 Robert Dickenson
|
abeb2b9c7e
|
Hopefully the last of the trivial minor fixups before being able to PR
|
2016-03-08 09:29:17 +01:00 |
|
|
Robert Dickenson
|
d65bd3f1bd
|
Add magnetometer range and temperature to the 'test' output report
|
2016-03-08 09:29:17 +01:00 |
|
|
Robert Dickenson
|
7061bc804a
|
Remove file with only whitespace change as not required in PR
|
2016-03-08 09:29:17 +01:00 |
|
|
Robert Dickenson
|
95e51ed8c6
|
Cleanup mpu9250 driver in preparation for PR
|
2016-03-08 09:29:17 +01:00 |
|
|
Robert Dickenson
|
4ef9148517
|
Preparing MPU9250 driver for PR
Corrected magnetometer gain and alignment, added support for sensitivity adjustment values, cleaned up debugging messages and removed dead code.
|
2016-03-08 09:29:17 +01:00 |
|
|
Robert Dickenson
|
0a33ca6e57
|
Align the magnetometer axis with the accel/gyro
|
2016-03-08 09:29:17 +01:00 |
|
|
Robert Dickenson
|
5903891213
|
Significant work on mpu9250 driver to get magnetometer updates happening reliably. Improved 'mag' utility to aid driver development and testing.
|
2016-03-08 09:29:17 +01:00 |
|
|
Robert Dickenson
|
bad571ebab
|
Add required define for the new MPU9250 magnetometer
|
2016-03-08 09:29:17 +01:00 |
|
|
Robert Dickenson
|
0050057392
|
Add internal AK8963 magnetometer support to the MPU9250 device driver
|
2016-03-08 09:29:17 +01:00 |
|
|
Kabir Mohammed
|
309212b52b
|
px4flow : rotate gyro readings as well
|
2016-03-08 08:52:08 +01:00 |
|
|
David Sidrane
|
f0b770a3ce
|
Use correct CS defines to disable chip selects
Repair one more cut and past mistake I made.
https://github.com/dipspb/PX4Firmware/blob/px4-master-sensor_reset_fix/src/drivers/px4fmu/fmu.cpp#L2167-L2170
Should not have OFF
|
2016-03-06 18:04:25 +01:00 |
|
|
Julian Oes
|
1cebfde840
|
gps: make the driver compile and run on QURT
|
2016-03-06 18:02:50 +01:00 |
|
|
Dmitry Prokhorov
|
6f2a4f3d82
|
Fix sensor_reset method for PX4FMU_V4
|
2016-03-04 14:19:03 +03:00 |
|
|
Mark Whitehorn
|
53ed61790d
|
fix typo in comment
|
2016-03-01 09:21:58 +01:00 |
|
|
Mark Whitehorn
|
98a4dd6a4a
|
run astyle
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
bebe8b0a78
|
init frsky_state properly
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
ab596e3711
|
scan indefinitely for FrSky RX, report state in status
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
607053cfbc
|
decrease stack allocation to 1100
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
52465d07b9
|
run astyle
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
8186139dad
|
reduce D-type stack usage and static allocations
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
6d2927cd7a
|
allocate structs on the heap; exit daemon if no FrSky receiver detected
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
95d328f57c
|
remove commented code and change to sensor_baro topic to filter altitude
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
6d509835eb
|
clean up uORB code
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
0960e1a820
|
make structs static and decrease stack size, run astyle
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
6fa6e72250
|
add sPort GPS telemetry
|
2016-03-01 09:02:14 +01:00 |
|
|
Mark Whitehorn
|
fcfe64ee5a
|
enable disarmed PWM and rework safety switch disable logic
|
2016-02-29 12:29:30 -07:00 |
|
|
Mark Whitehorn
|
29b0520263
|
enable PWM with safety switch off
|
2016-02-29 12:29:30 -07:00 |
|
|
Lorenz Meier
|
ba79b32b30
|
Fix FMU output on non-Pixracer boards
|
2016-02-28 12:11:47 +01:00 |
|
|
Andreas Bircher
|
261ddb8e21
|
online command support to enable/disable distance based triggering
|
2016-02-27 11:41:57 +01:00 |
|
|
Andreas Bircher
|
2cce938980
|
implementing @LorenzMeier comments
|
2016-02-27 11:41:57 +01:00 |
|
|
Andreas Bircher
|
8959954d37
|
adding third camera triggering mode to trigger based on covered horizontal distance. bench-tested.
|
2016-02-27 11:41:57 +01:00 |
|
|
Mark Whitehorn
|
04a9eada1e
|
disable safety switch if CBRK_IO_SAFETY is on
|
2016-02-27 11:25:56 +01:00 |
|
|
Mark Whitehorn
|
beb9707933
|
fix fmuv1 compile error
|
2016-02-27 11:25:56 +01:00 |
|
|
Mark Whitehorn
|
426903c617
|
run astyle
|
2016-02-27 11:25:56 +01:00 |
|
|
Mark Whitehorn
|
b6231c718b
|
reduce safety switch sampling to ~10Hz and clean up
|
2016-02-27 11:25:56 +01:00 |
|
|
Mark Whitehorn
|
ef2a7bda53
|
add fmuv4 safety switch handling
|
2016-02-27 11:25:56 +01:00 |
|
|
Mark Whitehorn
|
5a7d31f7a9
|
fix typo in comment
|
2016-02-27 11:25:56 +01:00 |
|
|
Lorenz Meier
|
a2c4c094e6
|
HoTT stack size adjustments
|
2016-02-25 22:20:42 +01:00 |
|
|
Lorenz Meier
|
755569ac12
|
HDOP / VDOP correctly reporting
|
2016-02-25 13:45:34 +01:00 |
|
|
Lorenz Meier
|
fdff16c3cb
|
Always enable nav sol
|
2016-02-25 13:45:34 +01:00 |
|
|
Lorenz Meier
|
8fcf24f23f
|
GPS driver UBX: Support hdop and vdop
|
2016-02-25 13:45:34 +01:00 |
|
|
Lorenz Meier
|
6f484c04bd
|
Ashtech GPS driver: Fix code style
|
2016-02-25 13:45:34 +01:00 |
|
|
Lorenz Meier
|
56c95dc9c8
|
GPS driver: Populate HDOP / VDOP fields
|
2016-02-25 13:45:34 +01:00 |
|
|
Lorenz Meier
|
9172bf7271
|
MPU6K: Report start scan not as failure, but as not found if sensor is not around
|
2016-02-23 13:09:06 +01:00 |
|
|
Lorenz Meier
|
738d3cb123
|
IO driver: Fixx lockdown flag handling
|
2016-02-23 13:09:06 +01:00 |
|
|
Lorenz Meier
|
3854eae3ec
|
FMU: Send disarmed pulse if in lockdown
|
2016-02-23 13:09:06 +01:00 |
|
|
jwilson
|
9a97140ad8
|
Removing test code.
|
2016-02-19 16:59:49 +01:00 |
|
|
jwilson
|
8625641638
|
Removing test code.
|
2016-02-19 16:59:49 +01:00 |
|
|
jwilson
|
b31472af0c
|
Cherry-picked i22438c8
Original description:
Modified the sensor module to prevent the selection of an invalid
secondary/tertiary gyro if the primary gyro times out
|
2016-02-19 16:59:49 +01:00 |
|
|
jwilson
|
aec31c5904
|
Defining Eagle Board specific device paths, still in progress.
|
2016-02-19 16:59:49 +01:00 |
|