Beat Küng
7aed8c4f47
sd_bench: print errno on write failure
2021-12-10 09:03:08 -05:00
Beat Küng
80300c36b4
parameter units: add 'A' (Ampere)
2021-12-10 09:03:08 -05:00
Igor Mišić
d1aec01b86
uavcan/actuators: stop update esc status if there is no UAVCAN ESCs
2021-12-10 09:03:08 -05:00
Beat Küng
0d1d454a4c
mavlink: add missing 'sensor_calibration' lib dependency
2021-12-10 09:03:08 -05:00
alexklimaj
31af09f8e7
Fix uavcan distance sensor not being logged
2021-12-10 07:19:34 +01:00
Silvan Fuhrer
24d871f792
FW land detector: tighten thresholds in airspeed-less case
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2021-12-09 20:55:09 -05:00
Thomas Debrunner
ade4a1930c
trajectory-planning: Added option for PositionSmoothing library with single target waypoint that disables L1 guidance
2021-12-09 20:51:39 -05:00
Daniel Agar
08ee3208b2
mavlink: stop_command fix potential dead lock
2021-12-09 20:40:55 -05:00
Thomas Stastny
95222baa33
fix incorrect L1 period param documentation ( #18811 )
...
* fix incorrect L1 period param documentation
* reduce minimum L1 period
2021-12-08 16:42:50 +01:00
Daniel Agar
8b1543e3b0
mavlink: destroy all instances fix potential dead lock
2021-12-08 09:30:39 -05:00
Silvan Fuhrer
b00ebe53bb
FlightTaskAuto: use MPC_VEL_MAX instead of MPC_XY_CRUISE for emergency braking thresholds
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2021-12-08 09:13:01 +01:00
Daniel Agar
51c0e5553e
vmount: adjust MNT_RANGE_PITCH and MNT_RANGE_ROLL defaults
...
- this seems like a much more reasonable default
2021-12-08 01:02:46 -05:00
Daniel Agar
3b94742117
vmount: adjust timeout 50 -> 20 ms (50 Hz)
2021-12-08 01:02:46 -05:00
Julian Oes
9cb2bf389c
vmount: add param to use RC input for angular rate
...
Until now RC input was translated to angles only. I added the param
MNT_RC_IN_MODE which allows the RC input to be used for angular rate.
2021-12-08 01:02:46 -05:00
Daniel Agar
08b0ac9654
dataman: retry file read/write failures and report seek errors
2021-12-07 17:03:07 -05:00
Matthias Grob
495f1c9165
battery: don't initialize _source without constructor
2021-12-07 21:06:51 +01:00
Matthias Grob
68e2940f58
math: support max of three values additional to min and use it everywhere
2021-12-07 21:06:51 +01:00
Matthias Grob
e8676fe87a
BATTERY_STATUS: improve filling cell voltage
...
according to review comment
2021-12-07 21:06:51 +01:00
Matthias Grob
b41e345a5b
battery: correct updateBatteryStatus() description
2021-12-07 21:06:51 +01:00
Matthias Grob
ee3bc6673a
AnalogBattery: make update variables const
2021-12-07 21:06:51 +01:00
Matthias Grob
fdc40880d0
battery: separate out publishing from updating
...
to allow smart battery drivers to use the battery class and
filling in additional information in case it makes sense.
2021-12-07 21:06:51 +01:00
Matthias Grob
e70d70468a
battery: pass voltage and current by setter
2021-12-07 21:06:51 +01:00
Matthias Grob
39641494da
battery: pass connected flag in by setter
2021-12-07 21:06:51 +01:00
Matthias Grob
38d23f5345
battery: pass priority in by setter
2021-12-07 21:06:51 +01:00
Matthias Grob
f9fc9a9af6
battery: pass source in by constructor
2021-12-07 21:06:51 +01:00
Matthias Grob
b965923c08
battery: fetch throttle value inside of class
2021-12-07 21:06:51 +01:00
Matthias Grob
ddc6b6bc9c
battery: move MAVLink specific handling out of battery class
2021-12-07 21:06:51 +01:00
Matthias Grob
da2fdf923e
battery parameters: allow usage of 1S battery
2021-12-07 21:06:51 +01:00
Daniel Agar
7185bb3243
vmount: output rc simple protections
2021-12-07 13:11:22 +01:00
bresch
c947562183
ekf: get rid of intermediate variable "fuse_height"
2021-12-07 09:16:21 +01:00
bresch
9651f78b0a
ekf: centralize the height fusion decision
2021-12-07 09:16:21 +01:00
bresch
d583ef6b79
ekf2: move height fusion code to separate source file
2021-12-07 09:16:21 +01:00
Daniel Agar
01e60e853e
navigator: increase stack slightly
2021-12-06 15:10:50 -05:00
Daniel Agar
41378fcef9
ms5611: lower SPI clock 20 MHz -> 16 MHz
...
- this was necessary to get the secondary ms5611 working reliably on a
particular CubeOrange
- the sensor is transferring very little data, so lowering the speed by
default everywhere is harmless
2021-12-06 12:51:52 -05:00
Daniel Agar
8cd517f533
dataman: PX4_ERR on create_work_item failure
2021-12-06 10:23:42 -05:00
Daniel Agar
9ab633c18f
drivers/imu/invensense: check register bank during probe if necessary
...
- the WHO_AM_I is only accessible in register bank 0, which might not
be currently selected if the sensor didn't have a clean reset
2021-12-06 10:22:54 -05:00
Daniel Agar
4bf1b46e47
boards: free up flash on crazyflie and omnibus
2021-12-06 09:37:08 -05:00
Daniel Agar
1f6acd0171
parameters: add simple backup and restore mechanism
2021-12-06 09:37:08 -05:00
Daniel Agar
674b92df18
parameters: sleep 10 ms before retrying a failed import/export
2021-12-06 09:37:08 -05:00
Daniel Agar
7bfebf5289
parameters: add param dump to read and decode bson to console
2021-12-06 09:37:08 -05:00
Daniel Agar
7560d45c61
parameters: import tolerate unhanlded BSON types
2021-12-06 09:37:08 -05:00
Daniel Agar
1af068179e
parameters: tinybson print errors and count imported types
2021-12-06 09:37:08 -05:00
Silvan Fuhrer
ba1526896d
Navigator: VTOL: remove generate_waypoint_from_heading()
...
The FW Position controller sets the wp to be tracked during a
VTOL front transition, the coordinates sp set here weren't used.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2021-12-06 16:30:59 +03:00
Matthias Grob
10ceea2fe6
geo: refactoring on comments and usage
2021-12-06 14:30:14 +01:00
Thomas Debrunner
8db7a6225b
geo: Moved the map_projection_* functions and state into a self-contained C++ class
2021-12-06 14:30:14 +01:00
Daniel Agar
fe23718e2c
drivers/gps: require valid device to start
2021-12-06 08:44:50 +01:00
Daniel Agar
58421f2edc
Update submodule GPS drivers to latest Fri Dec 3 12:38:58 UTC 2021
...
- GPSDrivers in PX4/Firmware (3e0d06c65167c0bd79c193ea75ca5c7959053ff7): https://github.com/PX4/PX4-GPSDrivers/commit/bd72eb6794e8fb4f2ed3e47311a14c2cec69f60b
- GPSDrivers current upstream: https://github.com/PX4/PX4-GPSDrivers/commit/d6940d9c8ccb8ab3273c677097a29d46903021ff
- Changes: https://github.com/PX4/PX4-GPSDrivers/compare/bd72eb6794e8fb4f2ed3e47311a14c2cec69f60b...d6940d9c8ccb8ab3273c677097a29d46903021ff
d6940d9 2021-12-02 alexklimaj - Update F9P moving base with direct UART2 connection
eb0cb58 2021-11-25 sebastian - always using groundspeed for vel_m_s in ubx driver
0408160 2021-11-18 alexklimaj - Remove extra UART1 baudrate set
2021-12-05 19:23:07 -05:00
Daniel Agar
10f2564ae8
systemcmds/tests: dataman test use proper signed type for dm_read() return
2021-12-05 18:08:54 -05:00
Daniel Agar
37c1598f38
boards: cubepilot_cubeorange enable calib_udelay and run on test rack
2021-12-05 14:50:03 -05:00
PX4BuildBot
aae794965a
[AUTO COMMIT] update change indication
2021-12-05 11:03:58 -05:00