fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-05-02 05:04:08 +08:00
Code Issues Packages Projects Releases Wiki Activity
35,366 Commits 852 Branches 161 Tags
Commit Graph

103 Commits

Author SHA1 Message Date
David Sidrane
50d3af1ba1 mro_ctrl-zero-f7: Initalize PWM as input with Pull Downs 2021-05-05 20:48:06 +02:00
Daniel Agar
58b40fbbb9 boards: move testing to dedicated test variants 2021-04-14 09:21:31 +02:00
Daniel Agar
6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar
631d1647d3 boards: minimize unnecessary differences in default variants 2021-03-28 14:46:47 -04:00
Ryan Johnston
bffa83bd47 Reverting LAZYFPU for v1.12 beta1 Compatibility 
Without reverting this a constant boot loop occurs.

Prior to merging, why this occurs on some F7 boards and not this one should be looked at.

With LazyFPU enabled, v1.12.0 beta1 will not boot but without it removed it works fine.
 2021-03-17 06:10:02 +01:00
Daniel Agar
2257c3767e simple gyro auto calibration module 2021-03-15 09:46:47 +01:00
Daniel Agar
4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Ryan Johnston
9d0a8928bd Update chip type 
Update chip type from NI to II.
 2021-03-05 21:28:36 +01:00
Daniel Agar
19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Ryan Johnston
bc8d9af23e Add Lazy FPU 
Reported that LAZYFPU  interact with the MTD (FRAM) driver.

https://github.com/PX4/PX4-Autopilot/issues/16548
 2021-03-03 14:43:40 -05:00
Beat Küng
7e33d03470 drivers: remove tap_esc 
- it's not used anymore
- it would need a refactoring to use mixer_module
 2021-02-25 09:28:37 -05:00
Daniel Agar
414f9f81d9
move fake GPS to standalone module 2021-02-20 14:13:36 -05:00
Daniel Agar
ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar
fb2a199621 delete unmaintaned mkblctrl driver 2021-02-14 10:38:15 +01:00
Daniel Agar
a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar
8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar
a2442ffb48 board: enable UAVCAN sensors by default on F7/H7 2021-02-02 09:01:12 +01:00
Ryan Johnston
d22eef9396
boards: mRo Control Zero F7 fix for voltage/current sensing 
* Rename GPIO_nVDD_BRICK1v to GPIO_VDD_BRICK1
 2021-01-19 15:48:17 -05:00
Ryan Johnston
cea8ad4236 Control Zero F7 - RSSI Fix - SBUS Only/PPM Partial 
This fixes RSSI for the Control Zero F7 but I have noticed that while this works perfectly for SBUS receivers, for PPM receivers it does not decrease the RSSI visual value in QGC when removing the RC transmitter connection.

When a PPM receiver is connected and the connection is lost the autopilot goes into RC Scan Mode (in the RC Update Module) to determine what is connected (even though something already is connected).

The main issue with this is that PPM receivers don't go into RC Failsafe but I don't think it is an issue with this autopilot. It looks to be an issue with the RC Update Module and how it is handled at the module level for non I/O coprocessor autopilots. 


Tested with an X8R (SBUS) and a Dragonlink (PPM) as well as a Dragonlink set to SBUS as the output. SBUS worked as intended. See screenshots below.
 2021-01-19 20:42:28 +01:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar
7f5fae91b0 boards: mro ctrl zero f7 fix default power module calibration 2021-01-12 16:51:05 -05:00
Daniel Agar
cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar
763c3b8fda boards: start enabling multi-EKF by default on F7/H7 2021-01-10 17:56:34 +01:00
Matthias Grob
7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane
22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane
5703070974 mro_ctrl-zero-f7: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar
c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar
233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Daniel Agar
1bf0218c87 boards: mRo Control Zero F7 fix RC input and cleanup sensors init 2020-10-04 22:23:47 -04:00
Tanja Baumann
b5ebdb8e41
add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane
1e55ce0839 mro_ctrl-zero-f7: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane
2550d6f7c1 mro_ctrl-zero-f7 Updates for NuttX 9.1.0- 
mro_ctrl-zero-f7: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane
e8e463b875 cubepilot_cubeyellow Updates for NuttX 9.1.0- 
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar
2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar
e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar
13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
Daniel Agar
6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar
5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar
d1c12ac7cf boards: mRo Control Zero fix IMU rotations 2020-06-04 11:34:31 -04:00
Daniel Agar
951969ba00
drivers/imu/invensense: new ICM20948 driver on SPI with AK09916 mag 2020-05-22 00:09:30 -04:00
Daniel Agar
746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar
28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar
8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar
06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder
6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar
66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar
a89bba470a boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling 
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
 2020-04-08 13:20:54 -04:00
Daniel Agar
7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar
ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00