The previous commit (6b8fd11) gated smbus and smbus_sbs behind
PX4_PLATFORM=="nuttx" to prevent clang-tidy errors on SITL, but these
libraries depend on device::I2C which has a POSIX implementation
(posix/I2C.cpp). Linux boards like bluerobotics_navigator (armhf) and
emlid_navio2 (aarch64) enable CONFIG_DRIVERS_BATT_SMBUS, which depends
on drivers__smbus — causing CMake to fail with "non-existent target".
Move smbus and smbus_sbs back to unconditional add_subdirectory() so
they are available on all platforms. Keep mcp_common gated behind NuttX
since it includes px4_platform/gpio/mcp.hpp (NuttX-only GPIO headers).
Re-add src/lib/drivers/smbus to the Makefile clang-tidy exclude list
since the SITL compilation database lacks the I2C platform headers
needed for analysis.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
The clang-tidy CI target builds against the SITL (px4_sitl_default-clang)
compilation database. Three libraries in src/lib/drivers/ were
unconditionally added via add_subdirectory(), causing them to appear in
compile_commands.json despite requiring NuttX-only headers:
- mcp_common: includes px4_platform/gpio/mcp.hpp (NuttX platform GPIO)
- smbus: extends device::I2C which resolves to the NuttX I2C driver
- smbus_sbs: includes smbus/SMBus.hpp, same I2C dependency chain
When clang-tidy analyzed these files it failed on clang-diagnostic-error
(fatal: header not found) since the platform headers don't exist in SITL.
The previous commit worked around this by adding the paths to
CLANG_TIDY_EXCLUDE_EXTRA in the Makefile, but the proper fix is to prevent
these libraries from entering the compilation database at all.
Gate mcp_common, smbus, and smbus_sbs behind
if(PX4_PLATFORM STREQUAL "nuttx") in src/lib/drivers/CMakeLists.txt.
This follows the established pattern already used by the device/ library
in the same directory, which conditionally includes NuttX-specific sources
(CDev.cpp, I2C.cpp, SPI.cpp) while compiling posix stubs for SITL.
The other libraries in the directory (accelerometer, gyroscope, led,
magnetometer, rangefinder) are pure abstractions over uORB topics and
internal utilities with no platform-specific hardware dependencies, so
they compile fine on all platforms without any gating.
Remove the now-unnecessary mcp_common and smbus paths from
CLANG_TIDY_EXCLUDE_EXTRA, keeping only the emscripten failsafe exclusion
(requires the emscripten SDK, not a platform build issue).
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Implemented driver for MCP23017
* fixed compatability with mcp23009. (naming of instantiated GPIO-Devices)
* removed some comments
* removed even more comments
* commented out instatntiation of driver since it will not be used with v6x
* removed last useless comments
* re-activated gpio_mcp23009 driver, removed useless comments and empty lines
* removed empty lines at the end of mcp23017.cpp
* removed empty line
* Implemented driver for MCP23017
* fixed compatability with mcp23009. (naming of instantiated GPIO-Devices)
* removed some comments
* removed even more comments
* commented out instatntiation of driver since it will not be used with v6x
* removed last useless comments
* re-activated gpio_mcp23009 driver, removed useless comments and empty lines
* removed empty lines at the end of mcp23017.cpp
* removed empty line
* basic working implementation
* first improved driver version with shared code base for MCP23009 & MCP23017 (built as state machine with sanity checks)
* removed unused imports
* changed module name from MCP to MCP230XX
* removed debug print statements
* adjusted auto start command of driver
* removed comments
* -added seperate main functions for both derivative modules (mcp23009 and mcp23017)
* compile common functions as shared library in src/lib/drivers
* fixed cleanup of modules
* ->unclean working version with shared common library
* used make format
* working & cleaned version
* -> Added CallbackHandler to be able to use multiple reading GPIO-expanders simultaneously
-> Removed old mcap23009 calls and pin registrations
-> Adjusted GpioIn.msg to contain MAX_INSTANCES
* ->removed unused imports
->used make format
* Fix: Re-enabled platform_mcp_gpio for accton-godwit, cuav, fmu-v5x
* Fix: enabled platform_mcp_gpio in px4/fmu-v5x
* added depency to fmu-v5x
* Fix: removed new lines
* Fix: fixed linker errors
* removed unused linkage against mcp-library
* Made mcp start calls consistent for fmu-v5x and fmu-v6x
* moved logging of comm errors to read/write function directly
* added perf_count for sanity_check
* removed error message
* ensured member variables follow naming convention
* added retries to probe function
* simplyfied state-logic
* add break to terminate loop early
* ensured clean state when register_gpios() fails
* add registered-flag to pins
* used path from top dir instead of relative path in CMakeLists
* used constexpr to set parameters instead of calculating them at runtime
* style: used make format
* fix: corrected i2c_bus assignment
* style: init input of callbackhandler to 0
* fix: mark pin as registered if successful
* style: made arguments const type
---------
Co-authored-by: Alexander Lerach <alexander@auterion.com>
* uavcan: collect node info and publish every second
* UORB: Add DeviceInformation Message
Format DeviceInformation.msg with standard comment spaces
* SENS: add getter for device_id
* UAVCAN: add publishing of DeviceInformation based on publised message type, and Node Information
* LOG: add deviceInformation
* MSG:BAT: fix comment to be inline with the max_instaces
* UAVCAN: DeviceInformation, incorporated feedback
* UAVCAN: DeviceInformation, incorporated feedback
* UAVCAN: DeviceInformation, Fixed bug with Powermonitor
---------
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
- Added an empty constructor, setPort, and validatePort functions for Serial API
- Changed GPS to not allocate Serial object dynamically
- Moved access check on serial port name into the Serial API
- Improved the Qurt platform validatePort Serial function to implement a more rigorous check. Added safety check
to the setPort Serial function to make sure it isn't called after the port has been already opened.
* created a Performance Model for fixed wing vehicle
- added compensation for maximum climbrate, minimum sinkrate, minimum airspeed and trim airspeed based on weight ratio and air density
- added atmosphere lib to standard atmosphere calculations
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com>
Co-authored-by: Thomas Stastny <thomas.stastny@auterion.com>
- first version of IMU driver for the VOXL 2 platform (Qurt)
- this is a customized version of the Invensense ICM42688P driver, it is currently in the VOXL 2 board directory
- sensor_baro.msg use SI (pressure in Pascals)
- update all barometer drivers to publish directly and remove PX4Barometer helper
- introduce baro cal (offset) mainly as a mechanism to adjust
relative priority
- commander: add simple baro cal that sets baro offsets to align with
GPS altitude (if available)
- create new sensors_status.msg to generalize sensor reporting
- consider data clipped/saturated if it's INT16_MIN/INT16_MAX or within 1
- this accommodates rotated data (|INT16_MIN| = INT16_MAX + 1) and sensors that may re-use the lowest bit for other purposes (sync indicator, etc)
Eric Katzfey