fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-26 23:03:33 +08:00
Code Issues Packages Projects Releases Wiki Activity
34,698 Commits 852 Branches 161 Tags
a7a7e33614c3a36d00a44cb4fadff84424747e38
Commit Graph
155 Commits
Author SHA1 Message Date
Daniel Agar cd7713eba2 boards: delete unused variants 2021-02-22 20:08:36 -05:00
Daniel Agar 414f9f81d9 move fake GPS to standalone module 2021-02-20 14:13:36 -05:00
Daniel Agar ab0d0fd0be uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar 44df0fb7a2 Analog Devices ADIS16448 rewrite 
- new IMU driver structure with state machine (no sleeps in bus thread)
 - verify all configured registers and trigger reset on failure
 - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
 - don't use CRC-16 on burst transfers except for verified lots
 2021-02-16 10:29:07 +01:00
Daniel Agar fb2a199621 delete unmaintaned mkblctrl driver 2021-02-14 10:38:15 +01:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar 78dff6adcb boards: add CONSTRAINED_MEMORY build option 
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
 - limits number of EKF2 multi instances to 2.
 - enabled on all cortex m4 boards
 2021-02-01 08:56:22 +01:00
Daniel Agar 318c7e83b3 support up to PWM 14 
- generate PWM_MAIN 1-14
 - generate PWM_AUX 1-8
 - generate PWM_EXTRA 1-8
 - px4io and pwm_out directly read configuration parameters
    - only available and active physical outputs are actually shown for configuration
 - overall saves flash despite adding many new parameters
 2021-01-30 15:55:53 +01:00
Daniel Agar 77b21680fb sync ctrlalloc boards and add to CI 2021-01-18 11:25:37 -05:00
Julien LecoeurSilvan FuhrerRoman Bapst
 		343cf5603e initial control allocation support 
- control allocation module with multirotor, VTOL standard, and tiltrotor support
 - angular_velocity_controller
 - See https://github.com/PX4/PX4-Autopilot/pull/13351 for details

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Roman Bapst <bapstroman@gmail.com>
 2021-01-18 11:25:37 -05:00
Daniel Agar 1ec10bfcc6 boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
JacobCrabill 8e8497ff77 heater: px4io: Add support for heaters on IO MCU 2021-01-17 12:03:53 +01:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane 79bedbc908 px4_fmu-v3: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
SalimTerryLi 25eca31e3a New board Scumaker AirPi HAT for Raspberry Pi B series 2020-10-01 11:22:47 -04:00
Tanja Baumann b5ebdb8e41 add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane 347ab5daaa px4_fmu-v3: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane c620059076 px4_fmu-v3: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 0da14887d0 px4_fmu-v3 Updates for NuttX 9.1.0- 
px4_fmu-v3: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi 28a6e82698 Introduce new generic ADC driver for ADS1115 chip (#14437) 2020-09-14 11:03:40 -04:00
flbernier 0ece66dc80 Add a internal start for rgbled_ncp5623c on fmu-v2 v3 v4pro 2020-09-14 09:31:31 -04:00
SalimTerryLi c037dbef21 Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar d9102ce54c imu/invensense/icm20948: sync with other recent invensense improvements 
- clenaup ak09916 with simplifed setup and health check
 2020-06-22 10:11:22 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 5507c15bdc boards: move rgbled_pwm startup to appropriate boards 2020-06-08 16:49:46 -04:00
Daniel Agar 6c96748e54 boards: pixhawk mini add unused MPU9250 CS & DRDY pins 2020-06-03 04:03:27 -07:00
Julian Kent dd9c82eb20 systemcmds/gpio: Add nsh command to manipulate/read GPIO 
* Add basic GPIO test app for R/W on pins from nuttx shell
* Add gpio command to fmu-v3 and fmu-v4
* Sanitize gpio commands by pin configs, --force to override
 2020-05-23 11:47:40 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Beat Küng 34c75f2d36 boards: temporarily disable UART TX DMA 
work-around for https://github.com/PX4/Firmware/issues/14659.
This can be reverted when fixed properly.
 2020-04-27 08:47:46 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 1ac6230758 boards: always change default IMU_GYRO_RATEMAX on px4_fmu-v2/v3 and mro_x21 
- this can lower cpu usage considerably on older boards
 2020-04-15 21:52:02 -04:00
Daniel Agar 66eacd24bc px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Beat Küng cbed023334 px4/v{2,3}: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Julian Oes b01cdafcf6 boards: add esc_battery to build 2020-04-06 15:56:54 +02:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar 02f4ad61ec I2C/SPI require device type in constructor 2020-04-01 12:24:22 -04:00