "Failed to import Python packages" section to reference
gz_x500 instead of jmavsim, and point to Tools/setup/requirements.txt
instead of listing individual packages
- Fix :::info admonition spacing in Ubuntu dev env docs
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
The new px4-dev container replaces the old per-distro container
hierarchy from PX4/PX4-containers. It is:
- Multi-architecture (linux/amd64 + linux/arm64)
- Based on Ubuntu 24.04
- Built from the in-tree Dockerfile via GitHub Actions
- Published to both ghcr.io and Docker Hub
- Tagged with PX4 versions (e.g. px4-dev:v1.16.0)
Mark the legacy per-distro containers (px4-dev-nuttx-jammy,
px4-dev-ros2-humble, etc.) as deprecated, note that px4-sim
is planned for simulation workflows.
Update all examples to use px4-dev instead of legacy containers.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
docker.md:
- Update container hierarchy from focal to jammy
- Replace ROS Noetic/Foxy references with ROS 2 Humble
- Update docker run example to use humble container
- Update SITL example from gazebo-classic to gz_x500
- Update VM tested version from Ubuntu 14.04 to 22.04
vscode.md:
- Remove "Ubuntu 18.04" from inotify troubleshooting header
(this issue is not Ubuntu-version-specific)
dev_env_linux_centos.md:
- Update GCC warning to reference current Ubuntu LTS toolchain
instead of old Focal Docker file
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
- Replace "older version" collapsible with info block stating
supported versions: Ubuntu 24.04 (primary) and 22.04
- Remove Gazebo Classic references (Ubuntu 22.04 section, install step)
- Note that GCC version comes from Ubuntu package manager
- Clarify that GCC version depends on Ubuntu release
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
- Remove Ubuntu 18.04 troubleshooting sections (compile errors,
VSCode inotify) — Ubuntu 18.04 is no longer supported
- Remove Gazebo Classic SITL dropdown from first build section
- Update FMUv2 flash warning to reference gcc-arm-none-eabi from
current Ubuntu LTS instead of vague "CI/docker" reference
- Update flash overflow guidance to point at Ubuntu LTS toolchain
- Simplify "too many open files" error example (remove old GCC 7.2.1
path from 2017)
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* docs: modernize README with hero logo, vehicle icons, and fixed links
Add PX4 and Dronecode SVG logos to the repo, replace broken external
Dronecode logo URL, fix SITL badge branch from master to main, and
restructure the README with centered branding, airframe icon row,
quick-start section, and consolidated documentation links.
- Add step to replace "main (planned for:" badges with release version
when preparing release notes (hamishwillee suggestion)
- Define explicit exit criteria for alpha phase: test cards pass,
regressions fixed/triaged, documentation complete
- Differentiate beta testing from alpha: beta is community-driven
validation on extended hardware, not a repeat of alpha test cards
- Define explicit exit criteria for beta->RC transition
- Fix index.md formatting
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
- Move maintainer link to end of index.md in an info block
- Fix link path to use relative ../releases/ prefix
- Clarify tag stages apply to release branches
- Improve Dronecode Test Team formatting with proper link
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Add a docs filter to detect-changes and gate build-site so it is
skipped when a PR only touches the workflow YAML file. Push and
dispatch triggers are unaffected.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Update workflow_dispatch support, fork PR comment guard,
and branch validation in the docs-orchestrator documentation.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Regenerate yarn.lock to include prettier dependency that was added to
package.json but missing from the lockfile, causing CI to fail with
--frozen-lockfile. Also add package-lock.json to .gitignore since the
project uses yarn.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Add conditional metadata generation for PRs that modify both docs and
source files. This fixes broken link checker reports when a PR adds a
new module and documents it simultaneously - previously the link checker
would fail because metadata files are only generated on push to main.
Changes:
- Add docs-orchestrator.yml workflow with:
- detect-changes job to check if PR touches source paths
- pr-metadata-regen job that generates metadata and uploads as artifact
- link-check job that downloads metadata artifact when available
- build-site job for VitePress site generation
- deploy-aws and crowdin-upload jobs for push events
- Prettier formatting step before auto-commit on push
- Add Prettier for markdown formatting:
- Add prettier ^3.2.0 as devDependency in docs/package.json
- Add docs/.prettierrc with prose-preserving config
- Remove normalize_whitespace from metadata_sync.sh (Prettier handles
whitespace normalization now)
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
PX4BuildBot