David Sidrane
05bdef867d
Track NuttX syslog change
2021-06-16 17:07:47 +02:00
David Sidrane
62fd132047
boards:Use inttypes
...
nxp_ucans32k146:Fix constant
spracing_h7extreme:Use inttypes
2021-06-16 17:07:47 +02:00
echoG
6bc09138c1
Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library
2021-06-09 12:17:45 -04:00
Daniel Agar
5f775b508f
boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7
2021-06-01 15:19:15 -04:00
David Sidrane
32e92ba817
Revert:Pull downs - bad levels cause motor spins
2021-06-01 15:18:47 -04:00
David Sidrane
973068ebfe
holybro_can-gps-v1:Rev to RC9 HW
...
holybro_can-gps-v1:Fix LEDs
holybro_can-gps-v1:Only CAN1
holybro_can-gps-v1:ncp5623c at 0x39
2021-05-29 10:53:27 -04:00
Daniel Agar
51f738e54c
boards: bootloader.cmake trivial whitespace cleanup
2021-05-28 23:56:20 -04:00
Jukka Laitinen
071eaef884
Adjust paths to bootloader include files for boards
...
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae >
2021-05-26 12:57:37 -07:00
Daniel Agar
c3884b5bc1
fake_imu (formally fake_gyro) updates for testing gyro filtering
...
- fake_imu now publishes sine sweeps over 10 seconds
- accel is also published so that fake IMU can be selected when the only option
2021-05-17 20:26:25 -04:00
David Sidrane
3779ff3690
holybro_pix32v5: Disable OTG_ID_GPIO
2021-05-05 20:48:06 +02:00
David Sidrane
21cf26a69f
holybro_durandal-v1: Disable OTG_ID_GPIO
2021-05-05 20:48:06 +02:00
David Sidrane
9c761d9ae5
holybro_pix32v5: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
David Sidrane
b3b74eaaf6
holybro_kakutef7: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
David Sidrane
4c8dca738c
holybro_durandal-v1: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
Beat Küng
2219e096d7
cmake: embed param metadata if not CONSTRAINED_FLASH and not "test" LABEL
2021-04-15 08:16:51 +02:00
Daniel Agar
58b40fbbb9
boards: move testing to dedicated test variants
2021-04-14 09:21:31 +02:00
Daniel Agar
ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)
...
- include icm20948 on most boards by default
- create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
2021-04-04 21:18:16 -04:00
David Sidrane
f63f1f3969
holybro durandal-v1:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
David Sidrane
2fcdadfbd1
holybro_durandal-v1:Enable UAVCAN
2021-04-03 12:47:20 +02:00
Beat Küng
369d375417
holybro_can-gps-v1_debug: disable ekf & listener due to flash overflow
2021-04-01 08:35:36 -04:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
631d1647d3
boards: minimize unnecessary differences in default variants
2021-03-28 14:46:47 -04:00
Daniel Agar
e58af90bac
boards: holybro can-gps-v1 create separate default and debug variants
2021-03-28 12:39:22 -04:00
Daniel Agar
e77bffe582
boards: STM32H7 remove CONFIG_MM_REGIONS=3
2021-03-26 17:40:44 -04:00
David Sidrane
4eabee00d6
holybro durandal-v1:Properly configure BDMA
2021-03-23 05:52:27 -07:00
David Sidrane
3581099c09
Revert "boards: disable BDMA on STM32H7 for now"
...
This reverts commit f0d1f1d679
2021-03-23 05:52:27 -07:00
David Sidrane
216959e221
holybro durandal-v1:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
Daniel Agar
00016e53fa
boards: holybro/kakutef7 disable CONSTRAINED_FLASH to increase optimization
2021-03-16 10:30:32 +01:00
Daniel Agar
4b99bd2077
boards: remove optional external ADIS IMUs to save flash
2021-03-15 13:37:24 -04:00
Daniel Agar
2257c3767e
simple gyro auto calibration module
2021-03-15 09:46:47 +01:00
Daniel Agar
f8eaa6e46b
ROMFS handle bl_update generically
...
- include all available legacy bootloaders
2021-03-11 00:38:18 +01:00
Daniel Agar
4d288512b5
add board architecture specific init defaults
2021-03-09 19:59:41 +01:00
Daniel Agar
a0b9b44ff6
boards: stm32h7 set CONFIG_SDMMC1 consistently
2021-03-09 09:37:05 -05:00
David Sidrane
c2a5b5ed88
holybro_durandal-v1:Use Auto LSE Drive setting
2021-03-05 15:40:09 -05:00
Daniel Agar
19de1e57e3
gyro_fft promote to modules and include on all boards
2021-03-05 10:56:54 -05:00
Beat Küng
7e33d03470
drivers: remove tap_esc
...
- it's not used anymore
- it would need a refactoring to use mixer_module
2021-02-25 09:28:37 -05:00
David Sidrane
fd0494555c
canbootloader:stm32_boarddeinitialize->board_deinitialize
2021-02-24 19:20:15 +01:00
David Sidrane
dd736f8540
holybro_can-gps-v1:Ensure yeild is used for FLASH programing
2021-02-23 17:45:25 -05:00
Daniel Agar
11ad41f7cb
delete old imu/mpu6000 driver
2021-02-23 15:58:36 -05:00
Daniel Agar
cd7713eba2
boards: delete unused variants
2021-02-22 20:08:36 -05:00
Daniel Agar
414f9f81d9
move fake GPS to standalone module
2021-02-20 14:13:36 -05:00
David Sidrane
174f2624df
holybro_can-gps-v1:board_id uses as Uavcan HW version
2021-02-17 22:47:35 -05:00
David Sidrane
070db73e91
holybro_can-gps-v1:Use common uavcan board identity
2021-02-17 22:47:35 -05:00
Daniel Agar
ab0d0fd0be
uORB move to PX4 platform layer
2021-02-17 11:25:56 -05:00
Daniel Agar
44df0fb7a2
Analog Devices ADIS16448 rewrite
...
- new IMU driver structure with state machine (no sleeps in bus thread)
- verify all configured registers and trigger reset on failure
- detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
- don't use CRC-16 on burst transfers except for verified lots
2021-02-16 10:29:07 +01:00
Daniel Agar
fb2a199621
delete unmaintaned mkblctrl driver
2021-02-14 10:38:15 +01:00
Daniel Agar
a257120e8d
boards: use new param default mechanism
2021-02-12 08:27:47 -05:00
Daniel Agar
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
Daniel Agar
d67a84d941
boards: holybro can-gps-v1 fix bosch bmm150 path
2021-02-06 15:56:11 -05:00
David Sidrane
8167023dfb
holybro_can-gps-v1: Reorder Sensor Startup for reliabiltiy
2021-02-05 19:55:16 -05:00
David Sidrane