fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-07-05 04:40:35 +08:00
Code Issues Packages Projects Releases Wiki Activity
34,118 Commits 852 Branches 161 Tags
3e4b8763a5f138269d35814011dc156f3ee04d33
Commit Graph

5665 Commits

Author SHA1 Message Date
Beat Küng 3e4b8763a5 nuttx: add mcp23009 gpio driver 2021-01-15 10:57:20 -05:00
Beat Küng 12ebbd995d bmp388: wait a bit longer to schedule first cycle after reset 2021-01-15 10:57:20 -05:00
Beat Küng 529c3112ac bmp388: quiet if startup fails (no sensor on bus) 2021-01-15 10:57:20 -05:00
Daniel Agar e96571b45d uavcannode: GPS working on cuav_can-gps-v1 
- use sensor_gps directly from sensor rather than vehicle_gps_position (aggregated value)
 2021-01-13 22:06:46 -05:00
Daniel Agar bc8ec5d1f5 uavcannode: support optical_flow 2021-01-13 19:35:28 -05:00
Jannik Beyerstedt 3834690c4b Add parameter to select the set of used GNSS systems 2021-01-13 08:33:07 +01:00
JacobCrabill 917fef546a uavcan: Remove single-GNSS limitation from UavcanGnssBridge 2021-01-12 22:04:52 -05:00
Daniel Agar a57b9f9381 delete drv_baro.h, drv_mag.h, drv_range_finder.h, drv_device.h and purge UAVCAN CDev usage 2021-01-12 22:04:52 -05:00
Beat Küng daaf8b61dc drivers: remove ism330dlc 
not used anymore
 2021-01-12 09:55:59 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar 967d35a6b6 rate limit most parameter_update subscriptions 
- parameter updates can be quite expensive because they trigger nearly all modules to reload all of their parameters immediately
 - limit modules from updating faster than once per second
 2021-01-10 21:09:15 -05:00
Daniel Agar 6c9072720e invensense/icm42688p: use full 20 bit data, increase ODR, disable all filters 2021-01-06 17:03:39 -05:00
garfieldG 3fb8f5df62 drivers/lsm303agr: fixed bug incorrectly assembling signed 16 bit integer from bytes 2021-01-05 21:37:08 -05:00
Lorenz Meier a444d2610a Spektrum passive power: Only use if present 2020-12-31 13:22:52 +01:00
Lorenz Meier 641cc33d79 RC input: Always report DSM state 2020-12-31 13:22:52 +01:00
Lorenz Meier 6529e1444f RC input: Better monitoring 
The output is now less confusing in terms of which protocol is currently active.
 2020-12-31 13:22:52 +01:00
Lorenz Meier 2d1551e5bf PX4IO: Acknowledge binding 2020-12-31 13:22:52 +01:00
Lorenz Meier 8445a08bff RC input: Acknowledge binding (or indicate that feature is not implemented) 2020-12-31 13:22:52 +01:00
Lorenz Meier 44bdd5456f PX4IO: Bind if not armed 
DSM binding was disabled before if safety was off, which on a lot of multicopters is today the default. The logic is now checking instead for wether the system is armed.
 2020-12-31 13:22:52 +01:00
Lorenz Meier fda63f802e Tone alarm: Adjust log levels 
The earlier log levels represented normal operation scenarios as errors, this aligns the log levels.
 2020-12-31 01:05:30 +01:00
PX4 BuildBot 7861377e20 Update submodule devices to latest Tue Dec 22 00:39:39 UTC 2020 
- devices in PX4/Firmware (68b6cca3bc4cd3c70ab1ea5c439e5941370e801e): https://github/commit/86b09d332041acebc35c9a0476d8dfc2752dfe39
    - devices current upstream: https://github/commit/9282d3d73391859f51c759a343a052dfb1be02e0
    - Changes: https://github/compare/86b09d332041acebc35c9a0476d8dfc2752dfe39...9282d3d73391859f51c759a343a052dfb1be02e0

    9282d3d 2020-12-21 Silvan Fuhrer - ubx: change uart2_baudrate to 230400
 2020-12-22 07:43:50 +01:00
Ramón Hernán Roche Quintana 90f61c2f9a Update submodule GPSDrivers to latest Wed Dec 16 18:45:08 UTC 2020 
ubx: fix #63: NAV-SAT/ SVINFO parser bug https://github.com/PX4/PX4-GPSDrivers/commit/86b09d332041acebc35c9a0476d8dfc2752dfe39
 2020-12-17 08:28:25 +01:00
Daniel Agar 74083d6bd1 optical_flow/paw3902: minor improvements 
- verify register writes
 - cleanly reset on lighting mode changes as per the datasheet
 - perf counters for mode switches and other errors
 - cleanly reset on false motion detection
 - minimize sleep on reset
 - allowing setting custom rotation yaw angle directly on command line with -Y (ignoring SENS_FLOW_ROT)
 - enable LED output
 2020-12-16 20:04:46 -05:00
Julian Oes 314b5e721f src: remove NuttX ifdefs around args 
It doesn't look like they are required anymore.
 2020-12-14 09:26:18 +01:00
Daniel Agar ef6209ba03 new manual_control_switches msg (split out of manual_control_setpoint) (#16270) 
- split out switches from manual_control_setpoint into new message manual_control_switches
 - manual_control_switches published at minimal rate (~ 1 Hz) or immediately on change
 - simple switch debounce in rc_update (2 consecutive identical decodes required)
 - manual_control_switches logged at full rate rather than sampled at (5-10% of messages logged)
 - manual_control_setpoint publish at minimal rate unless changing
 - commander handle landing gear switch for manual modes
 - processing of mode_slot and mode_switch is now split so we only do one or the other (not both)
     - a future step will be to finally drop mode_switch and accompanying switches entirely

Co-authored-by: Matthias Grob <maetugr@gmail.com>
 2020-12-11 12:11:35 -05:00
Orkun Aşa a6b7add2fe SENS_EN_VL53L1X parameter is implemented to enable VL53L1X distance sensor 2020-12-09 17:55:38 +01:00
Igor Campos 9c3b70d517 remove default value for roll angle 2020-12-09 17:54:53 +01:00
Igor Campos bbad1bdd6e add comment. 2020-12-09 17:54:53 +01:00
Igor Campos 33b831efe3 rename variables 2020-12-09 17:54:53 +01:00
Igor Campos dfcd6a7c16 fix typo 2020-12-09 17:54:53 +01:00
Igor Campos c316af6ec7 update to match new feature as a new mavlink command Oblique Survey 260 2020-12-09 17:54:53 +01:00
Igor Campos 390ed3765f disable pseudo-oblique mode if param4 is 0. 2020-12-09 17:54:53 +01:00
Igor Campos 38a5b8a502 fix comment description for pitch angle 2020-12-09 17:54:53 +01:00
Igor Campos d0ae931543 adjust minimum number of positions to 2. 2020-12-09 17:54:53 +01:00
Igor Campos 0cb3ce4886 fix readability 2020-12-09 17:54:53 +01:00
Igor Campos e1e06364da fix formatting 2020-12-09 17:54:53 +01:00
Igor Campos 73f7b08873 add Camera Auto Mount Pseudo Oblique Solution (CAMPOS) 
add target system and component ids to vmount commands

Signed-off-by: Igor Campos <igor.gama.90@gmail.com>
 2020-12-09 17:54:53 +01:00
Mark Sauder dd4ee5c48c dshot: breakout driver header file, use static_casts, add const specifiers (#15908) 
* Break out dshot.h from dshot.cpp and rename files to reflect the class name.
Move DShot class specific #defines from drv_pwm_output.h to dshot.h.
Replace c-style casts with static_casts, standardize method naming, single line comment styles, and formatting.
Rename update_dshot_out_state() to enable_dshot_outputs().
 2020-12-09 08:51:47 +01:00
Roman Dvořák bc1c8fb73a GPS_DUMP_COMM: dump all gps instances 2020-12-08 11:45:24 +01:00
bresch 3276916df9 HomePos: check corresponding validity before using data 2020-12-07 10:24:23 -05:00
Daniel Agar cc979d2249 Update submodule GPSDrivers to latest Fri Dec 4 00:39:25 UTC 2020 
- devices in PX4/Firmware (1303a8f17c5174a02b1c3ed22acd88da499e5a53): https://github/commit/0bf63c9820f4af997d0a48743dcc1008d119e49c
    - devices current upstream: https://github/commit/5afc11588b2b6ec0861ecf9ef673c7a9e2109129
    - Changes: https://github/compare/0bf63c9820f4af997d0a48743dcc1008d119e49c...5afc11588b2b6ec0861ecf9ef673c7a9e2109129

    5afc115 2020-11-30 Beat Küng - gps_helper: define M_PI_F if not defined (was missing for ubx)
 2020-12-03 23:48:29 -05:00
Daniel Agar d654be761c ms4525: remove old voltage corrections 
- this isn't correct for all boards and we now have airspeed scale
factor estimation
 2020-12-01 09:34:47 -05:00
Alex Mikhalev 378b41af6a tunes: Improve logic for interrupting tunes 
src/lib/tunes already knows which tunes are interruptable, so add
return values to expose than and use than in tone_alarm.
This fixes the issue that repeating tunes cannot be interrupted without
tune_override set to true.

Signed-off-by: Alex Mikhalev <alex@corvus-robotics.com>
 2020-11-30 16:56:13 -05:00
SalimTerryLi 2d0eb4a41a pca9685_pwm_out: small improvement (#16196) 
* reduce I2C transfers and enable EXTCLK support
* schedule rate limit arg
* apply state machine and do actual init in Run()
 2020-11-27 17:17:45 -05:00
David Sidrane ee3285a34f Fixed PX4IO uploader debug output 2020-11-19 13:35:36 -05:00
CUAV_gitfishup 80df04ddca UAVCAN: publish ardupilot::indication::SafetyState (enables CUAV NEO v2 pro GPS) 2020-11-18 10:00:49 -05:00
Daniel Agar 3f9e5a6934 drivers/device/ringbuffer: move into crazyflie syslink (only remaining user) 2020-11-17 19:47:06 -05:00
bresch 5f0c572c61 GPS_YAW_OFFSET: fix param description 2020-11-12 09:35:40 +01:00
Daniel Agar 880dc6accd ekf2: compile at MAX_CUSTOM_OPT_LEVEL 2020-11-11 20:17:52 -05:00
Daniel Agar 68f24954cf imu/st/lsm9ds1: refactor to same form as other new IMU drivers 
- register configuration captured in table and checked periodically
 - simple state machine
 - all driver sleeps removed
 - driver respects IMU_GYRO_RATEMAX
 2020-11-11 19:22:12 -05:00