Daniel Agar
cac9c51ac8
ROMFS: purge old mixing system
...
- SYS_USE_IO is now off by default (enabled by default per board)
2022-09-09 09:14:09 -04:00
Daniel Agar
6d78054f50
mavlink USB auto start/stop on boards with VBUS
...
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
Daniel Agar
5eddf32cd3
boards: cubepilot_cubeorange only start ADSB mavlink if console not present
...
- cubepilot_cubeorange_test has the console enabled (used for test rack and bench debugging)
2021-09-06 11:52:58 -04:00
Sander Swart
bce1c06174
Added new line at the end of the file as per code style
2021-09-06 09:51:38 +02:00
Sander Swart
223410e17a
Enable Cube Orange built in ADS-B receiver by default
2021-09-06 09:51:38 +02:00
Daniel Agar
9e0fa8e82b
boards: set SENS_TEMP_ID defaults
2021-09-01 15:16:00 -04:00
Daniel Agar
c5b1fe86ca
delete deprecated BAT_* parameters
2021-07-08 22:19:12 -04:00
Daniel Agar
ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)
...
- include icm20948 on most boards by default
- create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
2021-04-04 21:18:16 -04:00
Daniel Agar
f8eaa6e46b
ROMFS handle bl_update generically
...
- include all available legacy bootloaders
2021-03-11 00:38:18 +01:00
Daniel Agar
4d288512b5
add board architecture specific init defaults
2021-03-09 19:59:41 +01:00
Daniel Agar
a257120e8d
boards: use new param default mechanism
2021-02-12 08:27:47 -05:00
Daniel Agar
a2442ffb48
board: enable UAVCAN sensors by default on F7/H7
2021-02-02 09:01:12 +01:00
Daniel Agar
3b71e8e62d
boards: cubepilot fix BAT2_V_DIV param default typo
2021-01-31 21:16:42 -05:00
Daniel Agar
318c7e83b3
support up to PWM 14
...
- generate PWM_MAIN 1-14
- generate PWM_AUX 1-8
- generate PWM_EXTRA 1-8
- px4io and pwm_out directly read configuration parameters
- only available and active physical outputs are actually shown for configuration
- overall saves flash despite adding many new parameters
2021-01-30 15:55:53 +01:00
Daniel Agar
763c3b8fda
boards: start enabling multi-EKF by default on F7/H7
2021-01-10 17:56:34 +01:00
Daniel Agar
ce51a01822
boards: cubepilot orange and yellow start isolated sensor bus (SPI4) first
...
- this makes the isolated sensors primary by default
2020-11-16 09:31:12 -05:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
2020-09-07 23:09:20 -04:00
Beat Küng
787f9c1213
i2c: use board-specific bus numbering for '-X -b <bus>' CLI
...
As boards don't have their external buses labeled consistently, it was not
useful to use an abstraction.
2020-09-03 15:32:35 -04:00
Daniel Agar
91ad8473ab
boards: cubepilot/cubeorange small fixes and improvements
...
- defconfig UART sync with cube yellow (and other boards)
- manually start ak09916 (Here2) on I2C2 with proper rotation
2020-08-16 17:45:47 -04:00
Daniel Agar
cfbf69f2a7
boards: rename Hex -> CubePilot
...
- hex_cube-orange_default -> cubepilot_cubeorange_default
- hex_cube-yellow_default -> cubepilot_cubeyellow_default
2020-07-26 13:55:41 -04:00
