* tla2528 basic implementation (restarting driver still fails)
* fixed probe function, restarting driver now works
* -added reset call to init
-added return value checks on all important transfers and retry if failed when possible
-removed comments
-removed unnecessary parameters of module
* Introduced initialization-states that can be executed multiple times on failure
* Added one more state s.t. init() only does probing
* added communication error count _comms_errors
* use get() instead of param_find
* changed scheduling interval
* start in reset state. check second byte in probe. add 2 retries to probe function
* add space in front of comments
* jump to reset state when another state fails
* changed SAMPLE_INTERVAL to 10_ms
* added static assert on number of channels in adc_report
MCP9808: Replaced PX4_INFO with PX4_DEBUG
MCP9808: Update date in headers
MCP9808: Define functions before variables
MCP9808: Increase logging interval for sensor_temp
MCP9808: Removed extra space
MCP9808: Remove this->
- Remove enum class Register : uint8_t
- Explicitly initialize buffer
- Explicitly initialize temp_raw
- Rename uorb publisher
- Remove overide from print_status()
- Take timestamp after read, correct measurement_time to uint64 and use hrt_elapsed_time()
- Remove exit_and_cleanup
- Move functions out of main + cleanup whitespace
MCP9808: remove exit_and_cleanup
MCP9808: Take timestamp after read, correct measurement_time to uint64 and use hrt_elapsed_time()
MCP9808: remove overide from print_status()
MCP9808: rename uorb publisher
MCP9808: explicitly initialize temp_raw
MCP9808: explicitly initialize buffer
MCP9808: Remove enum class Register : uint8_t
MCP9808: move functions out of main + cleanup whitespace
Using the SF30/d with the legacy protocol caused a delay of the
measurements of ~1s. This is not the case with the binary protocol anymore.
The initialization sequence used for SF20/c did not work and is therefore
updated.
Tested on both SF20/c and SF30/d.
-add new NAVIGATION_STATE_ALTITUDE_VOYAGER
-this mode does require manual control to enter
-but you can disable the manual control loss failsafe to continue
flying in case of manual control loss
-for MC: in throttle and yaw are controlled like in Altitude mode,
the tilt is controlled via integrated rate input (similar to Acro,
but with tilt limit)
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
* Add new INS driver sbgECom
Implement sbgECom messages handling to provide IMU sensors, GNSS and EKF data to the autopilot
Be able to parametrize the serial port, baudrate and the communicating mode
Clone sbgECom library only if sbgecom support is enabled and apply a patch
Be able to send SBG Systems INS settings in several ways when starting sbgecom driver
* Fix sensor airspeed simulator units
* Fix HIGHRES_IMU pressure unit
* Allow HIGHRES_IMU to support 4 IMUs
* sbgECom: Add documentation
* Use submodule instead of fetching sbgECom using CMake
* Remove patch strategy
* Fix dates
* Remove patch file
* Update SBG dev type ID
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
---------
Co-authored-by: Samuel Toledano <samuel.toledano@sbg-systems.com>
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
* Create a dummy BAHRS driver
* Resolve compilation
* Switch back to cpp, fix compilation
* Create module.yaml
* Implement required module APIs and open serial port
* Revise info and error messages
* Poll serial port
* Push received bytes into the ring buffer
* Process data buffer (1)
* Process data buffer (2)
* Process data buffer (3)
* Process data buffer (4)
* Process data buffer (5)
* Process data buffer (6)
* Implement and use initialize() and deinitialize() methods
* Implement print_usage() and print_status()
* Collect all config constants in a class
* Put info about next found message into a class
* Print CRC failure count
* Remove unneeded print
* Add comments
* Disable EKF2, advertise vehicle attitude
* Decode and publish BAHRS signals (1)
* Run the driver as an additional source of sensor signals
* Add tiny noise to baro-inertial pressure signal
* Fix the sensor ID
* Add copyrights
* Fix formatting
* Remove redundant newline character
* Fix long parameter name
* Fix findings (1)
* Fix finding (2)
* Fix formatting
* Fix the timeout value
* Remove aliases
* Fix copyright
* Fix indent
* Comply with naming convention
* Rework comparison to false
* Reduce nesting (1)
* Reduce nesting (2)
* Reduce nesting (3)
* Fix BAHRS sensor ID
* always reschedule from measurementReadyCallback, don't update range mode is processMeasurement fails, reschedule trigger faster if Argus_TriggerMeasurement fails, refactor mode switching logic, update perf counters
* make format
* make format exclude microstrain submodule
---------
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Niklas Hauser