fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-21 03:03:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
33,384 Commits 852 Branches 161 Tags
98c8cbb27fca8a2e3876e1eee7defd68df136721
Commit Graph
132 Commits
Author SHA1 Message Date
Tanja Baumann b5ebdb8e41 add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane b83fdfda37 px4_fmu-v5x: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 733c1b747b px4_fmu-v5x: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane acea295d5a px4_fmu-v5x Updates for NuttX 9.1.0- 
px4_fmu-v5x: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi 28a6e82698 Introduce new generic ADC driver for ADS1115 chip (#14437) 2020-09-14 11:03:40 -04:00
SalimTerryLi c037dbef21 Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
David Sidrane 329ed6e273 px4_fmu-v5/v5x: Re-enable TXDMA 2020-08-11 12:27:28 -04:00
Beat Küng ca189fefb7 v5x: use board-specific camera capture pin PI0 2020-08-04 13:37:40 +02:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Beat Küng 03e51076b0 v5x: fix icm20602 sensor orientation 
and reorder baro startup, so that the other one is used by default.
 2020-07-06 11:02:48 +02:00
Daniel Agar 13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
David Sidrane 0bb8d7a065 px4_fmu-v5x p4 (-06) default to suporting LAN8742Ai 2020-06-09 08:12:44 +02:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
David Sidrane 626895eadc px4_fmu-v5x:Wrong Bit was being tested for mode. 
@TSC21  - this will fix you build
 2020-06-05 18:59:48 -04:00
Julian Kent dd9c82eb20 systemcmds/gpio: Add nsh command to manipulate/read GPIO 
* Add basic GPIO test app for R/W on pins from nuttx shell
* Add gpio command to fmu-v3 and fmu-v4
* Sanitize gpio commands by pin configs, --force to override
 2020-05-23 11:47:40 -04:00
David Sidrane 04db5391fc px4_fmu-v5x:Fix PG11 assignment 2020-05-23 11:46:00 -04:00
David Sidrane b2153c7f2f px4_fmu-v5x:PG6 is free GPIO 2020-05-23 11:46:00 -04:00
David Sidrane 7f84ed57dd px4_fmu-v5x:Using SE050 not A71CH 2020-05-23 11:46:00 -04:00
David Sidrane 637578b8be px4_fmu-v5x:Correct trace connector description 2020-05-23 11:46:00 -04:00
Beat Küng 9c6f42a867 v5x defconfig: increase TELEM2 UART TX buffer size to 3000 
Required for very high-rate log streaming @3MBit baudrate.
 2020-05-20 09:12:50 +02:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Beat Küng 34c75f2d36 boards: temporarily disable UART TX DMA 
work-around for https://github.com/PX4/Firmware/issues/14659.
This can be reverted when fixed properly.
 2020-04-27 08:47:46 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 66eacd24bc px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Beat Küng 68e1172bb5 px4/v5x: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Daniel Agar a89bba470a boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling 
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
 2020-04-08 13:20:54 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Julian Oes 509b8b6b4b First skeleton for esc_battery module 2020-04-06 15:56:54 +02:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng 3423809cd9 refactor ism330dlc: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 54da4997ad refactor bmi088: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426 boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
Beat Küng 8ebde51648 refactor hmc5883: use driver base class 
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
 2020-03-17 23:31:17 -04:00
Beat Küng 47b329cc54 refactor bmm150: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 832ccd262e refactor ina226: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 985bb2adc9 refactor bmp388: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng be0a205438 refactor ist8310: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agar 0ce9e113ff boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32 2020-03-11 22:08:37 -04:00
Beat Küng 179c89b6bd board configs: extend board_dma_map.h with a table 2020-03-11 22:08:37 -04:00
Daniel Agar bd16c2b4f6 px4_fmu-v5x: add board_dma_map.h and enable SPI{1,2,3} DMA 2020-03-11 22:08:37 -04:00