ca84cc7439
mc_pos_control: delete max altitude, which is not set by landdetector
2017-02-27 22:54:19 +01:00
a1982e0392
land_detector: battery level status to adjust maximum altitude possible
2017-02-27 22:54:19 +01:00
c8690fd072
mc_pos_control: limit altitude
...
mc_pos_control: delete spaces
mc_pos_control: cleanup and threshold for velocity control to altitude control when close to max altitude
2017-02-27 22:54:19 +01:00
5c524e15f8
Battery params: Enforce system reboot
2017-02-27 16:37:08 +01:00
3961c46d68
UAVCAN: Incorporate manual loackdown
...
This flag is triggered when the manual kill switch is activated. The motors
did not stop when the kill switch was engaged before adding this check.
2017-02-27 12:48:30 +01:00
16530e15db
Commander: Differentiate between emergency battery level and critical battery level
2017-02-27 09:03:20 +01:00
029c6de4a9
Battery estimator: Warn on dangerously low levels.
...
We need to differentiate between a level where the user should act and where we are about to fall out of the sky (emergency). This helps performing more suitable failsafe actions.
2017-02-27 09:03:20 +01:00
7710b64d27
Navigator: Re-initialize RTL every time it gets re-enabled
2017-02-26 13:26:52 +01:00
6ce5807240
mavlink: Send message to control onboard camera as broadcast
...
The target was it self.
2017-02-25 19:03:45 +01:00
fe4ea6dd63
VTOL mc_pos reset internal state during FW mode
2017-02-25 17:57:05 +01:00
1b2973f602
VTOL fw_att don't reset integrators during transition
2017-02-25 17:57:05 +01:00
8fd27fddcd
mc_pos_control: moved responsibility of the x,y stick deadzone to a mathematical function
...
to prevent a setpoint step when moving the stick over the border of the deadzone
and to enable very small inputs even from a control stick that needs a big deadzone
2017-02-25 11:05:53 +01:00
ad3d0391ab
Navigator: Only update params as they change
2017-02-25 11:04:52 +01:00
ecb2511a7b
add matrix copyTo
2017-02-25 11:04:02 +01:00
f43f3baa02
ATT_VIBE_THRESH param: move the definition of this param to sensors
...
since it's only used in sensors module (otherwise it could get pruned)
2017-02-25 11:02:15 +01:00
cfa84954ea
param_get: add null-pointer check
...
If param_find() returned PARAM_INVALID, and this was directly passed to
param_get(), param_get_value_ptr() returned null and we read garbage data
(or segfaulted on systems with virtual memory).
On px4fmu-v2, this happened for the param ATT_VIBE_THRESH in sensors.
Because of the recently added parameter scoping, this param got pruned, as
it's defined in attitude_estimator_q.
credits for finding this go to Jeyong Shin (jeyong).
2017-02-25 11:02:15 +01:00
3e88b2f2b1
Rate-limit navigator update rate
2017-02-24 08:52:10 +01:00
80e1064523
mavlink : fix legacy vision interface attitude timestamps
2017-02-24 08:51:05 +01:00
058bc97c83
commander preflight calibration: accept param6 == 2 for airspeed calibration as well
...
This is according to the updated mavlink spec to deconflict the definition
with APM.
2017-02-24 08:24:53 +01:00
3a358422c4
mc_pos_control: change sign for close to ground + style fix
2017-02-23 23:26:17 +01:00
de9d05c292
mc_pos_control: uorb home_postition subscription
2017-02-23 23:26:17 +01:00
e6031a97fa
land_detector: added a parameter for the manual land detection stick throshold
...
because it is definitely something that needs to be allowed to tune or disable for different application scenarios
2017-02-23 13:18:49 +01:00
4bffb1478f
ekf2: added parameter for range sensor pitch offset
...
Signed-off-by: Roman <bapstroman@gmail.com >
2017-02-22 22:21:41 +01:00
3183cbda90
land_detector: manual land detection stick throshold less strict
...
Even for well calibrated RC sticks 5% stick movement is a too small margin for the end user that might not land because of this.
15% is still clearly restricting the stick far down.
2017-02-22 21:56:41 +01:00
cbc54c9917
mc_pos_control: only swithc to velocity control from hold_engaged when user moves stick
2017-02-22 20:48:40 +01:00
d7683e97a3
MC pos control: More landing handling
2017-02-22 09:33:12 +01:00
c55fa9dd3f
MC pos control: add option to use takeoff yaw
2017-02-22 09:21:20 +01:00
4ddc7e22fb
MC pos ctrl: Force slow landing speed below min loiter altitude
2017-02-21 22:01:20 +01:00
1d370f3470
MC pos control: Improve landing handling
2017-02-21 21:57:18 +01:00
20604989bb
mc_pos_control: have same acceleration max for xy and z
2017-02-21 21:50:00 +01:00
2788cf8ffc
mc_pos_control: manual stick input fix; deletion of unusued function
2017-02-21 16:47:46 +01:00
7fc8ee85fa
Commander: Do not break out of RTL on stick input change
2017-02-21 13:56:31 +01:00
ed5c8913ad
events: update documentation for polyfit algorithm
2017-02-20 07:53:07 +01:00
11484b0d51
Rattitude: set default threshold for multicopter rattitude mode to 0.8 which enables it right away when selecting it
2017-02-18 08:03:19 +01:00
44d05bac55
Rattitude: enable for FW in old style switch mapping
2017-02-18 08:03:19 +01:00
e81e6a8296
fw_att_control add rattitude mode
2017-02-18 08:03:19 +01:00
9120082b0c
fw_att_control stabilized mode publish att_sp quat
2017-02-18 08:03:19 +01:00
12e5aca028
fw_att_control remove unused accel sub
2017-02-18 08:03:19 +01:00
f6eecf4d5c
commander tests group TRANSITION_CHANGED tests
2017-02-18 08:03:19 +01:00
c14c9c20eb
commander tests allow FW ACRO
2017-02-18 08:03:19 +01:00
459b8b7c7e
FW att: removed unused fields again
2017-02-18 08:03:19 +01:00
e04fe593e0
Tiltrotor: option to enable differential thrust in forwards flight
2017-02-18 08:03:19 +01:00
b19cd19411
FW Acro: udpate ECL and implemented fixed-wing Acro
2017-02-18 08:03:19 +01:00
a5f3f65c2b
Switch assignment: added manual and stabilized switch for a default stabilized switch scheme, let FW go into Acro
2017-02-18 08:03:19 +01:00
e4ca10363b
mavlink MAV_CMD_IMAGE_START_CAPTURE message: send request for highest resolution
2017-02-17 23:01:25 +01:00
1a81b64d49
VEHICLE_CMD_PREFLIGHT_CALIBRATION: update temperature_calibration param definition
2017-02-17 23:01:25 +01:00
51c8e90508
FW att control: Increase stack size to ensure limits
2017-02-17 22:31:55 +01:00
7659402fdb
WIP: valgrind runtime analysis and fixes ( #6521 )
...
* Fix several valgrind identified mem leaks
* Added callgrind target.
* px4_posix_tasks use nullptr
2017-02-17 12:36:52 -05:00
a4050db766
param: comment what the lock is needed for
2017-02-17 11:27:08 +01:00
df8f0da70c
param & param_shmem: enable locking
...
We need to protect access to the param_values array. This is dynamically
allocated and resized (utarray_reserve() calls realloc). If some thread
was iterating the array while another was resizing the array, the first one
would iterate on a freed array, thus accessing invalid memory.
On NuttX this could lead to hardfaults in rare conditions.
Unfortunately we need to initialize the semaphore on startup, by calling
sem_init(). This adds a param_init() method called by every board/config
that uses the params (at least I think I've found all of them)
2017-02-17 11:27:08 +01:00
Dennis Mannhart