41f36aa99f
Enable debug key/value stream by default
2016-01-09 16:59:37 +01:00
c17466ffee
Added fix for missing declaration of get_commands for qurt
...
Signed-off-by: Mark Charlebois <charlebm@gmail.com >
2016-01-09 01:54:00 +01:00
e12e029659
Updated dspal version
...
Added dspal_math.h
Signed-off-by: Mark Charlebois <charlebm@gmail.com >
2016-01-09 01:53:52 +01:00
0adb6d0104
Fix QuRT formatting
2016-01-09 01:42:30 +01:00
5bc2019fd5
Fixes for qurt build
...
Added missing functions that were added for other targets but not for qurt.
Added workaround for missing sem_timedwait(). This may have a performance
impact until a sem_timedwait is supported.
std::to_string is not supported by the hexagon compiler
Signed-off-by: Mark Charlebois <charlebm@gmail.com >
2016-01-08 08:49:36 +01:00
bf1a510611
init sbus uart in full duplex mode
2016-01-08 08:00:21 +01:00
2b04f5acb9
updated ecl ekf2
2016-01-08 07:07:45 +01:00
4907bf3374
Sim: Keep MAVLink parse status persistent, because that is the frickin state machine
2016-01-07 23:19:20 +01:00
24116b2672
Only try to disable HW flow control when not being UDP
2016-01-07 23:19:00 +01:00
72dc4d3290
simulator: fix mavlink parsing of sim+RC stream
...
The mavlink stream from the simulator and the mavlink stream over serial
(used for RC input) both had the same MAVLINK_COMM channel and were
therefore sharing an internal buffer in mavlink_parse_char. This meant
that most (low rate) serial messages were getting swallowed by the high
rate simulator stream.
This change fixes the issue where RC input was not properly arriving in
Gazebo, however it breaks the `commander takeoff` command in SITL which
needs to be investigated.
2016-01-07 23:08:32 +01:00
4b9a793c8f
properly handle takeoff waypoint when not currently at takeoff location
2016-01-07 22:24:32 +01:00
20c8c6a2fa
Fix VDev formatting
2016-01-07 22:24:10 +01:00
857701daa1
Merge pull request #3441 from kd0aij/fmu_pwm_limit
...
Fmu pwm limit
2016-01-06 10:02:43 +01:00
268990f216
Merge pull request #3433 from PX4/posix_uart
...
MAVLink app: Enable network and serial on POSIX
2016-01-06 09:27:18 +01:00
99f4487cc3
allow yawing with 0 throttle, changed condition to not being landed
2016-01-06 08:33:51 +01:00
cb52a7eeec
Raise number of max FDs for VDev
2016-01-05 22:53:27 +01:00
2ce3ef1caa
VTOL: initialize fds struct
2016-01-05 22:11:06 +01:00
e9865071fa
Merge pull request #3439 from PX4/vtol_sitl
...
VTOL fixes for SITL
2016-01-05 21:14:34 +01:00
30c620a426
Print backtrace on file descriptor exceed error
2016-01-05 19:35:03 +01:00
f01df766a9
POSIX: Warn about file descriptor exceed with associated thread name
2016-01-05 19:34:57 +01:00
fc2b9a5031
Print backtrace on file descriptor exceed error
2016-01-05 19:03:29 +01:00
adad9271df
POSIX: Warn about file descriptor exceed with associated thread name
2016-01-05 19:02:07 +01:00
2e9cec5b06
Simple app: Use enough stack
2016-01-05 19:01:16 +01:00
669f8bf098
Matlab example: Use enough stack
2016-01-05 19:01:16 +01:00
7c8a2a1e18
HW test example: Use enough stack
2016-01-05 19:01:16 +01:00
bd6e4b9d9d
Merge remote-tracking branch 'PX4/master' into logHandler
...
* PX4/master: (45 commits)
don't use default source address for onboard udp link, wait on remote
Configure Easystar HIL setup to do Runway takeoff
ROMFS: Set 3DR quad tuning to more realistic default values
Fix incomplete boot on new EKF config
Fix px4fmu-v2_ekf2 config
Updated MAVLink protocol version
MAVLink: Start slightly differently on USB
Start shell only if SD card not present
Update ECL
NuttX configs: added px4fmu-v2_ekf2 target for EKF2 development on Pixhawk
Get QuRT drivers out of the way, as we are using our own
Fix POSIX eagle config
Remove unmaintained NuttX config
VDev: fix code style
Add new posix_eagle_default and qurt_eagle_default targets
Fix QuRT build error
Fix FMUv4 USB PID
Speed up Vagrant
VTOL: Fix motor index use in VT_FW_MOT_OFF. Create new param to re-default all deployed vehicles to not shut down motors.
VTOL: Fix MOT_OFF bug
...
2016-01-05 01:03:11 -05:00
c0773c0157
Handling missing data requests without clearing session.
...
Letting stream handle all transfers.
Tested and fully working with new QGC PR.
2016-01-05 01:00:48 -05:00
11ed5169cc
don't use default source address for onboard udp link, wait on remote
2016-01-04 23:58:05 +01:00
f18afc47cb
revert short PWM ramp interval
2016-01-04 10:54:38 -07:00
1b860f0b31
fix code style
2016-01-04 10:51:45 -07:00
e6155d64ae
fix fmu arming bug
2016-01-04 10:37:17 -07:00
a79c6be39b
tailsitter: go into mc mode it transition switch not assigned
2016-01-04 18:19:22 +01:00
5227dbe26a
MAVLink: Send RC_CHANNELS_OVERRIDE
2016-01-04 12:35:23 +01:00
c343926b51
MAVLink app: Enable network and serial on POSIX
2016-01-04 12:25:35 +01:00
a8a9c9b8ec
MAVLink: Start slightly differently on USB
2016-01-03 15:28:04 +01:00
6e0f96c095
Update ECL
2016-01-03 10:41:24 +01:00
c91df50d7e
VDev: fix code style
2016-01-02 09:59:06 +01:00
2d72c95eda
Add new posix_eagle_default and qurt_eagle_default targets
2016-01-02 09:30:51 +01:00
55ce8c0c42
Fix QuRT build error
2016-01-02 01:27:29 +01:00
3b2e82cd62
VTOL: Fix motor index use in VT_FW_MOT_OFF. Create new param to re-default all deployed vehicles to not shut down motors.
2016-01-01 14:44:42 +01:00
56e5c50703
VTOL: Fix MOT_OFF bug
2016-01-01 14:39:03 +01:00
e50fdbe327
Update ECL
2016-01-01 12:31:56 +01:00
ce43c79a5a
Update ECL use
2016-01-01 11:42:25 +01:00
276855acd2
EKF2: Remove todo
2016-01-01 11:39:16 +01:00
28f5cb8fe6
ekf2: Changes required to enter POSCTL mode
...
Adds missing local position and global position data
2016-01-01 12:30:12 +11:00
3d971e214a
don't update local position reference if home position changes
2015-12-31 13:24:12 +01:00
d39e313768
use the proper check to prevent multiple mavlink instances on the same udp port, added warning when different remote than localhost connects to udp
2015-12-31 11:50:52 +01:00
eff94677a4
MAVLink: Only broadcast heartbeat on local network if not in onboard mode
2015-12-30 17:26:09 +01:00
4f548f328a
Set range to 0.9 Ga max since full scale range is 1.3 Ga
2015-12-30 11:54:52 +01:00
62763904f2
Simulator: Add performance counter for incoming packet interval
2015-12-29 17:12:29 +01:00
Lorenz Meier