fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-29 03:53:33 +08:00
Code Issues Packages Projects Releases Wiki Activity
37,704 Commits 852 Branches 161 Tags
a93f8dade4e65848cd33cbb9dd0eb10ccbbf28d1
Commit Graph
108 Commits
Author SHA1 Message Date
Beat Küng 0e1f3a2d62 px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name 2021-08-03 10:36:25 +02:00
Kirill Shilov e13884410b heater: added support of inverted IMU heat controller output 2021-07-20 10:37:53 -04:00
David Sidrane 05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
David Sidrane 62fd132047 boards:Use inttypes 
nxp_ucans32k146:Fix constant

spracing_h7extreme:Use inttypes
 2021-06-16 17:07:47 +02:00
echoG 6bc09138c1 Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library 2021-06-09 12:17:45 -04:00
Daniel Agar c3884b5bc1 fake_imu (formally fake_gyro) updates for testing gyro filtering 
- fake_imu now publishes sine sweeps over 10 seconds
 - accel is also published so that fake IMU can be selected when the only option
 2021-05-17 20:26:25 -04:00
Daniel Agar ad934b4911 icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) 
- include icm20948 on most boards by default
 - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
 2021-04-04 21:18:16 -04:00
Daniel Agar 631d1647d3 boards: minimize unnecessary differences in default variants 2021-03-28 14:46:47 -04:00
Daniel Agar e57aaaaa5e rotate accel/gyro FIFO before publish and fix angular velocity filter resets 
- rotates accel & gyro FIFO data before publication both to simplify downstream usage (including log review) and fix other issues
     - to best handle int16_t data rotations are now either performed with swaps if possible, otherwise promoted to float, rotated using the full rotation matrix, then rounded back to int16_t
 - fix sensors/vehicle_angular_velocity filter reset both with proper rotation and new calibration uncorrect helper
      - in FIFO case filtering is done before calibration is applied, but we need to handle a possible reset from a completely different sensor (vehicle body angular velocity -> sensor frame uncorrected data)
 2021-03-22 12:01:12 -04:00
Daniel Agar 2257c3767e simple gyro auto calibration module 2021-03-15 09:46:47 +01:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar 19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Daniel Agar 6482120d9a sensors/vehicle_angular_velocity: use full raw FIFO data (sensor_gyro_fifo) if available 2021-02-25 10:06:17 -05:00
Beat Küng 7e33d03470 drivers: remove tap_esc 
- it's not used anymore
- it would need a refactoring to use mixer_module
 2021-02-25 09:28:37 -05:00
Daniel Agar 11ad41f7cb delete old imu/mpu6000 driver 2021-02-23 15:58:36 -05:00
Daniel Agar 6cf06319d2 boards: nxp_fmurt1062-v1 remove irlock and lights/blinkm to save flash 2021-02-23 13:23:36 -05:00
Daniel Agar 2a47583be5 boards: nxp/fmurt1062-v1 disable vmount 2021-02-17 13:54:34 -05:00
Daniel Agar ab0d0fd0be uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar 44df0fb7a2 Analog Devices ADIS16448 rewrite 
- new IMU driver structure with state machine (no sleeps in bus thread)
 - verify all configured registers and trigger reset on failure
 - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
 - don't use CRC-16 on burst transfers except for verified lots
 2021-02-16 10:29:07 +01:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar 1ec10bfcc6 boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane 1b70e5f978 nxp_fmurt1062-v1:Rev B will be Using active CD 2020-12-04 12:59:09 -05:00
David Sidrane 394c2edea3 nxp_fmurt1062-v1:Added Single wire support for SBUS 2020-12-04 12:59:09 -05:00
David Sidrane d4a78cea5a nxp_fmurt1062-v1:Correct intial state of PIO_nVDD_5V_{HIPOWER|PERIPH}_E to OFF 2020-12-04 12:59:09 -05:00
David Sidrane 67a78a70ea nxp_fmurt1062-v1:Telem 1 & 2 Swapped to have real HW HS on Telm2 2020-12-04 12:59:09 -05:00
David Sidrane 1dd22acd12 nxp_fmurt1062-v1:Fix memory overflow 2020-12-04 12:59:09 -05:00
David Sidrane 0ca7783ea5 nxp_fmurt1062-v1:Refreshed defconfig fixing 'if-then' disabled 2020-12-04 12:59:09 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane ad1c603af4 nxp_fmurt1062-v1: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 0db70ea475 nxp_fmurt1062-v1:Track fixes on schematic USDHC CD now correct polarity 2020-11-20 00:48:31 -05:00
David Sidrane 136b6a3509 nxp_fmurt1062-v1:Track fixes on schematic OC/EN had been swapped 2020-11-20 00:48:31 -05:00
Daniel Agar 880dc6accd ekf2: compile at MAX_CUSTOM_OPT_LEVEL 2020-11-11 20:17:52 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Beat Küng 274ccaf57c system: include shutdown lock to BOARD_INDICATE_ARMED_STATE 
BOARD_INDICATE_ARMED_STATE was only set during arming, so an external
component might have reset the board during param save, leading to param
loss.

This extends the API to trigger the arming state also while the shutdown
lock is taken.
 2020-10-09 08:23:47 +02:00
Tanja Baumann b5ebdb8e41 add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane 94b5c961bc nxp_fmurt1062-v1: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 5698bc254a nxp_fmurt1062-v1:Track PX4 Sensor changes 2020-09-16 21:32:04 -04:00
David Sidrane 1abe88df61 nxp_fmurt1062-v1 Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
SalimTerryLi c037dbef21 Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
David Sidrane fdcd9b2de1 npx_fmurt1062-v1:CONFIG_BOARD_CRASHDUMP is not supported 2020-09-03 14:55:09 +02:00
Daniel Agar 7569722821 iSentek IST8310 magnetometer rewrite 
- simple state machine to reset, configure, etc
 - checked register mechanism (sensor will reset itself on configuration error)
 - configured in 16 bit mode (1320 LSB/Gauss instead of 330 LSB/Gauss)
 - adjusted orientation handling in driver to match datasheet as closely as possible
     - in many external compass units the rotation was wrong and very difficult to actual determine how to set correctly
 2020-09-02 13:14:45 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
David Sidrane f8b6de24c7 nxp_fmurt1062-v1:Assign board_id 2020-07-31 09:46:27 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar e819f99064 new Bosch BMI055 IMU driver using FIFOs and DRDY 
- accel & gyro FIFOs enabled
 - FIFO watermark on data ready interrupt
 - sensor side filtering completely disabled
 - gyro now respects `IMU_GYRO_RATEMAX` (up to 2 kHz)
 - saves a few % cpu (at default rate)
 2020-06-15 10:19:14 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00