5f786af8fa
mavlink: status is a pointer
2014-05-04 15:02:37 +02:00
0e31b5935e
remove trailing whitespace
2014-05-04 15:02:30 +02:00
ee580206b4
mavlink: Only sending HIL control commands if the system is actually armed
2014-05-04 14:06:38 +02:00
5199dea2b3
Merge pull request #876 from PX4/autodeclination
...
Added automatic declination lookup
2014-05-03 03:41:30 -07:00
f6d61dfb4c
mavlink: swap x and y when handling MANUAL_CONTROL mavlink message
2014-05-01 23:45:21 +02:00
2829d65871
Merge pull request #881 from PX4/led_fix
...
commander: Stop mixing board support and high level code - just accept t...
2014-04-30 06:34:34 -07:00
1dfa2f100e
commander: Stop mixing board support and high level code - just accept that non-mandatory leds may or may not be there
2014-04-30 15:33:47 +02:00
0c58588a87
mc_att_control: yaw feed-forward in manual control modes fixed
2014-04-29 19:51:05 +02:00
2ee02e5e4b
Merge pull request #874 from jean-m-cyr/master
...
Proper data manager restart handling
2014-04-29 07:53:30 +02:00
da525f29f1
Add missing header in mixer load command
2014-04-28 19:25:13 +02:00
4378454a10
mc_pos_control: hotfix, MPC_TILTMAX_AIR and MPC_TILTMAX_LND parameters fixed
2014-04-28 17:49:57 +02:00
ac52111085
px4io: support PX4IO_P_SETUP_FORCE_SAFETY_OFF
...
this allows the FMU to force the safety off on the IO board. Useful in
two cases:
1) vehicles where the safety switch is impractical or not useful
(eg. HAB planes or internal combustion motors)
2) doing ESC calibration on multi-copters
2014-04-28 11:45:20 +02:00
ab257ebcce
Proper data manager restart handling
...
Introduce SYS_RESTART_TYPE parameter having one of 3 values: boot
restart, inflight restart, or unknown restart, and defaulting to unknown
restart.
px4io.cpp sets this parameter according to the type of restart detected.
dataman.c retrieves this parameter and clears data entries according to
their persistence level. Does nothing if unknown restart.
2014-04-28 00:52:19 -04:00
08408594ec
Renamed parameters which changed from RAD to DEGREES to avoid user confusion. Also made naming of the two parameters more consistent.
2014-04-27 16:06:34 +02:00
e6d332aa7c
Make commander less pedantic about position status
2014-04-27 15:50:53 +02:00
c74248c8b1
Merged mpc_rc with master
2014-04-27 15:45:33 +02:00
4a949a9565
Merge pull request #749 from DonLakeFlyer/ArmDisarm
...
Arm/Disarm duplication removal and support for Disarm in VEHICLE_CMD_COMPONENT_ARM_DISARM
2014-04-26 12:24:42 +02:00
5bd8e6f6b3
Merge pull request #845 from PX4/mag_decl_hotfix
...
Mag declination hotfix
2014-04-26 12:23:48 +02:00
eb520e7dcd
Merge pull request #849 from PX4/compile_pedantic
...
Compile pedantic
2014-04-26 12:22:13 +02:00
84943644d7
mc_pos_control: parameters comments minor fixes
2014-04-25 23:06:32 +02:00
a432ed4900
mc_pos_control: convert tilt_max to degrees
2014-04-25 22:53:48 +02:00
2453b354fa
Failsafe landing without position control fixed
2014-04-25 22:26:51 +02:00
0c1de81785
Merge branch 'master' into mpc_rc
2014-04-25 21:39:59 +02:00
f0298e005a
Merge pull request #852 from PX4/sensors_loop
...
sensors: Keep looping in sensors app even if gyros do not update any mor...
2014-04-25 16:52:53 +02:00
22aaae197b
Merge branch 'rc_timeout' into mpc_rc
2014-04-24 22:40:46 +02:00
63c50676f9
MISSION switch renamed to LOITER
2014-04-24 22:38:19 +02:00
db474072a7
Merge branch 'rc_timeout' into mpc_rc
2014-04-23 19:03:03 +02:00
56592ec77d
commander: don't start RTL on failsafe if landed
2014-04-23 19:01:05 +02:00
d7d6a3d3b7
filter gps simulation hil gps message with sysid
2014-04-23 16:26:44 +02:00
a2940182ef
add parameter to mavlink app to allow parsing of HIL GPS message even if not in HIL mode
...
Conflicts:
src/modules/mavlink/mavlink_receiver.cpp
2014-04-23 15:53:48 +02:00
34597599fc
navigator: merging bug fixed
2014-04-23 15:26:24 +02:00
dc8a0b291a
Merge branch 'mpc_local_pos' into mpc_rc
2014-04-23 15:25:13 +02:00
320c97c498
navigator: check if mission reached on vehicle_status updates
2014-04-23 15:24:45 +02:00
2998685a3a
Merge branch 'mpc_local_pos' into mpc_rc
2014-04-23 14:22:52 +02:00
60554c8a56
navigator: publish global_position_setpoint on vehicle_status updates
2014-04-23 14:15:59 +02:00
a1cf8801bb
sdlog2: add failsafe state logging
2014-04-22 11:36:25 +02:00
e4a4430f9f
Merge branch 'master' into rc_timeout
2014-04-22 11:18:07 +02:00
302233a34f
Merge branch 'master' into mpc_local_pos
2014-04-22 11:13:11 +02:00
aefea1a95d
Merge pull request #850 from PX4/mavlink_startup_cleanup
...
mavlink: Start the same in HIL mode as in normal mode. Requires all HIL ...
2014-04-22 09:57:56 +02:00
bf4558c31b
Reduce data manager SD card wear and tear
...
When the data manager was first designed each file record contained a 2
byte header and an 126 byte data section, resulting in a record length
of 128 bytes. Along the way it was decided to add 2 spare bytes to the
record header, but regrettably the data section was not correspondingly
reduced in size so we end up with a record length of 130 bytes. This is
bad since it does not align with SD card flash sectors and results in
more erase/write flash cycles than necessary thus reducing the SD cards
life.
This update reduced the data section of the data manager to 124,
resulting in an optimal record length of 128 bytes.
In order to avoid the reuse of data previously written data in the old
format, which could result in catastrophic misinterpretation, the data
manager file is checked at startup. If it is found to be in the old
format, it is deleted and recreated with in the new record length. In
this case previously stored data is lost, but that is far safer than the
unpredictable result of using the old file.
2014-04-22 01:19:01 -04:00
a0c9227044
commander: Also publish battery status in HIL, since we have a fake battery available and the system freaks out without knowing its main supply
2014-04-22 01:38:15 +02:00
ca77c380b5
sensors: Keep looping in sensors app even if gyros do not update any more. There are lots of other reasons we might want to keep clocking the system. This resolves the RC timeout dependency in HIL.
2014-04-22 01:25:25 +02:00
815e221c1f
mavlink: Start the same in HIL mode as in normal mode. Requires all HIL tools to run sh /etc/init.d/rc.usb now. Improve UART error handling
2014-04-22 01:23:55 +02:00
267b78f072
Fix of errors triggered by more pedantic compile options
2014-04-21 21:31:30 +02:00
5e32ca29d5
Fixed LPOS message in log, added ground flags field
2014-04-21 21:25:54 +02:00
6297b451ba
sdlog2: Fix indendation to expose length better, cut string lengths for excessive strings
2014-04-21 21:00:24 +02:00
65e2062d7b
sdlog2: fix lpos labels string, shorten messages with excessive length
2014-04-21 20:56:02 +02:00
1f2e972ea6
mavlink: remaining battery scaling fixed
2014-04-21 12:16:45 +02:00
8634780e80
Merge branch 'master' into mpc_rc
2014-04-20 20:10:39 +02:00
2ea32b315f
Merged master
2014-04-20 02:04:05 +02:00
Thomas Gubler