as Tools/update_px4_ros2_bridge.sh as been deleted
update_ros2_bridge, update_px4_ros_com and update_px4_msgs
are no more needed
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
- vehicle_angular_velocity: ESC RPM notch filters minimize filter resets
- only allow one filter init per axis per cycle
- "park" ESC notch filters at min frequency instead of full disable
- relax timeout before a notch filter is disabled
- add new parameter IMU_GYRO_DNF_MIN for configuring the minimum notch filter frequency
- avoid the possibility of unsigned underflow from subtracting two HRT timestamps (uint64_t)
- most of these aren't problematic, but people tend to replicate the pattern, so it's better to be safe
- likely wasn't a problem when people were using hrt_absolute_time() in place, but if using an existing timestamp there's the possibility it's older than a more recent topic update
- update all msgs to be directly compatible with ROS2
- microdds_client improvements
- timesync
- reduced code size
- add to most default builds if we can afford it
- lots of other little changes
- purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
- working towards keeping all height source (baro/ev/gnss/rng) handling as consistent as possible, possibly refactoring these out into separate classes later
This fixes a bug where by accident the vtol_status was considered instead of the
vehicle_status, preventing it from running on planes.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
This commit fixes feedforward acceleration setpoints for fixedwing offboard position control.
Previously when acceleration feedforward inputs were sent, negative curvature accelerations were not being computed properly
ekf2: merge mag 3d innov var, Hx and Kx computation to reduce flash
Slightly less code produced, almost no performance change
ekf2_mag3D: do not pre-compute Kalman gains
The vector of Kalaman gains is not too expensive to compute using
matrix-vector multiplication. Pre-generating it using CSE takes a lot of
flash space for little benefit.
- this is a precaution to eliminate the possibility of getting stuck in
a loop trying to keep up with a high rate publication that could be
coming from a higher priority task
- in the worst case scenario printing the error message can take longer than the next gyro publication, so combined with an infinite loop you could get stuck here
bresch