benjinne
620f25503c
Add geofence predict param ( #17795 )
2022-03-18 11:44:13 +01:00
Daniel Agar
36e6527013
ROMFS: MAV_TYPE cleanup
...
- set MAV_TYPE as a parameter default per vehicle type, or airframe if necessary
- cleanup MAV_TYPE param metadata and commander helper to only include
what's currently used in PX4
2022-03-17 09:28:10 -04:00
Jukka Laitinen
3d35929f3e
Put gyro_fft in kernel by default in protected build
...
It is a performance issue to run it on user side
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2022-03-17 08:01:51 +01:00
Jukka Laitinen
d167f91eb8
logger/watchdog: Disable watchdog for NuttX protected/kernel builds
...
It accesses kernel internal structures directly; this needs to be
worked out with some proper userspace-kernel interface
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2022-03-17 08:01:51 +01:00
bresch
f3f09c1344
PreFlightCheck: add data timeout detection for mag, baro accel and gyro
2022-03-16 11:46:01 +01:00
bresch
75aa11c955
PreFlightCheck: refactor sensors preflight checks
2022-03-16 11:46:01 +01:00
bresch
b1c1163ee4
PreFlightCheck: remove unused device_id argument
2022-03-16 11:46:01 +01:00
bresch
5f1b577b6d
PreFlightCheck: mark sensor required if used by an EKF2 instance
2022-03-16 11:46:01 +01:00
stmoon
6d0b11ca99
add custom target for uorb_sources_microcdr_gen
2022-03-15 17:59:22 -04:00
KonradRudin
5f43be9d60
preflight checks: add check for distance sensor (via parameter)
2022-03-15 10:44:27 +01:00
Daniel Agar
7ef38112d2
ekf2: return saved mag bias variance when not in 3d magnetometer fusion
...
- the estimated mag bias was requiring > 30 seconds of continuous 3d
mag fusion to be reported stable (and saved back to mag cal), this
restores the original intent requiring 30 seconds of accumulated valid
3d mag fusion
2022-03-14 21:03:41 -04:00
Daniel Agar
5717434e93
ekf2: initialize GPS drift metrics to NAN rather than 0
2022-03-14 10:09:24 -04:00
alessandro
62d1058cc2
log irlock_report and landing_target_pose messages
...
Need to log both, because on some systems the
information will come in directly as a
landing_target_pose message, and on others
it's coming in as irlock_report and then filtered
in PX4 to produce the landing_target_pose message.
2022-03-14 10:13:08 +01:00
Matthias Grob
f1e44c6e2a
PreFlightCheck: only allow modes suitable for takeoff
2022-03-14 09:03:39 +01:00
Daniel Agar
a430f0ccae
ekf2: add simple zero velocity update when vehicle at rest ( #19149 )
...
- further decreases initial tilt alignment time (now down to 2.5 seconds if still) and improves initial bias estimates
2022-03-12 12:56:31 -05:00
Daniel Agar
3d54d25867
sensor calibration delete temperature (CAL_ACCx_TEMP, CAL_GYROx_TEMP, CAL_MAGx_TEMP)
...
- this was an experiment to casually monitor sensor offsets relative to temperature, but now that all calibration offsets can be adjusted post-flight the stored temperature can be misleading
- deleting to save a little bit of flash (and storing the temperature wasn't useful)
2022-03-12 11:38:49 -05:00
wangwwno1
aa64789792
sensors/vehicle_imu: Fix Integration Rate greater than Gyro Rate ( #19318 )
2022-03-12 11:29:23 -05:00
RomanBapst
58a4c38519
rtl: don't fly mission landing if we trigger rtl in hover
...
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2022-03-11 15:23:31 +03:00
Silvan Fuhrer
f4c300af25
FlightTaskAuto: Nudging: only set yawrate_sp if WV is disabled or stick out of dead-zone
...
Otherwise the setpoint from weather vane is constantly overwritten by it,
even if the yaw stick is not moved.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2022-03-11 09:18:31 +01:00
Alex Klimaj
71850eeda6
mavlink: Add flow control parameters ( #19254 )
2022-03-10 08:22:00 -08:00
Roman Bapst
69560bd4f4
Compensate VTOL transition time for air density ( #19293 )
...
* vtol: compensate front transition minimum time and front transiton openloop time
for air density
Signed-off-by: RomanBapst <bapstroman@gmail.com >
2022-03-09 08:41:30 -05:00
bresch
182980526f
commander: allow rearming grace period for arming switch only
2022-03-09 08:42:21 +01:00
wangwwno1
cd5a1e510a
ekf2: typo Fix: pub.advertised() -> pub.advertise() ( #19302 )
2022-03-09 08:39:08 +01:00
Daniel Agar
b7e0f17c6a
ekf2: minor position/velocity reset cleanup
...
- try to use avoid resetVelocity() call where possible
- reset timeouts centrally
2022-03-08 11:16:35 -05:00
Daniel Agar
c10ea97967
ekf2: fusion helpers return success/fail and set pos/vel update timestamps centrally (if healthy)
2022-03-08 11:16:35 -05:00
Matthias Grob
68a0414622
Quaternion: rename function to rotate vectors
2022-03-07 20:03:54 -05:00
Matthias Grob
666cf2326d
mission_block: handle SET_ROI_LOCATION with absolute altitude correctly ( #19258 )
2022-03-03 13:25:00 +01:00
Daniel Agar
6224e11463
Update world_magnetic_model to latest Sat Feb 26 16:47:08 UTC 2022 ( #19262 )
...
* Update world_magnetic_model to latest Sat Feb 26 16:47:08 UTC 2022
* [AUTO COMMIT] update change indication
Co-authored-by: PX4 BuildBot <bot@px4.io >
2022-02-26 15:39:37 -05:00
PX4 BuildBot
d94ad5bd6d
Update submodule mavlink to latest Sat Feb 26 16:47:38 UTC 2022
...
- mavlink in PX4/Firmware (95358ae501e92687b00d2786bc8eadf28ff93930): https://github.com/mavlink/mavlink/commit/4ee1eebbd173a3a483b79088b58fef6ec0a4dfef
- mavlink current upstream: https://github.com/mavlink/mavlink/commit/b568a60fca42599d9998434e606f6e38e0b5e298
- Changes: https://github.com/mavlink/mavlink/compare/4ee1eebbd173a3a483b79088b58fef6ec0a4dfef...b568a60fca42599d9998434e606f6e38e0b5e298
b568a60f 2022-02-24 Hamish Willee - Update pymavlink to latest (#1805 )
b86834e0 2022-02-23 Hamish Willee - Component info - tidy descriptiosn (#1803 )
79e9545a 2022-02-23 Hamish Willee - Remove external dialect doc and improve dialect pages (#1802 )
fd7ccfbe 2022-02-23 Hamish Willee - MAV_PROTOCOL_CAPABILITY_FLIGHT_TERMINATION - improve linking to command (#1774 )
2b7de26c 2022-02-23 Hamish Willee - [Discuss.] MAV_PROTOCOL_CAPABILITY_FTP - supports FTP protocol not specific message (#1772 )
a7541658 2022-02-18 Alessandro Ros - fix common.xml include in AVSSUAS (#1800 )
5b4482fe 2022-02-17 Hamish Willee - RFC 0016 - Mavlink Standard Modes - Add to development.xml
2022-02-26 15:07:42 -05:00
Beat Küng
ddad4c31c9
control_allocator: compute thrust scaling individually per axis
...
Before, adding the pusher to the same matrix as the upwards motors affected
the scaling for the upwards motors, resulting in values not equal to -1
anymore.
2022-02-25 08:30:58 +01:00
Beat Küng
76d8d8cae6
control_allocator: generic motor configuration for standard vtols
...
This adds the pusher/puller to the standard motors and makes the axis
configurable.
2022-02-25 08:30:58 +01:00
Beat Küng
b2dc9ee710
control_allocator: add title & help url to geometry UI
2022-02-25 08:30:58 +01:00
Beat Küng
cbcae260e4
mavlink: update submodule
2022-02-25 08:30:58 +01:00
Beat Küng
9b629a9e95
hitl,sitl,sih: use separate actuator_outputs_sim for SYS_CTRL_ALLOC==1
...
- removes the need to do type-specific rescaling of pwm to normalized values
- allows to run physical output drivers alongside HIL/SIH
2022-02-25 08:30:58 +01:00
Charles Cross
1e32398217
Adds scheduling call to ControlAllocator initialization
2022-02-25 08:16:08 +01:00
Charles Cross
aecfbef128
Enables 20Hz backup scheduling for ControlAllocator
2022-02-25 08:16:08 +01:00
Charles Cross
51c055832f
Changes ControlAllocator to always publish actuator controls and status
2022-02-25 08:16:08 +01:00
Daniel Agar
8de2c80b34
mavlink: SCALED_IMU streams add temperature
...
- preference for accel or gyro temperature before mag
2022-02-23 14:05:31 -05:00
Daniel Agar
11f617ca9b
ekf2: default to in air and not at rest
...
- this is a more conservative default if a vehicle isn't set (no land detector running)
- handled horizontal preflight failures in commander when disarmed
rather than overloading xy_valid and v_xy_valid flags
- ekf2 no longer depend on arming or standby status
2022-02-22 16:59:10 -05:00
Daniel Agar
d6d529539d
ekf2: consolidate and simplify gnd effect logic
2022-02-22 16:59:10 -05:00
Daniel Agar
1d7791dad6
commander: monitor GPS validity and EKF2 dead reckoning
...
- ekf2: expose dead reckoning as control status flags
- commander:
- add GPS validity check
- in AUTO MISSION if dependent on GPS then a loss of GPS will
2022-02-22 09:46:21 -05:00
Julian Oes
6021b8efb3
navigator: only apply breaking for multirotors
2022-02-22 09:41:22 -05:00
Julian Oes
fa6c051ae5
navigator: break smoothly when entering hold mode
...
This uses the existing breaking functionality when hold/loiter mode is
activated.
2022-02-22 09:41:22 -05:00
Julian Oes
f88dd28e85
navigator: extract breaking functionality out
...
This only moves the breaking functionality out from the reposition
command handling to a function, so that it can get re-used in other
places.
2022-02-22 09:41:22 -05:00
bresch
0e0e0d8be7
[AUTO COMMIT] update change indication
2022-02-22 11:49:25 +01:00
bresch
4f0a959244
gps_hgt: add and improve unit tests
2022-02-22 11:49:25 +01:00
bresch
edabfd2f0e
ekf_hgt: call specific height reset function instead of generic one
...
- Also use the delayed current data instead of newest that might not be
available (gps buffer is sometimes empty if the dt between samples is
larger than the delayed horizon).
- Separate "baro fault" from "baro intermittent": intermittent is a
temporary failure and should prevent from switching to baro right now,
but "fault" means that it should never be used anymore
- In case of height timeout, check for metrics but not for consistency
as the filter is likely to have diverged already.
2022-02-22 11:49:25 +01:00
bresch
cba73585e1
use recorded last sensor timestamp for intermittent check
2022-02-22 11:49:25 +01:00
Daniel Agar
f431b233f3
ekf2: preflight checker fix flow y innovation filter
2022-02-22 09:39:22 +01:00
Roman Dvořák
976c994156
Extend the PCF8583 driver to support multiple instances ( #19232 )
...
* Add some restart events into pcf8583 driver
Co-authored-by: Vít Hanousek <vithanousek@seznam.cz >
2022-02-21 16:47:16 -05:00