- Fixes matplotlib version expression from ">=3.0.*" ro ">=3.0" which is the right syntax
Fixes issue #23329
Co-authored-by: lee wonwoo <leewonwoo@leeui-MacBookPro.local>
The argparse module has been builtin to Python since
Python 3.2, released in 2011 (see
https://docs.python.org/3/whatsnew/3.2.html). Further,
the argparse pip module has not been released or updated
since 2015, and lacks some of the features of the modern,
built-in argparse. Drop the pip installed version in
favor of the built-in version.
Signed-off-by: Chris Lalancette <clalancette@gmail.com>
Includes:
- Remove some of the outdated Python2 checks and compatibility.
- Try not catch all exceptions but only the expected ones. Otherwise,
this makes it really hard to debug if anything unexpected actually
goes wrong.
- Make use of fstrings.
- Make output slightly prettier.
Signed-off-by: Julian Oes <julian@oes.ch>
This adds a new protocol extension which allows to get the bootloader
version.
The bootloader version is different from the bootloader protocol
revision which has stabilized at 5 and is not easy to update unless a
bootloader is actually breaking the protocol. The reason being that both
the Python script as well as the uploader used in QGC will not attempt
to load firmware if they don't know the bootloader version, so it could
basically be considered a "breaking" protocol revision.
Signed-off-by: Julian Oes <julian@oes.ch>
If the STM32H7 fails to program or erase a full chunk of 256 bytes, the
ECC check will trigger a busfault when trying to read from it.
To speed up erasing and optimize wear, we read before erasing to check
if it actually needs erasing. That's when a busfault happens and the
erase time outs.
The workaround is to add an option to do a full erase without check.
Credit goes to:
https://github.com/ArduPilot/ardupilot/pull/22090
And the protocol option added to the bootloader is the same as for
ArduPilot, so compatible.
Signed-off-by: Julian Oes <julian@oes.ch>
- Added offset to Posix hrt time to account for synchronization with Qurt hrt time
- Added new Kconfig to configure synchronization of HRT timestamps on VOXL2
- Moved voxl2 libfc sensor library submodule from muorb module to boards directory
- Added check to make sure hrt_elapsed_time can never be negative
Previously uORB queue size was an awkward mix of runtime configurable (at advertise or IOCTL before allocate), but effectively static with all queue size settings (outside of test code) actually coming from the topic declaration (presently ORB_QUEUE_LENGTH in the .msg). This change finally resolves the inconsistency making the queue size fully static.
Additionally there were some corner cases that the muorb and orb communicator implementation were not correctly handling. This PR provides fixes for those issues. Also correctly sets remote queue lengths now based on the topic definitions.
* Made setting of uORB topic queue size in based on topic definition only
* Fixes to the ModalAI muorb implementation
* Removed libfc sensor from format checks
* msg/TransponderReport.msg ORB_QUEUE_LENGTH 8->16 (was set to higher in AdsbConflict.h
---------
Co-authored-by: Eric Katzfey <eric.katzfey@modalai.com>
Co-authored-by: Daniel Agar <daniel@agar.ca>
* Added Lawnmower airframe
* Update 5005_gz_lawnmower
Works all right
* Update 5005_gz_lawnmower
RDD_WHL_SPEED has new name: RDD_WHEEL_SPEED
* Update ROMFS/px4fmu_common/init.d-posix/airframes/5005_gz_lawnmower
Co-authored-by: Per Frivik <94360401+PerFrivik@users.noreply.github.com>
* Update ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt
Co-authored-by: Per Frivik <94360401+PerFrivik@users.noreply.github.com>
* Renamed 5005_gz_lawnmower to 4011_gz_lawnmower
also pulled latest GZ models hash
---------
Co-authored-by: Per Frivik <94360401+PerFrivik@users.noreply.github.com>
simulation gazebo: move the gazebo models to submodule, allow for operation with external gazebo instance, independent of startup order. Allows drag an drop of models from gazebo fuel.
* rolled back updates
Signed-off-by: frederik <frederik@auterion.com>
* fixing empy
Signed-off-by: frederik <frederik@auterion.com>
* Update GZBridge.cpp to lower drop position
Dropping from 1m leads to movement in the rc_cessna. Dropping from 0.5m leads to no movement.
* Update STANDALONE env variable.
* Update STANDALONE env_variable on GZBridge
* Update src/modules/simulation/gz_bridge/GZBridge.cpp
Co-authored-by: Daniel Agar <daniel@agar.ca>
* test removal of x500
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
* removed all models and reworked logic
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
* remove model path in set_sdf_filename
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
* filter resource path for world sdf
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
* updated structure to keep old make px4_sitl
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
* remove gz tools
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
* import gz as submodule and reverse rc simulator logic
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
* [gz-sim]: source GZ_SIM_RESOURCE_PATH only if PX4 starts gz server
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@gmail.com>
* Typo fix
---------
Signed-off-by: frederik <frederik@auterion.com>
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@gmail.com>
Co-authored-by: Daniel Agar <daniel@agar.ca>
Co-authored-by: Beniamino Pozzan <beniamino.pozzan@gmail.com>
* events: pass relative paths plus base path to source parser script
to work around maximum Makefile command lenght limits.
* events: correct cmake comment typo
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
---------
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Benjamin Perseghetti