255e19f9a7
ci: filename extension for logs download
2024-08-21 07:09:55 -07:00
148c7ceb21
tests: increase timeout for px4 health checks
2024-08-21 07:09:55 -07:00
6049d96274
ci: upload failed logs
2024-08-21 07:09:55 -07:00
5b3bd52d05
tests: increase wait time to 30s
2024-08-21 07:09:55 -07:00
d28dbd9f05
ci: only run sitl for debug session
2024-08-21 07:09:55 -07:00
4576208c80
ci: debug sitl test failure
2024-08-21 07:09:55 -07:00
d301e34e10
ci: run on 16 cores and debug sitl
2024-08-21 07:09:55 -07:00
61550c737e
ci: run sitl tests after board builds
2024-08-21 07:09:55 -07:00
86a2409247
ci: share base cache key
2024-08-21 07:09:55 -07:00
2640c22844
ci: fix base container for debug
2024-08-21 07:09:55 -07:00
0aed52f320
ci: share base cache and run on beefier cpu
2024-08-21 07:09:55 -07:00
f7a6374aa5
ci: run sitl tests on dronecode infra
2024-08-21 07:09:55 -07:00
6209e87f25
ci: run sitl tests after succesful builds
2024-08-21 07:09:55 -07:00
10c6add097
ci: try runs-on Dronecode Infra
2024-08-21 07:09:55 -07:00
3478765c31
Navigator: MissionFeasibilityCheck: Rework 1st waypoint check ( #23568 )
...
* FeasibilityChecker: only warn when first waypoint is too far, but still accept mission as valid
* feasiblityChecker: make distance to first waypoint check against home position instead of current position, so it is more constant during a flight
* Apply suggestions from code review
Co-authored-by: Silvan Fuhrer <silvan@auterion.com >
* feasibilityCheckerTest: update tests to not fail for first waypoint check
* feasibilityChecker: make comment for 1stwaypointcheck event
* Feasibility check unit test: fix comment
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
---------
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
Co-authored-by: Silvan Fuhrer <silvan@auterion.com >
2024-08-21 09:08:36 +02:00
f252e20eae
Revert "Update GZBridge to be able to use gazebo airspeed. Add quadtailsitter. ( #23455 )" ( #23583 )
...
This reverts commit 7e45f491521.732mackay@gmail.com >
2024-08-20 19:36:08 -04:00
0931179579
ekf2: extract WMM update logic
2024-08-20 10:32:27 -04:00
98eae3cd4c
fix: make help on Ubuntu 22.04
...
Ubuntu 22.04 uses make 4.3 which broke the current `make help` target
Reference:
https://stackoverflow.com/a/26339924
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@gmail.com >
2024-08-19 11:19:31 -04:00
f2f4488594
drivers/gps: publish secondary instance satellite_info if main instance is advertised
2024-08-19 11:14:12 -04:00
ecfdbd2e60
littlefs: needs more stack when used
2024-08-19 11:05:50 -04:00
c60b1d1a5f
board_hw_rev_ver: Support EEPROM-only HW IDs
2024-08-19 11:05:50 -04:00
07734c243f
mtd: Initialized the RAMTRON speed with 30MHz
2024-08-19 11:05:50 -04:00
072892fbef
romfs: rcS: support storage on other then SD card
2024-08-19 11:05:50 -04:00
746ae25768
ci: replace build workflows ( #23550 )
2024-08-19 10:41:25 -04:00
0481c04b2b
Nuttx with backport (stm32h7x3x): Add External Power Supply option
2024-08-19 09:22:17 -04:00
4d21110cfb
Documentation - improved GCS parameter readablity ( #23376 )
...
improved GCS parameter description
Co-authored-by: Hamish Willee <hamishwillee@gmail.com >
Co-authored-by: Silvan Fuhrer <silvan@auterion.com >
2024-08-19 13:36:04 +02:00
7e45f49152
Update GZBridge to be able to use gazebo airspeed. Add quadtailsitter. ( #23455 )
...
* Update GZBridge to be able to use gazebo airspeed. Add gz quadtailsitter.
* Fix formatting
---------
Co-authored-by: jmackay2 <jmackay2@gmail.com >
2024-08-19 08:54:57 +02:00
e29a36adb4
Landing horizontal velocity compensation / unsteady landing ( #23546 )
...
* initial working
* implemented feedback
2024-08-19 08:01:43 +02:00
435e9665b3
RTL: cone: never climb more than to RTL_RETURN_ALT ( #23558 )
...
This is to prevent that a large NAV_ACC_RAD leads to very high return altitudes.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2024-08-19 07:51:33 +02:00
ea0ef154d8
Fixes upload.sh for arkv6x ( #23561 )
2024-08-17 13:59:18 -06:00
ad1d9e1312
failsafe: do not add additional hold delay if failsafe action is hold
2024-08-16 16:26:20 +02:00
ea673b0b5b
navigator: check hagl failsafe centrally
2024-08-16 16:26:20 +02:00
4f66410d24
ROMFS gazebo iris opt flow: increase SENS_FLOW_MAXHGT to 15m ( #23557 )
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2024-08-16 15:58:36 +02:00
09638552b7
estimatorChecks: disable warning for imminent position failure if that is disabled ( #23556 )
...
COM_POS_FS_EPH can be set to -1, in which case the actual failure eph is INFINITY.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2024-08-16 13:57:37 +02:00
4a3cbecf01
Commander: only add *autopilot disengaged* to failsafe notifactions in special cases
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2024-08-16 11:04:37 +02:00
f7e6e1354a
commander: power check only keep error thresholds
2024-08-15 10:06:56 -04:00
2a124fd998
Add Bosch BMM350 magnetometer ( #23362 )
...
* Add Bosch BMM350 magnetometer
* BMM350 replace info messages with debug messages
* BMM350 update measurement interval
* BMM350 fix offsets, update based on review
* BMM350 Update default parameters to 50Hz
* Update OTP Word LSB check
* BMM350 fix styles and formatting
* BMM350 update error checks
2024-08-15 01:29:02 -08:00
af0129dab7
github: update bug report template
...
Removes unnecessary required fields
2024-08-14 19:56:49 -04:00
c8501cc1d0
boards: Support for 3DR Control Zero H7 OEM Rev G board
2024-08-14 19:52:42 -04:00
4ed3e9e210
navigator: add failure enum
2024-08-14 11:08:02 +02:00
25fcb3c913
comander: trigger failsafe when navigator reports failure
2024-08-14 11:08:02 +02:00
9f69e9ee6c
navigator: publish navigator_state
...
feedback to commander
2024-08-14 11:08:02 +02:00
1fa878ad88
navigator: add navigation state ID to every mode class
2024-08-14 11:08:02 +02:00
dec550dcb9
navigator: Change IF statement to SWITCH statement ( #23534 )
2024-08-14 09:40:36 +02:00
f3a8d05f8c
MPC_ACC_DECOUPLE - better description ( #23518 )
2024-08-14 12:18:14 +10:00
5121358e87
Makefile: Fix error message when cannot find target board
...
not $(MAKE) help|list_config_targets, we should use $(MAKE) list_config_targets
for the desired results.
2024-08-13 21:34:39 -04:00
a327b14cef
navigator: always fully initialize geofence msg
2024-08-13 21:33:36 -04:00
0459481cb4
icm40609d: Change FIFO count to samples instead of bytes
...
As the sensor can directly report the amount of samples in the fifo, use it to simplify the logic.
Also combine the fifo empty/fifo overflow checks for interrupt and polling modes.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2024-08-13 21:32:28 -04:00
cc4d5bd2a6
icm40609d: Add INTF register definition and disable I2C interface
...
Disable I2C to make sure that the sensor doesn't switch to that by accident
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2024-08-13 21:32:28 -04:00
fd062d0085
icm40609d: Clear interrupt status at FIFO reset
...
If DRDY signal is used, the interrupt status needs to be cleared at FIFO reset
in order to make DRDY go back inactive. Otherwise there won't be a falling edge
interrupt at the next sample.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2024-08-13 21:32:28 -04:00
Ramon Roche