fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-20 22:43:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
39,676 Commits 852 Branches 161 Tags
aefbd80b5394e8926e3d7d7d62e7c8bb129fef9f
Commit Graph
226 Commits
Author SHA1 Message Date
Daniel Agar daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00
Daniel Agar 98d706772e boards: px4_fmu-v2_rover disable events module to save flash 2021-12-24 20:06:13 -05:00
Beat Küng 6c8f322dfe px4/fmu-v2/test: disable modules to reduce flash 2021-12-24 20:06:13 -05:00
Beat Küng 8743b78474 px4/fmu-v2/rover: disable modules to reduce flash 2021-12-24 20:06:13 -05:00
Julian Oes 9686c81f7d boards: enable flow control on CDCACM 
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.

The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.

The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4.  For more information about the issue, see:
apache/incubator-nuttx#3633

As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
 2021-12-21 08:01:38 +01:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
Daniel Agar a2064cceff boards: enable early MPU reset on any board potentially not using the PX4 bootloader 2021-12-01 20:13:41 -05:00
David Sidrane 394b431364 px4_fmu-v2 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
Beat Küng db2a1e5fee px4/fmu-v2: disable modules to reduce flash 2021-11-23 12:40:22 -05:00
Beat Küng 4c03def6e9 boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST 2021-11-23 12:40:22 -05:00
Daniel Agar 25846f48c4 boards: px4_fmu-v2/v3 use SPI bus power off rather than full reset 2021-11-22 11:27:45 -05:00
Daniel Agar f5d9b01f5c NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar 2d816e0b3e [WIP] manual_control selector hacks 2021-11-09 16:05:25 +01:00
Peter van der Perk c6f249f7f1 Kconfig merge_config only set to 'n' when BOOL 
Run make updateconfig to fix delta's of derived configs
 2021-11-02 09:34:21 -04:00
Peter van der Perk 3de5623556 Kconfig remove defconfig in root directory after gen 
Cleanup fmu configs
 2021-10-07 10:09:01 -04:00
Peter van der Perk ed5fee1a72 Backport #18311 mc atune 2021-10-07 10:09:01 -04:00
Peter van der Perk 454c907b7d Kconfig backport #18327 mag_bias 2021-10-07 10:09:01 -04:00
Peter van der Perk 6a1675ac28 Backport #17864 to px4board config 2021-10-07 10:09:01 -04:00
Peter van der Perk 12898ea560 [Kconfig] Update configs 06-09-21 2021-10-07 10:09:01 -04:00
Peter van der Perk 33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk a918025adb [Kconfig] fix fmu-v2 configs 2021-10-07 10:09:01 -04:00
Peter van der Perk efc91d2b69 [Kconfig] Fixed inclusion of microbench bydefault when TESTING was enabled 
Added full optimization option
 2021-10-07 10:09:01 -04:00
Peter van der Perk a1247d6bcf [Kconfig] Backport cmake config changes 2021-10-07 10:09:01 -04:00
Peter van der Perk b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00
Peter van der Perk 21e6547ac7 [Kconfig] Toolchain & platform fixes, SITL still broken 2021-10-07 10:09:01 -04:00
Peter van der Perk 0400c24af5 [Kconfig] 17-08-21 rebase fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk 6af0477733 [Kconfig] Gnerate px4board from old cmake 
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
 2021-10-07 10:09:01 -04:00
Daniel Agar bbfaa4694c boards: cleanup serial RX DMA hrt_call_every 
- remove ts_to_abstime dependency
 2021-10-06 14:39:59 -04:00
Daniel Agar 6d78054f50 mavlink USB auto start/stop on boards with VBUS 
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
 2021-10-03 15:32:54 -04:00
bresch 1443f773da mbe: add module to targets 2021-10-02 21:25:21 -04:00
bresch 5874b1f87c mc atune: add module to all targets 
- adjust flash constrianed targets to fit
 2021-10-02 18:12:05 -04:00
Beat Küng bf48057090 px4/fmu-v2_test: disable modules to reduce flash 2021-09-11 14:08:41 -04:00
Beat Küng 9bba13f3e2 px4/fmu-v2/multicopter: disable some modules to reduce flash 2021-09-11 14:08:41 -04:00
Beat Küng c5c80e31b6 boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h 2021-09-08 16:10:24 -04:00
Beat Küng a8e75d174c boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS 2021-09-08 16:10:24 -04:00
Daniel Agar 560ff42923 boards: px4_fmu-v2_test disable ms4525 to save flash 2021-09-05 23:18:28 -04:00
Daniel Agar 56a8f5f73e boards: px4_fmu-v2_test disable mc_hover_thrust_estimator to save flash 2021-09-05 23:18:28 -04:00
Daniel Agar 49f81a9e0e boards: px4_fmu-v2_default disable load_mon to save flash 2021-08-18 12:20:13 -04:00
David Sidrane 79f8865e65 px4_fmu-v2:All configs Use NO_HELP option to save flash 2021-08-13 14:22:00 -04:00
David Sidrane be479654c2 px4_fmu-v2: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
Daniel Agar 89b920333b boards: px4_fmu-v2_multicopter disable gyro_calibration module to save flash 2021-08-04 17:15:24 -04:00
Beat Küng 0e1f3a2d62 px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name 2021-08-03 10:36:25 +02:00
David Sidrane 6379f2b032 px4_fmu-v2:Use NO_HELP option to save flash 2021-07-30 22:35:02 -04:00
Daniel Agar b33fdf704b boards: px4 fmu-v2/v3 swap external SPI chip select order 
- fixes https://github.com/PX4/PX4-Autopilot/issues/17858
 2021-07-30 09:28:04 -04:00
Daniel Agar 774ad80ba0 systemcmds/tests: split out microbenchmarks and remove obsolete tests 
- reorganize Jenkins HIL tests
 2021-07-18 18:02:33 -04:00
Daniel Agar 12ad7b17ce Makefile: add all_variants_@ helper target and consolidate github actions builds 2021-07-15 21:09:50 -04:00
Beat Küng 50b0f0e392 iridiumsbd: disable module until everything is fixed 
There seem to be more issues in combination with MAVLink.
 2021-07-02 12:45:18 +02:00
David Sidrane 05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
David Sidrane 62fd132047 boards:Use inttypes 
nxp_ucans32k146:Fix constant

spracing_h7extreme:Use inttypes
 2021-06-16 17:07:47 +02:00
echoG 6bc09138c1 Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library 2021-06-09 12:17:45 -04:00