1985 Commits

Author SHA1 Message Date
Lorenz Meier
f41e5728fc Correct demixing scaling for v-tail mixers 2012-12-18 13:18:36 +01:00
Lorenz Meier
4c2862f6c0 Merged PWM fixes 2012-12-18 12:32:19 +01:00
px4dev
76895af6eb Fix several aspects of the PWM output driver; enable auto-reload, use named constants for various control bits, and use a more polite mechanism at disarm time to avoid runt pulses.
This may address an issue we've seen where we get occasional malformed PWM output pulses, possibly due to a race between compare updates and the timer.
2012-12-18 00:35:28 -08:00
px4dev
8d716dea45 Teach 'fake' to set the arming state as well.
Whitespace.
2012-12-18 00:33:33 -08:00
px4dev
b8044d9786 use <err.h> more consistently in the fmu driver. 2012-12-18 00:29:22 -08:00
px4dev
6d0bea0298 Fix the PWM servo ioctl base so it's not overlapping the GPIOs 2012-12-18 00:27:12 -08:00
Lorenz Meier
97a94e3b89 Fixed MAV_TYPE parameter readout 2012-12-16 16:31:17 +01:00
Lorenz Meier
df5c09ead1 Fixed MAVLink parameter initialization 2012-12-16 16:31:02 +01:00
Lorenz Meier
b9606d0d6e Reverted arming state machine back to its original state, operational again 2012-12-16 16:30:41 +01:00
Lorenz Meier
e56911bf2d Fixed signal loss detection on S.Bus parsing, stripped PX4IO code parts from S.Bus parser to allow FMU / IO parser code sharing. Added S.Bus channels 17 and 18 if channel data struct has enough space. Tested with receiver and PX4FMU. 2012-12-16 15:31:44 +01:00
Lorenz Meier
f81d00594c Made PX4IO FMU timeout based on IOs HRT, updating mixers now on every FMU update and not at fixed rate, this is WIP and currently does not support mixing with RC-only 2012-12-15 23:28:03 +01:00
Lorenz Meier
42ffb4161d Merge branch 'master' of github.com:PX4/Firmware into fixedwing_outdoor 2012-12-15 21:24:47 +01:00
Lorenz Meier
f40e4d13aa Merge pull request #101 from julianoes/hotfix_matlab_import_script
Greatly sped up Matlab import script
2012-12-15 01:38:51 -08:00
Julian Oes
4bc3f80043 Greatly sped up Matlab import script, a 17min flight now takes 2secs to import instead of more than the actual flight time 2012-12-15 00:01:59 -08:00
Lorenz Meier
1fc0a6546e Merged IO feature branch 2012-12-13 11:12:34 +01:00
Lorenz Meier
03076a72ca Added required additional fields: If system is ok to launch (required for LED indicator), if system is ok to override fully by RC (required for multirotors which should not support this), desired PWM output rate in Hz (again required for some multirotors). 2012-12-13 10:23:02 +01:00
Lorenz Meier
26faab64e5 Merge branch 'master' of github.com:PX4/Firmware into fixedwing_outdoor 2012-12-09 19:19:59 +01:00
px4dev
154035279f Merge pull request #98 from sjwilks/px4io_safety_switch
Added more LED state logic and improve code.
2012-12-08 14:35:32 -08:00
Simon Wilks
03b51c69e0 Added more LED state logic and improve code.
The LED will now also indicate when the FMU is ARMED. Switched to using
a 16-bit value where each bit indicates what state the LED should be
in.
2012-12-08 13:39:28 +01:00
px4dev
566012d5aa Merge pull request #97 from sjwilks/px4io_safety_switch
Add new safety switch LED blink sequence when both FMU and IO are armed
2012-12-07 18:53:16 -08:00
Simon Wilks
197e573885 Add an additional safety switch LED blink sequence when FMU and IO are armed
If both the FMU and the IO board are armed then the secure switch will
blink two times quickly then a pause followed by two quick blinks and
so on.
2012-12-07 21:34:41 +01:00
Lorenz Meier
82cbac70ee Fixed calibration check 2012-12-07 17:07:42 +01:00
Lorenz Meier
1ebb3b4ada Merged DSM fixes 2012-12-05 19:55:33 +01:00
px4dev
fd771f67f2 Adjust the control mapping from DSM receivers to correspond to the standard PPM control mapping for channels 0-4. 2012-12-04 22:00:24 -08:00
px4dev
7c3b28d503 Lock out the PPM decoder if the DSM or S.bus decoders have seen a frame recently. 2012-12-04 09:52:16 -08:00
px4dev
1485a4ec1a Fix breakage to the DSM parser introduced with the input prioritisation logic. Back out to a "any input wins" strategy; connecting multiple receivers to I/O at the same time is currently not supported (read: strange things will happen). 2012-12-03 23:20:28 -08:00
px4dev
6e328b4d7a Add a 'monitor' verb to the px4io command so we can watch inputs to IO (it could get smarter). 2012-12-03 23:19:12 -08:00
px4dev
451ecc1bf4 Remove a few cut-and-paste author attributions. 2012-12-02 17:53:31 -08:00
px4dev
ad6c60c77c Merge pull request #90 from PX4/#89-BlinkM-driver
BlinkM driver
2012-12-01 22:59:36 -08:00
px4dev
b02c69243d Merge pull request #75 from PX4/delay_test
Added delay test to measure comm delays with a led / scope
2012-12-01 22:55:55 -08:00
px4dev
55e2e18885 Merge pull request #73 from PX4/io_arming
Made sure IO and FMU obey the lockdown flag when arming motors
2012-12-01 22:55:33 -08:00
px4dev
c09ed414fd Merge pull request #80 from PX4/#61-px4io-spektrum-decoder
#61 px4io spektrum decoder
2012-12-01 22:54:06 -08:00
px4dev
d92827c54c Merge pull request #76 from PX4/topics_cleanup
Cleaned up different uorb topics, cleaned up excessive stack sizes
2012-12-01 22:53:15 -08:00
px4dev
5609604af5 Merge pull request #85 from julianoes/hotfix_gps_heading
Fixed missing heading for mtkcustom and nmea
2012-12-01 22:52:59 -08:00
px4dev
269bd9f403 Force the fade speed to something sensible. Deal better with failed probes. 2012-12-01 19:36:02 -08:00
px4dev
2a8ef50df4 A driver and shell command for the BlinkM I2C LED controller. 2012-12-01 19:29:36 -08:00
px4dev
404332aefe Break out the task stack usage sniffer so we can use it on systems where the task layout has been shrunk (e.g. PX4IO) 2012-12-01 14:55:48 -08:00
Lorenz Meier
126e6ac207 Enabled manual override switch, work in progress. Added initial demix testing code to support delta mixing on the remote for convenient manual override 2012-12-01 16:30:21 +01:00
Lorenz Meier
2bfb672791 Cleaned up mode indication 2012-12-01 16:29:06 +01:00
Lorenz Meier
aa1d57c085 Allowed mode switching via command 2012-12-01 16:28:53 +01:00
Lorenz Meier
fd14084768 Merged with master 2012-12-01 12:04:43 +01:00
Lorenz Meier
121a9fc490 Merge branch '#61-px4io-spektrum-decoder' into fixedwing_outdoor 2012-12-01 10:51:25 +01:00
Lorenz Meier
de88732e8e Prevented unhealthy RC input from propagating through the system 2012-12-01 10:49:52 +01:00
Lorenz Meier
008a354391 Merge branch 'master' of github.com:PX4/Firmware 2012-12-01 09:58:11 +01:00
px4dev
ea8872f545 Merge branch 'sbus' of https://github.com/PX4/Firmware into #61-px4io-spektrum-decoder 2012-12-01 00:50:39 -08:00
px4dev
efd3b9dea6 Clean up the FMU communications init. 2012-11-30 22:36:17 -08:00
px4dev
3e036e26c9 Disable the flow control signals for USART2/3, since we use them for other things. 2012-11-30 22:31:07 -08:00
px4dev
7d9d307ab0 We don't need non-blocking I/O for this context anymore; it's OK for it to block. 2012-11-30 22:15:40 -08:00
px4dev
8c4e9de70a Use the right constraint for the output mixer; we might end up wanting more virtual control channels. 2012-11-30 21:52:18 -08:00
px4dev
1e6e06595a Avoid processing S.bus channels that cannot be communicated to FMU 2012-11-30 21:51:36 -08:00