ee580206b4
mavlink: Only sending HIL control commands if the system is actually armed
2014-05-04 14:06:38 +02:00
75796e95b4
mc_att_control: MC_YAWRATE_MAX parameter added
2014-05-03 19:19:57 +02:00
5199dea2b3
Merge pull request #876 from PX4/autodeclination
...
Added automatic declination lookup
2014-05-03 03:41:30 -07:00
f6d61dfb4c
mavlink: swap x and y when handling MANUAL_CONTROL mavlink message
2014-05-01 23:45:21 +02:00
2829d65871
Merge pull request #881 from PX4/led_fix
...
commander: Stop mixing board support and high level code - just accept t...
2014-04-30 06:34:34 -07:00
1dfa2f100e
commander: Stop mixing board support and high level code - just accept that non-mandatory leds may or may not be there
2014-04-30 15:33:47 +02:00
6c76e8ea50
shortened rc_assisted_th to rc_assist_th in case we add a dedicated switch mapping later
2014-04-29 20:51:04 -07:00
0c58588a87
mc_att_control: yaw feed-forward in manual control modes fixed
2014-04-29 19:51:05 +02:00
2ee02e5e4b
Merge pull request #874 from jean-m-cyr/master
...
Proper data manager restart handling
2014-04-29 07:53:30 +02:00
ef75bbf2ef
Updated flight modes diagrams & comments.
2014-04-28 22:11:02 -07:00
31089a290b
Replaces poshold/althold with posctrl/altctrl
2014-04-28 21:47:45 -07:00
da525f29f1
Add missing header in mixer load command
2014-04-28 19:25:13 +02:00
4378454a10
mc_pos_control: hotfix, MPC_TILTMAX_AIR and MPC_TILTMAX_LND parameters fixed
2014-04-28 17:49:57 +02:00
ac52111085
px4io: support PX4IO_P_SETUP_FORCE_SAFETY_OFF
...
this allows the FMU to force the safety off on the IO board. Useful in
two cases:
1) vehicles where the safety switch is impractical or not useful
(eg. HAB planes or internal combustion motors)
2) doing ESC calibration on multi-copters
2014-04-28 11:45:20 +02:00
ab257ebcce
Proper data manager restart handling
...
Introduce SYS_RESTART_TYPE parameter having one of 3 values: boot
restart, inflight restart, or unknown restart, and defaulting to unknown
restart.
px4io.cpp sets this parameter according to the type of restart detected.
dataman.c retrieves this parameter and clears data entries according to
their persistence level. Does nothing if unknown restart.
2014-04-28 00:52:19 -04:00
269800b48c
renamed EASY to POSHOLD and SEATBELT to ALTHOLD
2014-04-27 14:06:00 -07:00
6a7b104c2b
compiles
2014-04-27 13:12:28 -07:00
07c35010aa
Merged in upstream master
2014-04-27 12:43:13 -07:00
08408594ec
Renamed parameters which changed from RAD to DEGREES to avoid user confusion. Also made naming of the two parameters more consistent.
2014-04-27 16:06:34 +02:00
e6d332aa7c
Make commander less pedantic about position status
2014-04-27 15:50:53 +02:00
c74248c8b1
Merged mpc_rc with master
2014-04-27 15:45:33 +02:00
4a949a9565
Merge pull request #749 from DonLakeFlyer/ArmDisarm
...
Arm/Disarm duplication removal and support for Disarm in VEHICLE_CMD_COMPONENT_ARM_DISARM
2014-04-26 12:24:42 +02:00
5bd8e6f6b3
Merge pull request #845 from PX4/mag_decl_hotfix
...
Mag declination hotfix
2014-04-26 12:23:48 +02:00
eb520e7dcd
Merge pull request #849 from PX4/compile_pedantic
...
Compile pedantic
2014-04-26 12:22:13 +02:00
31b5d0f5c8
Merge branch 'mpc_rc' of https://github.com/TickTock-/Firmware into rc_merged
2014-04-25 20:30:01 -07:00
84943644d7
mc_pos_control: parameters comments minor fixes
2014-04-25 23:06:32 +02:00
a432ed4900
mc_pos_control: convert tilt_max to degrees
2014-04-25 22:53:48 +02:00
2453b354fa
Failsafe landing without position control fixed
2014-04-25 22:26:51 +02:00
0c1de81785
Merge branch 'master' into mpc_rc
2014-04-25 21:39:59 +02:00
f0298e005a
Merge pull request #852 from PX4/sensors_loop
...
sensors: Keep looping in sensors app even if gyros do not update any mor...
2014-04-25 16:52:53 +02:00
22aaae197b
Merge branch 'rc_timeout' into mpc_rc
2014-04-24 22:40:46 +02:00
63c50676f9
MISSION switch renamed to LOITER
2014-04-24 22:38:19 +02:00
db474072a7
Merge branch 'rc_timeout' into mpc_rc
2014-04-23 19:03:03 +02:00
56592ec77d
commander: don't start RTL on failsafe if landed
2014-04-23 19:01:05 +02:00
d7d6a3d3b7
filter gps simulation hil gps message with sysid
2014-04-23 16:26:44 +02:00
a2940182ef
add parameter to mavlink app to allow parsing of HIL GPS message even if not in HIL mode
...
Conflicts:
src/modules/mavlink/mavlink_receiver.cpp
2014-04-23 15:53:48 +02:00
34597599fc
navigator: merging bug fixed
2014-04-23 15:26:24 +02:00
dc8a0b291a
Merge branch 'mpc_local_pos' into mpc_rc
2014-04-23 15:25:13 +02:00
320c97c498
navigator: check if mission reached on vehicle_status updates
2014-04-23 15:24:45 +02:00
2998685a3a
Merge branch 'mpc_local_pos' into mpc_rc
2014-04-23 14:22:52 +02:00
60554c8a56
navigator: publish global_position_setpoint on vehicle_status updates
2014-04-23 14:15:59 +02:00
971e8fc4ff
Made failsafe more intuitive. Default (0) maps to whatever channel is throttle. If a non-zero value is entered, a direct channel map is used so use
2014-04-22 23:19:04 -07:00
81c03154b9
Added ASSISTED, AUTO, EASY, RETURN, & LOITER programmable thresholds to enable various user mode switch configs (orig., 2x3, 1x6, etc).
2014-04-22 21:49:29 -07:00
831a7c4a83
Added RC_MAP_FAILSAFE parameter for customizing failsafe channel. Default to THROTTLE
2014-04-22 20:53:07 -07:00
7e621070ca
renamed mission_switch to loiter_switch and assisted_switch to easy_switch
2014-04-22 18:23:27 -07:00
d6e6ee3440
Merge branch 'rc_timeout' of https://github.com/TickTock-/Firmware into rc_merged
2014-04-22 17:43:36 -07:00
a1cf8801bb
sdlog2: add failsafe state logging
2014-04-22 11:36:25 +02:00
e4a4430f9f
Merge branch 'master' into rc_timeout
2014-04-22 11:18:07 +02:00
302233a34f
Merge branch 'master' into mpc_local_pos
2014-04-22 11:13:11 +02:00
aefea1a95d
Merge pull request #850 from PX4/mavlink_startup_cleanup
...
mavlink: Start the same in HIL mode as in normal mode. Requires all HIL ...
2014-04-22 09:57:56 +02:00
Lorenz Meier