8470105f9e
lsm303d: fixed build warning
2015-01-01 10:04:09 +11:00
7864958f1c
l3gd20: fixed build warning
2015-01-01 10:04:07 +11:00
82b9e08e4c
mpu6000: removed unsafe printf in interrupt context
...
instead delay 3ms between register writes. This seems to give a quite
high probability of correctly resetting the sensor, and does still
reliably detect the sensor going bad, which is the most important
thing in this code
2015-01-01 08:51:57 +11:00
b5f6fedfa8
lsm303d: show all perf counters in "info"
2015-01-01 08:51:54 +11:00
083d9e3e69
lsm303d: check DRDY after check_registers()
...
this allows recovery from a state where DRDY is not set
2015-01-01 08:51:52 +11:00
1de7fab974
lsm303d: removed unsafe printf in interrupt context
2015-01-01 08:51:49 +11:00
e4318345f3
lsm303d: added two more checked registers
...
these are key for DRDY behaviour
2015-01-01 08:51:47 +11:00
2ac3a6fcf4
l3m303d: added testerror command
...
useful for testing error handling
2015-01-01 08:51:44 +11:00
5c1da70d0c
l3gd20: fixed reporting of error count
2015-01-01 08:51:42 +11:00
1bb3974c84
l3gd20: check DRDY after check_registers() is called
...
this allows us to recover from an error that disables data ready
2015-01-01 08:51:40 +11:00
8db2066151
l3gd20: removed printf in interrupt context
...
this is not safe
2015-01-01 08:51:37 +11:00
353ea9beac
l3gd20: added testerror command
...
useful for testing error handling
2015-01-01 08:51:34 +11:00
a8cea3a4da
l3gd20: use the I2C disable bit on l3gd20H
...
this seems to prevent a mpu6000 reset from causing an issue on the
l3gd20H
2014-12-30 20:55:57 +01:00
b455d647b2
l3gd20: added "l3gd20 regdump" command
2014-12-30 20:55:57 +01:00
4a81384b2d
mpu6000: make register fixup much closer to a reset()
...
this may help automatic reset on the faulty boards
2014-12-30 20:55:57 +01:00
e537de20e3
mpu6000: wait for 10ms after a full reset
...
this prevents the mpu6000 getting in a really weird state!
2014-12-30 20:55:57 +01:00
333039d3db
mpu6000: added "mpu6000 testerror" command
...
used to generate a error case for reset testing
2014-12-30 20:55:57 +01:00
b157466608
mpu6000: monitor some more registers
2014-12-30 20:55:57 +01:00
e5d3c80686
mpu6000: added factory self-test function
...
this follows the factory calibration self-test method in the datasheet
to see if the sensor still has the same calibration it had in the factory
2014-12-30 20:55:57 +01:00
ca47952281
l3gd20: added register checking
...
this checks at runtime that key registers have correct values
2014-12-30 20:55:57 +01:00
ae3a92569d
mpu6000: try resetting the mpu6000 up to 5 times
...
this mirrors the ardupilot driver. We have seen situations where the
mpu6000 on the Pixhawk comes up in SLEEP mode, despite a reset
2014-12-30 20:55:57 +01:00
03c40d5d91
lsm303d: replace old register checking with new check_registers() method
...
this uses the same method as is now used in the MPU6000 to check that
the sensor retains its correct values
Conflicts:
src/drivers/lsm303d/lsm303d.cpp
2014-12-30 20:55:57 +01:00
3e06a65516
mpu6000: monitor some key registers for correct values
...
this will catch both bad SPI bus comms and a sensor that has been
reset causing incorrect configuration.
2014-12-30 20:55:57 +01:00
32bfc6cdb8
Minor re-addition
2014-12-30 16:32:16 +05:30
ce03794eca
Merge remote-tracking branch 'upstream/master' into flow_orient
...
Conflicts:
src/drivers/px4flow/px4flow.cpp
2014-12-30 16:23:52 +05:30
7bed5b382f
Clean up docs in PX4FLOW driver
2014-12-30 10:28:35 +01:00
c4e3577476
batt_smbus: add search
2014-12-30 13:43:23 +09:00
a952a18b42
batt_smbus: add get_PEC
2014-12-30 13:43:21 +09:00
65bcd0e122
batt_smbus: minor format fix
2014-12-30 13:43:18 +09:00
78b9e06a15
batt_smbus: remove redundant ORB_DECLARE
2014-12-30 13:43:15 +09:00
b8e818b387
batt_smbus: remove sleep before I2C transfer
2014-12-30 13:43:13 +09:00
df9547e9d3
batt_smbus: driver for smart battery
2014-12-30 13:43:11 +09:00
ac9e9835ac
i2c: const get_address
2014-12-30 13:43:08 +09:00
33653b25c6
fix Z rotation
2014-12-27 23:25:08 +05:30
11a14c2c3d
Add rotation switching to flow from mavlink
2014-12-27 23:16:09 +05:30
d40168dc4b
Add support for rotations of PX4flow
2014-12-27 23:01:31 +05:30
e952324fbf
Rework HoTT into a proper library, which fixes parallel build breakage
2014-12-26 20:25:31 +01:00
da977bb39b
Added HMC chip select support
2014-12-26 19:55:58 +01:00
407889ea2c
Merged master into indoor branch
2014-12-26 17:06:19 +01:00
6fae021a00
Merge pull request #1527 from dagar/Werror
...
turn on -Werror and fix resulting errors
2014-12-25 17:44:44 +01:00
9292c8f405
add interrupt latency printout command and mean/variance to interval performance counter
2014-12-24 14:06:05 -07:00
d511e39ea7
turn on -Werror and fix resulting errors
2014-12-22 17:56:59 -05:00
1910b7e88b
MPU6000: Add regdump command
...
Add mpu6000 regdump command for debugging mpu6000.
2014-12-21 14:59:47 +01:00
dfc368ad46
Merge pull request #1497 from PX4/ll40lsdefaultmax
...
ll40ls: max distance according to datasheet
2014-12-14 13:14:23 +01:00
b6b80dcac1
ll40ls: write min and max to report
2014-12-14 12:10:29 +01:00
0575f67300
ll40ls: fix whitespace
2014-12-14 12:10:29 +01:00
cc2dae23f9
trone: write min and max to report
2014-12-14 12:10:29 +01:00
834ff85930
trone: fix whitespace
2014-12-14 12:10:28 +01:00
8fd9f98904
sf0x: write min and max to report
2014-12-14 12:10:28 +01:00
8ebe463f16
sf0x: fix whitespace
2014-12-14 12:10:28 +01:00
Andrew Tridgell