fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-15 07:23:35 +08:00
Code Issues Packages Projects Releases Wiki Activity
48,275 Commits 852 Branches 161 Tags
copilot/fix-stack-buffer-overflow
Commit Graph
57 Commits
Author SHA1 Message Date
Matthias Grob f6de211a27 boards: skip resetting INA parameters to the same default value 2025-11-27 15:16:50 +01:00
Alexander Lerach e8fbc30cf6 boards: add auterion v6x target 2025-10-14 19:14:41 +02:00
Niklas Hauser cc199aa807 [board] Disable buzzer on Skynode base boards 2025-05-21 17:43:12 +02:00
Julian Oes 36bfcf5ec2 boards: keep INA238 shunt value for Skynode 
This is an attempt to keep backwards compatible with Auterion's power
monitor which uses a shunt value of 0.0003 and not 0.0005.
 2025-05-15 11:04:21 +12:00
Julian Oes fd2b3aeec8 fmu-v6x: disable external baro ms5611 (#23650) 
Otherwise, this will conflict with the MS5525DSO airspeed sensor.
 2024-10-11 11:04:15 +13:00
Niklas Hauser cd231d0eed fmuv6x: Add GPIO expander to check overcurrent pins 2024-08-08 13:14:11 -04:00
Beat Küng a90cdcfe80 boards/px4/fmu-v{5,6}x: enable uxrce_dds_client on ethernet by default 2024-06-10 11:05:50 +02:00
Beat Küng 2524ac8c2b boards/px4/fmu-v{5,6}x: do not enable mavlink on ethernet for skynode 2024-06-10 11:05:50 +02:00
Niklas Hauser 0186d687b2 Add minimal Skynode RC13 config to the PAB manifest 2024-03-04 13:33:20 -05:00
fury1895 3de7d83e5f v6x board_sensors: publish system_power if ADC_ADS1115_EN is enabled 2024-02-08 16:11:34 +01:00
Vincent Poon 6dbb798e37 Change FMU-v6x REV 6 IMU Order 
Change IMU Order, make adis16470 in 1st priority.
 2024-02-02 05:49:21 -05:00
David Sidrane c07edd1d9a px4_fmu-v6x:Add Sensor set 8 2024-02-01 21:11:32 -05:00
David Sidrane 84dddb5f40 px4_fmu-v6x:rc.board_sensors Use BOARD_HAS_HW_SPLIT_VERSIONING 2024-01-30 11:15:03 -05:00
David Sidrane 987d97d600 px4_fmu-v6x:HAVE_PM2 set by PX4_MFT_PM2 in manifest 2024-01-30 11:15:03 -05:00
David Sidrane 3057f7607f px4_fmu-v6x:Use hwbasecmp 2024-01-30 11:15:03 -05:00
Julian Oes 19964d56ed fmu-6x: Use i2c_launcher by default 
This switches all SENS_EN_INAXXX params to 0 by default and instead uses
the i2c_launcher command.

However, if any one the SENS_EN_INAXXX param is set, it no longer tries
to auto-configure it.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-22 22:19:52 -05:00
Julian Oes fbc95ff4bd Add I2C driver launcher 
This is just a first draft of the launcher part.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-22 22:19:52 -05:00
Julian Oes 19b681ca1f Remove SYS_USE_IO param 
The param is not really required anymore with the actuator
configuration. Also, when it is set to 0, RC doesn't work for some
boards which would be nice to avoid.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-11-10 12:17:23 +13:00
David Sidrane 96ee73f295 px4_fmu-v6x:Rev 6 Sensors omit starting icm42688p, icm42670p, icm20649, icm20602 2023-10-18 20:55:46 -04:00
Daniel Mesham e00b35e142 boards: default to custom participant for uXRCE-DDS client on Skynode 2023-10-05 08:03:21 +02:00
Niklas Hauser 43d859313b px4/fmu-v5/6x: Upstream power manager for FMU 
Detects and configures it correctly for the Auterion INA226-based power
modules.
 2023-09-27 10:39:31 -04:00
David Sidrane 9151d582ed px4_fmu-v6:Add Sensor Set Rev 6 2023-09-21 16:22:44 -04:00
Julian Oes f2bb548b27 6x: fix internal mag rotation 
From looking at the history the BMM150 rotation was initially 0. Then,
this was changed to 6 when the intent was to only change it for Skynode.

A bit later, the rotation was changed back to 0, but only for Skynode.

This tells me that rotation 0 was correct for all 6X including Skynode
all along.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-09-11 15:03:33 +12:00
Beat Küng bae413a332 v6x: start mavlink on TELEM2 for skynode 
Equivalent to v5x
 2023-07-03 16:20:41 +02:00
Marco Räth bdb0fe77d0 v6x: fix mag orientation for V6X009010 and V6X010010 (#21194) 2023-02-28 11:01:16 +01:00
Tanja Baumann 0099523710 v6x: fix IMU rotations for V6X009010 and V6X010010 (#20901) 
And add V6X000010 (pixhawk base board)
 2023-01-13 14:09:35 +01:00
tanja e5255b173a v6x: use param SENS_INT_BARO_EN to start internal bmp388 2022-12-19 08:50:31 +01:00
tanja 987de56af2 v6x: rev10 has second PM 2022-12-19 08:50:31 +01:00
Tanja Baumann d75e61eef6 v6x: fix rc.board_sensors ver command (#20763) 2022-12-14 07:53:12 +01:00
tanja ed0f602ce8 v6x: Adapt sensor set for board 0x010 upstream 2022-12-13 08:09:15 +01:00
David Sidrane e284d4aa52 fmu-v6x:CUAV HW Version changes 2022-09-22 11:36:16 -04:00
CUAVmengxiao 9493008dbb px4_fmu-v6X: add CUAV board 2022-09-22 11:36:16 -04:00
Daniel Agar cac9c51ac8 ROMFS: purge old mixing system 
- SYS_USE_IO is now off by default (enabled by default per board)
 2022-09-09 09:14:09 -04:00
vincentpoont2 4fe90322db update fmu-v6x rc.board_sensors, add V6X004003 2022-09-08 20:54:19 -04:00
Vincentpoont2 b16a53018d Add Holybro Pixhawk Pi CM4 Baseboard Support 2022-09-08 20:54:19 -04:00
Igor MišićandDavid Sidrane 4b503c310e Merge PR #19575 (changes to pr-extendend_hw_ver_rev_format) 
- 4096 of 3 hex digits each for rev and ver is enough.
    #defines used in SPI versions do not be long format, use use the macro
 - Board provides a prefix and the formatting is sized and built in
 - No need for funky board_get_base_eeprom_mtd_manifest interface
    Original mft is used where the abstraction is done with the MFT interface

Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
 2022-07-05 09:29:26 +02:00
Igor Mišić ec1614d156 boards: update id string from V5X{0-a}{0-a} to V5X{xxxx}{xxxx} 
boards: new format for hwtypecmp string
boards: update manifest.c to follow the new hw_ver_rev format
 2022-07-05 09:29:26 +02:00
David Sidrane f15eb91814 px4_fmu-v6x:HB Mini add Ver 3, Ver 4 init 2022-06-10 04:20:26 -07:00
David Sidrane 74a2930315 px4_fmu-v6X:Added Holybro mini base board 2022-05-27 15:02:28 -04:00
David Sidrane 2bdeb36ea3 px4_fmu-v6x:Add Rev 4 Sensors 2022-05-20 15:52:32 -04:00
David Sidrane 9fe2dfc2e3 px4_fmuv-6x Sensor set 3 2022-03-23 12:24:31 -04:00
Daniel Agar 9b7c8c8a8b boards: px4_fmu-v6x_default enable ethernet by default with NuttX optimizations 2021-11-29 09:08:42 -05:00
Daniel Agar 6d78054f50 mavlink USB auto start/stop on boards with VBUS 
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
 2021-10-03 15:32:54 -04:00
Thomas Debrunner 43ece74fa0 ina238: Do not expose raw adc config to user, make specific to ina238 2021-09-22 10:02:17 +02:00
Thomas Debrunner b8d0bb44c4 ina23X: Support for ina23X power monitors 2021-09-22 10:02:17 +02:00
David Sidrane 1339dd3681 px4_fmuv6x:Use parameter setting for ina22x 2021-08-22 14:48:01 -04:00
David Sidrane 566d1499bc px4_fmu-v6x:Use HB 10pin GPS rotation 2021-08-20 10:15:57 -04:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Nico van Duijn 16af63e99c v6x: fix icm20649 rotation 2021-03-02 05:27:31 -08:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00