853047c643
Mantis: use gimbal auto input
...
This allows RC and mavlink gimbal v2 input.
2022-02-07 19:21:15 -05:00
39f0e97245
vmount: refactor for v2 auto input, test command
...
This is a bigger refactor of vmount to clean it up and plug some holes
in functionality.
The changes include:
- Fixing/simplifying the test command.
- Changing the dependencies of the input and output classes to just the
parameter list.
- Adding a separate topic to publish gimbal v1 commands to avoid
polluting the vehicle_command topic.
- Removing outdated comments and author lists.
- Extracting the gimbal v2 "in control" notion outside into control_data
rather than only the v2 input.
2022-02-07 19:21:15 -05:00
f2216dff55
mavlink: don't send gimbal_device_attitude_status
...
If we receive gimbal_device_attitude_status by mavlink we should not
re-send it as we are already supposed to be forwarding mavlink traffic
from the gimbal to the ground station.
2022-02-07 19:21:15 -05:00
7e7a99b542
mavlink: handle for GIMBAL_DEVICE_ATTITUDE_STATUS
...
That way we can log it later.
2022-02-07 19:21:15 -05:00
f9d87fd97a
sensors/vehicle_angular_velocity: improve error handling (especially during initial selection)
2022-02-07 12:47:02 -05:00
b4087ebd2b
mc_pos_control: increase the default crawl speed for three-stage-landing approach for a more robust landing detection
2022-02-04 21:56:20 -05:00
4ef8cead3d
mc_pos_control_params: correct crawl speed reference
2022-02-04 21:56:20 -05:00
1df9d6fca6
MulticopterLandDetector: fix crawl speed parameter fetching
2022-02-04 21:56:20 -05:00
fb8b9b647a
land-detector: switch to crawl speed for intent detection
2022-02-04 21:56:20 -05:00
2a6d9bc1dd
fligh-mode-manager: First implementation of a three-stage-landing for multirotos, in case LIDAR is available
2022-02-04 21:56:20 -05:00
893cdf8f38
ekf2: test external vision adjustments after lowering fake position fusion variance
2022-02-04 21:48:32 -05:00
6b1750d8be
ekf2: lower fake position observation variance when at rest
2022-02-04 21:48:32 -05:00
c028b964e2
bmm150: minor changes to match reference driver
2022-02-04 19:57:24 -05:00
8b2016b4ed
fix protocol_splitter: increment i properly in scan_for_packets
...
This also guarantees that i is increased in every loop iteration.
Before it was possible to enter a busy loop.
2022-02-04 09:42:52 -05:00
cf3db0d313
mavlink: don't send_mission_current if mission invalid
2022-02-04 09:40:25 -05:00
26dba1407b
Commander: VTOL quadchuate also triggers a RTL in Loiter and VTOL_Takeoff modes, not just in Mission ( #19123 )
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2022-02-03 14:18:28 +01:00
f82c722653
Publish correct orbit status with goto ( #19102 )
...
For fixedwings, the orbit status was publishing zero radius when a goto waypoint was being passed.
This commit corrects this by passing the default loiter radius as the guidance logic was using
2022-02-03 10:16:39 +01:00
917910f3e2
ekf: pass a float by copy instead of a constant ref
2022-02-02 17:43:25 -05:00
3077f27821
ekf: use float instead of Vector2f for innov gate in pos/vel fusion
...
We always use the same innovation gate for X and Y anyway
2022-02-02 17:43:25 -05:00
5fb0084524
ekf2: remove unused shared fields for last velocity observation and variance
2022-02-02 17:43:25 -05:00
8a0581516c
ekf2: don't store _auxvel_sample_delayed
2022-02-02 17:43:25 -05:00
452b5e94b4
ekf2: don't store _drag_sample_delayed
2022-02-02 17:43:25 -05:00
138ff7a316
sensors: ensure that best accel/gyro is in bounds
2022-02-02 17:14:46 -05:00
07c273fc31
sensors/vehicle_angular_velocity: print full sensor_selection if device id not found
2022-02-02 17:14:46 -05:00
2fc95bb369
Rebase fix
...
Use getnavspeed_2d for groundspeed
2022-02-02 17:16:19 +01:00
3a9c5c3178
Use acceleration to pass path curvature
2022-02-02 17:16:19 +01:00
e2741f988a
Add interface for passing path tangent and closest point directly
...
This commit adds an interface to pass the path tangent and closest point directly to NPFG using the offboard interface
2022-02-02 17:16:19 +01:00
f460611098
Fix serial_test stack warning
2022-02-02 11:12:53 -05:00
efd3bc1794
Serial_test move g_cl and g_mod from heap to stack to save memory by not preallocating them
2022-02-02 07:21:43 -08:00
88ffc177f7
ekf2: utils add getEulerYaw() that uses the best rotation sequence
2022-02-02 08:54:03 -05:00
c3e0b93fc8
ekf2: remove unnecessary inlines
2022-02-02 08:50:49 -05:00
26d5ac4f58
GPS_YAW_OFFSET param docs: use rover and moving base terminology
2022-02-02 07:39:01 +01:00
3358712b92
UAVCAN Node Correct C to Kelvin conversion
2022-02-01 21:49:29 -05:00
48c32f7795
Added serial passthru
...
This addes the command serial_passthru which will pass data from one
device to another. This can be used to use u-center connected to USB
with a GPS on a serial port.
Usage: serial_passthru [arguments...]
-e <val> External device path
values: <file:dev>
-d <val> Internal device path
values: <file:dev>
[-b <val>] Baudrate
default: 115200
[-t] Track the External devices baudrate on internal device
With the -t option baudrate changes made on the PC connected to the USB
will be set to the intrenal device.
2022-02-01 21:49:29 -05:00
f3e2a197ad
move vehicle at rest detection ekf2 -> land_detector
...
- move vehicle at reset detection ekf2 -> land_detector
- ekf_unit: reduce init period
- Fake fusion is when at rest is quite strong and makes the variance reduce rapidly. Reduce the amount of time we wait before checking if the variances are still large enough.
- ekf_unit: reduce minimum vel/pos variance required after init
- Fake pos fusion has a low observation noise, making the vel/pos variances reduce quickly.
Co-authored-by:: bresch <brescianimathieu@gmail.com >
2022-02-01 17:50:19 -05:00
e387f302f9
mavlink: streams/COMMAND_LONG don't send internal vehicle_commands
2022-02-01 09:15:10 -05:00
f8a090e85e
Remove HYGROMETERS from fmu-v5 stackcheck build and rename to COMMON_HYGROMETERS
...
The stackcheck build flash space overflows after adding hygrometers.
Also follow the naming convention of other similar config flags, and rename the
config.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2022-02-01 08:56:25 -05:00
a4206ba553
logger: log excluded optional topics
...
Can be displayed with:
ulog_info <file> -m excluded_optional_topics
2022-02-01 08:40:02 +01:00
2b1229786e
Multi instance SHT3x driver support
2022-01-31 21:38:26 -05:00
ed475ca324
SHT3x driver
...
SHT3x driver, clean code
changes leading to merge TFHT with CUAV hygrometer
Delete humidity_temperature.msg
Update CMakeLists.txt
rename 'atmosphefir_quantities' to 'hygrometers'
fix logging
removed cmake files
fix PR issues
2022-01-31 21:38:26 -05:00
e554f0174d
Format whitespace and group checkall() methods together in geofence class.
2022-01-31 21:01:03 -05:00
ae0bb8371d
Commander: message planned battery action with warning together
2022-01-31 20:27:06 -05:00
973116c7a4
commander_params: clarify failsafe delay procedure description
2022-01-31 20:27:06 -05:00
cd560da57c
Commander: correct battery failsafe message severity level
2022-01-31 20:27:06 -05:00
405852b5c8
Commander: only disallow RC override during battery failsafe delay
2022-01-31 20:27:06 -05:00
5ec21835a4
Commander: ensure low battery failsafe flying unatended without GPS
2022-01-31 20:27:06 -05:00
1911ec0085
Commander: fix user messageing for low battery failsafe delay
2022-01-31 20:27:06 -05:00
52a9040c62
BatterySimulator: recharge battery upon disarming
2022-01-31 20:27:06 -05:00
955aad0dfb
Commander: consistent hysteresis initialization
2022-01-31 20:27:06 -05:00
d10f9030ad
Commander: add delay before executing low battery failsafe action
2022-01-31 20:27:06 -05:00
Julian Oes