43698 Commits

Author SHA1 Message Date
JaeyoungLim
05cd850ae3 Document vehicle attitude message 2024-04-16 16:44:56 +02:00
Eric Katzfey
94d496605a
Voxl new board specific module (voxl_save_cal_params) to save calibration parameters (#22993)
* Added Voxl board specific module to save calibration parameters in QGC format
2024-04-15 16:10:22 -04:00
Eric Katzfey
d908b68c78
lib/rc/dsm: update proto init to have reset incorporated as well (#22995)
* update voxl2-slpi spektrum_rc driver
2024-04-15 16:09:19 -04:00
Eric Katzfey
0f665f2772 Added high rate esc_status logging to the high rate logging category along with actuator_outputs_debug. Both of these
really help diagnosing odd flight behavior / crashes on VOXL2. Also changed the logger start commands in the VOXL2
standard and HITL startup scripts.
2024-04-15 16:07:07 -04:00
Daniel Agar
78bbb66568 delete SYS_MC_EST_GROUP
- introduce per module parameters (EKF2_EN, LPE_EN, ATT_EN)
 - add basic checks to prevent EKF2 + LPE running simultaneously
2024-04-15 16:06:08 -04:00
alexklimaj
1b1479a92b airframes: Droneblocks DEXI 5 2024-04-12 14:44:01 -04:00
alexklimaj
528ad1e87d boards: ARK Pi6X Initial Commit 2024-04-12 14:44:01 -04:00
Jacob Dahl
65cc153d47 remove LIS2MDL from COMMON_MAGNETOMETER 2024-04-12 14:43:20 -04:00
Jacob Dahl
8a8f481c29 remove PGA460 from COMMON_DISTANCE_SENSOR 2024-04-12 14:43:20 -04:00
Silvan Fuhrer
926e7878af RT: only chose mission RTL if mission is valid
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-11 13:47:17 +02:00
Silvan Fuhrer
5fab21d099 MissionBase: hasMissionLandStart should only return true if mission is valid
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-11 13:47:17 +02:00
Silvan Fuhrer
05672f343d TECS: check if integrator update is finit prior applying
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-11 10:42:59 +02:00
Silvan Fuhrer
974ead4015 FW position control: catapult/hand-launch: enable without launch detection
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-11 10:42:59 +02:00
Silvan Fuhrer
6fec452c4b FW position control: catapult/hand-launch: do not cut throttle if not landed
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-11 10:42:59 +02:00
Konrad
6a7555c005 mission_base: fix to set the end of mission item always, if the mission can't be properly loaded or started 2024-04-11 10:21:52 +02:00
alexklimaj
cc11e1fbbf drivers: broadcom AFBR fix close to ground false readings 2024-04-10 11:47:04 -04:00
Eric Katzfey
b544ea99d5 Enabled voxl2-slpi dsp_sbus driver in build 2024-04-10 11:07:24 -04:00
Eric Katzfey
f8df7d1621 Move Voxl from microdds client to uxrce dds client 2024-04-10 11:06:32 -04:00
Peter van der Perk
7bfad2502b Update NuttX 2024-04-10 11:04:07 -04:00
Hamish Willee
f9c65cd4c6
Vuepress removal /changes for vitepress (#22972)
* Vuepress removal /changes for vitepress

* generate_msg_docs.py - README is index in vitepress
2024-04-10 09:08:25 +10:00
Eric Katzfey
d8fabd11d0
Send mavlink manual control buttons field in manual control input topic (#22988)
Pass along button states from manual control mavlink message in new buttons field in manual control input topic
2024-04-09 12:35:42 -07:00
David Sidrane
a73df4752f px4_fmu-v6x:Add Holybro Pixhawk Jetson Baseboard ver 0x100 2024-04-09 11:27:29 -04:00
Alex Klimaj
297ddabe70
drivers: rc_input only publish if more than 0 rc channels filled (fixes GHST auto scan) 2024-04-09 11:19:41 -04:00
Silvan Fuhrer
64505b4b9c Mission params: update description of MIS_TKO_LAND_REQ
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-09 13:24:46 +02:00
Silvan Fuhrer
93ed910977 FeasibilityChecks: only require both or neither TO/LND when landed
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-09 13:24:46 +02:00
Silvan Fuhrer
9f799be855 Navigator: remove unused method
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-09 13:24:46 +02:00
bresch
5f61e3b785 ekf2: update change indicator 2024-04-05 22:26:03 -04:00
bresch
b79d3854e4 ekf2: remove option to continuously fuse mag declination
Declination fusion is only used when not observable (no global aiding).
2024-04-05 22:26:03 -04:00
bresch
dae246d7e2 ekf2: do not continuously use mag decl fusion when GNSS fusion is active
This prevents over-constraining the heading from mag fusion. An
incorrect mag yaw rotation can be absorbed as a declination error.
2024-04-05 22:26:03 -04:00
bresch
2f51db7284 ekf2: limit mag heading fusion to prevent heading overconfidence 2024-04-05 22:26:03 -04:00
bresch
51883fe5d4 ekf2: integrate mag heading into mag 3D 2024-04-05 22:26:03 -04:00
bresch
0c9e4013d2 ekf2: improve tilt leveling speed
Starting with no yaw uncertainty makes the tilt more observable when
using fake position fusion during the quasi-stationary alignment phase.
2024-04-05 22:26:03 -04:00
bresch
12fefbcfbd ekf2: use global definition of quaternion error 2024-04-05 22:26:03 -04:00
Noe S. Sanchez
3931379efe
msg: update VehicleCommand.msg MAV_CMD_DO_REPOSITION comment
Added missing MAV_CMD_DO_REPOSITION parameters, from MAVlink Docs.
2024-04-05 21:29:44 -04:00
Jacob Dahl
7fbbdc31e8
Memsic MMC5983MA magnetometer driver 2024-04-04 21:08:24 -04:00
henrykotze
de9f3a3268 gz-bridge: use correct prev_timestamp for dt calc
- with the addition of the navsat plugin in PR#22638, the callback would
reassign the previous timestamp used in the calculations of the
angular_velocity causing derivative type noise in the groundtruth
measurements
2024-04-04 12:09:06 -04:00
Eric Katzfey
0a867b5d1d
Serial: removed the validateBaudrate function from nuttx and posix platforms and just send out a warning it baudrate is non-standard (#22969)
- Fix some Qurt platform build issues uncovered when changing the posix version of SerialImpl
2024-04-04 12:07:46 -04:00
Peter van der Perk
047e900c2a px4io: Fix dependency problem caused by #22957 2024-04-04 09:10:09 -04:00
Hamish Willee
8ceeda730d
Jenkinsfile - dual-deploy uorb graph and failsafe to vitepress (#22943) 2024-04-03 11:14:30 +11:00
Eric Katzfey
4c2112f46b
boards/modalai/voxl2: added device specifier to gps start line 2024-04-02 19:12:21 -04:00
Matthias Grob
b87c5285e2 battery: weigh voltage based estimate more when it's low
This is a minimal change to make it harder to crash a
vehicle with an empty battery if the capacity was set wrong.

The disadvantage is that the state of charge estimate will
fluctuate more under load.

We need better documentation and improvements to the estimation.
2024-04-02 19:22:28 +02:00
Matthias Grob
8579175013 Build new IO firmware binaries 2024-04-02 11:59:56 -04:00
Matthias Grob
ef5569fab3 px4iofirmware: reuse existing disarmed logic for lockdown and should_always_enable_pwm
The existing disarmed logic already handles disabled outputs
it makes sense to reuse it and not have lockdown handled
differently resulting in unexpeced corner cases.
2024-04-02 11:59:56 -04:00
Matthias Grob
b714b5461b px4iofirmware: simplify lockdown logic 2024-04-02 11:59:56 -04:00
Matthias Grob
7f0ec2305c px4iofirmware: refactor to only have one PWM output code path
This removes the duplication with unexpected differences
and allows to consistently handle the output instead of
overriding the output for some specific cases which
leads to unexpected corner cases. E.g. disabled outputs
suddenly outputing PWM in lockdown.
2024-04-02 11:59:56 -04:00
Matthias Grob
ab1087906d px4io: remove special handling for HITL
In HITL the actuators should not be mapped
and they are in lockdown.

We should not reconfigure disarmed, min, max PWM values
without updating the actual output values because the IO
will consider the last outputs before the FMU was rebooted
with the configuration of the new boot. This can result
in spinning motors when switching to SIH.
2024-04-02 11:59:56 -04:00
Silvan Fuhrer
cf87cd27f5 logger: reduce interval of rtl_status logging
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-02 09:49:35 -04:00
Silvan Fuhrer
67fb70a65e logger: make logging of rtl_status not optional
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-02 09:49:35 -04:00
Peize-Liu
f7bc13dab0
boards: new hkust nxt-fc board support (#22961) 2024-04-02 09:49:10 -04:00
Eric Katzfey
8e61026511
Port CRSF RC driver to new Serial UART API (#22917)
* Added implementations of Rx Tx swap and single wire for new UART API needed by CRSF driver
* Added inverted mode to Serial interface API
2024-04-01 22:09:13 -04:00